2AF69S805PTV BOX

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Golden Sunshine Technology CO.,LTD 2015/09/29 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Golden Sunshine Technology CO.,LTD, hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product description: TV BOX model name: S805P series number: S805 FCC ID: 2AF69S805P Sincerely, Client’s signature Client’s name / title : Jack Kuang Contact information / address: 8th Floor,VIA Building,9966 shennan road,Nanshan District,Shenzhen, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Golden Sunshine Technology CO.,LTD 2015/09/29 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AF69S805P We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Jack Kuang / Manager Contact information / address: 8th Floor,VIA Building,9966 shennan road,Nanshan District, Shenzhen,China

Golden Sunshine Technology CO.,LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2015-09-30 SUBJECT: FCC Application for (FCC ID: 2AF69S805P) To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. We understand that devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm Select the "accredited" option to search for FCC recognized accredited test firms. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. Regards, Signatory Client’s name / title : Jack Kuang / Manager Contact information / address: 8th Floor, VIA Technology Building, 9966 shennan Road, Nanshan District, ShenZhen, Guangdong, China

Golden Sunshine Technology CO.,LTD Model Difference FCC ID: 2AF69S805P Model : S805P, S805 All the models are the same circuit and RF module, except the mode names. Sincerely, Client’s signature Signature Client’s name / title : Jack Kuang Contact information / address: 8th Floor, VIA Technology Building, 9966 shennan Road, Nanshan District, ShenZhen, Guangdong, China

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS

TV BOX FCCID: 2AF69S805P Model: S805P Shenzhen golden sunshine Branch Co. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS BT& WIFI Antenna BT& WIFI Antenna

DongGuan Precise Testing Service Co., Ltd. Report No.: PT1508288127F1 Page1 of 28 FCC RADIO TEST REPORT FCC ID: 2AF69S805P Product Name: TV BOX Trademark: N/A Model Name : S805P, S805 Prepared For : Golden Sunshine Technology CO.,LTD Address : 8th Floor ,VIA Building ,9966 shennan road, Nanshan District,Shenzhen,China Prepared By : DongGuan Precise Testing Service Co., Ltd. Address : Building D, Baoding Technology Park, Guangming Road 2, Guangming Community, Dongcheng District, Dongguan, Guangdong, China Test Date: Sep.20, 2015 ~Sep.28, 2015 Date of Report : Sep.28, 2015 Report No.: PT1508288127F1 DongGuan Precise Testing Service Co., Ltd. Report No.: PT1508288127F1 Page2 of 28 TEST RESULT CERTIFICATION Applicant’s name.............: Golden Sunshine Technology CO.,LTD Address ..............................: 8th Floor ,VIA Building ,9966 shennan road, Nanshan District,Shenzhen,China Manufacture's Name........: Chiptrip technology Co., Ltd. Address ..............................: 2nd Floor,NO 7,Chun Hui Logistics Park Building B， Port channel Road,Bao'an District,shenzhen Product description Product name .......................... : TV BOX Model and/or type reference ...........................................: S805P Serial Model ............................ : S805 Standards.........................: FCC Part15.249 Test procedure............................. ANSI C63.10-2013 This device described above has been tested by PTS, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTS, this document may be altered or revised by PTS, personal only, and shall be noted in the revision of the document. Testing Engineer : (Juan Zeng) Technical Manager : (Tom Zhang) Authorized Signatory : (Chris Du) DongGuan Precise Testing Service Co., Ltd. Report No.: PT1508288127F1 Page 3 of 28 TABLE OF CONTENTS 2 TEST SUMMARY 4 3 GENERAL INFORMATION 5 3.1 GENERAL DESCRIPTION OF E.U.T. 5 3.2 DETAILS OF E.U.T. 5 3.3 CHANNEL LIST 5 3.4 DESCRIPTION OF SUPPORT UNITS 5 3.5 TEST FACILITY 6 3.6 MEASUREMENT UNCERTAINTY 6 4 EQUIPMENT USED DURING TEST 7 4.1 EQUIPMENTS LIST 7 4.2 MEASUREMENT UNCERTAINTY 8 4.3 TEST EQUIPMENT CALIBRATION 8 5 CONDUCTED EMISSION 9 5.1 E.U.T. OPERATION 9 5.2 EUT SETUP 9 5.3 CONDUCTED EMISSION TEST RESULT 10 6 SPURIOUS RADIATED EMISSIONS 12 6.1 EUT OPERATION : 12 6.2 TEST SETUP 13 6.3 SPECTRUM ANALYZER SETUP 14 6.4 TEST PROCEDURE 15 6.5 CORRECTED AMPLITUDE & MARGIN CALCULATION 15 6.6 SUMMARY OF TEST RESULTS 15 7 BAND EDGE MEASUREMENT 21 7.1 TEST PROCEDURE 21 7.2 TEST RESULT: 21 8 20 DB BANDWIDTH MEASUREMENT 23 8.1 TEST PROCEDURE: 23 8.2 TEST RESULT: 23 9 ANTENNA REQUIREMENT 26 10 EUT TEST PHOTO 27 DongGuan Precise Testing Service Co., Ltd. Report No.: PT1508288127F1 Page 4 of 28 2 Test Summary Test Items Test Requirement Result Spurious Radiated Emissions 15.205(a) 15.209 15.249(d) PASS Band edge Emissions 15.249(d) PASS Conducted Emissions 15.207 PASS 20dB Bandwidth 15.215c 15.249 PASS DongGuan Precise Testing Service Co., Ltd. Report No.: PT1508288127F1 Page 5 of 28 3 General Information 3.1 General Description of E.U.T. Product Name : TV BOX Model No. : S805P Serial Model : S805 Model Difference : All the models are the same circuit and RF module, except for the model names. Brand Name : N/A Operation Frequency : 2402MHz ~ 2480MHz,79 channels in total, separated by 1MHz Type of Modulation : GFSK, Pi/4DQPSK, 8DPSK Antenna installation : Internal antenna Antenna Gain : 1.25 dBi Bluetooth version : 3.0+EDR 3.2 Details of E.U.T. Technical Data : DC 5V from adapter Model: CYZ-080 5V2A; I/P: AC 100-240V 50/60Hz; O/P:DC 5V/2A 3.3 Channel List Channel No. Frequency (MHz) Channel No. Frequency (MHz) Channel No. Frequency (MHz) Channel No. Frequency (MHz) 1 2402 2 2403 3 2404 4 2405 5 2406 6 2407 7 2408 8 2409 9 2410 10 2411 11 2412 12 2413 13 2414 14 2415 15 2416 16 2417 17 2418 18 2419 19 2420 20 2421 21 2422 22 2423 23 2424 24 2425 25 2426 26 2427 27 2428 28 2429 29 2430 30 2431 31 2432 32 2433 33 2434 34 2435 35 2436 36 2437 37 2438 38 2439 39 2440 40 2441 41 2442 42 2443 43 2444 44 2445 45 2446 46 2447 47 2448 48 2449 49 2450 50 2451 51 2452 52 2453 53 2454 54 2455 55 2456 56 2457 57 2458 58 2459 59 2460 60 2461 61 2462 62 2463 63 2464 64 2465 65 2466 66 2467 67 2468 68 2469 69 2470 70 2471 71 2472 72 2473 73 2474 74 2475 75 2476 76 2477 77 2478 78 2479 79 2480 - - 3.4 Description of Support Units No. Equipment Manufacturer Model No. Serial No. 1. N/A N/A N/A N/A DongGuan Precise Testing Service Co., Ltd. Report No.: 1508288127F1 Page 6 of 28 3.5 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. For Conducted & Radiated Emission Final Test Mode Description Mode 1 CH01 Mode 2 CH40 Mode 3 CH79 Mode 4 Link Mode Note: (1) The measurements are performed at the highest, middle, lowest available channels. (2) Fully-charged battery is used during the test 3.6 TEST FACILITY Dongguan Precise Testing Service Co., Ltd. Address: Building D, Baoding Technology Park, Guangming Road 2, Dongcheng District, Dongguan, Guangdong, China ☆ CNAS Registration No.: CNAS L5772 ☆ FCC Registration No.: 371540 ☆ IC Registration No.: 12191A-1 3.7 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB…

Text truncated - open the document above for the full version.

` Radiated Measurement Photos (Below 1GHz) Radiated Measurement Photos(Above 1GHz) Conducted Measurement Photos