2AF8C-T373BOBDII GPS Tracker

3G WCDMA Bluetooth OBD GPS Tracker T373A & T373B User Manual CE 2200 http://www.ulbotech.com [email protected] T373A & T373B User Manual Attention! 1. Do not disassemble the device. When the device fails, shall the manufacture or the authorized specialist repair, self disassemble the device maintenance will be lost. 2. The device must be installed by the specialist, otherwise may affect the using effect. 3. The device is susceptible to water and humidity, need to install and use in a dry environment. 4. The device belonging to the wireless communication equipment, generates ,uses and radiate radio frequency energy, may cause interference to the nearby equipments. 5. The device cannot be disposed with other household waste when it reaches end of using life. To avoid harmful the environment or human health caused by failing to properly control the waste, please separately process this device with other waste and recycling properly, to promote resource recycling. ---2--- T373A & T373B User Manual Document Title T373A & T373B User Manual Version 1.003 Date 2015-06-20 Status Release General Notes Ulbotech offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Ulbotech. The information provided is based upon requirements specifically provided to Ulbotech by the customers. Ulbotech has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Ulbotech within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Ulbotech copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Ulbotech 2015 ---3--- T373A & T373B User Manual Contents 0.Revision History ........................................................................................... 5 1.Introduction ................................................................................................ 6 2.Product Overview ........................................................................................ 7 3.Getting Started .......................................................................................... 11 4.Installation USB Driver ............................................................................... 13 5.Initiation Device ........................................................................................ 13 6.Connect with Immobilizer and Input ............................................................ 23 7.Installation Device ..................................................................................... 24 8.Common Problems ..................................................................................... 25 ---4--- T373A & T373B User Manual 0.Revision History Revision Date Author Description of change 1.000 2014-10-05 David Lin Initial 1.001 2014-10-20 David Lin Add SAE J1939 function 1.002 2015-04-12 David Lin Add multi-function input 1.003 2015-06-20 David Lin ---5--- T373A & T373B User Manual 1.Introduction Ulbotech's T373 A&B are the latest OBDII GPS Tracker supporting 3G WCDMA and Bluetooth 4.0 low energy, it's built-in Telit xE910 family cell module which provided b y the most professional M2M wireless solutions product service in the world -Telit, which can support from 2G to 4G including GSM/WCDMA/CDMA global network coverage, there's not regional restrictions for product application. The T373 A&B also with internal u-blox MAX-7 GNSS module to support GPS and GLONASS, with the 25mm*25mm high gain active antenna and the Assist Now AGPS function to ensure the device can fast time positioning even so the T373 A&B is installed in the most hidden place of the vehicle. It's built-in On-board Diagnostics(OBD II)/SAE J1939 function can obtain the on-board data such as RPM, SPD, ECT, Fuel level and Fuel consumption etc from the vehicle in real-time. It's in-time monitoring of Diagnostic Trouble Code(DTC), OBDII parameter and alarm. It's equipped with 3D acceleration enable to set in real-time detection of the motion and the 8 type of driving behavior, able to make an effective analysis for the bad driving behavior of the driver and the fuel consumption, including to provide the improvement suggestions. It's Bluetooth 4.0 energy enable easily connected various compatible Bluetooth m obile devices to achieve extended functionality, like as iOS, Android... The T373 A&B is used a wide variety of Fleet Management, Insurance & rental, Roadside Assistance, Driver Behavior Monitoring, Safety & Security etc. 1.1 Reference document Index Document Name 1 Ulbotech Tracking Device Communication Protocol 2 Tracking Device VCP driver installation user manual 3 Tracking Device Configuration Software manual 4 Tracking Device File Import & Export Software manual 5 Ulbotech OBDII Extended cable connection chart ---6--- T373A & T373B User Manual 2.Product Overview 2.1 Description T373A & T373B is based on the OBD II interface GPS vehicle tracking device, compact design and easy to install. T373A & T373B contains an OBD II connector which complies with J1962 standard. It comprises a micro USB connector, a built- in 3G/WCDMA/GSM antenna, an internal Bluetooth antenna, an internal GPS antenna, a multi-functions input, an immobilizer output and 4pcs LEDs . 2.2 Features  OBD connectivity, simple to install, easy to use.  Supports all OBDII protocols and SAE J1939(250/500kbau…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Ulbo Tech Co., Limited 2015-10-23 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Ulbo Tech Co., Limited _____hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (OBDII GPS Tracker: T360, T361, T363A, T363B, T370, T371, T373A, T373B) FCC ID: 2AF8C-T373B Sincerely, Client’s signature Client’s name / title Echo Wang/Maketing Manager Contact information / address Room 601, Building 3 Zone2 No.11 Kuiqi First Road Chan Cheng District Foshan, Guangdong China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Ulbo Tech Co., Limited 2015-10-23 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AF8C-T373B We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description - Turn up procedure - BOM List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title Echo Wang/Maketing Manager Contact information / address Room 601, Building 3 Zone2 No.11 Kuiqi First Road Chan Cheng District Foshan, Guangdong China

Ulbo Tech Co., Limited Model Declaration Letter For FCC ID : 2AF8C-T373B We, the undersigning company Company Name: Ulbo Tech Co., Limited Address: Room 601, Building 3 Zone2 No.11 Kuiqi First Road Chan Cheng District Foshan, Guangdong China Hereby confirm that the following products: Product description: OBDII GPS Tracker Type designation: T360, T361, T363A, T363B, T370, T371, T373A, T373B, Trade name or Brand(s): Ulbo Tech Co., Limited That All these models are identical in the same PCB, layout and electrical circuit, the only difference is model name for commercial. City and Country: Date: Name: Function: Signature: Foshan, China 23/10/2015 Echo Wang Marketing Manager

Report No.: TB-FCC145507 Page: 3 of 11 TB-RF-075-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Report No.: TB-FCC145507 Page: 4 of 11 TB-RF-075-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT Report No.: TB-FCC145507 Page: 5 of 11 TB-RF-075-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT

Report No.: TB-FCC145507 Page: 1 of 11 TB-RF-074-1.0 Appendix IFCC ID Label FCC ID : 2AF8C-T373B OBDII GPS Tracker Ulbo Tech Co., Limited This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Model: T373B

Report No.: TB-FCC145507 Page: 2 of 11 TB-RF-075-1.0 Appendix II ID Label Location ID LOCATION

Report No.: TB-FCC145507 Page: 5 of 11 TB-RF-075-1.0 Appendix IV EUT Internal Photographs Photo 5 Internal of EUT Photo 6 Internal of EUT Report No.: TB-FCC145507 Page: 6 of 11 TB-RF-075-1.0 Photo 7 Internal of EUT Photo 8 Appearance of PCB GSM&WCDMA FPC Antenna Report No.: TB-FCC145507 Page: 7 of 11 TB-RF-075-1.0 Photo 9 Appearance of PCB Photo 10 Appearance of PCB Report No.: TB-FCC145507 Page: 8 of 11 TB-RF-075-1.0 Photo 11 Appearance of PCB Photo 12 Appearance of PCB 2.4G PCB Antenna GPS Antenna Report No.: TB-FCC145507 Page: 9 of 11 TB-RF-075-1.0 Photo 13 Appearance of PCB Photo 14 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE145509 Page: 1 of 4 TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2AF8C-T373B 1. Client Information Applicant : Ulbo Tech Co., Limited Address : Room 601, Building 3 Zone2 No.11 Kuiqi First Road Chan Cheng District Foshan, Guangdong China Manufacturer : Ulbo Tech Co., Limited Address : Room 601, Building 3 Zone2 No.11 Kuiqi First Road Chan Cheng District Foshan, Guangdong China 2. General Description of EUT EUT Name : OBDII GPS Tracker Models No. : T360, T361, T363A, T363B, T370, T371, T373A, T373B Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is model name for commercial. Product Description : Operation Frequency: Bluetooth 4.0 (BLE): 2402MHz~2480MHz GSM 850: 824.20MHz-848.80MHz PCS1900: 1850.20MHz-1909.80MHz UMTS Band II: 1852.40MHz-1907.60MHz UMTS Band V:826.40MHz-846.60MHz Output Power: BLE: -1.586 dBm GSM 850: Cond:32.35 dBm ERP:31.54 dBm PCS 1900: Cond:29.42 dBm EIRP:25.89 dBm UMTS Band II: Cond:22.35 dBm EIRP:18.05 dBm UMTS Band V: Cond:23.15 dBm ERP:18.57 dBm Antenna Gain: See the page of 3 Modulation Type: BLE: GFSK GSM/GPRS:GMSK EDGE: 8PSK UMTS:QPSK Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE145509 Page: 2 of 4 TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 Power Supply : DC power by Li-ion battery. Power Rating : DC 3.7V by Li-ion Battery. DC 12V/2A by DC Battery. Connecting I/O Port(S) : Please refer to the User's Manual Note:More detail information about Equipment, please refer to User’s manual, more information about the RF，please refer to test report. Report No.: TB-MPE145509 Page: 3 of 4 TB-RF-075-1.0 MPE Calculations for WIFI 1. Antenna Gain: Ant. Brand Model Name Antenna TypeGain (dBi) 1 N/A N/A PCB Ant. 2.4G 0.46 2 N/A N/A FPC Ant. GSM 850 -1.2 DCS 1900 0.72 WCDMA Band V -1.2 WCDMA Band II 0.72 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Mode N TX Power(max) (dBm) [P] ANT Gain (dBi) [G] Turn-up Power Tolerance (dB) Distance (cm) [R] Power Density (mW/ cm 2 ) [S] BLE 1 -2 0.46 ±1 20 0.000175 GSM 850 1 32 -1.2 ±1 20 0.301122 PCS 1900 1 29 0.72 ±1 20 0.234824 UMTS Band II 1 23 0.72 ±1 20 0.058985 UMTS Band V 1 22 -1.2 ±1 20 0.030112 Note: (1) N TX = Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TB-MPE145509 Page: 4 of 4 TB-RF-075-1.0 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For : Bluetooth 4.0 (BLE): 2402MHz~2480MHz PCS1900: 1850.20MHz-1909.80MHz UMTS Band II: 1852.40MHz-1907.60MHz MPE limit S: 1 mW/ cm 2 The MPE is calculated as 0.234824mW / cm 2 < limit 1 mW / cm 2 . For : GSM 850: 824.20MHz-848.80MHz UMTS Band V:826.40MHz-846.60MHz MPE limit S: 0.55 mW/ cm 2 The MPE is calculated as 0.301122mW / cm 2 < limit 0.55 mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report.

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC145508 Page: 1 of 92 TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: 2AF8C-T373B Original Grant Report No. : TB-FCC145508 Applicant : Ulbo Tech Co., Limited Equipment Under Test (EUT) EUT Name : OBDII GPS Tracker Model No. : T373B Series No. : T360, T361, T363A, T363B, T370, T371, T373A Brand Name : Ulbo Tech Co., Limited Receipt Date : 2015-09-21 Test Date : 2015-09-21 to 2015-10-21 Issue Date : 2015-10-22 Standards : FCC Part 2 FCC Part 22 Subpart H, FCC Part 24 Subpart E, 2014 ANSI/TIAC603D: 2010 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC requirements Test/Witness Engineer : Approved& Authorized : This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC145508 Page: 2 of 92 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 4 1.1 Client Information ................................................................................................................. 4 1.2 General Description of EUT (Equipment Under Test) ................................................... 4 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 5 1.4 Description of Support Units .............................................................................................. 5 1.5 Description of Test Mode .................................................................................................... 5 1.6 Measurement Uncertainty .................................................................................................. 7 1.7 Test Facility ........................................................................................................................... 7 2. TEST SUMMARY ....................................................................................................................... 8 3. TEST EQUIPMENT .................................................................................................................... 9 4. FREQUENCY STABILITY ...................................................................................................... 10 4.1 Test Standard and Requirement ..................................................................................... 10 4.2 Test Setup ........................................................................................................................... 10 4.3 Test Procedure ................................................................................................................... 11 4.4 EUT Operating Condition ................................................................................................. 11 5. CONDUCTED RF OUTPUT POWER ................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 EUT Operating Condition ................................................................................................. 15 5.5 EUT Operating Condition ................................................................................................. 15 6. PEAK-AVERAGE RATIO ....................................................................................................... 20 6.1 Test Standard and Limit .................................................................................................... 20 6.2 Test Setup ........................................................................................................................... 20 6.3 Test Procedure ................................................................................................................... 20 6.4 EUT Operating Condition ................................................................................................. 20 6.5 Test Data ............................................................................................................................. 21 7. RADIATED OUTPUT POWER .............................................................................................. 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 22 7.4 EUT Operating Condition ................................................................................................. 23 7.5 Test Data ............................................................................................................................. 23 8. OCCUPIED BANDWIDTH ...................................................................................................... 27 8.1 Test Standard and Limit ....................................................................…

Text truncated - open the document above for the full version.

Report No.: TB-FCC145507 Page: 11 of 11 TB-RF-075-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Below 1 GHz)