2AEGG-AIR80004G Module

Shanghai AirM2M Communication Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shanghai AirM2M Communication Technology Co., Ltd. Address: Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module FCC ID: 2AEGG-AIR8000 Model(s): Air8000, LuatOS FRN: 0031763733 2.911(d)(5)(i) Equipment Type We, [Shanghai AirM2M Communication Technology Co., Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Qing Peng Date: 2025.12.09 Title and Company name: Manager / Shanghai AirM2M Communication Technology Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shanghai AirM2M Communication Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shanghai AirM2M Communication Technology Co., Ltd. Address: Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module FCC ID: 2AEGG-AIR8000 Model(s): Air8000, LuatOS FRN: 0031763733 2.911(d)(5)(ii) Applicant filing We, [Shanghai AirM2M Communication Technology Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Qing Peng Date: 2025.12.09 Title and Company name: Manager / Shanghai AirM2M Communication Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shanghai AirM2M Communication Technology Co., Ltd. Address: Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module FCC ID: 2AEGG-AIR8000 Model(s): Air8000, LuatOS FRN: 0024457327 2.911(d)(7) USA Designated Agent for Service of Process We, [Shanghai AirM2M Communication Technology Co., Ltd.] (“the applicant”) designate [AOGES CO., LIMITED] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: AOGES CO., LIMITED USA Address: 1624 Market St., Ste 226, #30327 Denver CO, 80202 US FRN Number: 0033947847 Contact Name: XIAOYAN LAI Telephone No: +1 303 623 1940 Email: [email protected] Applicant Company name: Shanghai AirM2M Communication Technology Co., Ltd. Address: Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Grantee FRN Number: 0024457327 FCC Grantee Code: 2AEGG Contact Name: Qing Peng Telephone No: +86 13817338516 Email: [email protected] AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Signature: Title: General Manager Signature: Title: Manager Date:2025.12.09 Date: 2025.12.09 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shanghai AirM2M Communication Technology Co., Ltd. Agent Authorization Company name: Shanghai AirM2M Communication Technology Co., Ltd. Address: Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module FCC ID: 2AEGG-AIR8000 Model(s): Air8000, LuatOS FRN: 0031763733 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2025.12.09 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.

Shanghai AirM2M Communication Technology Co., Ltd. Authorization Letter We, (the approval holder) Company name Shanghai AirM2M Communication Technology Co., Ltd. Address Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China declare that the following representative (agent): Name (person) Bovey Yang Company name SHENZHEN STS TEST SERVICES CO.,LTD. Addresss 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub- District, Bao’an District, Shenzhen, Guang Dong, China City Shenzhen Country China to act on our behalf on all matters concerning the application and documents submitted to Nemko for product certification below Product Description 4G Module Type or Model(s) Air8000, LuatOS Brand Name Luat FCC ID 2AEGG-AIR8000 Attestation: Signature: Date: 2025.12.09 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.

2025.12.05 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO.,LTD./ A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District,Bao’an District, Shenzhen, Guang Dong, China/Jiankuai Li(Name of Agent company name and address, Name of Agent) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This appointment is valid until further December 31, 2026. Name: Jiankuai Li Title: PM E-mail:[email protected] Name/Title： Qing Peng/Manager Company: Shanghai AirM2M Communication Technology Co., Ltd. Phone: 13817338516 Fax: 021-50898266 E-Mail: [email protected]

Differences Description We Shanghai AirM2M Communication Technology Co., Ltd. state: Product： 4G Module Model Name： Air8000, LuatOS Brand Name： Luat The appearances, principles, and PCB hardware projects are all the same, Only difference in model name. Sincerely, Signature: Date: 2025-12-09 Name: Jiankuai Li Title: PM Company: SHENZHEN STS TEST SERVICES CO.,LTD.

Shanghai AirM2M Communication Technology Co., Ltd. FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Modular Transmitter Application Company name: Shanghai AirM2M Communication Technology Co., Ltd. Product Name: 4G Module FCC ID: 2AEGG-AIR8000 Model(s): Air8000, LuatOS Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: 2AEGG-AIR8000 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, with shielded The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes , All inputs to the modules are buffered through logic or microprocessor inputs. The module must contain power supply regulation on the module. Yes, A low drop out regulator is used for modular power supply regulation. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, Device is equipped with Rod-shaped antenna. The module must demonstrate compliance in a stand-alone configuration. Yes, distance between modular and all AEs are longer than 20cm, refer to setup photo. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Yes ,The modular has a permanent fixed label, and below statement was listed in the User Manual; The host device must be labeled to display the FCCID of the module Contains FCC ID: 2AEGG-AIR8000 Shanghai AirM2M Communication Technology Co., Ltd. FCC Modular Approval Request Rev 3.0 The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes ,The module comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee, Refer to test report and modular installation manual page 2. The module must comply with RF exposure requirements Yes, Transmitter meets MPE calculation of 47 CFR 1.1307 . Refer to MPE Reports and Refer to modular installation manual page 2. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules Page 4 2.3 Summarize the specific operational use conditions Page 4 2.4 Limited module procedures Page 4 2.5 Trace antenna designs Page 4 2.6 RF exposure considerations Page 5 2.7 Antennas Page 5 2.8 Label and compliance information Page 6 2.9 Information on test modes and additional testing requirements Page 6 2.10 Additional testing, Part 15 Subpart B disclaimer Page 6 Signature: Date: 2025.12.09 Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.

Shanghai AirM2M Communication Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025.12.09 Subject; Request for Confidentiality FCC ID: 2AEGG-AIR8000 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jiankuai Li Title: PM

FCC Label Model Name: Air8000 FCC ID: 2AEGG-AIR8000 20mm 20mm

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2510005H01 Issued for Shanghai AirM2M Communication Technology Co., Ltd. Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module Brand Name: Luat Model Name: Air8000 Series Model(s): LuatOS FCC ID: 2AEGG-AIR8000 Test Standard: FCC 47CFR §2.1091 Page 2 of 8 Report No.: STS2510005H01 TEST REPORT Applicant’s Name ................. : Shanghai AirM2M Communication Technology Co., Ltd. Address ................................. : Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Manufacturer's Name ........... : Shanghai AirM2M Communication Technology Co., Ltd. Address ................................. : Room 611, 6th Floor, No. 100 Xiuyan Road, Pudong New Area, Shanghai Product Description Product Name ........................ : 4G Module Brand Name .......................... : Luat Model Name .......................... : Air8000 Series Model(s) ...................... : LuatOS Test Standards ..................... : FCC 47CFR §2.1091 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 09 Oct. 2025 Date (s) of performance of tests ............. : 09 Oct. 2025 ~ 18 Nov. 2025 Date of Issue .......................................... : 18 Nov. 2025 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 8 Report No.: STS2510005H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 6 2. FCC 47CFR §2.1091 REQUIREMENT 7 2.1 TEST STANDARDS 7 2.2 LIMIT 7 2.3 TEST RESULT 8 Page 4 of 8 Report No.: STS2510005H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 18 Nov. 2025 STS2510005H01 ALL Initial Issue Page 5 of 8 Report No.: STS2510005H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name 4G Module Brand Name Luat Model Name Air8000 Series Model(s) LuatOS Model Difference Only difference in model name. Product Description The EUT is 4G Module Operation Frequency: 2.4G WLAN: 802.11b/g/n/ax 20: 2412~2462 MHz 802.11n/ax40:2422~2452MHz BLE: 2402~2480 MHz LTE Band 2:1850~1910MHz LTE Band 4:1710~1755MHz LTE Band 5:824~849MHz LTE Band 7:2500~2570MHz LTE Band 12:699~716MHz LTE Band 13:777~787MHz LTE Band 17: 704-716 MHz LTE Band 25:1850~1915MHz LTE Band 26 Part 90:814~824MHz LTE Band 26 Part 22:824-849 MHz LTE Band 38:2570-2620 MHz LTE Band 41:2496-2690 MHz LTE Band 66:1710~1780MHz LTE Band 71: 663-698 MHz Modulation Type: 2.4G WLAN: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM, 64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM, 64-QAM 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM BLE: GFSK LTE: QPSK /16QAM Antenna gain: 2.4G WLAN/BLE:2.63dBi LTE B2:2.21 dBi, LTE B4:2.06 dBi LTE B5:0.71 dBi, LTE B7:2.68 dBi LTE B12:0.59 dBi, LTE B13:0.56 dBi LTE B17:0.61 dBi, LTE B25:2.21 dBi LTE B26:0.71 dBi, LTE B38:2.77 dBi LTE B41:2.79 dBi, LTE B66:2.06 dBi LTE B71:0.59 dBi Antenna Designation: Rod-shaped antenna Power Rating Input: DC 3.8V~4.2V Page 6 of 8 Report No.: STS2510005H01 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 7 of 8 Report No.: STS2510005H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 F= Frequency in MHz Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Page 8 of 8 Report No.: STS2510005H01 2.3 TEST RESULT Tune up RF Function Frequency (MHz) Separation distance (cm) Max Output Power (dBm) Tune Up Power (dBm) Max Tune Up Power (dBm) ANT Gain (dBi) Max EIRP (dBm) Max EIRP (mW) Power Density (mW/cm²) Limit (mW/cm²)…

Text truncated - open the document above for the full version.

Page 1 of 10 Shanghai Moya Electronic Technology Co.,Ltd Shanghai Moya Electronic Letter of Recognition for the Antennae Customer Name: Antenna band: Antenna Model: MO-LT01 Manufacturer: Shanghai Moya Electronic Technology Co Date of Issue: 2019-11-18 Manufacturer's recognition column. copy (a model) audits license Customer recognition column: recognize audits license Moyotech Shanghai AirM2M Communication Technology Co., Ltd. Ltd Page 2 of 10 Shanghai Moya Electronic Technology Co.,Ltd CONTENTS Project/content pagination cover (of a publication) 1 catalogs 2 I. Description of product specifications 3 II. Exterior view 3 III. Passive test data 4-7 IV. Dimensional inspection report 8 V. Engineering drawings 9 VI. Temperature test report 10 Shanghai Moya Electronic Technology Co. ,Ltd I. Description of product specifications Antenna Name MO-LT01 Main Electrical Specifications Frequency Rang (MHz) 700-960/ 1710-2700MHz Voltage Standing Wave Ratio VSWR 700 ≤ 3.0; 960 ≤ 3.0; 1710 ≤ 3.0; 2700 ≤ 3.0 Impedance (Ω) 50Ω Polarization mode Polarization Vertical Polarization Main Structure Specifications Height Length(mm) 196.8 Connector Type SMA Appearance Color Color ferrous II. Exterior view Page 4 of 10 Shanghai Moya Electronic Technology Co. ,Ltd III. Passive test data 4.1 , Gain Direction Diagram Page 5 of 10 Shanghai Moya Electronic Technology Co. ,Ltd Page 6 of 10 Shanghai Moya Electronic Technology Co. ,Ltd Page 7 of 10 Shanghai Moya Electronic Technology Co. ,Ltd Shanghai Moya Electronic Technology Co. ,Ltd V. Dimensional inspection report MOYA Sample Size Measurement Report (Version A/0) provider MOYA material (that sth is made of) Drawing No. MO-TECT Project name measuremen t environmen t Drawing version A/0 Finished product name Oar Antenna surveyor wrinkle d hair Mold Time Finished Product Code MO-LT01 measuring time 2019.11.16 Molding time Size Information Measurement samples Handling of comments Number Location Siz e Nat ure sizes on the order of magni tude of a funct ion (i.e. decim al or Roman numer al) underp erform 1 2 3 judgm ent Supplie r's commen ts Comments gauge 1 ordin ary 196.8 1.5 1.5 196.8 196.8 196.6 OK eligibl e (voter etc) caliper 2 ordin ary 173 1 1 173 173 173 OK eligibl e (voter etc) caliper 3 ordin ary 37. 1 1 1 37. 1 37.1 37.2 OK eligibl e (voter etc) caliper Page 9 of 10 Shanghai Moya Electronic Technology Co. ,Ltd VI. Engineering drawings Unit:mm Page 10 of 10 Shanghai Moya Electronic Technology Co. ,Ltd VII. Temperature test report High and low temperature test report Client. Product Model:MO-LT01 Purpose of the test Confirm that the product is not abnormally defective Low temperature storage test High temperature storage test ■Temperature shock test Constant humidity and heat test test condition at 35°C for 2 hours. The samples were at temperature of 70°C for 2 hours. 2 hours, for 2 hours within

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2510005W02 Issued for Shanghai AirM2M Communication Technology Co., Ltd. Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module Brand Name: Luat Model Name: Air8000 Series Model(s): LuatOS FCC ID: 2AEGG-AIR8000 Test Standards: FCC Part15.247 Page 2 of 98 Report No.: STS2510005W02 TEST REPORT Applicant’s Name ................. : Shanghai AirM2M Communication Technology Co., Ltd. Address ................................. : Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Manufacturer's Name ........... : Shanghai AirM2M Communication Technology Co., Ltd. Address ................................. : Room 611, 6th Floor, No. 100 Xiuyan Road, Pudong New Area, Shanghai Product Description Product Name ........................ : 4G Module Brand Name ........................... : Luat Model Name .......................... : Air8000 Series Model(s) .................... : LuatOS Standards ............................. : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 09 Oct. 2025 Date (s) of performance of tests ............. : 09 Oct. 2025 ~ 27 Oct. 2025 Date of Issue .......................................... : 27 Oct. 2025 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 98 Report No.: STS2510005W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 30 4.1 LIMIT 30 4.2 TEST PROCEDURE 30 4.3 DEVIATION FROM STANDARD 30 4.4 TEST SETUP 30 4.5 EUT OPERATION CONDITIONS 30 4.6 TEST RESULTS 30 5. POWER SPECTRAL DENSITY TEST 31 5.1 LIMIT 31 5.2 TEST PROCEDURE 31 5.3 DEVIATION FROM STANDARD 31 5.4 TEST SETUP 31 5.5 EUT OPERATION CONDITIONS 31 5.6 TEST RESULTS 31 6. BANDWIDTH TEST 32 6.1 LIMIT 32 6.2 TEST PROCEDURE 32 6.3 DEVIATION FROM STANDARD 32 6.4 TEST SETUP 32 6.5 EUT OPERATION CONDITIONS 32 Page 4 of 98 Report No.: STS2510005W02 Table of Contents Page 6.6 TEST RESULTS 32 7. PEAK OUTPUT POWER TEST 33 7.1 LIMIT 33 7.2 TEST PROCEDURE 33 7.3 DEVIATION FROM STANDARD 33 7.4 TEST SETUP 33 7.5 EUT OPERATION CONDITIONS 33 7.6 TEST RESULTS 33 8. ANTENNA REQUIREMENT 34 8.1 STANDARD REQUIREMENT 34 8.2 EUT ANTENNA 34 APPENDIX 1-TEST DATA 35 DUTY CYCLE 35 MAXIMUM PEAK CONDUCTED OUTPUT POWER 45 -6DB BANDWIDTH 46 MAXIMUM POWER SPECTRAL DENSITY LEVEL 56 BAND EDGE 66 CONDUCTED RF SPURIOUS EMISSION 79 APPENDIX 2-PHOTOS OF TEST SETUP 98 Page 5 of 98 Report No.: STS2510005W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 27 Oct. 2025 STS2510005W02 ALL Initial Issue Page 6 of 98 Report No.: STS2510005W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 98 Report No.: STS2510005W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 98 Report No.: STS2510005W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name 4G Module Brand Name Luat Model Name Air8000 Series Model(s) LuatOS Model Difference Only difference in model name. Product Description The EUT is a 4G Module Operation Frequency: 802.11b…

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2510005W03 Issued for Shanghai AirM2M Communication Technology Co., Ltd. Room 555A, Building 2, No. 787 Manufacturing Bureau Road, Huangpu District, Shanghai, China Product Name: 4G Module Brand Name: Luat Model Name: Air8000 Series Model(s): LuatOS FCC ID: 2AEGG-AIR8000 Test Standards: FCC Part15.247 Page 2 of 68 Report No.: STS2510005W03 TEST REPORT Applicant’s Name ..................…

Text truncated - open the document above for the full version.