2AEJAVOLT5MOBILE PHONE

2.911 (d)(7)USA Agent v1.5 GSM GLOBE.COM INC Section 2.9 11(d)(7) USA Agent for Service of Process Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie, Florida 33324 United States Product Name: MOBILE PHONE FCC ID: 2AEJAVOLT5 Model(s): VOLT 5 2.911(d)(7) USA Designated Agent for Service of Process We, [GSM GLOBE.COM INC] (“the applicant”) designate [GSM GLOBE.COM INC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledgeour consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledgeour acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We acknowledgeourobligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email addressfor no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: GSM GLOBE.COM INC USA Address: 10286 SW 22nd pl. Davie, Florida 33324 United States FRN : 0024494924 Contact Name: Zubair Panjwani Telephone No: 7862476086 Email: [email protected] Applicant Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie, Florida 33324 United States FRN : 0024494924 FCC Grantee Code: 2AEJA Contact Name: Zubair Panjwani Telephone No: 7862476086 Email: [email protected] Signature: Title: Director Date: 2025-08-21 Signature: Title: Director Date: 2025-08-21 GSM GLOBE.COMINC 2.911 (d)(7)USA Agent v1.5 NOTE1: An applicantlocatedin the UnitedStatesmay designateitself as the agent for service of process. Reference;FederalRegisterdocument2022-28263publishedon 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

GSM GLOBE.COM INC 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.9 11(d)(5)(ii) Certification – Applicant (Covered Lis t) Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie, Florida 33324 United States Product Name: MOBILE PHONE FCC ID: 2AEJAVOLT5 Model(s): VOLT 5 2.911(d)(5)(ii) Applicant filing We, [GSM GLOBE.COM INC] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Zubair PanjwaniDate: 2025-08-21 Title and Company name:Director /GSM GLOBE.COM INC NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

GSM GLOBE.COMINC 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section 2.9 11(d)(5)(i) Certification – EquipmentType Company name: GSM GLOBE.COM INC Address: 10286 SW 22nd pl. Davie, Florida 33324 United States Product Name: MOBILE PHONE FCC ID: 2AEJAVOLT5 Model(s): VOLT 5 2.911(d)(5)(i) EquipmentType We, [GSM GLOBE.COM INC] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibitedfrom receivingan equipmentauthorizationpursuantto § 2.903;of the FCC rules.  Identifiedas an equipmenttype in the “CoveredList ” NOTE1 Yourssincerely, Name:ZubairPanjwaniDate:2025-08-21 Title and Companyname:Director/GSMGLOBE.COMINC NOTE1 “CoveredList”; is the List of Equipmentand ServicesCoveredBy Section2 of The SecureNetworksAct, availableat https://www.fcc.gov/supplychain/coveredlist References; 1) 986446D01 CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) FederalRegisterdocument2022-28263publishedon 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

GSM GLOBE.COM INC Date: 2025-08-21 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Long Term Confidentiality FCC ID: 2AEJAVOLT5 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Signature: Name: Zubair Panjwani Title: Director For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual

GSM GLOBE.COM INC 10286 SW 22nd pl. Davie, Florida 33324 United States Agent Authorization Company:GSM GLOBE.COM INC Address: 1 0286 SW 22nd pl. Davie, Florida 33324 United States Product Name: MOBILE PHONE Model Number(s): VOLT 5 Product Description: MOBILE PHONE We authorize MiCOM Labs Inc., 575 Boulder C ourt, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:Date: 2025-08-21 Name:Zubair Panjwani Title:Director Company:GSM GLOBE.COM INC

Label Artwork and Location Model: VOLT 5 Label: Size: L*W= 34.5*31.5mm Location

Page: 1/11 Ref : ACR.9.6.25.BES.B Cancel and replace the report ACR.9.6.25.BES.A BTF TESTING LAB (SHENZHEN) CO., LTD. F101,201 AND 301, BUILDING 1, BLOCK 2, TANTOU INDUSTRIAL PARK, TANTOU COMMUNITY SONGGANG STREET, BAO'AN DISTRICT, SHENZHEN, CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0125-EPGO-445 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 01/02/2025 Accreditations #2-6789 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Docusign Envelope ID: 691C3E09-7794-43A0-BF36-C536093756C8 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.9.6.25.BES.B Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 1/9/2025 Checked & approved by: Pedro Ruiz Technical Manager 1/9/2025 Authorized by: Geraldine Toutain Quality Manager Customer Name Distribution : BTF Testing Lab (Shenzhen) Co., Ltd. Issue Name Date Modifications A Pedro Ruiz 1/9/2025 Initial release B Pedro Ruiz 2/12/2025 Change freq label 850 to 835 Docusign Envelope ID: 691C3E09-7794-43A0-BF36-C536093756C8 2/13/2025 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.9.6.25.BES.B Page: 3/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 5 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 6 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment .................................................................................................... 10 Docusign Envelope ID: 691C3E09-7794-43A0-BF36-C536093756C8 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.9.6.25.BES.B Page: 4/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0125-EPGO-445 Product Condition (new / used) New Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.206 M Dipole 2: R2=0.208 M Dipole 3: R3=0.226 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. Docusign Envelope ID: 691C3E09-7794-43A0-BF36-C536093756C8 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.9.6.25.BES.B Page: 5/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to …

Text truncated - open the document above for the full version.

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName: GSMGLOBE.COMINC Address: 10286SW22ndpl.Davie,Florida,33324 EUTName: MOBILEPHONE BrandName: RAYOMOVIL ModelNumber: VOLT5 IssuedBy CompanyName: BTFTestingLab(Shenzhen)Co.,Ltd. Address: 101/201/301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangSubdistrict,Bao'anDistrict, Shenzhen,China ReportNumber: BTF250813R00101 TestStandards: FCC47CFR§2.1093IEEEStd.1528-2013 IEEEC95.1-2019 FCCID: 2AEJAVOLT5 TestConclusion: Pass TestDate: 2025-08-20to2025-08-21 DateofIssue: 2025-08-22 TestedBy: Kris.Li/Tester Date: 2025-08-22 PreparedBy: AmendaZhong/ProjectEngineer Date: 2025-08-22 ApprovedBy: Ryan.CJ/EMCManager Date: 2025-08-22 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF250813R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02025-08-22Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF250813R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 52 BTFTestingLab(Shenzhen)Co.,Ltd. 101/201/301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangSubdistrict,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5EquipmentunderTestAncillaryEquipment....................................................................................................................5 2.6TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................7 3.3TestResultSummary......................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition....................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................10 5.SystemVerification.................................................................................................................................................................15 5.1PurposeofSystemCheck.............................................................................................................................................15 5.2SystemCheckSetup.....................................................................................................................................................15 6.TESTPOSITIONCONFIGURATIONS.......................................................…

Text truncated - open the document above for the full version.

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID. ............................ : 2AEJAVOLT5 Test Report No. ............... : TCT250807E012 Date of issue ................... : Sep. 03, 2025 Testing laboratory .......... : SHENZHEN TONGCE TESTING LAB Testing location/ address: 2101 & 2201, Zhenchang Factory, Renshan Industrial Zone, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, 518103, People's Republic of China Applicant's name ............ : GSM GLOBE.COM INC Address ........................... : 10286 SW 22nd pl. Davie Florida 33324, United States Manufacturer's name ... : GSM GLOBE.COM INC Address ........................... : 10286 SW 22nd pl. Davie Florida 33324, United States Standard(s) ..................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2020 Product Name ................. : MOBILE PHONE Trade Mark ...................... : RAYO MOVIL Model/Type reference..... : VOLT 5 Rating(s).......................... : Adapter Information: MODEL: VOLT 5 Input: AC 110–240V, 50/60Hz, 0.12A Output: DC 5.0V, 1000mA Rechargeable Li-ion Battery DC 3.7V Date of receipt of test item ......................................... : Aug. 07, 2025 Date (s) of performance of test ................................... : Aug. 07, 2025 ~ Sep. 03, 2025 Tested by (+signature) ... : Aaron MO Check by (+signature) .... : Beryl ZHAO Approved by (+signature): Tomsin General disclaimer: This report shall not be reproduced except in full, without the written approval of SHENZHEN TONGCE TESTING LAB. This document may be altered or revised by SHENZHEN TONGCE TESTING LAB personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT250807E012 Page 2 of 86 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Table of Contents 1. General Product Information .................................................................. 3 1.1. EUT description ..................................................................................................... 3 1.2. Model(s) list ............................................................................................................ 3 1.3. Operation Frequency ............................................................................................ 3 2. Test Result Summary .............................................................................. 4 3. General Information ................................................................................. 5 3.1. Test environment and mode ................................................................................. 5 3.2. Description of Support Units ................................................................................ 5 4. Facilities and Accreditations .................................................................. 6 4.1. Facilities ................................................................................................................. 6 4.2. Location ................................................................................................................. 6 5. Measurement Uncertainty ....................................................................... 6 6. Test Results and Measurement Data ..................................................... 7 6.1. Antenna requirement ............................................................................................ 7 6.2. Conducted Emission ............................................................................................. 8 6.3. Conducted Output Power ................................................................................... 12 6.4. 20dB Occupy Bandwidth .................................................................................... 13 6.5. Carrier Frequencies Separation ......................................................................... 14 6.6. Hopping Channel Number .................................................................................. 15 6.7. Dwell Time ............................................................................................................ 16 6.8. Pseudorandom Frequency Hopping Sequence ................................................ 17 6.9. Conducted Band Edge Measurement ................................................................ 18 6.10.Conducted Spurious Emission Measurement .................................................. 19 6.11.Radiated Spurious Emission Measurement ..................................................... 20 Appendix A: Test Result of Conducted Test Appendix B: Photographs of Test Setup Appendix C: Photographs of EUT Report No.: TCT250807E012 Page 3 of 86 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. General Product Information 1.1. EUT description Product Name ....................... : MOBILE PHONE Model/Type reference........... : VOLT 5 Sample Number....................: TCT250807E012-0101 Bluetooth Version ................ : V2.1 Operation Frequency ........... : 2402MHz~2480MHz Transfer Rate ........................ : 1/2/3 Mbits/s Number of Channel .............. : 79 Modulation Type ................... : GFSK, π/4-DQPSK, 8DPSK Modulation Technology ....... : FHSS Antenna Type ........................ : Internal Antenna Antenna Gain ........................ : 1.59dBi Rating(s)................................ : Adapter Information: MODEL: VOLT 5 Input: AC 110–240V, 50/60Hz, 0.12A Output: DC 5.0V, 1000mA Rechargeable Li-ion Battery DC 3.7V Note: The antenna gain listed in this report is provided by applicant, and the test laboratory is not responsible for this parameter. 1.2. Model(s) list None. 1.3. Operation Frequency Channel Frequency Channel Frequency Channel Frequency Channel Frequency 0 2402MHz 20 2422MHz 40 2442MHz 60 2462MHz 1 2403MHz…

Text truncated - open the document above for the full version.

Page 1 Ve r s i o n：1.0 Issue Date:2025-8-27 Antenna Specifications Name：SHENZHEN TYT COMMUNICATION CO.,LTD. Address:Room 701, Building 212, Taian Industrial Zone, Chegongmiao, Shatou Sub-district, Futian District, Shenzhen City Name:H6 BT Page 2 Ve r s i o n：1.0 Issue Date:2025-8-27