2AFJT-SMARTSTREAM254 Nanometer Germicidal UV Disinfection of Water Systems

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two condi- tions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Lé present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Any changes or modifications of this product not approved by the manufacturer could void the user’s authority to operate the equipment. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent iso- tropically radiated power (e.i.r.p.) is not more than that neces- sary for successful communication. IOM-WQ-SmartStream-BCD Installation Precautions ...................................3 System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Product Specification Tables .............................5-7 Dimensions ............................................8 Feed Water Requirements.................................9 Installation Procedure .................................9-10 Maintenance ..........................................11 Lamp and Quartz Sleeve Replacement ......................11 Disinfection Procedure...................................11 Parts List..........................................12-13 Troubleshooting........................................14 Controller Identification ..................................15 Overview of Screens .................................16-20 Controller Wiring .......................................21 Warranty and Conditions.................................24 Table of Contents Original Instructions Read this Manual BEFORE using this equipment. Failure to read and follow all safety and user information can result in death, serious personal injury, property damage, or damage to the equipment. Keep this Manual for future reference. WARNING ! This appliance contains a UV-C emitter (UV lamp). Unintended use of the appliance or dam- age to the housing may result in the escape of dangerous UV-C radiation. UV-C radiation may, even in little doses, cause harm to the eyes and skin. Appliances that are obviously damaged must not be operated. Do not operate the UV-C emitter when it is removed from the appliance enclosure. The appliance must be disconnected from the power supply before replacing the UV-C emitter. DO NOT look directly at the UV-C emitter while it is ON. Permanent serious eye injury could occur. WARNING ! Installation, Operation and Maintenance Manual 254 Nanometer Germicidal UV Disinfection Systems Models WB001 WB002 WB006 WB008 WB012 WC012 WC016 WC020 WC025 WC040 WC050 WD012 WD016 WD020 WD025 WD040 WD050 SmartStream ™ UV Chemical Free Disinfection of Water SmartStream UV is certified by the Water Quality Association (WQA) to NSF/ANSI Standard 372 for lead free. ™ 2 Watts SmartStream ™ UV systems are engi- neered with the highest quality components. If at anytime a component needs to be replaced, use only parts recommended and supplied by Watts. DO NOT add components to or remove components from this system. The UV lamp is rated for 9000 hours under normal operating conditions and should be replaced annually to keep the UV intensity at the highest possible output. Quartz sleeves should be cleaned as needed or replaced as needed to guarantee the highest possible UV transmittance into the water. Use only Watts supplied UV lamps and quartz sleeves for your specific model. Failure to do so may result in system failure and will void all warranty. DO NOT use this system in a manner that it is not intended for. This purifier is only for use in water applications where the feed water, installation environment and installation method meets the requirements within this manual. The system must be properly sized. DO NOT exceed the rated flow rate capacity of the sys- tem. Flow controllers are available from Watts to ensure system's rated flow is not exceeded. Follow all product safety labeling. • DO NOT let the system freeze. System dam- age may result. • Install the system on a flat, and level surface. • The quality of the water to be treated must meet the feed water guidelines within this manual. Failure to ensure proper pretreat- ment will result in inadequate disinfection. NOTICE Introduction The Watts SmartStream ™ line of ultraviolet disinfection systems provide protection against microbiological contamination in water for residential and commercial applications. Disinfection of water with SmartStream ™ is a simple, rapid physical process. When contaminated water is exposed to SmartStream's ™ 254 nanometer UV light, the UV light penetrates the cell walls of microorganisms and disrupts their genetic deoxyribonucleic acid (DNA) material. This quickly inactivates microorganisms by destroy- ing their ability to replicate and infect. This system should only be installed and main- tained by a qualified professional. Observe all …

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: November 25, 2015 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______Global EMC Inc.______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that submitted documents properly describe the device or system for which equipment certification is sought.We also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: October 15, 2016 By: ___________________________ Keith McClintock_ (Signature) (Print name) Title: Certifications Engineer On behalf of: Watts Water Quality (Company Name) Telephone: 800-659-8400 ext 147

Request for Confidentiality Date: October 13, 2015 Subject: Confidentiality Request for: FCC ID: 2AFJT-SMARTSTREAM; IC: 20623-SMARTSTREAM Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual Watts Water Quality has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential and be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: __________________________ Keith McClintock (Signature/Title) (Print name)

WD050A – View 1 WD050A – View 2 WC016A – View 1 WC016A – View 2 Close-up of controller exterior. Controller on WD050A is shown. Note cable between RFID board (inside enclosure), and antenna, is circled in red. Identical for D-Series and C-Series. RFID antenna cable Close-up showing routing of cable between antenna and PCB, shown circled in red. Identical for D-Series and C-Series. RFID antenna cable Close-up showing routing of RFID antenna cable, and location of antenna. Identical for D-Series and C-Series. RFID antenna location RFID antenna cable

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WB001 FCC ID: 2AFJT-SMARTSTREAM-B IC: 20623-SMARTSTRMB INPUT: 100-240V ~ 50/60Hz 0.5A - 0.3A LAMP: T7402141 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WB002 FCC ID: 2AFJT-SMARTSTREAM-B IC: 20623-SMARTSTRMB INPUT: 100-240V ~ 50/60Hz 0.5A - 0.3A LAMP: T7402142 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WB006 FCC ID: 2AFJT-SMARTSTREAM-B IC: 20623-SMARTSTRMB INPUT: 100-240V ~ 50/60Hz 0.5A - 0.3A LAMP: T7402143 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WB008 FCC ID: 2AFJT-SMARTSTREAM-B IC: 20623-SMARTSTRMB INPUT: 100-240V ~ 50/60Hz 0.5A - 0.3A LAMP: T7402144 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WB0012 FCC ID: 2AFJT-SMARTSTREAM-B IC: 20623-SMARTSTRMB INPUT: 100-240V ~ 50/60Hz 0.5A - 0.3A LAMP: T7402144 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC012 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402146 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC016 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402147 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC020 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402148 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WD012 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402146 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC040 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402150 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC025 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402148 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WC050 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402151 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WD016 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402147 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WD020 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402148 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WATTS MODEL: WD025 FCC ID: 2AFJT-SMARTSTREAM IC: 20623-SMARTSTREAM INPUT: 100-240V ~ 50/60Hz 1.5A - 0.7A LAMP: T7402148 This device complies with part 15 of the FCC Rules. Operation is subj…

Text truncated - open the document above for the full version.

D-Series – Controller enclosure opened (WD050A) 1. Main PCB 5. LCD board 4. Cable connecting LCD Board to main PCB 3. RFID board 2. LCD board connector pins Item #1. D-series controller main PCB (from WD050) – View 1 Item #1. D-series controller main PCB (from WD050) – View 2 3. RFID board Item #5. D-series LCD board close-up – View 1 Item #5. D-series LCD board close-up – View 2 C-Series – Controller enclosure opened (WC016A) Item 6. C-series controller main PCB (from WC016A) – View 1 6. Main PCB 7. 2 buttons 8. 7-segment display 3. RFID board 3. RFID board Item 6. C-series controller main PCB (from WC016A) – View 2 Item #3. RFID board, close-up – View 1 Identical for D-Series and C-Series Item #3. RFID board, close-up – View 2 Identical for D-Series and C-Series RFID antenna, cover opened Identical for D-Series and C-Series 9. RFID antenna Item #9. RFID antenna – View 1 Identical for D-Series and C-Series Item #9. RFID antenna – View 2 Identical for D-Series and C-Series

LAB REGISTRATION #6844A-3 FCC REGISTRATION #377448 Testing Laboratory Certificate #2555.01 Page 1 of 67 Report issue date: 11/13/2015 GEMC File #: GEMC-FCC-22847R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. This report is based on GEMC Template “FCC 15 247 Rev2.” Global EMC Inc. Labs EMC & RF Test Report As per RSS 210 Issue 8:2010 & FCC Part 15 Subpart C:2015 Unlicensed Intentional Radiators on the Watts Water Quality UV SMARTSTREAM Raymond Lee Au, B.Eng Project Engineer Global EMC Inc. 11 Gordon Collins Dr. Gormley, ON Canada, L0H 1G0 Ph: (905) 883-8189 Testing produced for See Appendix A for full customer & EUT details. Client Watts Water Quality Product UV SMARTSTREAM Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2015 Page 2 of 67 Report issue date: 11/13/2015 GEMC File #: GEMC-FCC-22847R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Justifications, Descriptions, Deviations & Notes .............................................................. 6 Applicable Standards, Specifications and Methods ........................................................... 8 Sample calculation(s) ......................................................................................................... 9 Document Revision Status ................................................................................................. 9 Definitions and Acronyms ................................................................................................... 10 Testing Facility .................................................................................................................... 11 Calibrations and Accreditations ....................................................................................... 11 Testing Environmental Conditions and Dates ................................................................. 12 Detailed Test Results Section .............................................................................................. 13 Radiated Emissions – Spurious ........................................................................................ 14 Radiated Emissions – Fundamental ................................................................................. 42 20 dB Bandwidth ............................................................................................................. 51 Power Line Conducted Emissions ................................................................................... 53 Appendix A – EUT Summary .............................................................................................. 62 Appendix B – EUT and Test Setup Photographs................................................................. 64 Client Watts Water Quality Product UV SMARTSTREAM Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2015 Page 3 of 67 Report issue date: 11/13/2015 GEMC File #: GEMC-FCC-22847R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Report Scope This report addresses the EMC testing and test results of the Watts Water Quality UV SMARTSTREAM water treatment system. This unit is herein referred to as EUT (Equipment Under Test). Testing is performed at Global EMC Labs. The EUT was tested for compliance against the following standards: RSS 210 Issue 8:2010 FCC Part 15 Subpart C:2015 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. The results contained in this report relate only to the item(s) tested. This report does not imply product endorsement by A2LA or any other accreditation agency, any government, or Global EMC Inc. Opinions/interpretations expressed in this report, if any, are outside the scope of Global EMC Inc accreditation. Any opinions expressed do not necessarily reflect the opinions of Global EMC Inc, unless otherwise stated. Client Watts Water Quality Product UV SMARTSTREAM Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2015 Page 4 of 67 Report issue date: 11/13/2015 GEMC File #: GEMC-FCC-22847R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Summary The results contained in this report relate only to the item(s) tested. EUT FCC Certification #, FCC ID: 2AFJT-SMARTSTREAM EUT Industry Canada Certification #, IC: 20623-SMARTSTREAM EUT Passed all tests performed. Yes (see test results summary) Tests conducted by Raymond Lee Au Client Watts Water Quality Product UV SMARTSTREAM Standard(s) RSS 210 Issue 8:2010 / FCC Part 15 Subpart C 15:2015 Page 5 of 67 Report issue date: 11/13/2015 GEMC File #: GEMC-FCC-22847R1 © Global EMC Inc. This test report shall not be reproduced except in full, without written approval of Global EMC Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 15.203 Antenna Requirement Unique Pass See Justifications FCC 15.205 RSS-GEN (Table 6) Restricted Bands for intentional operation Quasi-Peak Average Pass FCC 15.207 RSS-GEN (Table 3) Power Line Conducted Emissions Quasi-Peak Average Pass FCC 15.209 RSS-GEN (Tables 4.5) Spurious Radiated emissions Quasi-Peak Average Pass Overall Result PASS All tests were performed by Raymond Lee Au. If the product as tested or otherwise complies wit…

Text truncated - open the document above for the full version.

Radiated emissions, 9 kHz – 30 MHz Radiated emissions, 30 MHz – 1 GHz Conducted emissions