2AEMZT-205Wireless charging power bank

NO/OFF Battery capacity indicator Wireless Charging indicator 41 2 3 Wireless Charging Power Bank USER MANUAL T-205 USB2USB1 Micro USB Wireless Charging area 1.T-205 wireless charging power bank 2.User manual 3.USB cable 4.Flannelette bags This product is a portable wireless charging power bank. Wireless charging support for all mobile with “Qi” standard. Wireless charging and wired charging can work at the same time. Also have 2.1A two USB ports. It can charging for most of smart phonetablet PC and so on.. 1)Fully charge the product the first time you use. 2)If all the LED of the product crash out and power off while charging the digital product, it show low battery of the product and you should charge the product as soon as possible. 3)Placing the wireless charging receiver on the middle of the wireless charging area or being closed to the wireless charging area if possible (the maximum wireless charging distance is 6mm). 4)Charge the outer charger in order to restore the product when the product turns into the protected mode(LED displays nothing when pressing the on-off button) because of the output short trouble. 5)Take the metal tag or other object away from wireless charging area while charging. 6) To avoid short trouble and electric leakage, dismantling privately or pouring into fire or water will be never permited. 7) Take care of your children to stop them from taking wireless charger for a toy in case of any accident. FCC NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. - The deviceshould not be used next to the body - This deviceis designed for desktop usage - This devicehas been tested for compliance with RF exposure limits at 10 cm from user Product description: Specifications: Indications of parts: Use method: Button and LED description: Attention item/Safety notice: Components dimensions 186mm×112mm×11.5mm Operational Temperature -15~55°C Power Input DC 5V/2A Wireless Transfer Power 5W Wireless Efficiency >70% Operational Frequency 110KHz-205KHz Wireless Output DC 5V/1A USB1 Output DC 5V/2.1A USB2 Output DC 5V/2.1A Battery Type Lithium polymer batteries Capacity 9000mAh ItemDescription On/off but ton Turn on by press ing the on/ off but ton once Turn off by holding the on/off butt on 3second The USB ports will recover by pressing the on/ offbut tononce Wireless charging indication Blinking: normal wireless charging or wireless charging by small charging current Blinking rapidly: abnormal charging Batt ery capacity indication(di scharging) LED1 lighting: 0%-25% batt ery capacity LED1 2 lighting: 25%-50% batt ery capacity LED1 2 3 lighting: 50%-75% battery capacity LED1234lighting:75% -100%bat terycapacity Batt ery capacity indication(c harging) LED1 2 3 4blinking in turn: less than 25% LED1 lighting,LED2 3 4 blinking in turn: 25% -50% bat tery capacity LED1 2lighting,LED3 4 blinking in turn: 50% -75% bat tery capacity LED1 2 3lighting,LED4 blinking: less than 100% LED1 2 3 4lighting: bat tery full charging Discharging operation 1)The battery capacity LED will be lighted up simultaneously while the product is started normally. 2)The wireless charging LED will be blinking and start to charg the device while wireless charging receiver is detected in the area of wireless charging. The USB ports also can charge the device simultaneously. 3)The wireless charging device will gain priority to be charged once inputing charging current is detected, meanwhile the USB port will turn off automatically. 4)LED will display the battery capacity in real time while the product is charging the device by wireless or wired function. Charging operation 1)Charging the inner battery of the product by using power adapter(the maximum current is 2A), and the charging current instead of 1A by using the USB port of computer. LED will display the charging capacity while charging(the devitation will be ±10%). 2)All the 4battery capacity LED will be lighted up when the inner battery is fully charged,which shows the end of charging.

==~.......... ~~,.---,==-~-----:-~c---=-==----=--c-------------------~~-~~-~-~----~---- Huizhou SPEED Wireless Technology Co.,Ltd. FCC ID:2AI':I"1ZT-2(1 5 ~OWER OF ATTORNEY Date: April 25, 2015 Federal Communications Commi ssion Authorization and Evaluat i on Division 7435 Oa kland Mills Road Co lumbia , MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) eel" lot-d , (Philo Zhong) on our beh a lf, to appl y to the Federal Communication.; Comrnissi. III on our equipment, Any and all acts carried' out by ,Waltek Services (S henZII'JIJ) r'O " Ltd, (~hilo Zhong) on our behalf shall ha v e the same effect as ac _ of OLl "viII, This authorizat i on exp ire s on April 24, 2016, This is to advise that we are i n full compliance with the Anti-Drud Abuse ACI We, Huizhou SPEED Wireless Technology Co"Ltd,are not subject to el denial o f federal benefits pursuant to Section 5301 of the Anti-Drug Act 0 1988, 21 USC853a, and no party to the application i s subject to a denial ot federal benefits pursuant to that sect ion, Sincerely , Huizhou SPEED Wireless Technology Co"Ltd, )fIA,~1~ ..........................6.~..~..?J... ~....... ....................... Signature Li ~ongbiao /Manager ..........:.......................................... ,., ............ ..... . Typed name and Title

Huizhou SPEED Wireless Technology Co.,Ltd. Date: April 25,2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID : 2AEMZT-205. Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics SCH.pdf Block Diagram BlockDiagram.pdf Operational Description CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation wiil not be made before the date of the Grant for this application. Sincerely, Huizhou SPEED Wireless Technology Co.,Ltd. ) ,,(;fA ~\ ......".~3.~.l/...t.~... .......... .. ... .. ..... .... .. . . .. . , ....... . . . Signature Li Y ongbiao IManager Typed name and Title

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Photographs - Constructional Details T-205_Appearance View Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Huizhou SPEED Wireless Technology Co.,Ltd. FCC Label Sample for model: T-205 Model:T-205 FCC ID: 2AEMZT-205 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Huizhou SPEED Wireless Technology Co.,Ltd. FCC Label Sample for model: T-205 Model:T-205 FCC ID: 2AEMZT-205 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

T-205 ANT

TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No. .................... : WTS15S0424822-1E FCC ID ................................ : 2AEMZT-205 Applicant ............................ : Huizhou SPEED Wireless Technology Co.,Ltd. Address .............................. : SX-01-02 Shangxia Section, Hi-tech District of East-river, Huizhou, Guangdong, China Manufacturer .................... : Huizhou SPEED Wireless Technology Co.,Ltd. Address .............................. : SX-01-02 Shangxia Section, Hi-tech District of East-river, Huizhou, Guangdong, China Product Name .................... : Wireless charging power bank Model No. ........................... : T-205 Standards ........................... : FCC PART18: 2014 Date of Receipt sample .... : Apr. 08, 2015 Date of Test ........................ : Apr. 08 - 17, 2015 Date of Issue ...................... : May 12, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company.The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTS15S0424822-1E Page 2 of 20 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test RequirementTest Method Result Conducted Emissions (150kHz to 30MHz) 18.307(c) FCC Measurement Procedure MP-5 Pass Radiated Emissions (9kHz to 30MHz) 18.305(c) FCC Measurement Procedure MP-5 Pass Reference No.: WTS15S0424822-1E Page 3 of 20 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................................... 2 3 CONTENTS .............................................................................................................................................................. 3 4 GENERAL INFORMATION ................................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 4 4.2 DETAILS OF E.U.T. ........................................................................................................................................... 4 4.3 TEST FACILITY ................................................................................................................................................... 4 5 EQUIPMENT USED DURING TEST .................................................................................................................... 5 5.1 EQUIPMENTS LIST ............................................................................................................................................. 5 5.2 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 5 5.3 MEASUREMENT UNCERTAINTY ......................................................................................................................... 5 5.4 TEST EQUIPMENT CALIBRATION ....................................................................................................................... 5 6 CONDUCTED EMISSION TEST ........................................................................................................................... 6 6.1 E.U.T. TEST CONDITION ................................................................................................................................... 6 6.2 EUT SETUP ....................................................................................................................................................... 7 6.3 CONDUCTED EMISSION TEST RESULT ............................................................................................................. 7 7 RADIATION EMISSION TEST ............................................................................................................................ 10 7.1 EUT OPERATION: ........................................................................................................................................... 10 7.2 TEST SETUP .................................................................................................................................................... 11 7.3 SPECTRUM ANALYZER SETUP ........................................................................................................................ 11 7.4 TEST PROCEDURE .......................................................................................................................................... 12 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ....................................................................................... 12 7.6 SUMMARY OF TEST RESULTS ......................................................................................................................... 12 8 PHOTOGRAPHS OF TESTING .......................................................................................................................... 14 8.1 CONDUCTED EMISSIONS TEST VIEW .............................................................................................................. 14 8.2 RADIATED EMISSION TEST VIEW .........................................................…

Text truncated - open the document above for the full version.

TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 17 Reference No. .................... : WTS15S0424822-2E FCC ID ................................ : 2AEMZT-205 Applicant ............................ : Huizhou SPEED Wireless Technology Co.,Ltd. Address .............................. : SX-01-02 Shangxia Section, Hi-tech District of East-river, Huizhou, Guangdong, China Manufacturer .................... : Huizhou SPEED Wireless Technology Co.,Ltd. Address .............................. : SX-01-02 Shangxia Section, Hi-tech District of East-river, Huizhou, Guangdong, China Product Name .................... : Wireless charging power bank Model No. ........................... : T-205 Standards........................... : FCC CFR47 Part 1.1310 KDB 680106 D01 v02 Date of Receipt sample .... : Apr. 08, 2015 Date of Test ....................... : May. 05 - 17, 2015 Date of Issue ...................... : May 17, 2015 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTS15S0424822-2E Page 2 of 17 Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 2 Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1310PASS Reference No.: WTS15S0424822-2E Page 3 of 17 Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 3 Contents Page 1 COVER PAGE ...................................................................................................................................... 1 2 TEST SUMMARY ............................................................................................................................................. 2 3 CONTENTS ....................................................................................................................................................... 3 4 GENERAL INFORMATION ............................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. .......................................................................................................... 4 4.2 DETAILS OF E.U.T. .................................................................................................................................... 4 4.3 TEST FACILITY ............................................................................................................................................ 4 5 EQUIPMENT USED DURING TEST ............................................................................................................. 5 5.1 EQUIPMENTS LIST ...................................................................................................................................... 5 5.2 SUPPORTING EQUIPMENT LIST .................................................................................................................. 5 5.3 MEASUREMENT UNCERTAINTY .................................................................................................................. 5 5.4 TEST EQUIPMENT CALIBRATION ................................................................................................................ 5 6 RF EXPOSURE ................................................................................................................................................. 6 6.1 TEST SETUP ............................................................................................................................................... 6 6.2 THE PROCEDURES / LIMIT ........................................................................................................................... 7 6.3 TEST DATA ................................................................................................................................................. 8 7 PHOTOGRAPHS –T-205 TEST SETUP ....................................................................................................... 9 8 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS ................................................................................. 12 8.1 T-205 EXTERNAL VIEW ............................................................................................................................ 12 8.2 T-205 INTERNAL VIEW ............................................................................................................................. 15 Reference No.: WTS15S0424822-2E Page 4 of 17 Waltek Services (Shenzhen) Co.,Ltd. http://www.wa ltek.com.cn 4 General Information 4.1 General Description of E.U.T. Product Name :Wireless charging power bank Model No. :T-205 Model Description : N/A Transmitting Frequency : 110-205KHz 4.2 Details of E.U.T. Technical Data ...................... : Battery DC 3.7V 4500mAh *2 USB Input: DC 5V/2A USB1 Output: DC 5V/2.1A USB2 Output: DC 5V/2.1A Wireless Output: DC 5V/1A 4.3 Test Facility The test facility has a test site registered with the following organizations: IC – Registration No.: 7760A-1 Waltek Services(Shenzhen) Co., Ltd. has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Regi stration 7760A-1, July 12, 2012. FCC Test Site 1#– Registration No.: 880581 Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory `has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The ac…

Text truncated - open the document above for the full version.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn T-205 Photographs of Testing Conducted Emissions Test View Radiated Emission Test View