2AFSCSK-26Wireless Musical Eyemask

Thank you for purchasing this Wireless Musical Eye Mask. Please read these instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. The Wireless Musical Eye Mask is suitable for Bluetooth compatible device like mobile phones. Users can listen to music and conduct phone calls hands free. The article is for personal use only and is not intended for commercial applications. The article may only be used in the manner described in the instructions. Any other use is deemed to be improper. Before using the article, please read the instructions through carefully and keep them for future reference. If you pass the article on to third party, it must always be accompanied by this User Manual. If you have any question, please contact the customer service department. Intended Use Safety Instructions Dangers of Injury Keep the article and the package away from children and animals as they can swallow small parts. Supervise children using the article. It is not a toy. Always maintain a gap of at least 10 cm between the headphones and a pacemarker or an implantable cardioverter debrillator (ICD) as the article generates magnetic elds. Do not crush or pierce the battery! Do not expose the battery to high pressure, as this may cause an internal short-circuit and overheating. The headphones and their rechargeable battery must not be taken apart, thrown into a re, immersed in liquids or shortcircuited. If the headphones are not used for a prolonged period of time, recharge it regularly (roughly every 3 months). Material and Article Damage Always keep the headphones dry and do not expose them to any extreme temperatures, electrostatic interference or dust. Do not expose the article to any severe impacts or high pressure. In the event of damage/faults, switch the article off immediately. Do not use it if it is damaged. Never repair or modify an electrical article by yourself, but instead always visit your nearest customer service department / specialist to guarantee your own safety. In the event of damage, contact the customer service department. Switch the article off after use to conserve the battery. Only ever use the article in environments in which the wireless Bluetooth technology is permitted. Prolonged storage or use may impair the quality of the ear cushions. Package Contents Wireless Musical Eye Mask Micro USB Charging Cable User Manual Charging the Battery Volume Down/Previous Song Play/Pause/Answer/Hang Off/Redial LED Status Light/Microphone Volume Up/Next Song/SIRI Charging Port 5 WARNING: Avoid excessive volumes, particularly over extended periods or in the case of frequent use. Listening to music at maximum volume for prolonged periods can lead to hearing damage. Its best to avoid extreme volume when using this product, especially for extended periods. For your own safety, please be aware of your surroundings when using this product. Make sure the article is switched off. Then: 1. Connect the micro USB end of the charging cable to the Charging Port [5] on the beanie and the standard USB end to a power source like PC USB or USB mains charger. 2. The LED Status Light [4] will be red whilst charging. It will turn to blue as soon as the battery fully charged. Before you can use this article, it need to be paired to your device. To do this: 1. Long press the Play/Pause [2] button for 3 seconds until the LED Status Light [4] starts to ash alternately red and blue quickly. 2. Switch on Bluetooth on your phone or other Bluetooth enabled device. 3. Search and select Musical Eye Mask from the list of found devices. 4. If asked for a passcode, enter 0000. 5. After paired successfully, only the blue light ash slowly. 6. When the article switched on next time, it will automatically search for and attempt to connect to the last paired device. 3. Music selection: Short Press the Previous [1] button or Next [3] button to to select previous or next songs. NOTE: Play/Pause and Music Selection functions will only work on devices which support Bluetooth prole AVRCP. Call-Handling 1. Answer a call: When a call coming, it will play a ring tone. Then press the Play/Pause [2] button to answer. During the call, you can increase and decrease the volume by long press Volume +[3] or Volume - [1] buttons. 2. Reject a call: When a call coming, it will play a ring tone. Long press the Play/Pause [2] button for 2 seconds to reject it. 3. End a call: During a call, short press the Play/Pause [2] button to end a call. 4. Re-dial: Press the Play/Pause [2] button twice in quick succession to redial the last phone number you called. Acticate/Deactivate SIRI 1. Acticate SIRI: Press the Volume + [3] button twice in quick succession to activate SIRI on iOS device. 2. Talk to Microphone [4] directly to communicate with SIRI, its the same effect with talking to iOS device directly. 3. Deactivate SIRI: Short press Play/Pause [2] button to deactivate SIRI. device and theres no obstructions like walls or other electronics devices between the article and the device. 3. Only one device can be connected to the article at a time, ensure theres no other Bluetooth device already connected to the article. 4. If you receive an intermittent signal, please ensure the article is in the effective range from your device. Specifications Washing Guidelines Please remove the electronic components from the Eye Mask before washing. Hand wash only. Hand wash ONLY DO NOT dry clean DO NOT bleach DO NOT iron DO NOT tumble dry Wash with cold water WIRELESS MUSICAL EYE MASK Pairing a New Bluetooth Device If need to pair with a new Bluetooth device, follow below steps: 1. Make sure the Bluetooth is turned off on the previous paired device. 2. Follow Pairing a Bluetooth Device instructions from step 1. NOTE: To preserve the battery, the article will switch off automatically if no Bluetooth connection for 3 minutes. RECHARGEABLE LI-POLYMER BATTERY HANDS FREE TALKING BUILT-IN MICROPHONE COMPATIBLE WIT…

Text truncated - open the document above for the full version.

Seekas Technology Co., Ltd. Address: 2F, Building A, 5# East Zone Shangxue Industrial Park, Bantian, Buji，Shenzhen ,China Email: [email protected] Tel: 86-755-89583985 Product Similarity Declaration Date: 2020-04-08 Dear Sir/Madam, We, Seekas Technology Co., Ltd., hereby declare that we have a product named as Wireless Musical Eyemask, FCC ID: 2AFSCSK-26, model: SK-26 was tested by BACL, Meanwhile, for our marketing purpose, we would like to list a series model (SK-20, SK-25, SK-28) on reports and certificate, all the models are identical in schematics, they have different model name, headgear and color. No other changes are made on them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Rex Chou Manager

Seekas Technology Co., Ltd. Address: 2F, Building A, 5# East Zone Shangxue Industrial Park, Bantian, Buji，Shenzhen ,China Tel.: 86-755-89583985 E-mail: [email protected] QA-FR-170-B FCC Authorization Date: 2020-04-13 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: W e, Seekas Technology Co., Ltd. hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Rex Chou Manager

Seekas Technology Co., Ltd. Address: 2F, Building A, 5# East Zone Shangxue Industrial Park, Bantian, Buji，Shenzhen ,China Tel.: 86-755-89583985 E-mail: [email protected] FCC Confidential Authorization Date: 2020-04-13 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AFSCSK-26 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Seekas Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Rex Chou Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS USB port

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS IC Antenna Battery

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Seekas Technology Co., Ltd. 2F, Building A, 5# East Zone Shangxue Industrial Park, Bantian, Buji, Shenzhen, China FCC ID: 2AFSCSK-26 Report Type: Original Report Product Type: Wireless Musical Eyemask Re port Number: RSZ200316004-00A Re port Date: 2020-04-09 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200316004-00A FCC Part 15.247 Page 2 of 32 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC§15.247 (i), §1.1307 (b) (1) &§2.1093 – RF EXPOSURE ...................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED FACTOR & MARGIN CALCULATION ...................................................................................…

Text truncated - open the document above for the full version.

Appendix A: 20dB Emission Bandwidth Test Result TestMode Antenna Channel 20db EBW[MHz] Limit[MHz] Verdict DH1 Ant1 2402 1.032 --- PASS 2441 1.032 --- PASS 2480 1.029 --- PASS 2DH1 Ant1 2402 1.356 --- PASS 2441 1.356 --- PASS 2480 1.356 --- PASS 3DH1 Ant1 2402 1.350 --- PASS 2441 1.350 --- PASS 2480 1.350 --- PASS Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 2DH1_Ant1_2402 2DH1_Ant1_2441 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 3DH1_Ant1_2480 Appendix B: Maximum conducted Peak output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict DH1 Ant1 2402 -0.75 <=20.97 PASS 2441 -0.92 <=20.97 PASS 2480 -0.88 <=20.97 PASS 2DH1 Ant1 2402 1.28 <=20.97 PASS 2441 1.16 <=20.97 PASS 2480 1.14 <=20.97 PASS 3DH1 Ant1 2402 1.83 <=20.97 PASS 2441 1.66 <=20.97 PASS 2480 1.70 <=20.97 PASS Appendix C: Carrier frequency separation Test Result TestMode Antenna Channel Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop 1 >=0.688 PASS 2DH1 Ant1 Hop 1 >=0.904 PASS 3DH1 Ant1 Hop 1.003 >=0.900 PASS Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Appendix D: Time of occupancy Test Result Test Mode AntennaChannel Burst Width [ms] Total Hops [Num] Result[s]Limit[s] Verdict DH1 Ant1 Hop 0.37 320 0.120 <=0.4 PASS DH3 Ant1 Hop 1.64 160 0.262 <=0.4 PASS DH5 Ant1 Hop 2.90 110 0.319 <=0.4 PASS 2DH1 Ant1 Hop 0.39 320 0.126 <=0.4 PASS 2DH3 Ant1 Hop 1.64 160 0.262 <=0.4 PASS 2DH5 Ant1 Hop 2.91 110 0.320 <=0.4 PASS 3DH1 Ant1 Hop 0.37 320 0.120 <=0.4 PASS 3DH3 Ant1 Hop 1.65 160 0.263 <=0.4 PASS 3DH5 Ant1 Hop 2.90 110 0.319 <=0.4 PASS Note 1：A period time=0.4*79=31.6(S), Result=Burst Width*Total Hops Note 2: Total Hops=Hopping Number in 3.16s*10 Note 3: Hoping Number in 3.16s=Total of highest signals in 3.16s (Second high signals were other channel) Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop DH5_Ant1_Hop 2DH1_Ant1_Hop 2DH3_Ant1_Hop 2DH5_Ant1_Hop 3DH1_Ant1_Hop 3DH3_Ant1_Hop 3DH5_Ant1_Hop Appendix E: Number of hopping channels Test Result TestMode Antenna Channel Result[Num] Limit[Num] Verdict DH1 Ant1 Hop 79 >=15 PASS 2DH1 Ant1 Hop 79 >=15 PASS 3DH1 Ant1 Hop 79 >=15 PASS Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Appendix F:Band edge measurements Test Graphs DH1_Ant1_Low_2402 DH1_Ant1_High_2480 DH1_Ant1_Low_Hop_2402 DH1_Ant1_High_Hop_2480 2DH1_Ant1_Low_2402 2DH1_Ant1_High_2480 2DH1_Ant1_Low_Hop_2402 2DH1_Ant1_High_Hop_2480 3DH1_Ant1_Low_2402 3DH1_Ant1_High_2480 3DH1_Ant1_Low_Hop_2402 3DH1_Ant1_High_Hop_2480

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)