2AEYU-R6Ranger R Series Radar 9GHz band

FLIR Unmanned Aerial Systems ULC 4176, boul. Industriel, Laval QC H7L 6H1 Canada [T] 450.622.7557 [F] 450.622.7134 www.teledyneflir.com 2021-12-09 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification FCC ID: 2AEYU-R6. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with FLIR Unmanned Aerial Systems ULC, 4176 Boul. Industriel, Laval, QC H7L 6H1, Canada. Dated this 9 th Day of December 2021 Agency agreement expiration date: May 30, 2023 By: Pierre Poitevin Signature Printed Title: VP, Radar Systems On behalf of : FLIR Unmanned Aerial Systems ULC Telephone: +1.514.572.4345

FLIR Unmanned Aerial Systems ULC 4176, boul. Industriel, Laval QC H7L 6H1 Canada [T] 450.622.7557 [F] 450.622.7134 www.teledyneflir.com 12/09/2021 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: 2AEYU-R6 Models: Ranger® R6SS and Ranger® R6SS-U Request for Permanent Confidentiality Pursuant to Sections 0.457(d) and 0.459 of the Commission’s rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Bill of Materials • Operational Description • User’s Manual • Internal Photos • Tune-up These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. The device is not accessible to the public, typically mounted on the top of a large tower, Mobile /Lightweight Vehicle Surveillance System for border patrol (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices are under an NDA restricting the disclosure of the propriety information, including internal photos and user’s manual. Dated: 12/9/2021 Signed: Printed name: Pierre Poitevin Title: VP, Radar Systems

FLIR NDA (Rev.General.19May2021) FLIR Confidential Page 1 of 3 MUTUAL NON-DISCLOSURE AGREEMENT This Mutual Non-Disclosure Agreement (this “Agreement”) is entered into as of the last date signed below (the “Effective Date”), between Teledyne FLIR, LLC, located at 27700 SW Parkway Avenue, Wilsonville, OR 97070, USA (“FLIR”), and , located at , (“Company”) to protect the confidentiality of certain Confidential Information (defined below) of FLIR and/or of Company, and their respective Affiliates, to be disclosed under this Agreement solely for the purpose of evaluating a potential business relationship (the “Permitted Use”). FLIR and Company are referred to herein individually or collectively as a “Party” or as the “Parties”. NOW, THEREFORE, for good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the Parties intending to be bound hereby agree as follows: 1. Confidential Information. For the purposes of this Agreement, “Confidential Information” of a Party means any and all information, including third party information, disclosed by one Party and/or any of its Affiliates (“Disclosing Party”) to the other Party and/or any of its Affiliates (“Recipient”) during the term of this Agreement which (i) if provided in tangible format is labelled at the time of such disclosure as “confidential” or bearing a similar legend, (ii) if provided in oral or intangible format is identified as confidential at the time of disclosure and is summarized in writing and delivered to Recipient within 30 days of disclosure, or (iii) the Recipient should reasonably understand to be confidential to the Disclosing Party based on the nature or circumstances of the disclosure. Subject to the foregoing, Confidential Information may include, but is not limited to, the following types of information: trade secrets, inventions, discoveries, ideas, concepts, formulas, patents pending or to be filed, designs, drawings, plans, specifications, techniques, models, prototypes, data, computer source and object code, evaluations, documentation, manuals, diagrams, flow charts, schematics, research and development plans, know-how, marketing techniques and materials, customer, supplier, and pricing information, contracts, budgets and financial statements. “Affiliates” shall mean with respect to either Party, any other entity directly or indirectly controlling, controlled by, or under common control with such Party. Each Party shall be responsible for the breach of the terms of this Agreement by its Affiliates. 2. Confidentiality Obligations. Subject to the section titled “Confidentiality Exceptions,” Recipient agrees that it will (a) hold in confidence and not disclose to any third party any Confidential Information of Disclosing Party, except in accordance with the terms of this Agreement; (b) protect such Confidential Information with at least the same degree of care that Recipient uses to protect its own Confidential Information of a similar nature, but in no case, less than reasonable care; (c) use the Disclosing Party’s Confidential Information for no purpose other than the Permitted Use; (d) limit access to Disclosing Party’s Confidential Information to those of Recipient’s and its Affiliates’ employees or individual contractors having a need to know as part of the Permitted Use and who have signed confidentiality agreements containing, or are otherwise bound by, confidentiality obligations at least as restrictive as those contained herein; and (e) notify Disclosing Party promptly upon discovery of any loss or unauthorized disclosure of Disclosing Party’s Confidential Information. Disclosing Party will not communicate any information to Recipient in violation of the proprietary rights of any third party. 3. Confidentiality Exceptions. The Recipient shall not have any obligations with respect to any portion of the Disclosing Party’s Confidential Information which the Recipient can demonstrate: (a) was already in the possession of the Recipient without an accompanying duty of confidentiality before the disclosure to the Recipient by the Disclosing Party; (b) is subsequently disclosed to the Recipient without an accompanying duty of confidentiality by a third party who is not in breach of any obligation of confidence; (c) is or becomes generally available to the public through no act or default on the part of the Recipient; or (d) is disclosed by the Recipient with the prior written approval of the Disclosing Party, which specifies the proposed recipient, and the purpose of the intended disclosure; or (e) is independently developed by Recipient without use of or reference to the Disclosing Party’s Confidential Information. Recipient may disclose the Disclosing Party’s Confidential Information in compliance with a valid order of a court or other governmental body having jurisdiction, provided that: (i) the Disclosing Party is notified of any intended disclosure pursuant to this clause as soon as is reasonably practicable; (ii) the Recipient reasonably cooperates with the Disclosing Party and its representatives in their efforts to seek confidential treatment of the information disclosed; and (iii) the Recipient complies with any applicable protective order or equivalent. 4. No License Granted. Confidential Information is and shall remain the sole property of Disclosing Party. Recipient recognizes and agrees that nothing contained in this Agreement shall be construed as granting to Recipient any rights to or under any patent, copyright, trademark, trade secret or mask work of the Disclosing Party, or, except as expressly set forth in this FLIR NDA (Rev.General.19May2021) FLIR Confidential Page 2 of 3 Agreement, as granting to Recipient any rights in or to the Confidential Information of the Disclosing Party. Neither this Agreement nor the disclosure of any Confidential Information hereunder shall result in any obligation on the part of either Party to enter into any further agreement with the…

Text truncated - open the document above for the full version.

FLIR Terms and Conditions of Sale (Rev.20.May.2021) -1- TERMS AND CONDITIONS - SALES The following Terms and Conditions (these “Terms and Conditions”) are applicable to the sale of hardware, data, software and services (“Products”) by Teledyne FLIR, LLC, or one of its Affiliates, as identified in the Acknowledgement (FLIR or such Affiliates are each referred to in these Terms and Conditions as “FLIR” or “Seller”) to any purchaser thereof (“You” or “Buyer”). Except as provided in Section 2, these Terms and Conditions together with the Seller’s quotation, Acknowledgement, terms incorporated into this Agreement by reference in these Terms and Conditions, and the price, quantity and delivery terms contained in Buyer’s purchase order constitutes the entire and exclusive agreement between Seller and Buyer (collectively, this “Agreement”). “Affiliates” means, with respect to either Party, any other entity directly or indirectly controlling, controlled by, or under common control with such Party. “Acknowledgement” means the sales order confirmation or order acknowledgement issued by FLIR to You which confirms the Products ordered, pricing and other relevant terms of the transaction. 1. INTERNAL OR OTHER USE. Buyer represents and warrants that it intends to use the Products for its internal use and is not purchasing the Products with the intent to resell or distribute the Products, unless authorized by Seller in the Acknowledgement. 2. CONTROLLING TERMS. If the parties have in effect a formal written agreement executed by duly authorized representatives of both parties related to the sale of Products by FLIR to You (a “Formal Agreement”), and there is a conflict among the terms of the Formal Agreement, these Terms and Conditions and this Agreement, the terms of the Formal Agreement will be first in order of precedence, and will prevail over these Terms and Conditions, and all of the foregoing will prevail over any other terms of this Agreement. . Except as provided in the preceding sentence, this Agreement shall govern the sale of the Products to Buyer. If Buyer submits any other document that contains terms and conditions which are inconsistent with or in addition to this Agreement, then any such term or condition shall not alter this Agreement unless duly executed by an authorized executive of Seller. The sale of Products is expressly conditioned upon Buyer’s acceptance of this Agreement. 3. PURCHASE PRICE, TAXES, PAYMENT AND CREDIT. Except as otherwise stated in the Acknowledgement, prices are stated in United States of America (“U.S.”) dollars. The purchase price includes the costs of standard packaging of the Products; but excludes: (a) transportation, customs duties, insurance or any other costs or fees that may apply to the sale and delivery of the Products; and (b) any federal, state, municipal or other governmental tax applicable to the sale of the Products to Buyer, if any. All such taxes shall be in addition to the purchase price and be paid by Buyer unless otherwise agreed to or required by law. Buyer acknowledges and agrees that the full purchase price for the Products shall be due and payable thirty (30) days after receipt of invoice unless FLIR requires payment by letter of credit, in advance of delivery or on other terms. All past due payments bear interest at the rate of one and one-half percent (1.5%) per month or the maximum amount allowed by law, whichever is less, on the unpaid balance. If Buyer fails to timely pay the purchase price for any Products, or fails to perform any other of Buyer’s obligations hereunder, Seller may, at its option, defer further shipments, revise its terms of payment, cancel the unshipped balance of the Agreement, and/or pursue any other remedy set forth in this Agreement or provided under law. 4. DELIVERY. Except as otherwise stated in the Acknowledgement, all Products are shipped within the United States FOB Origin FLIR’s facility, and outside the United States FCA (INCOTERMS 2020) FLIR’s facility. Delivery shall occur, risk of loss shall pass, and title (to the extent applicable) shall transfer to Buyer upon delivery of Products at the named place (“Delivery”). All Delivery dates contained in the Acknowledgement are estimates and Seller has no liability for any delay in Delivery. 5. LIMITED WARRANTY, EXCLUSIONS AND DISCLAIMERS. A. Limited Warranty. Unless superseded by individual Product warranty terms set forth in the Specifications, a warranty section of FLIR’s website at www.FLIR.com, or in this Agreement, SELLER WARRANTS THAT FROM THE DATE OF DELIVERY AND FOR A PERIOD OF ONE YEAR, THE PRODUCTS WILL CONFORM IN ALL MATERIAL RESPECTS TO ITS SPECIFICATIONS AT THE TIME OF SALE AND BE FREE FROM MATERIAL DEFECTS UNDER PROPER USE AND SERVICE IN ACCORDANCE WITH THE SPECIFICATIONS. “Specifications” means the specifications delivered to Buyer with or in the Product and/or published on FLIR’s website for the applicable version of the Product. Buyer agrees that Specifications and other warranty information may be supplied only in the English language, unless otherwise required by local law without the possibility of contractual waiver or limitation. This limited warranty extends only to Buyer and is not transferable to any other party and any transfer made in violation of this provision shall be void. The warranty applies only to the unmodified portion of the Products. Buyer is responsible for the results obtained from the use of the Products. Buyer’s sole remedy, and Seller’s sole liability, for any breach of the foregoing warranty shall be to replace or repair any part or parts (or redeliver services) which were delivered in breach of the foregoing warranty. B. Warranty Exclusions and Disclaimers. SELLER MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (EVEN IF BUYER HAS NOTIFIED SELLER OF ITS INTENDED USE FOR THE PRODUCTS) OR NON- INFRINGEMENT. SELLER FURTH…

Text truncated - open the document above for the full version.

FLIR Unmanned Aerial Systems ULC 4176, boul. Industriel, Laval QC H7L 6H1 Canada [T] 450.622.7557 [F] 450.622.7134 www.teledyneflir.com 2021-12-13 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Tel: +1 613 737 9680 Attn: Director of Certification Subject: Models Differences Declaration FCC We hereby request the following models listed under FCC: 2AEYU-R6: For Models: Ranger® R6SS; P/N: 921-0071-0X, Ranger® R6SS-U; P/N: 921-0071-5X, where X represent the color. 1 = TAN, 2 = GREEN, 3 = White, 4 = GRAY. We declare that these models are electrically, technically the same. They are transmitting at same output power level. The differences in these models are mainly in the transmit and receive antenna patterns that allow for the R6SS to have longer range detection, for the R6SS-U to have greater elevation coverage but shorter range of detection. Sincerely, Dated this 13 th Day of December 2021 By: Pierre Poitevin Signature Printed Title: VP, Radar Systems Telephone: +1.514.572.4345

FCC ID: 2AEYU-R6 21/02/2022 2AEYU-R6 Exhibit 12 External Photos (NC).doc Page 1 of 2 EXPORT CONTROL NOTICE- “THIS DOCUMENT DOES NOT CONTAIN EXPORT-CONTROLLED INFORMATION” This documentation contains proprietary information FLIR Unmanned Aerial Systems ULC. This information must be maintained in confidence and used only in a manner consistent with the documentation and any executed Non-Disclosure Agreement and may not be disclosed to any third parties without FLIR's written consent. Exhibit 12 External Photos Only one set of pictures of one model is shown because all two models have the same appearance. They are also in different colors (TAN, GREEN, WHITE, GRAY). Figure 1 Front view Figure 2 Rear view FCC ID: 2AEYU-R6 21/02/2022 2AEYU-R6 Exhibit 12 External Photos (NC).doc Page 2 of 2 EXPORT CONTROL NOTICE- “THIS DOCUMENT DOES NOT CONTAIN EXPORT-CONTROLLED INFORMATION” This documentation contains proprietary information FLIR Unmanned Aerial Systems ULC. This information must be maintained in confidence and used only in a manner consistent with the documentation and any executed Non-Disclosure Agreement and may not be disclosed to any third parties without FLIR's written consent. Figure 3 Left & Right-side view Figure 4 Top & Bottom view

FCC ID: 2AEYU-R6 12/15/2021 2AEYU-R6 Exhibit 10 ID Label (NC).doc Page 1 of 3 EXPORT CONTROL NOTICE- “THIS DOCUMENT DOES NOT CONTAIN EXPORT-CONTROLLED INFORMATION” This documentation contains proprietary information FLIR Unmanned Aerial Systems ULC. This information must be maintained in confidence and used only in a manner consistent with the documentation and any executed Non-Disclosure Agreement and may not be disclosed to any third parties without FLIR's written consent. Product Label and Placement The labels shown below is affixed on the back of the radar shell as indicated below. The labels are made of 3M label material 7813 (matte silver polyester) and is affixed with a permanent adhesive. FCC ID: 2AEYU-R6 12/15/2021 2AEYU-R6 Exhibit 10 ID Label (NC).doc Page 2 of 3 EXPORT CONTROL NOTICE- “THIS DOCUMENT DOES NOT CONTAIN EXPORT-CONTROLLED INFORMATION” This documentation contains proprietary information FLIR Unmanned Aerial Systems ULC. This information must be maintained in confidence and used only in a manner consistent with the documentation and any executed Non-Disclosure Agreement and may not be disclosed to any third parties without FLIR's written consent. Figure 1 Label placement Label Placement FCC ID: 2AEYU-R6 12/15/2021 2AEYU-R6 Exhibit 10 ID Label (NC).doc Page 3 of 3 EXPORT CONTROL NOTICE- “THIS DOCUMENT DOES NOT CONTAIN EXPORT-CONTROLLED INFORMATION” This documentation contains proprietary information FLIR Unmanned Aerial Systems ULC. This information must be maintained in confidence and used only in a manner consistent with the documentation and any executed Non-Disclosure Agreement and may not be disclosed to any third parties without FLIR's written consent. Alternate Logo with Teledyne FLIR

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC MPE calculation; Date: May 2021 Choose Scandinavian trust RADIO TEST REPORT – 452397APFWL Type of assessment: MPE Calculation report Applicant: Product: FLIR Unmanned Aerial Systems ULC Ranger R Series Radar 9GHz band Model: Model Variant: Ranger® R6SS-U Ranger® R6SS FCC ID: 2AEYU-R6 Specifications:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06 Date of issue: March 21, 2022 Yong Huang, EMC/RF Specialist Prepared by Signature Report reference ID: 452397APFWL Page 2 of 7 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 452397APFWL Page 3 of 7 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE calculation for standalone transmission ........................................................................................................................................................... 4 Section 1.1 MPE calculation for standalone transmission Report reference ID: 452397APFWL Page 4 of 7 Evaluation summary 1.1 MPE calculation for standalone transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. Equation from page 18 of OET Bulletin 65, Edition 97-01 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) Section 1.1 MPE calculation for standalone transmission Report reference ID: 452397APFWL Page 5 of 7 1.1.2 EUT technical information Prediction frequency 9650 MHz Antenna type Radar antenna Antenna gain 9 dBi for R6SS-3D/U; 17.5 dBi for R6SS Number of antennas 1 Maximum transmitter conducted power 39.09 dBm (8 W) Prediction distance As table below R6SS (8W) R6SS-3D/U (8W) Uncontrolled Controlled Uncontrolled Controlled Prediction distance(cm): 200 90 80 40 Section 1.1 MPE calculation for standalone transmission Report reference ID: 452397APFWL Page 6 of 7 1.1.3 MPE calculation 1. For R6SS, uncontrolled exposure, 8W operation 2. For R6SS, controlled exposure, 8W operation Output power nominal: 8 W Fundamental transmit (prediction) frequency:9650MHz Maximum measured conducted peak output power:39.09dBm Cable and/or jumper loss:0.0dB Maximum peak power at antenna input terminal:39.09dBm Tx On time:100.000ms Tx period time:100.000ms Average factor:100% Maximum calculated average power at antenna input terminal:8109.611mW Single Antenna gain (typical):17.5d…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC 90-I, RSS-119 Issue 12; Date: April, 2020 Choose Scandinavian trust RADIO TEST REPORT – 452397-1TRFWL Type of assessment: Final product testing Applicant: Product: FLIR Unmanned Aerial Systems ULC Ranger R Series Radar 9GHz band Model: Model variant(s): Ranger® R6SS-U (921-0071-5X) Ranger® R6SS (921-0071-0X) FCC ID: 2AEYU-R6 Specification: FCC 47 CFR Part 90 Subpart F Date of issue: March 21, 2022 Yong Huang, EMC/RF Specialist Tested by Signature Fahar A Sukkoor, EMC/RF Specialist Reviewed by Signature Report reference ID: 452397-1TRFWL Page 2 of 33 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Fax: +1 613 256-8848 Test site registration Organization Recognition numbers and location FCC/ISED FCC: CA2040; IC: 2040A-4 (Ottawa/Almonte); FCC: CA2041; IC: 2040G-5 (Montreal); CA0101 (Cambridge) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 452397-1TRFWL Page 3 of 33 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ............................................................................................................................................................…

Text truncated - open the document above for the full version.