2AFWN-ELM35R6W4AESL Label

Newton Pro ESL Datasheet v3.0.0 96 / 74 7.2. Proper Storing and Disposing of Lithium Batteries - To minimize risk of fire and explosion of batteries, be sure to follow the instructions below. - Proper use of battery tray is outlined below. With batteries properly placed into each tray slot → stack the trays in the same orientation → use an empty tray on the top stack → tape the stack together to avoid falling apart. Newton Pro ESL Datasheet v3.0.0 97 / 74 - Follow local regulations for proper battery disposal guideline.

Newton Pro ESL Datasheet v3.0.0 1 / 74 Newton Pro Electronic Shelf Label Datasheet 11/02/2026 Summary This datasheet presents the general performance and specifications of Newton Pro Label for SOLUM Electronic Shelf Label (ESL) System. © SOLUM. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of SOLUM. This document is subject to change without notice. Newton Pro ESL Datasheet v3.0.0 2 / 74 Newton Pro ESL Datasheet v3.0.0 3 / 74 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR SOLUM REPRESENTATIVE FOR A COPY. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. SOLUM AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL SOLUM OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF SOLUM OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. SOLUM and the SOLUM logo are trademarks or registered trademarks of SOLUM and/or its affiliates in KOREA and other countries. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between SOLUM and any other company. © 2016-2026 SOLUM Co. Ltd, Inc. All rights reserved. Newton Pro ESL Datasheet v3.0.0 4 / 74 Table of Contents 1. Preface ............................................................................................................................................ 9 1.1. About This Guide .................................................................................................................. 9 1.2. Audience................................................................................................................................ 9 1.3. Abbreviations and Acronyms ............................................................................................... 9 2. Overview ....................................................................................................................................... 10 3. Specification ..................................................................................................................................11 3.1. Product Specification ........................................................................................................... 11 3.2. Radio (RF) Specification ...................................................................................................... 20 3.3. NFC Specification ................................................................................................................ 20 3.4. Features ............................................................................................................................... 21 3.5. Mechanical Drawing ........................................................................................................... 22 3.5.1. 1.6”V ....................................................................................................................... 22 3.5.2. 1.6”H ...................................................................................................................... 23 3.5.3. 2.2” ......................................................................................................................... 24 3.5.4. 2.2”F ....................................................................................................................... 25 3.5.5. 2.6” ......................................................................................................................... 26 3.5.6. 2.6”F ....................................................................................................................... 27 3.5.7. 2.7” ......................................................................................................................... 28 3.5.8. 2.9” ......................................................................................................................... 29 3.5.9. 2.9”F ....................................................................................................................... 30 3.5.10. 3.5” (3.45”) ............................................................................................................. 31 3.5.11. 3.5”F (3.45”) ........................................................................................................... 32 Newton Pro ESL Datasheet v3.0.0 5 / 74 3.5.12. 3.5” (3.52”) ........................................…

Text truncated - open the document above for the full version.

MODEL ATTESTATION COVER LETTER Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Mar 03, 2026 Confidentiality Request regarding application for certification of FCC ID : 2AFWN-ELM35R6W4A Dear Examiner, Addition of model number as follow: - Basic model number : ELM35R6W4A - Series model number : ELM35R6B4A, ELM35R6C4A, ELF35R6WMA, ELF35R6BMA a. The alternative model ELM35R6B4A, ELM35R6C4A, ELF35R6WMA, ELF35R6BMA are same as basic model ELM35R6W4A except for the following changes: 1. Model name 2. Difference in operation commands b. The transmitter schematic and circuits including the antenna are electrically identical. ELM35R6W4A ELM35R6B4A ELM35R6C4A ELF35R6WMA ELF35R6BMA Sincerely, Ki Dong Lee SOLUM CO.,LTD.

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Mar 03, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AFWN-ELM35R6W4A SOLUM CO.,LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. SOLUM CO.,LTD. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, NAME: Ki Dong Lee Applicant: SOLUM CO.,LTD. Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Mar 03, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AFWN-ELM35R6W4A SOLUM CO.,LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, NAME: Ki Dong Lee Applicant: SOLUM CO.,LTD.

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Mar 03, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AFWN-ELM35R6W4A Applicant FRN: 0025024894 SOLUM CO.,LTD. certifies that, as of the date of the filing of the application, SOLUM America INC is our designated U.S. agent for service of process for the above referenced FCC ID. SOLUM CO.,LTD. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SOLUM America INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: SOLUM America INC FRN (If the U.S. agent has an FRN): 0033504820 Address: 65 Challenger rd, Suite 220 Ridgefield park, NJ 07660, USA Contact Person: Hyunseok Jeong Tel.: 201 310 5242 Email: [email protected] Sincerely, SOLUM CO.,LTD. SOLUM America INC Ki Dong Lee Hyunseok Jeong

Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Date : Mar 03, 2026 Confidentiality Request regarding application for certification of FCC ID : 2AFWN-ELM35R6W4A Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Schematics_PCB Layout Parts List Operational Description Block Diagram.pdf Schematics.pdf Schematics_PCB Layout.pdf Part List.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, NAME: Ki Dong Lee Applicant: SOLUM CO.,LTD.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : Mar 03, 2026 SUBJECT: FCC Application for (FCC ID : 2AFWN-ELM35R6W4A) To Whom It May Concern: We, the undersigned, hereby authorize Seong Uk Park at CTK on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CTK on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, NAME: Ki Dong Lee Applicant: SOLUM CO.,LTD.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr EUT External Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr Label Photographs and Location Label CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr E-Label

1 | 4 E-label Declaration FCC ID: 2AFWN-ELM35R6W4A FCC §2.935 Electronic labeling of radiofrequency devices. (a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device. Information On e-label In Manual FCC ID number Yes Yes 15.19 Statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class B Digital Device user manual statement - Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment - Yes Image of the e-label screen is provided below: 2 | 4 (b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related website, if such a web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification. The user manual presents: 3 | 4 (c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access. We can access it in two steps. (d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification; Yes (e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The user cannot modify the e-label information. 4 | 4 (f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled, either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a webpage that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCC’s equipment authorization requirements. Devices can be labeled with a stick-on label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The FCC ID is present on the product packaging. Regards, Date : Mar 03, 2026 NAME: Ki Dong Lee Applicant: SOLUM CO.,LTD.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr EUT Internal Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.elementkorea.kr NFC Antenna(RX) 2.4GHz SRD Antenna

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Page 1 of 2 RF EXPOSURE EVALUATION FCC ID : 2AFWN-ELM35R6W4A Standard Requirement The following FCC Rule Parts and procedures are applicable : Part 1.1310 Radiofrequency radiation exposure limits Part 2.1091 Radiofrequency radiation exposure evaluation : Mobile device Table 1 below sets forth limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields. Table 1—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Page 2 of 2 MPE calculation S = EIRP / (4πR 2 ) Where S : Power density (mW/cm 2 ) EIRP : P + T + G (dBm) P : Maximum transmitter power (dBm) G : Antenna gain (dBi) R : distance to the centre of radiation of the antenna (cm) T : Power tolerance (dB) Safety distance(R) : 20 cm Mode Conducted Output power [dBm] Antenna Gain [dBi] Power tolerance [dB] Power density [mW/cm 2 ] Limit [mW/cm 2 ] GFSK 2.686 3.69 + 1.5 0.001 1 Conclusion This confirms compliance to the required Radio frequency radiation exposure limit.

TEST REPORT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2026-00369 Page (1) / (28) pages [QF-QP15-07] Ver.04 Project Number: CTK-R-2026-00321 1. Applicant ◦ Name : SOLUM CO.,LTD. ◦ Address : 7F, 2354, Yonggu-daero, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea ◦ Date of Receipt : 2026-01-16 2. Manufacturer ◦ Name : SOLUM CO.,LTD. 3. Use of Report : For FCC Certification & ISED Certification 4. Test sample / Model : ESL Label / ELM35R6W4A 5. Date(s) of test : 2026-01-28 to 2026-02-04 6. Test Standard (Method) used : FCC 47 CFR part 15 subpart C 15.247, ANSI C63.10-2020, RSS-247, RSS-Gen 7. Testing Environment : refer to 7 page 8. Test Results : Compliance 9. Location of Test : Permanent Testing Lab On Site Testing (Address : 5, Dongbu-ro 221beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, 17141 Korea) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This report cannot be reproduced or copied without the written consent of CTK. Approval Tested by: Seong-uk Park (Signature) Technical Manager: Bong-seok Kim (Signature) 2026-02-10 CTK Co., Ltd. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2026-00369 Page (2) / (28) pages [QF-QP15-07] Ver.04 Project Number: CTK-R-2026-00321 REPORT REVISION HISTORY Date Revision Page No 2026-02-10 Issued (CTK-2026-00369) all This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2026-00369 Page (3) / (28) pages [QF-QP15-07] Ver.04 Project Number: CTK-R-2026-00321 CONTENTS 1. General Product Description ............................................................................................. 4 1.1 Applicant Information ............................................................................................... 4 1.2 Manufacturer Information .......................................................................................... 4 1.3 Product Information ................................................................................................ 4 1.4 Peripheral Devices ................................................................................................. 4 2. Accreditations .............................................................................................................. 5 2.1 Laboratory Accreditations and Listings .......................................................................... 5 2.2 Calibration Details of Equipment Used for Measurement .................................................... 5 3. Test Specifications ......................................................................................................... 6 3.1 Standards ............................................................................................................ 6 3.2 Mode of operation during the test ................................................................................ 7 3.3 Measurement Uncertainty ......................................................................................... 7 3.4 Test Software ........................................................................................................ 7 3.5 Testing Environment .............................................................................................. 7 4. Technical Characteristic Test ............................................................................................. 8 4.1 6dB Bandwidth & 99% Bandwidth ............................................................................... 8 4.2 Maximum peak Conducted Output Power .................................................................... 10 4.3 Power Spectral Density .......................................................................................... 12 4.4 Band Edge & Conducted Spurious emission ................................................................. 14 4.5 Radiated Emission ............................................................................................... 17 APPENDIX A – Test Equipment Used For Tests ....................................................................... 28 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 REPORT No.: CTK-2026-00369 Page (4) / (28) pages [QF-QP15-07] Ver.04 Project Number: CTK-R-2026-00321 1. General Product Description 1.1 Applicant Information Company SOLUM CO.,LTD. Contact Point 7F, 2354, Yonggu-daero, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea Contact Person Name : Ki Dong Lee E-mail : [email protected] Tel : +82-31-8006-7677 1.2 Manufacturer Information Manufacturer SOLUM CO.,LTD. Address 7F, 2354, Yonggu-daero, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea Factory #1 SOLUM VINA CO., LTD Factory #1 Address Plot B3, Ba Thien II Industrial Park, Thien Ke Ward, Binh Xuyen District, Vinh Phuc Province, VIETNAM 1.3 Product Information FCC ID 2AFWN-ELM35R6W4A IC 22800-ELM35R6W4A Product Description ESL Label Model name ELM35R6W4A Variant Model name ELM35R6B4A, ELM35R6C4A, ELF35R6WMA, ELF35R6BMA (The variant model has no technical differences from the other models, except for the model name, color variations.) Operating Frequency 2 401 MHz - 2 480 MHz RF Output Power 2.686 dBm(1.856 mW) Antenna Specification Antenna type : Pattern Antenna Peak Gain : 3.69 dBi Number of channels 80 Channel Spacing 1 MHz Type of Modulation GFSK Power Source DC 3…

Text truncated - open the document above for the full version.

ART SIGNAL Company _ Antenna Total Solution ( ART-S 2025) Ver.1 2025 3D gain Picture VSWR Solu-M Newton Pro 3.45" R25-08 #1 TEST DATA 1 2 3 4 5 Frequency [MHz] 2400 2420 2440 2460 2485 Efficiency [dB] -2.24 -2.08 -1.73 -2.08 -2.93 Efficiency [%] 59.6 61.9 67.1 62.0 50.9 Peak Gain [dB] 2.85 3.19 3.69 3.50 3.10 Directivity [dB] 5.10 5.27 5.42 5.58 6.03 Minimum Gain [dB] -7.78 -7.44 -7.13 -7.26 -7.57 ART SIGNAL Company _ Antenna Total Solution ( ART-S 2025) Ver.1 2025 2400 2420 2440 2460 2485 3D Radiation Pattern ANT DATA – 3D Radiation Pattern ART SIGNAL Company _ Antenna Total Solution ( ART-S 2025) Ver.1 2025 Measurement Procedure Network Analyzer을 이용하여 VSWR 측정 3D Chamber에 Set 거치 Program을 이용하여 Gain 측정 ART SIGNAL Company _ Antenna Total Solution ( ART-S 2025) Ver.1 2025 E5071B (Agilent) 8753ES (Agilent) Network Analyzer CTIA 3D OTA Chamber(A+Tech) Measurement Equipment

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Test Setup Photos and Configuration Radiated Electric Field Emissions [9 kHz to 30 MHz] [30 MHz to 1 GHz] CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 [1 GHz to 18 GHz] [18 GHz to 26.5 GHz] CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, 17142, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Conducted test