2AEDS110LTEWIFINetworking device

Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide 1 Citrix SD-WAN Quick Start Guide: 110 LTE WiFi Standard Edition (SE) Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide 2 Copyright and Trademark Notice Copyright © 2018 Citrix Systems, Inc. All rights reserved. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS OR USED TO MAKE DERIVATIVE WORK (SUCH AS TRANSLATION, TRANSFORMATION, OR ADAPTATION) W ITHOUT THE EXPRESS WRITTEN PERMISSION OF CITRIX SYSTEMS, INC. ALTHOUGH THE MATERIAL PRESENTED IN THIS DOCUMENT IS BELIEVED TO BE ACCURATE, IT IS PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE ALL RESPONSIBILITY FOR THE USE OR APPLICATION OF THE PRODUCT(S) DESCRIBED IN THIS MANUAL. CITRIX SYSTEMS, INC. OR ITS SUPPLIERS DO NOT ASSUME ANY LIABILITY THAT MAY OCCUR DUE TO THE USE OR APPLICATION OF THE PRODUCT(S) DESCRIBED IN THIS DOCUMENT. In no event shall Citrix, its agents, officers, employees, licensees or affiliates be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business information, loss of information) arising out of the information or statements contained in the publication, even if Citrix has been advised of the possibility of such loss or damages. INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. COMPANIES, NAMES, AND DATA USED IN EXAMPLES ARE FICTITIOUS UNLESS OTHERWISE NOTED. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. Pursuant to the rules and regulations of the Federal Communications Commission, changes or modifications to this product not expressly approved by Citrix Systems, Inc., could void your authority to operate the product. Note the FCC rules and regulations are not included for software products, such as virtual appliances. AppCache, AppCompress, AppDNA, App-DNA, AppFlow, AppScaler, Apptitude, Citrix, Citrix Access Gateway, Citrix Application Firewall, Citrix Cloud Center, Citrix Systems, Citrix XenApp, CloudGateway, CloudBridge, CloudPortal, CloudStack, EdgeSight, Flex Tenancy, HDX, ICA, MPX, nCore, NetScaler, NetScaler App Delivery Controller, NetScaler Access Gateway, NetScaler App Firewall, NetScaler CloudConnector, NetScaler Gateway, NetScaler SDX, SD-WAN, Netviewer, Network Link, SecureICA, VMLogix LabManager, VMLogix StageManager, VPX, Xen, Xen Source, XenApp, XenAppliance, XenCenter, XenClient, XenDesktop, XenEnterprise, XenServer, XenSource, Xen Data Center, and Zenprise are trademarks of Citrix Systems, Inc. and/or one of its subsidiaries, and may be registered in the U.S. Patent and Trademark Office and other countries. Other product and company names mentioned herein may be trademarks of their respective companies. Last Updated: April 2017 Citrix SD-WAN 110-LTE-WiFi-SE Quick Start Guide 3 Contents Contents ........................................................................................................................................................ 3 Quick installation and configuration ............................................................................................................. 4 Before you begin ........................................................................................................................................... 4 Citrix SD-WAN 110-LTE-WiFi-SE .................................................................................................................... 5 Appliance physical installation procedure and precautions ......................................................................... 9 Cautions .................................................................................................................................................... 9 Electrical safety precautions ..................................................................................................................... 9 Desktop mount the appliance ................................................................................................................. 10 Wall mount the appliance ....................................................................................................................... 10 Rack mount the appliance ...................................................................................................................... 11 Installing the LTE antennas ..................................................................................................................... 13 Connecting the appliance to a power source ......................................................................................... 14 Connecting the appliance to the network .............................................................................................. 14 Setting up the appliance ............................................................................................................................. 14 System specifications .................................................................................................................................. 17 Compliance ................................................................................................................................................. 19 Additional information ................................................................................................................................ 22 Citrix SD-WAN 110-LTE-WiFi-S…

Text truncated - open the document above for the full version.

Citrix Systems Inc. 4988 Great America Parkway Santa Clara, CA 95054 USA Date: April 1, 2020 Declaration We, Citrix Systems declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2AEDS110LTEWIFI If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! Perry Hovanic / Director of NPI Citrix Systems Tel: 4087908867 FAX: 4087908867 E-mail: [email protected]

Date: 2020-05-27 FCC ID: 2AEDS110LTEWIFI Declaration We, CITRIX SYSTEMS,INC, declare that the device, FCC ID: 2AEDS110LTEWIFI, Model Name: SD-WAN 110-LTE-WiFi, will contain the certified module (FCC ID: XMR201903EG25G). The certified module has not been modified anywhere and is identical to the original certified condition, thus, original certified data continues to be applicable and representative of this application. Accordingly, only spot-check tests were performed and recorded in the host test report for verification purposes. The detailed identifiers of the original reports which applicable to this application listed below: Test Report Number WWAN Module (XMR201903EG25G) HR/2019/1001601_RF HR/2019/1001602_RF Exposure Report Appendix A.1/A.2/A.3_EUT Photo, Test setup Appendix B.2~B.13 WCDMA, LTE test reports Also, the device for WLAN function will enable only 2.4GHz, 5.0GHz UNII-1 and UNII-3 function through the applicant’s proprietary firmware and is not user changeable. Thank you for your attention. Sincerely yours, ----------------------------------- Perry Hovanic /SR. Director Materials & NPI SCM Citrix Systems Tel/Fax: 4087908867 E-mail: [email protected]

Citrix Systems Inc. 4988 Great America Parkway Santa Clara, CA 95054 USA Date:April 1, 2020 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: 2AEDS110LTEWIFI To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Software Operational Description Parts List Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. External Photos Internal Photos Test Setup Photos Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Perry Hovanic / Director of NPI Citrix Systems Tel: 4087908867 FAX: 4087908867 E-mail: [email protected]

Citrix Systems Inc. 4988 Great America Parkway Santa Clara, CA 95054 USA Date: 2020-04-01 FCC ID: 2AEDS110LTEWIFI AUTHORIZATION LETTER To Whom It May Concern: Citrix Systems hereby authorizes Joanna Hung / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu or Joanna Hung / Specialist of BV CPS Taoyuan on Citrix Systems ’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Perry Hovanic / Director of NPI Citrix Systems Tel: 4087908867 FAX: 4087908867 E-mail: [email protected]

Reference No.: 191211C28 Page 1 of 5 CONSTRUCTION PHOTOS OF EUT Model: SD-WAN 110-LTE-WiFi / Brand: Reference No.: 191211C28 Page 2 of 5 Reference No.: 191211C28 Page 3 of 5 Reference No.: 191211C28 Page 4 of 5 Reference No.: 191211C28 Page 5 of 5

Page 1 of 5 1 Photographs - EUT Constructional Details FCC ID.: XMR201903EG25G Test PCB board Photo EG25-G Page 2 of 5 Page 3 of 5 EG25-G MINIPCIE Page 4 of 5 Page 5 of 5

FCC ID: 2AEDS110LTEWIFI IC: 20012-110LTEWIFI Model：SD-WAN 110-LTE-WiFi

Label sample: SD-WAN 110-LTE-WiFi

Reference No.: 191211C28 Page 1 of 9 CONSTRUCTION PHOTOS OF EUT Model: SD-WAN 110-LTE-WiFi / Brand: Reference No.: 191211C28 Page 2 of 9 Reference No.: 191211C28 Page 3 of 9 Reference No.: 191211C28 Page 4 of 9 Reference No.: 191211C28 Page 5 of 9 Reference No.: 191211C28 Page 6 of 9 Reference No.: 191211C28 Page 7 of 9 Reference No.: 191211C28 Page 8 of 9 Reference No.: 191211C28 Page 9 of 9

1 Photographs - EUT Constructional Details FCC ID.: XMR201903EG25G EG25-G This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. EG25-G MINIPCIE This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

Report No.: SA191211C28 R1 Page No. 1 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 RF Exposure Report Report No.: SA191211C28 R1 FCC ID: 2AEDS110LTEWIFI Test Model: SD-WAN 110-LTE-WiFi Received Date: Dec. 11, 2019 Date of Evaluation: Feb. 27, 2020 Issued Date: Mar. 02, 2020 Applicant: CITRIX SYSTEMS,INC Address: 4988 Great America Parkway Santa Clara,CA 95054 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191211C28 R1 Page No. 2 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191211C28 R1 Page No. 3 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 Release Control Record Issue No. Description Date Issued SA191211C28 Original Release Feb. 03, 2020 SA191211C28 R1 1. Add FCC ID of WLAN module 2. Remove WLAN 5GHz Band 2 & 3 3. Update WWAN antenna gain 4. Update WLAN power & recalculate MPE Mar. 02, 2020 Report No.: SA191211C28 R1 Page No. 4 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 1 Certificate of Conformity Product: Networking device Brand: Test Model: SD-WAN 110-LTE-WiFi Sample Status: Engineering Sample Applicant: CITRIX SYSTEMS,INC Date of Evaluation: Feb. 27, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance : KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 02, 2020 Rona Chen / Specialist Approved by : , Date: Mar. 02, 2020 Dylan Chiou / Senior Project Engineer Report No.: SA191211C28 R1 Page No. 5 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. The WWAN module (Brand: Quectel, Model: EG25-G, EG25-G MINIPCIE) was installed in EUT. Report No.: SA191211C28 R1 Page No. 6 / 7 Report Format Version: 6.1.1 Cancels and replaces the report No. SA191211C28 dated Feb. 03, 2020 2.4 Calculation Resu…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1001602 Page: 1 of 7 Authorized Signature: Derek Yang Wireless Laboratory Manager Cover PRF Exposure Evaluation Report Application No.: HR/2019/10016 Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Factory: Quectel Wireless Solutions Co., Ltd. Address of Factory: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China EUT Description: LTE Module Model No.: EG25-G, EG25-G MINIPCIE Trade Mark: Quectel FCC ID: XMR201903EG25G Standards: 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C Date of Receipt: 2019/1/30 Date of Test: 2019/1/31 to 2019/2/28 Date of Issue: 2019/2/28 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1001602 Page: 2 of 7 1 Version Revision Record Version Chapter Date Modifier Remark 00 2019/2/28 Original Authorized for issue by: 2019/2/28 Mike Hu /Project Engineer 2019/2/28 David Chen /Reviewer Reamark: The difference between EG25-G and EG25-G MIMIPCIE: EG25-G and EG25-G MINIPCIE both are LTE modules(Category: Cat.4). They have the same frequency and use the same chipset and share the same software & hardware design. EG25-G MINIPCIE makes up of EG25-G module and PCIe carrier board.No any other internal changes in EG25-G module. We hereby state that two models are identical in interior structure and components, and just connector interface is different for the marketing requirement. According to the difference above, all the tests were performed on EG25-G, and the data of EG25-G MINIPCIE can refer to EG25-G. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1001602 Page: 3 of 7 Contents 1 VERSION ................................................................................................................................................................. 2 2 GENERAL INFORMATION .................................................................................................................................. 4 2.1 CLIENT INFORMATION ..................................................................................................................................... 4 2.2 TEST LOCATION .............................................................................................................................................. 4 2.3 TEST FACILITY ................................................................................................................................................. 4 2.4 GENERAL DESCRIPTION OF EUT .................................................................................................................... 5 2.5 TEST MODE ..................................................................................................................................................... 5 3 RF EXPOSURE EVALUATION ........................................................................................................................... 6 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ................................................................................................. 6 3.1.1 Limits .......................................................................................................................................................... 6 3.1.2 Test Procedure ......................................................................................................................................... 6 3.1.3 EUT RF Exposure Evaluation ................................................................................................................ 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1001602 Page: 4 of 7 2 General Information 2.1 Client Information Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Factory: Quectel Wireless Solutions Co., Ltd. Address of Factory: 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China 2.2 Test Location Company: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address: No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China Post code: 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 E-mail: [email protected] 2.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Re…

Text truncated - open the document above for the full version.

Report No.: RF191211C28-6 R1 Page No. 1 / 59 Report Format Version: 6.1.1 Cancels and replaces the report no.: RF191211C28-6 dated on Mar. 04, 2020 FCC Test Report (Co-Located) Report No.: RF191211C28-6 R1 FCC ID: 2AEDS110LTEWIFI Test Model: SD-WAN 110-LTE-WiFi Received Date: Dec. 11, 2019 Test Date: Feb. 05, 2020 ~ Mar. 03, 2020 Issued Date: Apr. 07, 2020 Applicant: CITRIX SYSTEMS,INC Address: 4988 Great America Parkway Santa Clara,CA 95054 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191211C28-6 R1 Page No. 2 / 59 Report Format Version: 6.1.1 Cancels and replaces the report no.: RF191211C28-6 dated on Mar. 04, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity .................................…

Text truncated - open the document above for the full version.