2AFO3-TC500Intelligent All-In-One Machine

KS090500G4-Ver1.0 User’s Manual Applicable for model(s) : TC200/TC200(N)/TC200(L) TC500/TC500(N)/TC500(L) TC800/TC800(N)/TC800(L) TC1200/TC1200(N)/TC1200(L) GUANGZHOU OSTEC ELECTRONIC TECHNOLOGY CO.,LTD. http://www.ostec.com.cn Intelligent All-In-One Machine KS090500G4-Ver1.0 Content Chapter 1 Notes and Safety Requirements ............................................ - 1 - 1.1 Cautions and Notes .................................................................... - 1 - Chapter 2 Software System Requirements ............................................ - 2 - 2.1 System Requirements for connection to PC Work Mode ......... - 2 - 2.2 System Requirements for HDMI Work Mode .......................... - 2 - 2.3 System Requirements for WiFi Work Mode ............................. - 2 - Chapter 3 Package List .......................................................................... - 3 - Chapter 4 Introduction to Camera Body ................................................ - 4 - 4.1Introduction to camera body ....................................................... - 4 - Chapter 5 Product Installation ............................................................... - 6 - 5.1 Install with a binocular microscope ........................................... - 6 - 5.2 Uninstallation with a binocular microscope .............................. - 7 - Chapter 6 Instructions for Use ............................................................... - 8 - 6.1 Software installation .................................................................. - 8 - 6.2 Camera connection .................................................................... - 8 - 6.2.1 WiFi connection ................................................................ - 8 - 6.2.2 HDMI connection ............................................................. - 9 - 6.3 Parfocal ...................................................................................... - 9 - 6.4 Start to use ................................................................................. - 9 - Chapter 7 Disclaimer ........................................................................... - 10 - KS090500G4-Ver1.0 - 1 - Chapter 1 Notes and Safety Requirements 1.1 Cautions and Notes (1) To avoid danger or damage incurred to the lens, do not touch the lens or sensor directly with your fingers. (2) To avoid failure or electric shock hazard and so on, do not disassemble or modify the internal structure of the device. (3) Do not plug in or unplug the USB port or the HDMI port when hands are wet. (4) Do not use alcohol and other organic solvents to clean. (5) If the lens or sensor is dirty or damp, you should better use dry and non-linen fabric or professional lens tissue to wipe them. To avoid scratches on the surface, do not touch the lens with your fingers. Wipe the lens or sensor lightly. (6) The products are not specifically designed for an outdoor use. Do not expose it to outdoor environment without any protection. Excessive temperature and humidity will damage the lens. Please avoid using the product under the following environment: high temperature or high humidity environment, places with direct sunlight, dirt or vibration and places near heat source. (7) Please use and store in the following environment: Operating temperature ：0°C~ 40°C Storage temperature：-20°C~ 60°C Operating Humidity ：30~60%RH Storage Humidity：10~80%RH (8) If any foreign matter, water or liquid enter into the device by accident, disconnect the USB cable immediately. Please send it to the maintenance center and do not use the hair dryer to dry it by yourself. (9) To prevent microscope from being tripped over or dropped, please put away the device's USB cables in use or standby. (10) To avoid electric shock by accident, please power off microscope before you move your computer or laptop. (11) The cleanliness of the device lens will directly affect clarity degree of contents from the computer screen during preview. Problems like various circles or spots on the screen may mostly be incurred by dirt on the lens. When cleaning, please use professional lens tissue or other professional detergent to clear the dirt on the lens. (12) Registered trademark and copyright information: this product is copyrighted by GUANGZHOU OSTEC ELECTRONIC TECHNOLOGY CO.,LTD.Without written authorization of the company, any organization or individual shall not copy, print or translate any part of this article into another language. KS090500G4-Ver1.0 - 2 - Chapter 2 Software System Requirements 2.1 System Requirements for connection to PC Work Mode ● Windows 7(64 bits) 、Windows 8(64 bits)、Windows8.1(64 bits)、Windows10(64 bits) ● Dual core 3.0 GHz or higher CPU ● 8G RAM or more ● At least 10 GB available hard-disk space ● 1000Mbps/100Mbps compatible with network cable interface 2.2 System Requirements for HDMI Work Mode ●The monitor has an HDMI TYPE A interface. ● The display supports up to 3840x2160 P60 input ● Display HDMI interface support hot plug 2.3 System Requirements for WiFi Work Mode  8.0 and later version is supported for iOS system  5.0 and later version is supported for Androidsystem  Wireless network hardware must support 802.11n/ac protocol. KS090500G4-Ver1.0 - 3 - Chapter 3 Package List 1.Smart all-in-on displayer camera 2.12V AC adapter 3.Allen key 4.Mouse 5.Keyboard 6.Installation disk KS090500G4-Ver1.0 - 4 - Chapter 4 Introduction to Camera Body 4.1Introduction to camera body ①WiFi antenna: external signal antenna can enhance WiFi signal transmission ②15.6" LCD screen ③Speaker hole: volume channel hole ○ 4USB3.0 interface：Can connect a mouse, keyboard or USB flash disk, convenient use of embedded APP ○ 5USB2.0 interface：Can connect a mouse, keyboard or USB flash disk, convenient use of embedded APP ○ 6HDMIinterface：Through the HDMI cable, connect with the display device with HDMI interface, realize video, signal transmission ○ 7Rotation axis:Support the display front and back , up and down rotation ○ 8Power…

Text truncated - open the document above for the full version.

GuangZhou Ostec Electronic Technology Co.,Limited 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Tel: +86-13825082692 E-mail: [email protected] Date: 2020-09-14 Dear Sir/Madam, We, GuangZhou Ostec Electronic Technology Co.,Limited Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Intelligent All-In-One Machine Model no.: TC500, TC200, TC200(N), TC200(L), TC500(N), TC500(L), TC800, TC800(N), TC800(L), TC1200, TC1200(N), TC1200(L), HD210-M, HD510-M, HD810-M, HD1210-M, HD210- M(N), HD510-M(N), HD810-M(N), HD1210-M(N), HD210-M(L), HD510-M(L), HD810-M(L), HD1210- M(L), AC1200, HD210-MN, HD210-ML, TE500, TE500N, TE500L, TE800, TE800N, TE800L, TE1200, TE1200N, TE1200L, TE2000, TE2000N, TE2000L, WF01A, VM3500, NA001, MF211-M, MF511-M, MF811-M, MF1211-M, MF211-M(N), MF511-M (N), MF811-M(N), MF1211-M(N), MF211- M(L), MF511-M(L), MF811-M(L), MF1211-M(L), MC211-M04, MC511-M04, MC811-M04, MC1211- M04, MC211-M04N, MC511-M04N, MC811-M04N, MC1211-M04N, MC211-M, MC511-M, MC811- M, MC1211-M, HD32, HD32-S, HC52-H, HC62; CE210, DP125, JX200, JX500, JX800, JX1200, HE210-M, HE510-M, HE810-M, HE1210-M, HE210-MN, HE510-MN, HE810-MN, HE1210-MN, HE210-ML, HE510-ML, HE810-ML, HE1210-ML, HE210-MZ, HE510-MZ, HE810-MZ, HE1210-MZ, TE800Z, TE1200Z, HE510, HE810, HE1210, HE2010, HE1210-M, HE2010-M, HE510-N, HE810-N, HE1210-N, HE1210-MN, HE2010-N, HE2010-MN, HE510-L, HE810-L, HE1210-L, HE1210-ML, HE2010-L, HE2010-ML, HE510-Z, HE810-Z, HE1210-Z, HE1210-MZ, HE2010-Z, HE2010-MZ FCC ID: 2AFO3-TC500 Sincerely, Name: Junqiang Wen Company: GuangZhou Ostec Electronic Technology Co.,Limited GuangZhou Ostec Electronic Technology Co.,Limited 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Tel: +86-13825082692 E-mail: [email protected] Address: 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Phone: +86-13825082692 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/09/14 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AFO3-TC500 TC200, TC200(N), TC200(L), TC500(N), TC500(L), TC800, TC800(N), TC800(L), TC1200, TC1200(N), TC1200(L), HD210-M, HD510-M, HD810-M, HD1210-M, HD210-M(N), HD510-M(N), HD810-M(N), HD1210-M(N), HD210-M(L), HD510-M(L), HD810-M(L), HD1210-M(L), AC1200, HD210-MN, HD210-ML, TE500, TE500N, TE500L, TE800, TE800N, TE800L, TE1200, TE1200N, TE1200L, TE2000, TE2000N, TE2000L, WF01A, VM3500, NA001, MF211-M, MF511-M, MF811-M, MF1211-M, MF211-M(N), MF511-M (N), MF811-M(N), MF1211-M(N), MF211-M(L), MF511-M(L), MF811-M(L), MF1211-M(L), MC211-M04, MC511-M04, MC811-M04, MC1211-M04, MC211-M04N, MC511-M04N, MC811- M04N, MC1211-M04N, MC211-M, MC511-M, MC811- M, MC1211-M, HD32, HD32-S, HC52-H, HC62; CE210, DP125, JX200, JX500, JX800, JX1200, HE210-M, HE510-M, HE810-M, HE1210-M, HE210-MN, HE510- MN, HE810-MN, HE1210-MN, HE210-ML, HE510-ML, HE810-ML, HE1210-ML, HE210-MZ, HE510-MZ, HE810-MZ, HE1210-MZ, TE800Z, TE1200Z, HE510, HE810, HE1210, HE2010, HE1210-M, HE2010-M, HE510-N, HE810-N, HE1210-N, HE1210-MN, HE2010- N, HE2010-MN, HE510-L, HE810-L, HE1210-L, HE1210-ML, HE2010-L, HE2010-ML, HE510-Z, HE810- Z, HE1210-Z, HE1210-MZ, HE2010-Z, HE2010-MZ For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Junqiang Wen Company: GuangZhou Ostec Electronic Technology Co.,Limited Address: 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Phone: +86-13825082692 Fax: N/A E-Mail: [email protected]

GuangZhou Ostec Electronic Technology Co.,Limited 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Tel: +86-13825082692 E-mail: [email protected] Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/14/2020 To whom it may concern: We, GuangZhou Ostec Electronic Technology Co.,Limited the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AFO3-TC500 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name: Junqiang Wen Company: GuangZhou Ostec Electronic Technology Co.,Limited Address: 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Phone: +86-13825082692 Fax: N/A E-Mail: [email protected]

GuangZhou Ostec Electronic Technology Co.,Limited 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Tel: +86-13825082692 E-mail: [email protected] UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID：2AFO3-TC500 (1) DFS Device:  Master  Client with Radar detection capability ■ N/A  Client without radar detection capability, (2) Active / Passive Scanning ,adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode Capability Access point Capability 5745-5825  Yes  No  Yes  No  Yes  No  Yes  No 5755-5795  Yes  No  Yes  No  Yes  No  Yes  No 5775-5775  Yes  No  Yes  No  Yes  No  Yes  No 5180-5240  Yes  No  Yes  No  Yes  No  Yes  No 5190-5230  Yes  No  Yes  No  Yes  No  Yes  No 5210-5210  Yes  No  Yes  No  Yes  No  Yes  No 5260-5320 N/A N/A N/A N/A N/A N/A N/A N/A 5270-5310 N/A N/A N/A N/A N/A N/A N/A N/A 5290-5290 N/A N/A N/A N/A N/A N/A N/A N/A 5500-5700 N/A N/A N/A N/A N/A N/A N/A N/A 5510-5670 N/A N/A N/A N/A N/A N/A N/A N/A 5530-5610 N/A N/A N/A N/A N/A N/A N/A N/A (3) Country code selection ability  Yes  No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement  Yes  No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer.  Apply  Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Sincerely, Name: Junqiang Wen Company: GuangZhou Ostec Electronic Technology Co.,Limited Address: 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Phone: +86-13825082692 Fax: N/A E-Mail: [email protected]

FCC ID:2AFO3-TC500 antenna FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500

FCC ID:2AFO3-TC500 FCC ID: 2AFO3-TC500 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500 FCC ID:2AFO3-TC500

RF Exposure evaluation FCC ID: 2AFO3-TC500 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information UHD 2000 can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna Identification in Internal photos Antenna type and antenna number Operate frequency band Maximum antenna gain Antenna 1 5G Wifi External antenna 5.1GHz – 5.8 GHz 5.00 dBi 5. Manufacturing Tolerance 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 5dBi, the RF power density can be obtained. 5GHz WLAN 5GHz WLAN Band 1 5GHz WLAN Band 4 IEEE 802.11a (Average) Frequency (MHz) 5180 5200 5240 5745 5785 5825 Target (dBm) 12.0 12.0 12.0 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) IEEE 802.11n HT20 (Average) Frequency (MHz) 5180 5200 5240 5745 5785 5825 Target (dBm) 12.0 12.0 12.0 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 1.0 1.0 1.0 IEEE 802.11ac VHT20 (Average) IEEE 802.11ac VHT20 (Average) Frequency 5180 5200 5240 5745 5785 5825 (MHz) Target (dBm) 12.0 12.0 12.0 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) IEEE 802.11n HT40 (Average) Frequency (MHz) 5190 5230 5755 5795 Target (dBm) 12.0 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 1.0 IEEE 802.11ac VHT40 (Average) IEEE 802.11ac VHT40 (Average) Frequency (MHz) 5190 5230 5755 5795 Target (dBm) 12.0 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 1.0 IEEE 802.11ac VHT80 (Average) IEEE 802.11ac VHT80 (Average) Frequency (MHz) 5210 5775 Target (dBm) 11.0 10.0 Tolerance ± (dB) 1.0 1.0 5GHz WLAN Band 1 Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) Duty Cycle MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11a 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11n HT20 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT20 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11n HT40 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT40 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT80 12.00 15.8489 5.00 3.1623 100% 0.0100 1.0000 5GHz WLAN Band 3 Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) Duty Cycle MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11a 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11n HT20 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT20 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11n HT40 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT40 13.00 19.9526 5.00 3.1623 100% 0.0126 1.0000 IEEE 802.11ac VHT80 11.00 12.5893 5.00 3.1623 100% 0.0079 1.0000 Remark: 1. Output power (Average) including turn-up tolerance; 2. Output power was adjust to duty cycle at 100% if measured duty cycle less than 98%; 3. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC TEST REPORT FCC PART 15 SUBPART E 15.407 Report Reference No. ..................... : FCC ID. ........................................... : GTS20200906013-1-3 2AFO3-TC500 Compiled by ( position+printed name+signature) .. : File administrators Jimmy Wang Supervised by ( position+printed name+signature) .. : Test Engineer Aaron Tan Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Sep. 08, 2020 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong, China Applicant’s name ............................ : GuangZhou Ostec Electronic Technology Co.,Limited Address ............................................ : 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Test specification ...........................: Standard ........................................... : FCC Part 15 Subpart E 15.407 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Intelligent All-In-One Machine Trade Mark ....................................... : Manufacturer ................................... : GuangZhou Ostec Electronic Technology Co.,Limited Model/Type reference....................... : TC500 Listed Models .................................. : See next page Ratings ............................................. : 12V5A Modulation ....................................... : OFDM Hardware version ............................. : YT01-TP2-V1.7 Software version .............................. : V1.0 Frequency .......................................... From 5180MHz-5240MHz, 5745MHz-5825MHz Result................................................ : PASS Report No.: GTS20200906013-1-3 Page 2 of 47 T E S T R E P O R T Test Report No. : GTS20200906013-1-3 Sep. 08, 2020 ____________________________________________________________________________________ Date of issue Equipment under Test : Intelligent All-In-One Machine Model /Type : TC500 Listed Models : TC200, TC200(N), TC200(L), TC500(N), TC500(L), TC800, TC800(N), TC800(L), TC1200, TC1200(N), TC1200(L), HD210-M, HD510-M, HD810-M, HD1210-M, HD210-M(N), HD510-M(N), HD810-M(N), HD1210-M(N), HD210-M(L), HD510-M(L), HD810-M(L), HD1210-M(L), AC1200, HD210-MN, HD210-ML, TE500, TE500N, TE500L, TE800, TE800N, TE800L, TE1200, TE1200N, TE1200L, TE2000, TE2000N, TE2000L, WF01A, VM3500, NA001, MF211-M, MF511-M, MF811-M, MF1211-M, MF211-M(N), MF511-M (N), MF811-M(N), MF1211-M(N), MF211-M(L), MF511-M(L), MF811-M(L), MF1211-M(L), MC211-M04, MC511-M04, MC811-M04, MC1211-M04, MC211-M04N, MC511-M04N, MC811-M04N, MC1211-M04N, MC211-M, MC511-M, MC811- M, MC1211-M, HD32, HD32-S, HC52-H, HC62; CE210, DP125, JX200, JX500, JX800, JX1200, HE210-M, HE510-M, HE810-M, HE1210-M, HE210-MN, HE510-MN, HE810-MN, HE1210-MN, HE210-ML, HE510-ML, HE810-ML, HE1210-ML, HE210-MZ, HE510-MZ, HE810-MZ, HE1210-MZ, TE800Z, TE1200Z, HE510, HE810, HE1210, HE2010, HE1210-M, HE2010-M, HE510-N, HE810-N, HE1210-N, HE1210-MN, HE2010-N, HE2010-MN, HE510-L, HE810-L, HE1210-L, HE1210-ML, HE2010-L, HE2010-ML, HE510-Z, HE810-Z, HE1210-Z, HE1210-MZ, HE2010-Z, HE2010-MZ Applicant : GuangZhou Ostec Electronic Technology Co., Limited Address : 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Manufacturer : GuangZhou Ostec Electronic Technology Co., Limited Address : 2 of No.8 West Lane, Jiangcheng Road, Bangjiang East Village, Dalong Street,Panyu District, Guangzhou City, Guangdong, P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20200906013-1-3 Page 3 of 47 Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Test Sample 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Special Accessories 6 2.8 Related Submittal(s) / Grant (s) 6 2.9 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emissions 13 4.3 Maximum Conducted Average Output Power 19 4.4 Power Spectral Density 21 4.5 Emission Bandwidth (26dBm Bandwidth) 28 4.6 Minimum Emission Bandwidth (6dBm Bandwidth) 32 4.7 Frequency Stability 36 5 T E S T S E T U P P H O T O S…

Text truncated - open the document above for the full version.

FCC ID:2AFO3-TC500