2AF76-MX1914LED lantern with remote control

300 lumen LED Lantern With Remote Control User Manual Model：MX1914 300 lumen LED Lantern With Remote Control Sw itch Operation: Remote control Features: Operation indicator light • Dual color LED's (twenty white LED's and four amber LED's) switch • Rugged housing is IPX4 weather-resistant • Glow in the dark handle, body ring and switch • 4 light modes: white high, white low, amber high and amber low Mode change button • Battery capacity indication • Manual or radio remote control operation • Remote distance up to 35 feet • Built-in recessed hook at lantern base for hanging as downlight Manual control: • Powered by three "D" size batteries(not included) • Turn operation switch to left(LED bub icon) to st • Output 300 lumens with 48-300 hours run time Battery Installation: Remote control: •(1) CR2032 batteries - 3V • To install theA24:A33 batteries, open the battery cover. • Install one CR2032 battery with the positive + side facing up. Lantern: • (3) D size batteries • To install the batteries, open the battery cover. • Install three "D" size batteries in proper polarity. • Improper installation of the batteries will damage the light. • Reinstall the battery cover. To protect the environment, please recycle the batteries. For more information about battery re cycling, please go to: www.batteryrecycling.com WARNING: Never mix fresh and used batteries. Never mix different battery brands or chemistry types. Always remove drained batteries immediately. Remove batteries during long periods of storage. Recessing Hook: The lantern built-in recessed hook at lantern base for hanging as downlight. ar t the manual control. Light will turn into white high mode. Change lighting modes (white high, white low, amber high, amber low) by pressing and releasing the mode change button. • Turn off the light by pressing the mode change button for 5s or turn operation switch to lock mode. Remote control: • Turn operation switch to right(Remote icon) to start the remote control. Remote control indicator light will turn to blue. Change lighting modes (white high, white low, amber high, amber low) by pressing and releasing the mode change button on the remote control. • Turn off the light by pressing the mode change button on the remote control for 5s or turn operation switch to lock mode. • The remote control built-in two white LED lights, press the power switch to turn on the light, release the power switch to turn off. It is suggested to turn the operation switch to lock position after you turn off your lantern and during transportation. Tr oubleshooting: If the lantern fails to light: • Check the batteries for proper installation. • If proper installation is confirmed replace batteries. FCC NOTE This device complies with Part 15 of the FCC Rules. Operation is sub j ect to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Item No.: MX1914 Made in China The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment.

Max Lux Corporation Limited FCC ID: 2AF76-MX1914 POWER OF ATTORNEY Date: Oct. 16, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Oct. 15, 2016. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Max Lux Corporation Limited are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Max Lux Corporation Limited ................................................................................. Signature Max Chui /Director ................................................................................. Typed name and Title

Max Lux Corporation Limited Da te : Oct. 16, 2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AF76-MX1914. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description SCH.pdf BlockDiagram.pdf CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ................................................ Signature Max Chui /Director ................................................ Typed name and Title Max Lux Corporation Limited

Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 13 Photographs - Constructional Details 13.1 Model MX1914 - External View Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn

MX1914 Label Sample and Location FCC ID: 2AF76‐MX1914 This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 13.2 Model MX1914 - Internal View ANT. Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn

TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 23 Reference No. .................... : WTS15S0628472E FCC ID ................................ : 2AF76-MX1914 Applicant ............................ : Max Lux Corporation Limited Address .............................. : Unit 08, 17/F, Trendy Centre, Lai Chi Kok, Kowloon, Hong Kong Manufacturer .................... : Tong wan Plastic products company Ltd Address .............................. : No.1 zhenxing Road wulian village fenggang town dongguan city, China Product Name .................... : LED lantern with remote control Model No. ........................... : MX1914 Standards........................... : FCC CFR47 Part 15 Section 15.249: 2014 Date of Receipt sample .... : Jun.18, 2015 Date of Test ....................... : Jun.18, 2015 ~ Jul.06, 2015 Date of Issue ...................... : Jul.07, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Test Engineer Philo Zhong / Manager Reference No.: WTS15S0628472E Page 2 of 23 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Conducted Emissions 15.207 N/A Radiated Emission 15.249(a) 15.209 15.205(a) PASS Periodic Operation 15.35(c) PASS Outside of Band Emission 15.249 15.205 15.209 PASS 20dB Bandwidth 15:215(c) PASS Antenna Requirement 15.203 PASS Reference No.: WTS15S0628472E Page 3 of 23 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 TEST SUMMARY .................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 4 4.2 DETAILS OF E.U.T. ..................................................................................................................................... 4 4.3 CHANNEL LIST ............................................................................................................................................ 4 4.4 TEST FACILITY ............................................................................................................................................ 4 5 EQUIPMENT USED DURING TEST .................................................................................................................. 5 5.1 EQUIPMENTS LIST ...................................................................................................................................... 5 5.2 MEASUREMENT UNCERTAINTY ................................................................................................................... 5 5.3 TEST EQUIPMENT CALIBRATION ................................................................................................................ 5 6 CONDUCTED EMISSION .................................................................................................................................... 6 7 RADIATION EMISSION TEST ............................................................................................................................ 7 7.1 EUT OPERATION ........................................................................................................................................ 7 7.2 TEST SETUP ............................................................................................................................................... 8 7.3 SPECTRUM ANALYZER SETUP ................................................................................................................... 9 7.4 TEST PROCEDURE .................................................................................................................................... 10 7.5 TEST RESULT ........................................................................................................................................... 11 8 PERIODIC OPERATION .................................................................................................................................... 12 9 OUTSIDE OF BAND EMISSION ....................................................................................................................... 13 9.1 TEST PROCEDURE .................................................................................................................................... 13 9.2 TEST RESULT ........................................................................................................................................... 13 10 20 DB BANDWIDTH MEASUREMENT ........................................................................................................... 14 10.1 TEST PROCEDURE .................................................................................................................................... 14 10.2 TEST RESULT ....................................................................................…

Text truncated - open the document above for the full version.

Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 12 Photographs- Model MX1914 Test Setup 12.1 Radiation Emission Test frequency below 30MHz at test site 2# Tes t frequency from 30MHz to 1GHz at test site 2# Reference No.: WTS15S0628472E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Test frequency above 1GHz at test site 1#