2AEUP-5CNXA9Security Camera

Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250, USA Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 7/29/2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AEUP-5CNXA9 [Ring LLC] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Ring LLC](“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Jason Mitura CC STC 00369140 2026 TR Docusign Envelope ID: A0F2391C-FC31-82B4-8142-B2A93B90D0A3 Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250, USA Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 7/29/2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AEUP-5CNXA9 [Ring LLC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Jason Mitura CC STC 00369140 2026 TR Docusign Envelope ID: A0F2391C-FC31-82B4-8142-B2A93B90D0A3

Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250, USA Rev 1/26/2023 U.S. Agent for Service of Process Attestation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/07/17 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AEUP-5CNXA9 [Ring LLC](“the applicant”) certifies that, as of the date of the filing of the application, [Ring LLC] is the designated U.S. agent for service of process for the above referenced FCC ID. [Ring LLC] agree to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Ring LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Ring LLC Address: 12515 Cerise Ave Hawthorne California 90250 United States Contact Person: Jason Mitura Tel.: 8006561918 Email: [email protected] FRN: 0024616419 Sincerely, For Ring LLC (as Applicant and Designated U.S. Agent) Printed Name: Jason Mitura Title: Authorised Signatory CC STC 00369140 2026 TR Docusign Envelope ID: A0F2391C-FC31-82B4-8142-B2A93B90D0A3

Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250, USA MS-0044715 Page 1 of 1 Revision 1 Date: 2026/7/29 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2AEUP-5CNXA9 Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Permanent Permanent Test Setup*** Permanent Permanent User’s Manual*** Short Term Permanent Part List Ring LLC, has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: Jason Mitura / Authorised Signatory (Signature) (Print name/Title) Tel: 8006561918 Email: [email protected] CC STC 00369140 2026 TR Docusign Envelope ID: A0F2391C-FC31-82B4-8142-B2A93B90D0A3

Ring LLC 12515 Cerise Ave, Hawthorne, CA 90250, USA Authority to Act as Agent Date: 2026/7/29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: I appoint TUV Taiwan / Jason Chang to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Ring LLC / 12515 Cerise Ave Hawthorne California 90250 United States. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2026/7/29 Agreement is valid for 12 months from the above date. By: Jason Mitura (Signature) (Print name) Authorised Signatory 8006561918 (Title) (Telephone) Ring LLC (Company Name) CC STC 00369140 2026 TR Docusign Envelope ID: A0F2391C-FC31-82B4-8142-B2A93B90D0A3

SCAN DURING SETUP SCAN DURING SETUP SCAN DURING SETUP 尺寸: 直径60.7mm （注： 表面必须为可二次打印材质） 色相正确、印迹牢固、 套印准确、各色套印 不露杂色，套印误差≤ 0.1mm 模切走位≤±0.2mm （示例具体以实物为准） 工厂打印/Factory Printing： 供应商印刷图/Supplier's printed drawing： 生产条码白色打印，打印使用碳带需通过耐磨、腐蚀要求 Font Color: Pantone COOL Gray 6C Font: Amazon Ember 工厂打印/Factory Printing： 供应商印刷图/Supplier's printed drawing： Rating Label 2 打印使用碳带需通过耐磨、腐蚀要求 Color: White(Matched to Ring White) Color: White(Matched to Ring White) Rating Label 1- MP Draft 60.7mm 60.7mm 60.7mm 60.7mm 11.7mm 17.5mm SCAN DURING SETUP SCAN DURING SETUP 11.7mm 17.5mm 0 0 0 0 0 Date(日期)Version(版本) Specification(规格型号) HQ P/N(物料料号) Model(项目名称) Customer P/N(物料料号) Designer(设计) Check(审核) XXX XXX XXXX.XX.XX V1.0 Pencilfish 21-101232 Rating Label HQ6210201E5U0 R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM VPPCCCUUYWWDXXXX DSN: MAC: XX:XX:XX:XX:XX:XX R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM 100#mylar Glossy white polyester film, Acrylic Material comply with ROHS and HF 材质:

R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM 尺寸: 直径60.7mm （注： 表面必须为可二次打印材质） 色相正确、印迹牢固、 套印准确、各色套印 不露杂色，套印误差≤ 0.1mm 模切走位≤±0.2mm （示例具体以实物为准） 工厂打印/Factory Printing： 供应商印刷图/Supplier's printed drawing： 生产条码黑色打印，打印使用碳带需通过耐磨、腐蚀要求 Font Color: Pantone COOL Gray 6C Font: Amazon Ember 工厂打印/Factory Printing： 供应商印刷图/Supplier's printed drawing： Rating Label 2 打印使用碳带需通过耐磨、腐蚀要求 Color: White(Matched to Ring White) Color: White(Matched to Ring White) Rating Label 1- MP Draft 60.7mm 60.7mm 60.7mm 60.7mm 11.7mm 17.5mm 12345 SCAN DURING SETUP SCAN DURING SETUP SCAN DURING SETUP SCAN DURING SETUP SCAN DURING SETUP 11.7mm 17.5mm Date(日期)Version(版本) Specification(规格型号) HQ P/N(物料料号) Model(项目名称) Customer P/N(物料料号) Designer(设计) Check(审核) XXX XXX XXXX.XX.XX V1.0 Pencilfish 21-101233 Rating Label HQ6210201E5V0 DSN: XXXXXXXXXXXXX MAC: XX:XX:XX:XX:XX:XX R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM R005-103966 T P26-0054005 Ring Pan-Tilt Indoor Cam 2K Model: 5CNXA9 Power Input: 5 V 2 A FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 Ring / Amazon EU L-1855 Luxembourg / Amazon UK London EC2A 2FA ASSEMBLED IN VIETNAM 100#mylar Glossy white polyester film, Acrylic Material comply with ROHS and HF 材质:

DSN: XXXXXXXXXXXXX MAC: XX:XX:XX:XX:XX:XX Model: 5CNXA9 FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9 DSN: XXXXXXXXXXXXX MAC: XX:XX:XX:XX:XX:XX Model: 5CNXA9 FCC ID: 2AEUP-5CNXA9 IC : 20271-5CNXA9

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26N9UE 001 Auftrags-Nr.: Order no.: 48307082 Seite 1 von 11 Page 1 of 11 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-06-25 Auftraggeber: Client: Ring LLC 12515 Cerise Ave, Hawthorne, California United States 90250 Prü fgegenstand: Test item: Security Camera Bezeichnung / Typ-Nr.: Identification / Type no.: 5CNXA9 Auftrags-Inhalt: Order content: FCC Certification Prü fgrundlage: Test specification: IEEE Std C95.1 47 CFR §2.1091 47 CFR §1.1310 KDB 447498 D04 Wareneingangsdatum: Date of sample receipt: 2026-06-15 & 2026-06-24 Prü fmuster-Nr.: Test sample no: A004309097-010 A004316931-003 Prü fzeitraum: Testing period: 2026-07-03 - 2026-07-09 Ort der Prü fung: Place of testing: TÜ V Rheinland Taiwan Ltd. New Taipei Branch Prü flaboratorium: Testing laboratory: TÜ V Rheinland Taiwan Ltd. Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: compiled by: Anderson Chiu genehmigt von: authorized by: Flight Hsieh Datum: Date: 2026-08-07 Ausstellungsdatum: Issue date: 2026-08-07 Stellung / Position: Senior Project Manager Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN26N9UE 001 Seite 2 von 11 Page 2 of 11 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement resul…

Text truncated - open the document above for the full version.

Product Name: IPC131/132-Steel Plate AntennaProject:IPC131/132 Antenna type:PIFA stamping Part No.: Attachments: □ Specification□ Drawing□ Sample□ RoHS Report □ CPK Report□ FAI Report□ Reliability Report□ RoHS Questionnaire □ QC Flow Chart□ Material Verification Sheet□ Packing Content□ Safety Report * ROHS VendorDesignCheckApproval: Technology CheckMechanicalHardwareID Sourcing SoftwareKeypartEngineering SQE Project ManagerProduct ManagerCustomer Final CheckQuality PlanningRohs Status ■ RoHS □ Non-RoHS Approval condition □ Approved□ Reject Approval condition □ Conditional Approved Conditions: □ Temporary ApprovedLimited________Pcs for purchasing Approval by RD Leader（Technology Director） Quality Director * Audit by Technology Director or Qunality director on the conditions of special approval Distribute□ IQC□ hardware□ ME□ Software□ Components□ ID □ Vendor□ Customer□ outsoucing□Engineering□ SQE□ Others ________ Shanghai Chuangmi Technology Co., Ltd. Antenna specification sheet Part Description Manufacturer Description: Kunshan Yunzhihong Electronic Technology Co. LTD. Manufacturer Address:No.399, Jujin Road, Zhangpu Town, Kunshan City, Jiangsu Province CM0539-W01-10 5022AA013680/HQ260040001F0 1 2 DIRECTORY 3 SPEC 4Full size measurement report 5 Reliability Test Report 6 Antenna Performance Report 7 Antenna test configuation Content COVER Reversion DIM. # DIMENSION DRAWING ZONE + TOL.- TOL. NOTE SAMPLE 1SAMPLE 2SAMPLE 3SAMPLE 4SAMPLE 5UPPERLOWER 0%-25% 25%-50%50%-75% 75%-100% 100%+ Re-Measure Accept Fix Tool Accept With Variance DIMENSION+ TOL.- TOL. 14.30B20.10 0.10 4.324.224.384.324.2880%80%X 24.80B20.10 0.10 4.884.824.834.784.7680%40%X 314.70B40.20 0.20 14.8214.6814.6214.8014.7660%40%X 41.60B40.05 0.05 1.621.561.621.601.5840%80%X 51.60B40.05 0.05 1.621.601.581.601.5840%40% 66.40C30.200.206.356.326.526.456.4660%40%X 75.00C40.100.105.085.085.064.954.9680%50%X 82.40C30.100.102.482.452.422.342.3580%60%X 94.00C40.100.103.953.923.984.063.9960%80%X 1013.00D40.200.2013.1613.1213.0812.8912.8680%70%X 110.10B60.000.100.100.100.100.100.100%0%X up 120.10C60.000.100.100.100.100.100.100%0%X 13 14 15 16 17 18 19 Full Dimensions Report Comments Part Name IPC131/132-Steel Plate Antenna N/A Unit 304N/A Vendor A5 MaterialSUSPart No. Acceptance variance 5022AA013680 /HQ260040001F0 Tool NumberCav. Number Disposition CHUANG MI Model Date 2026.07.01 Measured Dimensions% Tolerance Used INCHES MILLIMETER CustomerWritten By Orig. Date Part NumberRevised By Revised Date Description1Approved By Approved Date CM0539-W01-10 SUS304 okQuantity audit:sunny The experimental results OK note Approved by the :maruiguoTesting personne:tangyinglong PH：6.5-7.2（neutral） The experiment described Post-experiment appearance Appearance normal, no obvious corrosion phenomenon Appearance after removal of corrosion products Appearance of the normal 5 PCS Experimental conditions The experimental time：20026/06/27,10:00 ~20026/06/29,10:00 Spray time：48 hoursMoisturizing time：48 hours Laboratory temperature：35°C±2°CPressure drum temperature：46°C±2°C Laboratory relative humidity：65％－ 75％ Atmospheric pressure：101-02KPA NACL concentration：5％±0.5％ sample The name of the The thicknes s of thecoati ng NIAU The material2~8um Appearance before experiment IPC131/132-Steel Plate Antenna panxinpu 2026/6/29 Test date：2026/6/27The experimental code：20260627001 The experimental method：Salt spray testThe experimental standard：Box test Reliability test report Chuangmi tangyinglong 5022AA013680 /HQ260040001F0 lanxuehua 2026/6/29 2026/6/29 CustomerWritten ByOrig. Date Part NumberRevised ByRevised Date Description1Approved By Approved date IPC131/132-Steel Plate Antenna Huang Fei 1-Jul-26 Antenna Performance Report Chuangmi Lai Weijian 1-Jul-26 5022AA013680 /HQ260040001F0 Liu Shiqiang 1-Jul-26 客 S 零 客 S 零制确 审 制确 CustomerWritten ByOrig. Date Part NumberRevised ByRevised Date Description1Approved By Approved date IPC131/132-Steel Plate Antenna Huang Fei 1-Jul-26 Antenna test configuation Chuangmi Lai Weijian 1-Jul-26 5022AA013680 /HQ260040001F0 Liu Shiqiang 1-Jul-26

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN261R9J 001 Auftrags-Nr.: Order no.: 48307082 Seite 1 von 30 Page 1 of 30 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-06-25 Auftraggeber: Client: Ring LLC 12515 Cerise Ave, Hawthorne, California United States 90250 Prü fgegenstand: Test item: Security Camera Bezeichnung / Typ-Nr.: Identification / Type no.: 5CNXA9 Auftrags-Inhalt: Order content: FCC Part 15C Test report (WiFi 2.4GHz) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 2026-06-15 & 2026-06-24 Prü fmuster-Nr.: Test sample no: A004309097-010 A004316931-003 Prü fzeitraum: Testing period: 2026-07-03 - 2026-07-09 Ort der Prü fung: Place of testing: TÜ V Rheinland Taiwan Ltd. New Taipei Branch Prü flaboratorium: Testing laboratory: TÜ V Rheinland Taiwan Ltd. Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass überprü ft von: compiled by: Anderson Chiu genehmigt von: authorized by: Flight Hsieh Datum: Date: 2026-08-07 Ausstellungsdatum: Issue date: 2026-08-07 Stellung / Position: Senior Project Manager Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN261R9J 001 Seite 2 von 30 Page 2 of 30 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement r…

Text truncated - open the document above for the full version.

Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A1 von A14 Page A1 of A14 Appendix A: Test Results of Conducted Test Test Result of 6 dB Bandwidth 802.11b Channel Frequency (MHz) 6 dB Bandwidth (MHz) Limit (MHz) Result 1 2412 7.03 > 0.5 Pass 6 2437 6.99 > 0.5 Pass 11 2462 7.03 > 0.5 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A2 von A14 Page A2 of A14 802.11g Channel Frequency (MHz) 6 dB Bandwidth (MHz) Limit (MHz) Result 1 2412 15.06 > 0.5 Pass 6 2437 15.10 > 0.5 Pass 11 2462 15.10 > 0.5 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A3 von A14 Page A3 of A14 802.11n HT20 Channel Frequency (MHz) 6 dB Bandwidth (MHz) Limit (MHz) Result 1 2412 15.10 > 0.5 Pass 6 2437 15.10 > 0.5 Pass 11 2462 15.10 > 0.5 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A4 von A14 Page A4 of A14 Test Result of 99% Occupied Bandwidth 802.11b Channel Frequency (MHz) 99% Bandwidth (MHz) 1 2412 12.67 6 2437 12.83 11 2462 12.67 Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A5 von A14 Page A5 of A14 802.11g Channel Frequency (MHz) 99% Bandwidth (MHz) 1 2412 16.54 6 2437 16.54 11 2462 16.38 Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A6 von A14 Page A6 of A14 802.11n HT20 Channel Frequency (MHz) 99% Bandwidth (MHz) 1 2412 17.62 6 2437 17.78 11 2462 17.54 Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A7 von A14 Page A7 of A14 Test Result of Power Spectral Density 802.11b Channel Frequency (MHz) Power Density (dBm/3kHz) Total PSD (dBm/3kHz) Limit (dBm/3kHz) Result 1 2412 -0.64 -0.64 8.00 Pass 6 2437 -0.55 -0.55 8.00 Pass 11 2462 -1.57 -1.57 8.00 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A8 von A14 Page A8 of A14 802.11g Channel Frequency (MHz) Power Density (dBm/3kHz) Total PSD (dBm/3kHz) Limit (dBm/3kHz) Result 1 2412 -3.98 -3.98 8.00 Pass 6 2437 -4.23 -4.23 8.00 Pass 11 2462 -6.39 -6.39 8.00 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A9 von A14 Page A9 of A14 802.11n HT20 Channel Frequency (MHz) Power Density (dBm/3kHz) Total PSD (dBm/3kHz) Limit (dBm/3kHz) Result 1 2412 -4.08 -4.08 8.00 Pass 6 2437 -4.24 -4.24 8.00 Pass 11 2462 -7.54 -7.54 8.00 Pass Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A10 von A14 Page A10 of A14 Test Result of Conducted Spurious Emissions 802.11b Channel 1 Channel 6 Channel 11 Prü fbericht - Nr.: Test Report No. CN261R9J 001 Seite A11 von A14 Page A11…

Text truncated - open the document above for the full version.