2AEQHL7TAM1.9GHz Digital Modulation Cordless Phone with Digital Answering Machine

cordless telephone with answering machine Model: 20407982, 20407984 IMPORTANT SAFETY INSTRUCTIONS Before using your telephone equipment, basic safety instructions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4. The telephone is for indoor use in dry locations. 5. The maximum ambient operating temperature is 40 °C. In order to avoid overheating, do not cover the telephone. 6. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 7. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 8. Do not use the telephone to report a gas leak in the vicinity of the leak. WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible. WHEN PROGRAMMING EMERGENCY NUMBERS AND (OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the productʼs enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove the cover (or back), no user serviceable parts inside. Refer servicing and fuse replacement to qualified personnel only. Never replace fuses/ sold-in fuses yourself. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 9. Place this product securely on a stable surface. Serious damage and/or injury may result if the unit falls. 10. Slots or openings in the cabinet and the back and bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a place where proper ventilation is not provided. 11. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of AC line power to your home, consult your dealer or local power company. 12. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord. 13. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 14. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in the risk of fire or electric shock. Never spill liquid of any kind on this product. 15. To reduce the risk of electric shock or burns, do not disassemble this product. Take it to a qualified service center when service is required. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. Disconnect TNV circuit connector before removing cover. 16. Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power cord is damaged or frayed. b) If liquid has been spilled into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and may require extensive work by a qualified technician to restore the product to normal operation. e) If the product has been dropped or physically has been damaged. f) If the product exhibits a distinct change in performance. 17. Avoid using a telephone (other than a cordless type) during a thunderstorm. There may be a remote risk of electrical shock from lightning. Therefore we suggest a surge arrestor. SAVE THESE INSTRUCTIONS Welcome to Swissvoice The L7 TAM is a cordless telephone designed for connection to an analog telephone network. International DECT (GAP)-standard digital technology offers excellent voice quality. You can register up to 5 handsets to your base and make internal calls free of charge. The ENERGY STAR ® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR ® label indicating it meets the latest energy efficiency guidelines. Warning Be sure to read this user guide and the safety precautions before using your telephone. Explain their content and the potential hazards associated with using the telephone to your children. Use only the charging cradle supplied with the power adaptor/power cord. Use only recommended, rechargeable batteries. Failure to do so could damage your health and cause injury. Do not charge the handset in charging unit or base station while the headset is connected. Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment (such as a doctorʼs office). Do not hold the rear of the handset to your ear when it is ringing or when the handsfree f…

Text truncated - open the document above for the full version.

18 May 2015 To whom it may concern, Label Location Justification FCC ID: 2AEQHL7TAM Request is hereby submitted by Swissvoice SA to request an alternative method of positively identifying the equipment, pursuant to 47 CFR § 2.925(f) of the FCC Rules. The FCC identifier for handset will be placed in the battery compartment and the following requirements are confirmed to meet: a) The FCC identifier will visible at the time of purchase, by either of the following approaches:  Marketing the device without the battery installed, or  Providing instruction (stated on the box, user manual, or additional documentation) directing the user as to where to find the FCC label. b) The user accessible area will not require any special tools for access and the FCC label will not be placed on a removable part. The user manual has already included the FCC statements, pursuant to 47 CFR § 15.19(a)(3), 15.21 and 15.105(b). If you have questions or need further information, please contact the undersigned.

INTERTEK TESTING SERVICES External Photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM INTERTEK TESTING SERVICES External Photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM

Charging Bay H = 8 w = 29.2 H = 15.2 w = 29 H = 30.6 w = 39.6 H = 14.8 w = 24.8 A3 1 1 05.Jan 2015 Ken Ho 20407051 H = 39 w = 29 Version label with Serial number barcode in Code 128B and EAN 13 Base Handset H = 30.6 w = 39.6 Note: The printable barcode will be provided from factory. 8 18835 00030 6 Model: 20407051 L7 TAM code red US/CA A0 Note: The printable barcode will be provided from factory. Serial number barcode in Code 128B and EAN 13 L7 TAM code red US/CA Labels 3-6) Can match with the L7 version definition xx.xls file, Product Name = L7 TAM code red FR for example 12) The CB labe SV no. & sn should be as same as the HS label. To reduce risk of fire. Use only the supplied Li-ion batteries (charge at least 14 hours before use) Do not use Alkaline or Non Rechargeable batteries Note: This label should be used in 4 radian angles. L7 HS red US/CA Note: The printable barcode will be provided from factory. Adapter 6.0VDC/400mA L7 CB red US/CA Model: 20407982 sn: YNxxxxxx 13.May 2015 Ken Ho Model: 20407982 FCC ID: 2AEQHL7TAM IC: 20181-L7TAM sn: YNxxxxxx Made In China Made In China Model: 20407051 sn Y7xxxxxx Cordless Telephone with answering machine L7 TAM code red US/CA 5001264 US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 Part 15 of the FCC Rules / HAC This device is intended for the analog telephone line Made In China sn: YNxxxxxx Model: 20407984 L7 TAM BS red US/CA Made In China US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. Use only/Usar solo DC adapter 6.0VDC / 400 mA S003IU0600040 5001264 Label size (mm) Charging Bay H = 8 w = 29.2 H = 15.2 w = 29 H = 30.6 w = 39.6 H = 14.8 w = 24.8 A3 1 1 05.Jan 2015 Ken Ho 20407052 H = 39 w = 29 Version label with Serial number barcode in Code 128B and EAN 13 Base Handset H = 30.6 w = 39.6 Note: The printable barcode will be provided from factory. 8 18835 00031 3 Model: 20407052 L7 TAM code white US/CA A0 Note: The printable barcode will be provided from factory. Serial number barcode in Code 128B and EAN 13 L7 TAM code white US/CA Labels 3-6) Can match with the L7 version definition xx.xls file, Product Name = L7 TAM code red FR for example 12) The CB labe SV no. & sn should be as same as the HS label. To reduce risk of fire. Use only the supplied Li-ion batteries (charge at least 14 hours before use) Do not use Alkaline or Non Rechargeable batteries Note: This label should be used in 4 radian angles. Note: The printable barcode will be provided from factory. Adapter 6.0VDC/400mA L7 CB white US/CA Model: 20407976 sn: YNxxxxxx 13.May 2015 Ken Ho Made In China Model: 20407052 sn Y7xxxxxx Cordless Telephone with answering machine L7 TAM code white US/CA 5001264 US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 Part 15 of the FCC Rules / HAC This device is intended for the analog telephone line Made In China L7 HS white US/CA Model: 20407976 FCC ID: 2AEQHL7TAM IC: 20181-L7TAM sn: YNxxxxxx Made In China sn: YNxxxxxx Model: 20407978 L7 TAM BS white US/CA Made In China US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. Use only/Usar solo DC adapter 6.0VDC / 400 mA S003IU0600040 5001264 Label size (mm) Charging Bay H = 8 w = 29.2 H = 15.2 w = 29 H = 30.6 w = 39.6 H = 14.8 w = 24.8 A3 1 1 05.Jan 2015 Ken Ho 20407053 H = 39 w = 29 Version label with Serial number barcode in Code 128B and EAN 13 Base Handset H = 30.6 w = 39.6 Note: The printable barcode will be provided from factory. 8 18835 00032 0 Model: 20407053 L7 TAM code black US/CA A0 Note: The printable barcode will be provided from factory. Serial number barcode in Code 128B and EAN 13 L7 TAM code black US/CA Labels 3-6) Can match with the L7 version definition xx.xls file, Product Name = L7 TAM code red FR for example 12) The CB labe SV no. & sn should be as same as the HS label. To reduce risk of fire. Use only the supplied Li-ion batteries (charge at least 14 hours before use) Do not use Alkaline or Non Rechargeable batteries Note: This label should be used in 4 radian angles. Note: The printable barcode will be provided from factory. Adapter 6.0VDC/400mA L7 CB black US/CA Model: 20407979 sn: YNxxxxxx 13.May 2015 Ken Ho Made In China Model: 20407053 sn Y7xxxxxx Cordless Telephone with answering machine L7 TAM code black US/CA 5001264 US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 Part 15 of the FCC Rules / HAC This device is intended for the analog telephone line Made In China L7 HS black US/CA Model: 20407979 FCC ID: 2AEQHL7TAM IC: 20181-L7TAM sn: YNxxxxxx Made In China sn: YNxxxxxx Model: 20407981 L7 TAM BS black US/CA Made In China US: 22CW400BL7TAM FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC REN 0.0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. Use only/Usar solo DC adapter 6.0VDC / 400 mA S003IU0600040 5001264 Label size (mm) Charging Bay H = 8 w = 29.2 H = 15.2 w = 29 H = 30.6 w = 39.6 H = 14.8 w = 24.8 A3 1 1 05.Jan 2015 Ken Ho 20408028 H = 39 w = 29 Version label with Serial number barcode in Code 128B and EAN 13 Base Handset H = 30.6 w = 39.6 Not…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Handset INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Base Unit INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM INTERTEK TESTING SERVICES Internal photos FCC ID: 2AEQHL7TAM IC: 20181-L7TAM

Report No.: 15030302HKG-001 Page 1 of 69 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Specific Absorption Rate (SAR) Evaluation Report For DECT 6.0 Cordless Phone Handset Unit Model Number: 20407982 Additional Model: 20407976, 20407979, 20408034, 20408035 Brand Name: Swissvoice FCC ID: 2AEQHL7TAM Test Report: 15030302HKG-001 Date of Report: 10 June, 2015 Prepared for Swissvoice SA chemin des Mûriers 1, CH-117 0 Aubonne Switzerland Prepared and Checked by: Approved by: Chan Chun Foo, Bike Senior Lead Engineer Date: 10 June, 2015 Nip Ming Fung, Melvin Assistant Manager Date: 10 June, 2015 Report No.: 15030302HKG-001 Page 2 of 69 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1 Test Result Summary.................................................................................................. 3 2 General Information..................................................................................................... 4 3 Measurement System Description and Procedure ...................................................... 6 4 Tissue Verificaiton .....................................................................................................14 5 SAR Measurement System Verification.................................................................... 15 6 SAR Evaluation......................................................................................................... 17 7 Test Insturments........................................................................................................ 22 8 Measurement Uncertainty ......................................................................................... 23 9 E-Field Probe and Dipole Antenna Calibration .......................................................... 23 10 References ............................................................................................................... 23 APPENDIX A – System Verification Data...................................................................... 24 APPENDIX B – SAR Evaluation Data ........................................................................... 25 APPENDIX C – E-Field Probe and Dipole Antenna Calibration .................................... 29 APPENDIX D – SAR Tissue Specification.................................................................... 68 APPENDIX E – SAR System Validation........................................................................ 69 Report No.: 15030302HKG-001 Page 3 of 69 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1. Test Result Summary *Note: Applicant : Swissvoice SA Applicant Address : chemin des Mûriers 1 CH-117 0 Aubonne Switzerland Model : 20407982 Additional Model : 20407976, 20407979, 20408034, 20408035 Brand Name : Swissvoice EUT Description : DECT 6.0 Cordless Phone Handset Unit Exposure Category : General Population/Uncontrolled Exposure Test Device : Production Unit Date of Sample Received : 10 March, 2015 Date of Test : 09 April, 2015 Date of Report : 10 June, 2015 Place of Testing : Intertek Testing Services Hong Kong Workshop No. 3, G/F, World-wide Industrial Centre, 43-47 Shan Mei Street, Fotan Shatin, N.T., Hong Kong Temperature: +20 to 25°C Environmental Conidtions : Humidity 30 to 70% Test Specification : ANSI/IEEE C95.1: 1992 IEEE Std 1528: 2003 IEEE Std 1528a: 2005 FCC KDB Publication 447498 D01 v05r02 FCC KDB Publication 865664 D01 v01r03 FCC KDB Publication 865664 D02 v01r01 FCC KDB Publication 648474 D04 v01r02 1. Models: 20407 976, 20407979, 20408034 and 20408035 are the same as the Model: 20407982 in Electrical designs, including software & firmware, PCB layout, Construction design/Physical/Enclosure. The difference in model number and number of base serves as marketing purpose only. The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Highest Reported SAR Band Operating Mode TX Frequency (MHz) 1 g Head 1g Body-Worn 1.9GHz DECT Voice 1921.536 – 1928.448 0.025 W/kg N/A This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Report No.: 15030302HKG-001 Page 4 of 69 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 2. General Information 2.1. Description of Equipment under test (EUT) *Note: EUT Description :DECT 6.0 Cordless Phone Handset Unit Model :…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES FCC ID: 2AEQHL7TAM Page of 2 1 Left Cheek Left Tilt INTERTEK TESTING SERVICES FCC ID: 2AEQHL7TAM Page of 2 2 Right Cheek Right T ilt

INTERTEK TESTING SERVICES FCC ID: 2AEQHL7TAM Page 1 of 2 EUT Photo Figure 1 – Handset Unit front view Figure 2 – Handset Unit back view INTERTEK TESTING SERVICES FCC ID: 2AEQHL7TAM Page 2 of 2 Fi gure 3 – 3.7V 550mAh Li-ion Swissvoice rechargeable battery front view Figure 4 – 3.7V 550mAh Li-ion Swissvoice rechargeable battery back view

- Intertek’s standard Terms and Conditions can be obtained at our website: http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: 15030300HKG-001 Application For Original Grant of 47 CFR Part 15 Certification New Family of RSS-213 Issue 3 Equipment Certification Unlicensed Personal Communication Service Devices/ 2 GHz License-exempt Personal Communications Service Devices FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Prepared and Checked by: Approved by: Signed on File Leung Chiu Kuen, Stanley Nip Ming Fung, Melvin Engineer Assistant Manager May 28, 2015 INTERTEK TESTING SERVICES Test Report Number: 15030300HKG-001 Page 1 of 73 FCC ID: 2AEQHL7TAM IC: 20181-L7TAM GENERAL INFORMATION Applicant Name: Swissvoice SA Applicant Address: chemin des Mûriers 1 CH-117 0 Aubonne Switzerland FCC Specification Standard: FCC Part 15, October 1, 2013 Edition FCC ID: 2AEQHL7TAM IC: 20181-L7TAM IC Specification Standard: RSS-213 Issue 3, March 2015 RSS-Gen Issue 3, December 2010 Model(s): 1. 20407984 20407978, 20407981, 20408032, 20408033 2. 20407982 20407976, 20407979,20408034, 20408035 Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1. 1.9GHz Digital Modulation Cordless Phone with Digital Answering Machine- Base Unit 2. 1.9GHz Digital Modulation Cordless Phone with Digital Answering Machine- Handset Serial Number: N/A Sample Receipt Date: March 10, 2015 Date of Test: March 19, 2015 Report Date: May 28, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: 15030300HKG-001 Page 2 of 73 FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Table of Contents 1.0 Test Results Summary & Statement of Compliance.............................................. 5 1.1 Summary of Test Results ....................................................................................... 5 1.2 Statement of Compliance ....................................................................................... 7 2.0 General Description................................................................................................. 9 2.1 Product Description ................................................................................................. 9 2.2 Technical Description .............................................................................................. 9 2.3 Test Methodology.................................................................................................. 10 2.4 Test Facility........................................................................................................... 10 3.0 System Test Configuration.................................................................................... 12 3.1 Justification ........................................................................................................... 12 3.2 Conducted Emission Test Configuration ................................................................ 13 3.3 Conducted Monitoring and Operational Test Configuration .................................... 13 3.4 EUT Exercising Software....................................................................................... 13 3.5 Details of EUT and Description of Accessories...................................................... 14 3.6 Measurement Uncertainty ..................................................................................... 14 4.0 Measurement Results............................................................................................ 16 4.1 Antenna Requirement........................................................................................... 16 4.2 Digital Modulation Techniques............................................................................... 16 4.3 Emission Bandwidth.............................................................................................. 17 4.4 Directional Gain of the Antenna ............................................................................. 21 4.5 Peak Transmit Power ............................................................................................ 22 4.6 Power Spectral Density ......................................................................................... 26 4.7 Automatic Discontinuation of Transmission............................................................ 30 4.8 Unwanted Emission Inside the Sub-Band .............................................................. 31 4.9 Emissions Outside the Sub-Band .......................................................................... 37 4.9.1 Radiated Emissions Configuration Photographs ................................................. 38 4.9.2 Radiated Emissions Data ................................................................................... 38…

Text truncated - open the document above for the full version.

Jun 10, 2015 To whom it may concern, Declarations FCC ID: 2AEQHL7TAM IC: 20181-L7TAM I, the undersigned, hereby declare that 1. The device does not use the provisions of 47CFR 15.323 (c) (6), random waiting mechanism is not used in this system. 2. The provisions of 47CFR 15.323 (c) (10) and 47CFR 15.323 (c) (11) are not used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. 3. Only the handset will act as the initiating device, which will initiate the establishment of the duplex connection. 4. The device complies with the provisions of 47CFR 15.319(f). The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude transmission of control and signaling information or use of repetitive codes used by certain digital technologies to complete frame or burst intervals. The following table explains the reaction of device in case of either absence of information to transmit or operational failure after a connection of its companion device is established. Circumstances Reaction of Base unit Reaction of Handset 1 Switch-off companion device NA NA 2 On hook by companion device B NA 3 Remove power from companion device B A 4 Switch-off device NA NA 5 On hook device NA C 6 Remove power from device A C A – Connection is terminated and, transmission ceases. B – Connection is terminated but device transmits control or signaling information. C – Connection is terminated but companion device transmits control or signaling information. NA – Not applicable represents the device does not contain a hook switch or a power off switch. 5. M L of base unit and Handset declared by manufacturer are 30dBm. If you have questions or need further information, please contact the undersigned. Regards, Jean-Philippe Vermeulin Marketing Manager

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Radiated Emission – Base Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: 2AEQHL7TAM IC: 20181-L7TAM Radiated Emission – Handset Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: 2AEQHL7TAM IC: 20181-L7TAM AC Conducted Emission - Base Unit Front View Side View 1 INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: 2AEQHL7TAM IC: 20181-L7TAM AC Conducted Emission - Base Unit Side View 2