2AEVM1019337Digital Photo Frame

MerchSource, LLC. Applicant as U.S. Agent Letter of Attestation Date: 4/17/2026 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AEVM1019337 MerchSource, LLC. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: MerchSource, LLC. Contact Person: Shirley Luo Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: (424) 323-9039 Email: [email protected] FRN: 0024624587 Sincerely yours, Signature Printed Name: Shirley Luo Title: Senior Compliance Manager Email: [email protected]

MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: 4/17/2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AEVM1019337 MerchSource, LLC. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Shirley Luo Title: Senior Compliance Manager Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: 949-900-6598 Email: [email protected]

MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States 1 | P a g e Attestation Statements To: Federal Communications Commission Date: 4/20/2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AEVM1019337 Product Name: Digital Photo Frame This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Shirley Luo Title: Senior Compliance Manager Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: 949-900-6598 Email: [email protected] MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Device is not Inherent compliance ☒ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) Section Component Name Version Supplier 1 Frameo 1.30 Frameo A/S 2 3

MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States 4/17/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AEVM1019337 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos ⎯ External Photos ⎯ Test Setup Photos Sincerely, (Signature) Printed Name: Shirley Luo Title: Senior Compliance Manager Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: 949-900-6598 Email: [email protected]

MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States 4/17/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AEVM1019337 I, the undersigned, hereby authorize (Intertek Testing Service Shenzhen Ltd. Longhua Branch) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Intertek Testing Service Shenzhen Ltd. Longhua Branch) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (MerchSource, LLC.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website) Shirley Luo Title: Senior Compliance Manager Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: 949-900-6598 Email: [email protected]

MerchSource, LLC. 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Date: 4/17/2026 FCC ID: 2AEVM1019337 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, MerchSource, LLC, hereby declare that our product (Digital Photo Frame) Model Numbers: 1019337, 1021123 and 10XXXXX (where XXXXX can be digits 00000-99999, representing different customers) share the same PCB board, schematic, hardware version, software version, structure, and internal photos. The model names and appearance color differ due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Printed Name: Shirley Luo Title: Senior Compliance Manager Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Tel.: 949-900-6598 Email: [email protected]

Dis tributed by and © 2025 MerchSource, LLC. Irvine, CA 92618. All Rights Reserved. Made in China FCC ID: 2AEVM1019337 Model No.: 1019337 Batch Code: 59893A26160 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

INTERTEK TESTING SERVICES FCC ID: 2AEVM1019337 RF Exposure The equipment under test (EUT) is a Digital Photo Frame with 2.4G Wi-Fi function operating in 2412-2462MHz. The EUT is powered by DC 5V, 2A from adapter. For more detail information pls. refer to the user manual. 2.4G Wi-Fi: Type of Modulation: 802.11b:CCK, DQPSK, DBPSK for DSSS. 802.11g: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Antenna Type: FPC Antenna Antenna Gain: 1.86 dBi. (This information is provided by manufacturer, and the manufacturer is responsible for the authenticity of the provided information.) The nominal conducted output power specified: 22.0dBm (Tolerance: ±1dB). The maximun conducted output power for the EUT is 23.0dBm in the frequency 2462MHz (IEEE 802.11n20) which is within the production variation. The minimum conducted output power for the EUT is 21.2dBm in the frequency 2412MHz (IEEE 802.11b) which is within the production variation. According to FCC Part 2.1091, this unlicensed transmitting devices is categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, According to the KDB 447498 V06 and OET 65, the simple calculation as below: The source-based time averaged maximum radiated power = 23dBm +1.86dBi = 24.86dBm = 306.2mW From above data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna for 2.4GHz band can be calculated according to OET 65 as follow: = 306.2mW/ 4πR^2 = 0.0609 mW/cm^2 <1mW/cm^2 The MPE limit is 1.0 mW/cm^2 for general population and uncontrolled exposure in the WIFI frequency range according to FCC Part 1.1310. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structure and body of the user or nearby persons. The following RF exposure statement or similar sentence is proposed to be included in the user manual: “FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

MerchSource, LLC. TEST REPORT SCOPE OF WORK FCC TESTING– 1019337, 1021123, 10XXXXX(where XXXXX can be digits 00000-99999, representing different customers) REPORT NUMBER 250331015SZN-001 ISSUE DATE [REVISED DATE] Apr. 28, 2026 [--------------------] PAGES 26 DOCUMENT CONTROL NUMBER FCC ID 247_b © 2017 INTERTEK Intertek Report No.: 250331015SZN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 26 FCC ID 247_b TEST REPORT 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com RF Test Report Applicant: MerchSource, LLC. Address of Applicant: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Equipment Under Test (EUT) Product Name: Digital Photo Frame Model No.: 1019337, 1021123, 10XXXXX(where XXXXX can be digits 00000- 99999, representing different customers) FCC ID: 2AEVM1019337 Applicable Standards: FCC CFR Title 47 Part 15C (§15.247) Date of Test: Mar. 31, 2025 to May 10, 2025 Test Result: PASS Prepared and Checked by: Approved by: Tony Tang Johnny Wang Engineer Project Engineer Date: Apr. 28, 2026 TEST REPORT Intertek Report No.: 250331015SZN-001 Version: 01-November-2017 Page: 2 of 26 FCC ID 247_b 1 Revision History Report No. Version No. Description Issued Date 250331015SZN-001 01 Original Apr. 28, 2026 TEST REPORT Intertek Report No.: 250331015SZN-001 Version: 01-November-2017 Page: 3 of 26 FCC ID 247_b 2 Content 1 Revision History ........................................................................................................................................ 2 2 Content..................................................................................................................................................... 3 3 Summary of Test Result ............................................................................................................................ 4 4 General Information ................................................................................................................................. 5 5 Test Specifications .................................................................................................................................... 6 6 Antenna Requirement ............................................................................................................................ 10 7 Minimum 6dB bandwidth ....................................................................................................................... 11 8 Maximum Conducted Output Power ...................................................................................................... 12 9 Power spectrum density ......................................................................................................................... 13 10 Occupied Bandwidth .............................................................................................................................. 14 11 Emission outside the frequency band ..................................................................................................... 15 12 Radiated Emissions in restricted frequency bands .................................................................................. 16 13 AC Power line conducted emission ......................................................................................................... 24 TEST REPORT Intertek Report No.: 250331015SZN-001 Version: 01-November-2017 Page: 4 of 26 FCC ID 247_b 3 Summary of Test Result TEST ITEM FCC REFERANCE RESULT Minimum 6dB Bandwidth 15.247(a)(2) Pass Maximum Conducted Output Power 15.247(b)(3) Pass Power spectrum density 15.247(e) Pass Occupied bandwidth 2.1049 Pass Emission outside the frequency band 15.247(d) Pass Radiated Emission in restricted frequency bands 15.247(d), 15.205, 15.209 Pass AC Power line conducted emission 15.207(a) Pass Antenna requirement 15.203 Pass TEST REPORT Intertek Report No.: 250331015SZN-001 Version: 01-November-2017 Page: 5 of 26 FCC ID 247_b 4 General Information 4.1 Client Information Applicant: MerchSource, LLC. Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States Manufacturer: MerchSource, LLC. Address: 7755 Irvine Center Drive Suite 100 Irvine, CA 92618 United States 4.2 Description of Equipment Under Test (EUT) Product Name: Digital Photo Frame Model No.: 1019337, 1021123, 10XXXXX(where XXXXX can be digits 00000-99999, representing different customers) Model differences: Model No.: 1019337, 1021123, 10XXXXX were identical inside, the electrical circuit design, layout, components used and internal wiring, the difference lies in the appearance color and the different model names. Operation Frequency: 2412MHz - 2462MHz Channel Separation: 5MHz Channel Numbers: 11 (802.11b, g, n-HT20) Type of Modulation: IEEE 802.11b: DSSS(CCK,…

Text truncated - open the document above for the full version.

地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第1页共7页 天线规格书 AntennaSampleConfirmationFrom 供应商名称 VendorName 深圳市艾汇科技有限公司 ShenZhenAihuiTechnologyCo.，Ltd 客户名称 CustomerName 智创盛达 样品名称 SampleName 数码相框 产品型号 PartNumber FPC 样品规格 Specification WiFi天线：2218-XT-AH线长150mm1代端子 检验项目 InspectionItem 性能测试 Performance 外观检查 TotalAppearance 结构 structure 其它 Others 检验结果 Inspection Result 备注 Remark 品质审核 QAAudit 工程审核 EngineerAudit 曹杨 业务确认 Sales Confirm 以下由客户填写 ThefollowingarefilledbyCustomer 客户意见 Customer Evaluation 客户签字/盖章 Signation/ Chapter byCustomer 日期/date:2025.08.09 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第2页共7页 AntennaTestReport 测试单位:深圳市艾汇科技有限公司 Testby：ShenZhenAihuiTechnologyCo.，Ltd 材料 Material FPC+ 同轴线 天线类型 AntennaType PIFA 极化方式 Polarizationmode Linear 应用场景 Application 工作频段 Band 2400Mhz-2500MhzVSWR≤2 功率 Power Max：2W 阻抗 Impedance 50Ω 增益 dBi ≥1dBi 测试设备 TestEquipment HPE5071C、ShieldingRoom、3Dautomaticturntable AntennaDescription:： 1.Groundingprocessingandpicturedescription:no 2.Needtochangethemotherboardtomatch:no Testvoltage:3.6V,checktheantennacontactisgoodbeforetesting. TheRFcableoftheintegratedtesteriskeptinanaturalstateandcannotbe curled. Specification:testthespecifiedpowerlevel,allindicatorsmustconformtothe specifications. 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第3页共7页 1、项目图片 2、测试制具 3、天线匹配电路 4、S11测试 4.0S11测试方法说明 5、天线无源效率和增益 6、暗室测试设备和数据 6.0测试设备 6.1有源测试数据 7、天线装配示意图 8、天线环境处理 9、天线量产指标 10、结构图纸 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第4页共7页 1、项目图片 说明：客户最终验证天线性能样机保留在我司至少一年时间，便于分析解决天线量产中 异常情况，确保天线出货品质 2、测试制具 目的：尽可能准确地测试天线的无源参数。 制作方法：手机制具是用一根50欧姆的同轴电缆，一端连在手机主板的匹配电 路后端（射频测试孔前端）的测试点上，另一端连接SMA接头。示意图如下： 3、天线匹配电路 修改点/Modify E01E02E03 NoNoNo 备注：匹配无修改。 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第5页共7页 4.S11测试 4.0S11测试方法说明 测试设备：网络分析仪(E5071C) 测试方法：用一根50欧姆CABLE电缆从仪器测试端口导出，使用校准件校 准后连接手机制具的SMA接头，记录相关频点对应的回波损耗和驻波比。 测试示意图如下： 5、暗室测试设备和数据 6.0测试设备 测试系统:屏蔽暗室 测试环境:温度22°C±3°C，湿度50%±15% 测试设备:测试无源数据时,使用网络分析仪AgilentE5071C 测试有源数据时,使用综测仪CMW500 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第6页共7页 6.天线有源测试数据 测试数据： WIFI2.4G Freq(MHz)Efficiency(%)Gain(dBi) 2400 57.311.64 2410 55.141.57 2420 53.911.07 2430 58.421.74 2440 59.191.86 2450 56.311.51 2460 55.171.49 2470 56.911.53 2480 53.381.04 地址：深圳市宝安区西乡固戍南昌社区钜鑫科技产业园C栋402 TEL：0755-23203435FAX：0755-23203435 深圳市艾汇科技有限公司 第7页共7页 7. 天线环境处理 / 8 、天线量产指标 天线量产时，以驻波比作为量产测试标准。 根据项目本身的差异,给出如下标准： 频率 量产标准 2400MHZ-2500MHZ VSWR（量产性能）<VSWR(承认性能)+0.5 9. 结构图纸

Appendix of 250331015SZN-001 Page 1 of 26 Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency [MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 9.760 2407.320 2417.080 0.5 PASS 2437 9.760 2432.320 2442.080 0.5 PASS 2462 9.720 2457.360 2467.080 0.5 PASS 11G Ant1 2412 16.360 2403.800 2420.160 0.5 PASS 2437 16.360 2428.880 2445.240 0.5 PASS 2462 16.280 2453.920 2470.200 0.5 PASS 11N20SISO Ant1 2412 17.560 2403.240 2420.800 0.5 PASS 2437 17.600 2428.240 2445.840 0.5 PASS 2462 17.520 2453.240 2470.760 0.5 PASS Appendix of 250331015SZN-001 Page 2 of 26 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Appendix of 250331015SZN-001 Page 3 of 26 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 Appendix of 250331015SZN-001 Page 4 of 26 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix of 250331015SZN-001 Page 5 of 26 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency [MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 12.188 2406.126 2418.314 --- PASS 2437 12.228 2431.086 2443.314 --- PASS 2462 12.268 2456.086 2468.354 --- PASS 11G Ant1 2412 26.573 2400.052 2426.625 --- PASS 2437 26.813 2425.012 2451.825 --- PASS 2462 27.133 2449.852 2476.985 --- PASS 11N20SISO Ant1 2412 20.38 2402.889 2423.269 --- PASS 2437 20.659 2427.849 2448.508 --- PASS 2462 21.099 2452.849 2473.948 --- PASS Appendix of 250331015SZN-001 Page 6 of 26 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Appendix of 250331015SZN-001 Page 7 of 26 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 Appendix of 250331015SZN-001 Page 8 of 26 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix of 250331015SZN-001 Page 9 of 26 Appendix C: Maximum conducted output power Test Result TestMode Antenna Frequency [MHz] Conducted Power[dBm] Limit [dBm] Verdict 11B Ant1 2412 21.2 ≤30 Pass 2437 21.3 ≤30 Pass 2462 21.8 ≤30 Pass 11G Ant1 2412 22.4 ≤30 Pass 2437 22.7 ≤30 Pass 2462 22.9 ≤30 Pass 11N20SISO Ant1 2412 22.5 ≤30 Pass 2437 22.8 ≤30 Pass 2462 23.0 ≤30 Pass Appendix of 250331015SZN-001 Page 10 of 26 Appendix D: Maximum power spectral density Test Result TestMode Antenna Frequency [MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -4.45 <=8 PASS 2437 -5.88 <=8 PASS 2462 -4.94 <=8 PASS 11G Ant1 2412 -5.28 <=8 PASS 2437 -4.56 <=8 PASS 2462 -4.22 <=8 PASS 11N20SISO Ant1 2412 -4.87 <=8 PASS 2437 -5.01 <=8 PASS 2462 -4.54 <=8 PASS Appendix of 250331015SZN-001 Page 11 of 26 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 Appendix of 250331015SZN-001 Page 12 of 26 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 Appendix of 250331015SZN-001 Page 13 of 26 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix of 250331015SZN-001 Page 14 of 26 Appendix E: Band edge measurements Test Result TestMode Antenna ChName Frequency [MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 7.19 -29.71 <=-12.81 PASS High 2462 8.28 -37.32 <=-11.72 PASS 11G Ant1 Low 2412 8.76 -15.39 <=-11.24 PASS High 2462 8.98 -20.02 <=-11.02 PASS 11N20SISO Ant1 Low 2412 5.95 -22.7 <=-14.05 PASS High 2462 4.88 -26.26 <=-15.12 PASS Appendix of 250331015SZN-001 Page 15 of 26 Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 Appendix of 250331015SZN-001 Page 16 of 26 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 11N20SISO_Ant1_High_2462 Appendix of 250331015SZN-001 Page 17 of 26 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Frequency [MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 8.59 8.59 --- PASS 0.009~2400 8.59 -28.18 <=-11.41 PASS 2483.5~25000 8.59 -43.86 <=-11.41 PASS 2437 Reference 9.53 9.53 --- PASS 0.009~2400 9.53 -52.57 <=-10.47 PASS 2483.5~25000 9.53 -44.85 <=-10.47 PASS 2462 Reference 9.51 9.51 --- PASS 0.009~2400 9.51 -55.71 <=-10.49 PASS 2483.5~25000 9.51 -40.07 <=-10.49 PASS 11G Ant1 2412 Reference 10.13 10.13 --- PASS 0.009~2400 10.13 -14.24 <=-9.87 PASS 2483.5~25000 10.13 -44.48 <=-9.87 PASS 2437 Reference 8.93 8.93 --- PASS 0.009~2400 8.93 -40.02 <=-11.07 PASS 2483.5~25000 8.93 -41.32 <=-11.07 PASS 2462 Reference 9.05 9.05 --- PASS 0.009~2400 9.05 -49.96 <=-10.95 PASS 2483.5~25000 9.05 -23.01 <=-10.95 PASS 11N20SISO Ant1 2412 Reference 6.25 6.25 --- PASS 0.009~2400 6.25 -20.33 <=-13.75 PASS 2483.5~25000 6.25 -43.73 <=-13.75 PASS 2437 Reference 7.39 7.39 --- PASS 0.009~2400 7.39 -44.93 <=-12.61 PASS 2483.5~25000 7.39 -45.07 <=-12.61 PASS 2462 Reference 8.22 8.22 --- PASS 0.009~2400 8.22 -50.86 <=-11.78 PASS 2483.5~25000 8.22 -26.01 <=-11.78 PASS Note: offset=cable loss Appendix of 250331015SZN-001 Page 18 of 26 Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_0.009~2400 11B_Ant1_2412_2483.5~25000 Appendix of 250331015SZN-001 Page 19 of 26 11B_Ant1_2437_0~Reference 11B_Ant1_2437_0.009~2400 11B_Ant1_2437_2483.5~25000 Appendix of 250331015SZN-001 Page 20 of 26 11B_Ant1_2462_0~Reference 11B_Ant1_2462_0.009~2400 11B_Ant1_2462_2483.5~25000 Appendix of 250331015SZN-001 Page 21 of 26 11G_Ant1_2412_0~Reference 11G_Ant1_2412_0.009~2400 11G_Ant1_2412_2483.5~25000 Appendix of 250331015SZN-001 Page 22 of 26 11G_Ant1_2437_0~Reference 11G_Ant1_2437_0.009~2400 11G_Ant1_2437_2483.5~25000 Appendix of 250331015SZN-001 Page 23 of 26 11G_Ant1_2462_0~Reference 11G_Ant1_2462_0.009~2400 11G_Ant1_2462_2483.5~25000 Appendix of 250331015SZN-001 Page 24 of 26 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_0.009~2400 11N20SISO_Ant1_2412_2483.5~25000 Appendix of 250331015SZN-001 Page 25 of 26 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_0.009~2400 11N20SISO_Ant1_2437_2483.5~25000 Appendix of 250331015SZN-001 Page 26 of 26 11N20SISO_Ant1_2462_0~Reference 11N20SISO_Ant1_2462_0.009~2400 11N20SISO_Ant1_2462_2483.5~25000 Note: offset=cable loss