2AEOU-MD300Handheld Metal Detector

MD-3003B1Handheld Metal Detector MD-3003B1 / HANDHELD METAL DETECTOR                                       :+2͹           ,'>͹ +SGOR͹GXYKTGR&2O\KIUSNZZV ]]]GXYKTGRJKZKIZUXTKZ 'JJXKYY ,]KYZ'([ORJOTM)N[GTM>OT9NO0OK@NUTM:GO/TLUXSGZOUT:KINTURUM_/TJ[YZXOGR6GXQ9NO2UTM  )USS[TOZ_*K@NKTM8UGJ4U9NO?GT9ZXKKZ(GUȑGT*OYZXOIZ9NKT@NKT  -[GTM*UTM)NOTG    ;9' '9+44'.19+);8/:+ :+).4525-? MD-3003B1Handheld Metal Detector Functions and Features
High sensitivity
Detects a pin within 30 to 60mm
Conveniently and simply to operate
Easily to adjust When battery voltage drop from 9 to 7V, detecting distance remain unchanged Energy smart: can work 40 hours continuously Except the light alarm, audible alarm and the vibratory alarm can be chosen When the battery nearly dies, audible alarm or vibratory alarm should be a warning Turn on (off) the detector, it will give you an audible alarm or a vibratory alarm There are also two sensitivities, high and low, to select Rechargeable:charge it about 4-6 hours after the battery die Self-checking: it self-checks when it starts Using ABS, durable                                       :+2͹           ,'>͹ +SGOR͹GXYKTGR&2O\KIUSNZZV ]]]GXYKTGRJKZKIZUXTKZ 'JJXKYY ,]KYZ'([ORJOTM)N[GTM>OT9NO0OK@NUTM:GO/TLUXSGZOUT:KINTURUM_/TJ[YZXOGR6GXQ9NO2UTM  )USS[TOZ_*K@NKTM8UGJ4U9NO?GT9ZXKKZ(GUȑGT*OYZXOIZ9NKT@NKT  -[GTM*UTM)NOTG    ;9' '9+44'.19+);8/:+ :+).4525-? MD-3003B1Handheld Metal Detector Accessory: Charger (Optional Accessory) Technical StandardTechnical Parameter Optional Accessories                                       :+2͹           ,'>͹ +SGOR͹GXYKTGR&2O\KIUSNZZV ]]]GXYKTGRJKZKIZUXTKZ 'JJXKYY ,]KYZ'([ORJOTM)N[GTM>OT9NO0OK@NUTM:GO/TLUXSGZOUT:KINTURUM_/TJ[YZXOGR6GXQ9NO2UTM  )USS[TOZ_*K@NKTM8UGJ4U9NO?GT9ZXKKZ(GUȑGT*OYZXOIZ9NKT@NKT  -[GTM*UTM)NOTG    ;9' '9+44'.19+);8/:+ :+).4525-? MD-3003B1Handheld Metal Detector Product size415mm x 85mm x 45mm Package Size420mm x100mm x 50mm Working frequencyAbout 25 KHz Alarmssound (or vibration) and light Power supply Standard 6F22/15F8H 9V battery or rechargeable battery˄optional˅ Temperature-15䉝㻌㼠㼛㻌㻗㻡㻡䉝 Packing25/box 13.3kg/box Applications Security check: avoid carrying contraband, such as knives, guns and more Factory: avoid valuables losing Education: avoid cheating, prevent from carrying cheating tools, such as phones, electronic Dictionary and more when examine Ultimate sensitivity: 38 pistol: 20cm Little knife: 15cm Blade: 10cm Coin: 8cm FCC Statement                                       :+2͹           ,'>͹ +SGOR͹GXYKTGR&2O\KIUSNZZV ]]]GXYKTGRJKZKIZUXTKZ 'JJXKYY ,]KYZ'([ORJOTM)N[GTM>OT9NO0OK@NUTM:GO/TLUXSGZOUT:KINTURUM_/TJ[YZXOGR6GXQ9NO2UTM  )USS[TOZ_*K@NKTM8UGJ4U9NO?GT9ZXKKZ(GUȑGT*OYZXOIZ9NKT@NKT  -[GTM*UTM)NOTG    ;9' '9+44'.19+);8/:+ :+).4525-? 33 KHz MD-3003B1Handheld Metal Detector This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must acc…

Text truncated - open the document above for the full version.

Differences Declaration To whom concern, We company Shenzhen Zhonganxie Technology Co., Ltd. hereby declares: The product model(s) MD-3003B1, GP-3003B1, TX-1001B, GC-1001, ARSENAL-100180, ARSENAL-1165180, ZHONGANXIE-83448859, ZHONGANXIE-83448689, ZHONGANXIE-25332807, ZHONGANXIE-82879177, ZHONGANXIE-82876007, MD-5006, MD-3010II are identical in the same PCB layout, interior structure and electrical circuits with the model MD-300 which tested in Global United Technology Services Co., Ltd., the only differences are the model name for commercial purpose. Position: Sales Manager Date: 2015-5-06

Label location

Handheld Metal Detector FCC ID: 2AEOU-MD300 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Ant gain 0dBi ;so Ant numeric gain=1 Field strength = 95.36 dBuV/m @3m So Pt={ [10 ( 95.36 /20) /10 6 x3] 2 /30 }x1000 mW = 1.031 mW So ( 1.031 mW/5mm)x √0.000033 GHz = 0.001 < 3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTSE15040055701 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS or testing done by GTS in connection with, distribution or use of the product described in this report must be approved by GTS in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC REPORT Applicant: Shenzhen Zhonganxie Technology Co., Ltd. Address of Applicant: A3 Building, Zhongtai, Shilong, Dezheng No.2 Road, Baoan, Shenzhen, China Equipment Under Test (EUT) Product Name: Handheld Metal Detector Model No.: MD-300, MD-3003B1, GP-3003B1, TX-1001B, GC-1001, ARSENAL-100180, ARSENAL-1165180, ZHONGANXIE-83448859, ZHONGANXIE-83448689, ZHONGANXIE-25332807, ZHONGANXIE-82879177, ZHONGANXIE-82876007, MD-5006, MD-3010II FCC ID: 2AEOU-MD300 Applicable standards: FCC CFR Title 47 Part 15 Subpart C:2014 Date of sample receipt: April 27, 2015 Date of Test: April 27-30, 2015 Date of report issued: May 04, 2015 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE15040055701 Global United Technology Services Co., Ltd. Project No.: GTSE150400557RF Room 301-309, 3th Floor, Block A, Huafeng Jinyuan Business Building, No. 300 Laodong Industrial Zone,Xixiang Road, Baoan District, Shenzhen 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 23 2 Version Version No. Date Description 00 May 04, 2015 Original Prepared by: Date: May 04, 2015 Project Engineer Reviewed by: Date: May 04, 2015 Reviewer Report No.: GTSE15040055701 Global United Technology Services Co., Ltd. Project No.: GTSE150400557RF Room 301-309, 3th Floor, Block A, Huafeng Jinyuan Business Building, No. 300 Laodong Industrial Zone,Xixiang Road, Baoan District, Shenzhen 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 23 3 Contents 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3CONTENTS .............................................................................................................................................. 3 4TEST SUMMARY ..................................................................................................................................... 4 5GENERAL INFORMATION ...................................................................................................................... 5 5.1CLIENTINFORMATION.......................................................................................................................... 5 5.2GENERALDESCRIPTION OF EUT ......................................................................................................... 5 5.3TEST MODE AND TEST VOLTAGE .......................................................................................................... 5 5.4DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 5 5.5DEVIATION FROM STANDARDS ............................................................................................................. 5 5.6ABNORMALITIES FROM STANDARDCONDITIONS .................................................................................... 5 5.7TESTFACILITY .................................................................................................................................... 6 5.8TESTLOCATION .................................................................................................................................. 6 6TEST INSTRUMENTS LIST ..................................................................................................................... 7 7TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 8 7.1ANTENNA REQUIREMENT ..................................................................................................................... 8 7.2CONDUCTEDEMISSIONS ..................................................................................................................... 9 7.3RADIATEDEMISSION ......................................................................................................................... 12 7.420DBOCCUPY BANDWIDTH............................................................................................................... 15 8TEST SETUP PHOTO ............................................................................................................................ 16 9EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 18 Report No.: GTSE15040055701 Global United Technology Services Co., Ltd. Project No.: GTSE150400557…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission