2AF2R-81RX2.4GHz Digital Wireless Video Baby Monitor

HB6081说明书 (hellobaby) 说明书为折叠式 尺寸：630*120MM 材质：100g双胶纸（彩色） 版本：V1.1 类型：环保 设计 审核审批 王勇 2023/06/19 Ver: 1.0 版本 修改内容日期 文件首发。 2023/01/03 7 8 11. MAINTENANCE * Clean your baby monitor with a slightly damp or anti-static cloth. * Never use cleaning agents or solvents. 12. DISPOSAL GUIDE FOR BATTERY AND PRODUCT * Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit; * Remember to dispose of the product in an environmentally responsible way; * For proper collection and processing of these products, take them to the collection points designated by local authorities. You can also contact the store where you purchased the product. Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause personal injury or damage to property. Use only the types of the batteries which are indicated in this manual. CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degree C or Incinerate. Follow Manufacturer's Instructions. - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; - A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. - The battery shall not be exposed to excessive heat such as sunshine, fire or the like; FCC& ISDE Statement This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la partie 15 des règles de la FCC et aux normes RSS exemptées de licence d’Industrie Canada. Le fonctionnement est soumis aux deuxconditions suivantes : (1)cet appareil ne doit pas causer d’interférences nuisibles, et (2)cet appareil doit accepter toute interférence reçue, y compris les interferences pouvant entraîner un fonctionnement indés. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 9 Audio feedback (high pitched noise) Interference or poor reception * Move the monitor close to the camera; * The camera or monitor may be placed too close to many metal objects; * Other electronic devices may be interfering with the signal; * The battery power may be too low; * The camera and monitor may be placed too closed; * The volume on the monitor may be set too high; Frozen picture on screen * Repower the baby unit (plug out the adapter, then plug it into the socket again); * Press the RESET key at the back of parent unit No reception on the monitor * The power adapters may not be properly connected; * Confirm that the camera and monitor are ON; * Camera may be far away from the monitor; * Camera and monitor may not be properly paired; follow PAIRING instrucons; 10. TROUBLE SHOOTING



3. Press the MENU Key .The sub-menu Settings will pop up.



4. Press
◀
/

▶
/
▲
/
▼ to
select
default settings , press the MANU key to enter.



5. Select icon to restore default setting; Select icon to cancel the default setting;


6. Press the Return Key one time to exit sub-menu , and two times exit main menu. 8.8.2 ALARM VOULME SETTING


1.
Press MENU Key, the Main Menu will pop up. 2. Press the
◀
/

▶
/
▲
/
▼ key
until
the
Setting
icon







is
selected.
3. Press the MENU Key . The sub-menu Settings will pop up.


4. Press
◀
/

▶
/
▲
/
▼ to
select
default settings , press the MANU key to enter.



5. Select icon to restore default setting; Select icon to cancel the default setting;


6. Press the Return Key one time to exit sub-menu, and two times exit main menu. 8.8.2 ALARM VOULME SETTING


1.
Press MENU Key, the Main Menu will pop up. 2. Press the
◀
/

▶
/
▲
/
▼ key
until
the
Setting
icon







is
selected.
3. Press the MENU Key .The sub-menu Settings will pop up. 4. Press
◀
/

▶
/
▲
/
▼ to
select ALARM . 5. Select volume increase icon , press MANU key to incress the alarm volume. 6. Select volume decrease icon , press MANU key to decrease the alarm volume. 7. Press the Return Key one time to exit sub-menu, and two times exit main menu. 8.8.3 CONTACT
1.
Press MENU Key, the Main Menu will pop up. 2. Press the
◀
/

▶
/
▲
/
▼ key
until
the
Setting
icon







is
selected.
3. Press the MENU Key .The sub-menu Settings will pop up. 4. Press
◀
/

▶
/
▲
/
▼ to select Contact . 5. Press MANU key . You can see our brand HelloBaby, our Email address and Website. 6. Press the Return Key one time to exit sub-menu, and two times exit main menu. 8.8.4 DATE/TIME SETTING 1.
Press MENU Key, the Main Menu will pop up. 2. Press the
◀
/

▶
/
▲
/
▼ key
until
the
Setting
icon







is
selected.
3. Press the MENU Key .The sub-menu Settings will pop up. 4. Press
◀
/

▶
/
▲
/
▼ key until the time icon is selected . 5. Press
◀
/

▶
key to select Month, Day and Year
setting; Press
▲
/
▼ key to set your desired month, date and year. 6. Press the
◀
/

▶
key to select the tim…

Text truncated - open the document above for the full version.

Shenzhen Videotimes Technology Co.,Ltd Add: Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Date: 2023-4-14 FCC ID: 2AF2R-81RX Dear Sir/Madam, We, Shenzhen Videotimes Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, All these models are identical in the same PCB, layout and circuitry, the only difference is the different sales designation: Product name: 2.4GHz Digital Wireless Video Baby Monitor Model no.: HB6081, BBM818, BBM818-2, BBM818RX, HB6081-2, HB6081RX, VT510, VT510-2, VT510RX, FK8160, FK8160-2, FK8160RX, JA2302, JA2302-2, JA2302RX, BG1055, BG1055-2, BG1055RX, VV6010, VV6010-2, VV6010RX, BL9055, BL9055-2, BL9055RX Sincerely, Name/Title： Chris Liu/General Manager Company: Shenzhen Videotimes Technology Co.,Ltd Address: Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Phone: +86-755-26966058 Fax: +86-755-26966058 E-Mail: [email protected]

Shenzhen Videotimes Technology Co.,Ltd Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Date: 2023-4-14 FCC ID: 2AF2R-81RX Model Number: HB6081 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Videotimes Technology Co.,Ltd, declare that this EUT (FCC ID: 2AF2R-81RX) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Chris Liu/General Manager Company: Shenzhen Videotimes Technology Co.,Ltd Address: Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Phone: +86-755-26966058 Fax: +86-755-26966058 E-Mail: [email protected]

Shenzhen Videotimes Technology Co.,Ltd Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-4-14 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AF2R-81RX including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Chris Liu/General Manager Company: Shenzhen Videotimes Technology Co.,Ltd Address: Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Phone: +86-755-26966058 Fax: +86-755-26966058 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-4-14> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AF2R-81RX HB6081 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Chris Liu/General Manager Company: Shenzhen Videotimes Technology Co.,Ltd Address: Room 2106, Building 11, Tianan Yungu Phase II(Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong.China Phone: +86-755-26966058 Fax: +86-755-26966058 E-Mail: [email protected]

FCC ID: 2AF2R-81RX TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2AF2R-81RX TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT WiFi Antenna FCC ID: 2AF2R-81RX TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of Adapter

FCC ID: 2AF2R-81RX TB-RF-074-1.0 Appendix IFCC ID Label FCC ID: 2AF2R-81RX TB-RF-074-1.0 Appendix II ID Label Location ID LOCATION

FCC ID: 2AF2R-81RX TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 7 Internal of EUT Photo 8 Internal of EUT FCC ID: 2AF2R-81RX TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT FCC ID: 2AF2R-81RX TB-RF-074-1.0 Photo 11 Appearance of EUT

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China SAR Test Report For Applicant Name: Shenzhen Videotimes Technology Co., Ltd. Address: Room 2106, Building 11, Tianan Yungu Phase II (Plot of Land 02-08) , Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China EUT Name: 2.4GHz Digital Wireless Video Baby Monitor Brand Name: N/A Model Number: HB6081 Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230411R02701 Test Standards: 47 CFR Part 2.1093 IEEE1528-2013 IEEE C95.1-2019 KDB 447498 D01 KDB 447498 D04 KDB 865664 D01 KDB 865664 D02 KDB 248227 D01 KDB 648474 D04 KDB 941225 D07 KDB 690783 D01 FCC ID: 2AF2R-81RX Test Conclusion: Pass Test Date: 2023-04-17 Date of Issue: 2023-04-17 Prepared By: Monica Zhou / Project Engineer Date: 2023-04-17 Approved By: Ryan.CJ / EMC Manager Date: 2023-04-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number:BTF230411R02701 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-04-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number:BTF230411R02701 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................... 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ......................................................................................................... 4 1.3 Laboratory Condition ....................................................................................................................................................... 4 1.4 Announcement ................................................................................................................................................................ 4 2. Product Information .................................................................................................................................................................. 5 2.1 Application Information ................................................................................................................................................... 5 2.2 Manufacturer Information ................................................................................................................................................ 5 2.3 Factory Information ......................................................................................................................................................... 5 2.4 General Description of Equipment under Test (EUT) ..................................................................................................... 5 2.5 Equipment under Test Ancillary Equipment .................................................................................................................... 5 2.6 Technical Information ...................................................................................................................................................... 5 3. Summary of Test Results ......................................................................................................................................................... 6 3.1 Test Standards ................................................................................................................................................................ 6 3.2 Device Category and SAR Limit ..................................................................................................................................... 7 3.3 Test Result Summary...................................................................................................................................................... 7 3.4 Test Uncertainty .............................................................................................................................................................. 8 4. Measurement System ............................................................................................................................................................ 10 4.1 Specific Absorption Rate (SAR) Definition .................................................................................................................... 10 4.2 MVG SAR System .......................................................................................................................................................…

Text truncated - open the document above for the full version.

ShenZhenXinErShengTechnologyCo.,Ltd SPECIFICATIONFORAPPROVAL Customernane：BeiNaiTe Productname ：2.4Gcoppertubeantenna1.13graywireL=190MM CustomerPart Number:W1-1301--3226-002-04 Manufacturersof Material :SFANT12G13299 Deliverquantity：5PCS MarkCheckExamineand approve Datelanded Biao LisenAmy 2022.12.27 ThatCustomers： AcknowledgeCheckExamineand approve Datelanded ShenZhenXinErShengTechnologyCo.,Ltd Maintechnicalparametersoftheproduct Maintechnicalspecifications FrequencyRange(MHZ)2400-2483 Gain （ dBi ）2.5±0.5dBi Impedance(Ω) 50±10 ReTurnLoss(dB) ≤ -10 VSWR ≤1.92 AdmittedPower1W PolarizationLinearVertical ConnectorTypeIPEX PhysicalProperties AntennaBaseCopper OperatingTemp -20°C-+60°C StorageTemp -20°C-+70°C Listofrawmaterials： Serial mumber NameTextureQuantityUnitRemark 1CopperpipeCopper(H65)1PCS 2Wirerod1.13Gray1PCS ShenZhenXinErSheng（SuFei）TechnologyCo.,Ltd Productdrawing ShenZhenXinErShengTechnologyCo.,Ltd Networkanalyzertestreport： 1.SWR： 2.returnloss ShenZhenXinErShengTechnologyCo.,Ltd 2D、3DRaditationPattern 2.4GGain(Peak):3.11dBiEfficiency:61.9% 2.45GGain(Peak):2.94dBiEfficiency:57.4% 2.5GGain(Peak):2.91dBiEfficiency:56.8%

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 1 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 RF Test Data for 2.4G WiFi (Conducted Measurements) General Description of EUT Product Name: 2.4GHz Digital Wireless Video Baby Monitor Test Model: HB6081 Sample ID: 202303-0036-11-2# Environmental Conditions Temperature: 24°C Relative Humidity: 50% Test Voltage: DC 5V Test Engineer: huangjianping Note: For a more detailed features description, please refer to the report TBR-C-202303-0036-18. The report only show the worst case data. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 99.76 0.01 0.12 NVNT b 2437 Ant1 99.88 0.01 0.06 NVNT b 2462 Ant1 99.88 0.01 0.06 NVNT g 2412 Ant1 98.58 0.06 0.72 NVNT g 2437 Ant1 98.58 0.06 0.72 NVNT g 2462 Ant1 98.58 0.06 0.72 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 2 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Test Graphs Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 3 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 4 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 5 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 17.301 30 Pass NVNT b 2437 Ant1 17.162 30 Pass NVNT b 2462 Ant1 17.085 30 Pass NVNT g 2412 Ant1 13.836 30 Pass NVNT g 2437 Ant1 13.295 30 Pass NVNT g 2462 Ant1 13.178 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 6 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 Ant1 10.06 0.5 Pass NVNT b 2437 Ant1 10 0.5 Pass NVNT b 2462 Ant1 10.06 0.5 Pass NVNT g 2412 Ant1 16.34 0.5 Pass NVNT g 2437 Ant1 16.34 0.5 Pass NVNT g 2462 Ant1 16.34 0.5 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 7 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Test Graphs -6dB Bandwidth NVNT b 2412MHz Ant1 -6dB Bandwidth NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 8 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 -6dB Bandwidth NVNT b 2462MHz Ant1 -6dB Bandwidth NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 9 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 -6dB Bandwidth NVNT g 2437MHz Ant1 -6dB Bandwidth NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 10 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT b 2412 Ant1 15.266 NVNT b 2437 Ant1 15.382 NVNT b 2462 Ant1 15.356 NVNT g 2412 Ant1 17.024 NVNT g 2437 Ant1 16.685 NVNT g 2462 Ant1 16.692 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 11 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Test Graphs OBW NVNT b 2412MHz Ant1 OBW NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 12 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 OBW NVNT b 2462MHz Ant1 OBW NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 13 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 OBW NVNT g 2437MHz Ant1 OBW NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0036-18 Page: 14 of 34 FCC ID: 2AF2R-81RX TB-RF-074-1.0 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Max PSD (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 -8.601 8 Pass NVNT b 2437 Ant1 -9.297 8 Pass NVNT b 2462 Ant1 -9.344 8 Pass NVNT g 2412 Ant1 -10.204 8 Pass NVNT g 2437 Ant1 -12.771 8 Pass NVNT g 2462 Ant1 -13.112 8 Pass Shenzhen Toby Technology Co., Ltd. Http://w…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202303-0036-18 Page: 1 of 38 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2AF2R-81RX Report No. : TBR-C-202303-0036-18 Applicant : Shenzhen Videotimes Technology Co.,Ltd Equipment Under Test (EUT) EUT Name : 2.4GHz Digital Wireless Video Baby Monitor Model No. : HB6081 Series Model No. : BBM818, BBM818-2, BBM818RX, HB6081-2, HB6081RX, VT510, VT510-2, VT510RX, FK8160, FK8160-2, FK8160RX, JA2302, JA2302-2, JA2302RX, BG1055, BG1055-2, BG1055RX, VV6010, VV6010-2, VV6010RX, BL9055, BL9055-2, BL9055RX Brand Name : ---- Sample ID : 202303-0036-11-1# & 202303-0036-11-2# Receipt Date : 2023-03-13 Test Date : 2023-03-13 to 2023-04-10 Issue Date : 2023-04-14 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Seven Wu Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202303-0036-18 Page: 2 of 38 TB-RF-075-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 6 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT .................................................................................................................. 11 5. CONDUCTED EMISSION TEST ........................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data .............................................................................................................…

Text truncated - open the document above for the full version.