2AFG8BT400Wireless Snapshot

Wireless Snapshot User Manual Photo sans fil Drahtloser Snapshot Acquisizione wireless Instantánea inalámbrica Fotografias sem fio 蓝牙自拍遥控器 무선 스냅샷 وحدة التقاط الصور اللاسلكیة K01-1111006-00 For the complete user manual, visit: Pour le manuel d'utilisation complet, visitez Ein vollständige Benutzerhandbuch finden Sie auf: Per consultare il manuale utente completo, visitare Para consultar el manual de usuario completo, vaya a: Para consultar o manual de usuário completo, visite 查看完整的用户手册，请访问: 詳しいマニュアルは、下記にて： www.cliquefie.com دلیل المستخدم الكامل، زیارة Compatibility: iOS 7.0 or Later Wireless Snapshot User Manual Bluetooth range: up to 10 M. App-Free: No extra App needed. Connect via Bluetooth 4.2 EN 1 On your phone, go to Settings Bluetooth. Turn on Bluetooth. Hold the CliqueFie remote button (about 3 seconds) until the LED light blinks. The blinking LED means it is in Discoverable mode. 1. 2.When iPhone detects CliqueFie, tap “CliqueFie” to connect the device. 2 SettingsBluetooth Bluetooth MY DEVICES OTHER DEVICES Button Light Settings Bluetooth Bluetooth MY DEVICES OTHER DEVICES CliqueFie Then a message will pop-up, please tap “Pair” to allow CliqueFie to connect with your device. When “CliqueFie” shows Connected under My Device, you are successfully connected to CliqueFie. Now you can turn on the camera and have fun with CliqueFie Wireless Snapshot. Settings Bluetooth MY DEVICES CliqueFie Connected Bluetooth EN 3 1. If the phone cannot search for nearby Bluetooth devices, please try more than one time or remove the battery and try again. 2. When you are finished, please turn off the Bluetooth. If you are not planning on using it for a length of time, please remove the battery. 3. Make sure your Volume key is in Shutter mode. 4. Please avoid using more than two CliqueFie devices at the same time. 5. If you still cannot connect the CliqueFie remote, please try to turn off the phone and turn it on again to re-connect. Due to different brands and phones, if you have any further questions or problems, please contact CliqueFie Customer Support. Notification: 4 No extra App needed: Connect via Bluetooth range: up to 10 M. Support for Android Verision 6.0 or Later 1.Button 3.Hole 2.Light 4.Batter y cover user manual Wi r el ess Snapshot Android 1 2 3 4 Bluetooth 4.2 EN 5 Hold the CliqueFie remote button (about 3 seconds) until the LED light blinks. The LED blinking means is in Discoverable mode. When “CliqueFie” shows on the Available Devices, tap it to connect. 2. On your phone, go to Settings Bluetooth, then turn on Bluetooth. 1. Bluetooth On Paired Devices CliqueFie 1 2 Bluetooth On Available Devices 6 Pairing the CliqueFie Bluetooth Remot e wit h Your Mobile Phone When the text “Cliquefie” moves to Paired Devices, then you are all set. If not, please repeat the previous steps. 3. CliqueFie Paired Devices Bluetooth On Available Devices Now, you can turn on your camera and enjoy CliqueFie. *Some devices might need to switch camera settings to allow the remote to work. Please go to Camera Settings Use Volume key as Shutter 4. 1 Use Volume key as Grid lines Sound Zoom Volume Shutter 2 3 EN 7 1. If the phone cannot search for nearby Bluetooth devices, please try more than one time or remove the battery and try again. 2. When you are finished, please turn off the Bluetooth. If you are not planning on using it for a length of time, please remove the battery. 3. Make sure your Volume key is in Shutter mode. 4. Please avoid using more than two CliqueFie devices at the same time. 5. If you still cannot connect the CliqueFie remote, please try to turn off the phone and turn it on again to re-connect. Due to different brands and phones, if you have any further questions or problems, please contact CliqueFie Customer Support. Notification: 8 Compatibilité : iOS 7.0 ou supérieur Photo sans fil Mode d’emploi Portée Bluetooth : jusqu’à 10 M. Sans appli : Aucune application supplémentaire n'est nécessaire. Connecter via Bluetooth 4.2 FR 9 Sur votre téléphone, allez dans Réglages Bluetooth. Activez Bluetooth. Maintenez le bouton de la télécommande CliqueFie (environ 3 secondes) jusqu'à ce que le voyant LED clignote. La LED clignotante indique qu’il est en mode Découverte. 1. Lorsque l’iPhone détecte CliqueFie, appuyez sur “CliqueFie” pour connecter l’appareil. 2. Réglages Bluetooth Bluetooth MES APPAREILS AUTRES APPAREILS CliqueFie 10 RéglagesBluetooth Bluetooth MES APPAREILS AUTRES APPAREILS Bouton Voyant Un message apparaît ensuite, appuyez sur "Appairer" pour permettre à CliqueFie de se connecter à votre appareil. Lorsque "CliqueFie" s'affiche Connecté sous Mon appareil, vous êtes connecté à CliqueFie avec succès. Vous pouvez maintenant allumer la caméra et vous amuser avec ClickFie Wireless Snapshot. Réglages Bluetooth MES APPAREILS CliqueFie Connecté Bluetooth FR 11 1. Si le téléphone ne peut pas rechercher les périphériques Bluetooth proches, essayez plusieurs fois ou retirez la batterie et réessayez. 2. Lorsque vous avez terminé, veuillez désactivez le Bluetooth. Si vous prévoyez de ne pas l’utiliser pendant un certain temps, veuillez retirez la batterie. 3. Assurez-vous que votre touche Volume est en mode Déclencheur. 4. Veuillez évitez d'utiliser plus de deux appareils CliqueFie en même temps. 5. Si vous ne parvenez toujours pas à connecter la télécommande CliqueFie, veuillez éteindre le téléphone et le rallumer pour connecter à nouveau. En raison des différentes marques et téléphones, en cas de questions ou de problèmes autres, veuillez contactez le service d’assistance client de CliqueFie. Notification : 12 Portée Bluetooth : jusqu’à 10 M. 1. Bouton 3. Orifice 2. Voyant 4. Couvercle de la pile Mode d’emploi Photo sans fil Android 1 2 3 4 FR 13 Aucune application supplémentaire n'est nécessaire : Connexion via Bluetooth 4.2 Prise en charge pour Android version 6.0 ou ultérieure Maintenez le bouton de la télécommande CliqueFie (environ 3 secondes) jusqu'à ce que le voyant LED clignote. La LED clign…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2280566-AW 1 / 3 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2280566-AW 2 / 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ2280566-AW 3 / 3 TOP VIEW OF EUT BOTTOM VIEW OF EUT

MODEL:BT-400 FCC ID: 2AFG8BT400 CAN ICES-3B/NMB-3B IC: 11470A-BT400

Report No.: BL-SZ2280566-AI 1 / 2 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 MAIN BOARD TOP VIEW PCB Antenna RF Chip Report No.: BL-SZ2280566-AI 2 / 2 MAIN BOARD REAR VIEW

Report No.: BL-SZ2280566-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Cyber Power Systems, Inc Address: 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan Equipment Type: Wireless Snapshot Model Name: BT-400 Brand Name: CliqueFie FCC ID: 2AFG8BT400 Test Standard: 47 CFR Part 2.1093 KDB 447498 D04 v01 Test Date: Aug. 26, 2022 - Sep. 02, 2022 Date of Issue: Oct. 19, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie zhu Checked by: Xiong Lining Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2280566-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Sep. 29, 2022 Initial Issue Rev. 02 Oct. 19, 2022 Updated the EUT Name; Updated antenna gain and related data TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 4 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Turn-up power ................................................................................................................ 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion ...................................................................................................................... 9 Report No.: BL-SZ2280566-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2280566-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Cyber Power Systems, Inc Address 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan 2.2 Manufacturer Information Manufacturer Cyber Power Systems, Inc Address 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan 2.3 Factory Information Factory Cyber Power (Shen Zhen) Systems Inc. Address No.2 Budside, Yangyoug Riverside Development Area Tangxiayoug, Songgang Town 518105 Banan district Shen Zhen City China 2.4 General Description for Equipment under Test (EUT) EUT Name Wireless Snapshot Model Name Under Test BT-400 Series Model Name N/A Description of Model name differentiation N/A Hardware Version N/A Software Version N/A Dimensions (Approx.) N/A Weight (Approx.) N/A 2.5 Ancillary Equipment Note: Not applicable. Report No.: BL-SZ2280566-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 5 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, S…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2280566-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Cyber Power Systems, Inc Address: 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan Equipment Type: Wireless Snapshot Model Name: BT-400 Brand Name: CliqueFie Test Standard: ANSI/IEEE Std 149-1979 Test Date: Oct. 17, 2022 Date of Issue: Oct. 20, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tu Lang (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2280566-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Oct. 20, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2280566-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2280566-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Cyber Power Systems, Inc Address 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan 2.2 Manufacturer Information Manufacturer Cyber Power Systems, Inc Address 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan 2.3 General Description for Equipment under Test (EUT) EUT Name Wireless Snapshot Model Name Under Test BT-400 Antenna Type PCB Antenna Dimensions 9*3mm 2.4 Ancillary Equipment Note: Not applicable. 2.5 Technical Information Test Frequencies 2400MHz, 2410MHz, 2420MHz, 2430MHz, 2440MHz, 2450MHz, 2460MHz, 2470MHz, 2480MHz, 2490MHz, 2500MHz Report No.: BL-SZ2280566-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 5 / 13 Web: www.titcgroup.…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2280566-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 52 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Cyber Power Systems, Inc Address: 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan Equipment Type: Wireless Snapshot Model Name: BT-400 Brand Name: CliqueFie FCC ID: 2AFG8BT400 ISED Number: 11470A-BT400 Test Standard: 47 CFR Part 15 Subpart C RSS-Gen Issue 5 RSS-247 Issue 2 (refer section 3.1) Test Date: Aug. 26, 2022 - Sep. 02, 2022 Date of Issue: Oct. 19, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2280566-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 52 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 29, 2022 Initial Issue Rev. 02 Oct. 19, 2022 Updated the EUT Name; Updated antenna gain and related data TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 2.6 Additional Instructions .................................................................................................... 7 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Output Power ............................................................................................................... 15 Report No.: BL-SZ2280566-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 52 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.3 Occupied Bandwidth .................................................................................................... 17 5.4 Conducted Spurious Emission ..................................................................................... 18 5.5 Band Edge (Authorized-band band-edge) .................................................................... 20 5.6 Conducted Emission .................................................................................................... 22 5.7 Radiated Spurious Emission ........................................................................................ 23 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 28 5.9 Power Spectral density (PSD) ...................................................................................... 29 ANNEX A TEST RESULT ............................................................................................................. 30 A.1 Output Power, E.I.R.P, Duty Cycle ............................................................................... 30 A.2 Occupied Bandwidth .................................................................................................... 33 A.3 Conducted Spurious Emissions ................................................................................... 35 A.4 Band Edge (Authorized-band band-edge) ..........…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2280566-AA 1 / 1 EUT PHOTO Antenna

Report No.: BL-SZ2280566-AO 1 / 1 TEST SETUP PHOTOS

Report No.: BL-SZ2280566-AR 1 / 3 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz 30MHz-1GHz Report No.: BL-SZ2280566-AR 2 / 3 Close-up Above 1GHz Report No.: BL-SZ2280566-AR 3 / 3 Close-up 2 Conducted Test Photo Conducted Test-BLE