2AEEM97392Hang-A-Round Speaker & Speakerphone

Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ƔReorient or relocate the receiving antenna. ƔIncrease the separation between the equipment and receiver. ƔConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ƔConsult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by PAYA GROUP LIMITEDmay void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

PAYA GROUP LIMITED Baishen Building, Dongshen Section, Jinhong Road, Xinxi Town, Longhu District, Shantou City, Guangdong Province, China TEL: +86-754-86204818 FAX: +86-754-85769308 DATE 11-04-2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AEEM973 92 Product Name: Hang-A-Round Speaker & Speakerphone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 11-04-2015 By: Selina Xie Signature Printed Title: Manager On behalf of : PAYA GROUP LIMITED Telephone: +86-754-86204818

PAYA GROUP LIMITED Baishen Building, Dongshen Section, Jinhong Road, Xinxi Town, Longhu District, Shantou City, Guangdong Province, China TEL: +86-754-86204818 FAX: +86-754-85769308 USB Port Statement FCC ID: 2AEEM97392 Date: Nov. 04, 2015 To whom it may concern: We, the undersigned, state that the device's (Model: 97303) USB port only used for charge, no any data transfer to PC. Sincerely, Selina Xie/Manager

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

FCC ID Label Information 1. Label location: 2. FCC ID Label: Model: 97392 FCC ID: 2AEEM973 92 FCCID Label Location

Photo 7 Photo 8 Photo 9 Photo 10 BT Ant

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Worse case is as below: [2402 MHz -2.432dBm（0.5712mW） output power] (0.5712mW /5mm) ·[√2.402 (GHz)]= 0.18 <3.0 for 1-g SAR Then SAR evaluation is not required

FCC RADIO TEST REPORT-BT FCC ID:2AEEM97392 ProductΚ Hang-A-Round Speaker & Speakerphone Trade Name Κ N/A Model NameΚ 97392 Serial ModelΚ N/A Report No.Κ NTEK-2015NT1028996F Prepared for PAYA GROUP LIMITED Baishen Building,Dongshen Section,Jinhong Road, Xinxi Town, Longhu District, Shantou City, Guangdong Province, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen P.R. China Tel.: +86-0755-61156588 Fax.: +86-0755-61156599 Website:www.ntek.org.cn  Page 2 of 64 Report No.:NTEK-2015NT1028996F TEST RESULT CERTIFICATION Applicant’s name ................. : PAYA GROUP LIMITED Address ................................. : Baishen Building,Dongshen Section,Jinhong Road, Xinxi Town, Longhu District, Shantou City, Guangdong Province, China Manufacture's Name ............ : Shenzhenshi Junengtong Electronics Co,Ltd. Address ................................. : 6/F, Building 5, Xifa Industrial Area A, Xixiang Yintian Industrial, Bao'an District, Shenzhen, Guangdong, China Product description Product name ........................... : Hang-A-Round Speaker & Speakerphone Model and/or type reference : 97392 Serial ModelΚ N/A Standards ............................. : FCC Part15.247: 15 Oct. 2015 Test procedure .............................. ANSI C63.10-2013 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personnel only, and shall be noted in the revision of the document. Date of Test ............................................ : Date (s) of performance of tests ............. : 28 Oct. 2015 ~30 Oct. 2015 Date of Issue ........................................... : 30 Oct. 2015 Test Result ............................................... : Pass Testing Engineer : (Allen Liu) Technical Manager : (Brown Lu) Authorized Signatory : (Sam Chen) ANSI C63.4-2014 & ANSI C63.10-2013 Page 3 of 64 Report No.:NTEK-2015NT1028996F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 9 2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BELOW 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30M – 1000 MHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 4 . NUMBER OF HOPPING CHANNEL 27 4.1 APPLIED PROCEDURES / LIMIT 27 4.1.1 TEST PROCEDURE 27 4.1.2 DEVIATION FROM STANDARD 27 4.1.3 TEST SETUP 27 4.1.4 EUT OPERATION CONDITIONS 27 4.1.5 TEST RESULTS 28 5 . AVERAGE TIME OF OCCUPANCY 29 5.1 APPLIED PROCEDURES / LIMIT 29 Page 4 of 64 Report No.:NTEK-2015NT1028996F Table of Contents Page 5.1.1 TEST PROCEDURE 29 5.1.2 DEVIATION FROM STANDARD 29 5.1.3 TEST SETUP 30 5.1.4 EUT OPERATION CONDITIONS 30 5.1.5 TEST RESULTS 31 6 . HOPPING CHANNEL SEPARATION MEASUREMENT 37 6.1 APPLIED PROCEDURES / LIMIT 37 6.1.1 TEST PROCEDURE 37 6.1.2 DEVIATION FROM STANDARD 37 6.1.3 TEST SETUP 37 6.1.4 EUT OPERATION CONDITIONS 37 6.1.5 TEST RESULTS 38 7 . BANDWIDTH TEST 40 7.1 APPLIED PROCEDURES / LIMIT 40 7.1.1 TEST PROCEDURE 40 7.1.2 DEVIATION FROM STANDARD 40 7.1.3 TEST SETUP 40 7.1.4 EUT OPERATION CONDITIONS 40 7.1.5 TEST RESULTS 41 8 . PEAK OUTPUT POWER TEST 47 8.1 APPLIED PROCEDURES / LIMIT 47 8.1.1 TEST PROCEDURE 47 8.1.2 DEVIATION FROM STANDARD 47 8.1.3 TEST SETUP 47 8.1.4 EUT OPERATION CONDITIONS 47 8.1.5 TEST RESULTS 48 9 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 54 9.1 DEVIATION FROM STANDARD 54 9.2 TEST SETUP 54 9.3 EUT OPERATION CONDITIONS 54 9.4 TEST RESULTS 55 10 . ANTENNA REQUIREMENT 62 10.1 STANDARD REQUIREMENT 62 10.2 EUT ANTENNA 62 11 . EUT TEST PHOTO 63 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 64 Report No.:NTEK-2015NT1028996F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(a)(1) Hopping Channel Separation PASS 15.247(b)(1) Peak Output Power PASS 15.247(c) Radiated Spurious Emission PASS 15.247(a)(iii) Number of Hopping Frequency PASS 15.247(a)(iii) Dwell Time PASS 15.247(a)(1) Bandwidth PASS 15.205 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report All test are according to ANSI C63.4-2014 & ANSI C63.10-2013 Page 6 of 64 Report No.:NTEK-2015NT1028996F 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y² UΔ where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2Δ providing a level of confidence of approximately 95 % Ζ No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Pag…

Text truncated - open the document above for the full version.