2AFYR-ENTELET6Tablet PC

User Manual of ENTEL eT6 Thank you for purchasing MID products. This user manual introduces every function of the MID briefly, which let you have an easy control in it and enjoy its value fully. Please read this manual carefully before use. The version number of this manual is Ver1.0. Announcements 1．Please noted that the new battery is only able to achieve the best performance after two or three charge and discharge cycles completely. 2. For the first three times charge battery, please make sure the charging time should be 8-10 hours at least. After it, the battery can be full charged about 4 hours. These make lithium battery achieved its best performance in the future. 3. To prevent data loss, it is recommended that users should be back up important data, especially before the firmware upgrade. We are not be responsible for any losses caused by data loss. 4. This machine is a high-precision electronic product, please do not disassemble by yourself. 5. Please avoid any strong beat or collide the player. 6. Avoid using the player in the following environments: high temperature, low temperature, humid, dusty, powerful magnetic field and long-term exposure under sunlight. 7. It’s allow to wipe the device's casing gently by wet cloth drying, and any other chemical solution cleaning is strictly prohibited. 8. The device can not be suffered any drip and splash, and it should not be placed near something like cups filled liquid. 9. To avoid hearing damage, please choose the appropriate volume while listening. 10. Do not alter any part of the device. 11. Please only use the batteries, chargers and accessories manufacturers allowed. It will be violate the warranty regulations or may be dangerous if you use any other ones 12. Please follow the relevant local environmental regulations to dispose the discarded device and accessories. 13. If there is any questions during using, please contact the local dealer or our company's customer service center directly. 14. All specifications or others are subject to change without notice. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Tablet PC (FCC ID: 2AFYR-ENTELET6) has also been tested against this SAR limit. The highest reported SAR values for wireless router(hotspot), and simultaneous transmission conditions are 1.397W/kg, and 1.516W/kg respectively. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Manual Catalogue: 一、Product specifications 二、Appearance and Key Description 三、Operation keys introduction 四、Getting Started （一）Open the player （二）Transfer data （三）The use of functions 1. WIFI 2. 4G(Support 3G) 3. Bluetooth 4. Play Music 5. Play video 6. Picture browsing 7. Photograph 8. Recording 9. G-SENSOR 10. Download and Use Application （四）Charging Step 1. harge the unit via MIC-USB adapter. （五）Abnormal restart 五、Frequently Asked Questions 一、Product specifications ● Model: ENTEL eT6 ● FLASH Capacity: 16GB ● DDR Capacity: 2G and 1G compatible ● USB port: micro 5PIN USB ● Display: 9.7inch (type); 2048*1536 (Display pixels) ● Battery: Rechargeable polymer lithium ion battery 8500mAh ● Size: 240mm (L) * 169.5mm (W) * 8.1mm (H) 二、Appearance and Key Description: 三、Operation keys introduction: 1. Reset button: Press the power button to force shutdown 10s 2. Power: Long press to open the device, short press to wake up the device while standby, long press to off the device. 3. Volume + / - : Short press to adjust the volume. 四、Getting Started （一）Boot device According to "Power" button in the Appearance and Keys description, long press it to turn on the device. （二）Transfer data Connect the device with computer PC through the USB cable in package, a PC with a computer connection (to open USB data connection), the need to transfer music / video / file copy in the computer's hard drive, switch to the MID disk paste can achieve data transfer. （三）The use of functions: 1. WIFI Turn on the WIFI in "Settings" menu, click …

Text truncated - open the document above for the full version.

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EUT View 3 EUT View 4 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EUT View 5 EUT View 6 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EUT View 7

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AFYR-ENTELET6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Wi-Fi/BT/GPS Ant. Receive Ant. GSM/WCDMA/LTE Ant. Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 Solder Board-Component View 1 Solder Board-Component View 2 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-1/2 FCC Part 22H&24E&27 Solder Board-Component View 3 Solder Board-Component View 4

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-6 Page 1 of 22 FCC Part 15B FCC Part 15B Measurement and Test Report For JALA ASIA LTD. SUITE 1004, 10TH FLOOR, BANK OF AMERICA TOWER, 12 HARCOURT ROAD, CENTRAL, HONGKONG FCC ID: 2AFYR-ENTELET6 Test Rule(s): FCC Part 15 Subpart B Product Description: Tablet PC Tested Model: ENTEL eT6 Report No.: STR15118054I-6 Tested Date: 2015-11-04 to 2015-11-17 Issued Date: 2015-11-18 Tested By: Vigoss Liang / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM.Test Technology Co., Ltd. Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-6 Page 2 of 22 FCC Part 15B TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 3 1.2 TEST STANDARDS ................................................................................................................................................... 4 1.3 TEST METHODOLOGY ............................................................................................................................................. 4 1.4 TEST FACILITY ....................................................................................................................................................... 4 1.5 EUT SETUP AND OPERATION MODE ...................................................................................................................... 5 1.6 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 6 3. CONDUCTED EMISSIONS .................................................................................................................................... 7 3.1 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 3.2 TEST PROCEDURE ................................................................................................................................................... 7 3.3 BASIC TEST SETUP BLOCK DIAGRAM ..................................................................................................................... 7 3.4 ENVIRONMENTAL CONDITIONS .............................................................................................................................. 8 3.5 SUMMARY OF TEST RESULTS/PLOTS ...................................................................................................................... 8 3.6 CONDUCTED EMISSIONS TEST DATA ...................................................................................................................... 8 4. RADIATED EMISSIONS ....................................................................................................................................... 13 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................................ 13 4.2 TEST PROCEDURE ................................................................................................................................................. 13 4.3 TEST RECEIVER SETUP ......................................................................................................................................... 14 4.4 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................ 14 4.5 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 14 4.6 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 14 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I-6 Page 3 of 22 FCC Part 15B 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: JALA ASIA LTD. Address of applicant: SUITE 1004, 10TH FLOOR, BANK OF AMERICA TOWER, 12 HARCOURT ROAD, CENTRAL, HONGKONG Manufacturer: Guangzhou Shangke Information Technology Limited. Address of manufacturer: R&F To-Win Building, 12th Floor, No.30 Huaxia Road, Tianhe District, Guangzhou, Guangdong Province, China General Description of EUT Product Name: Tablet PC Trade Name: entel Model No.: ENTEL eT6 Adapter Model: TP-U25 INPUT:100-240V,50/60Hz,0.3A; OUTPUT:5V, 2.5A Hardware version: 4G008-3M-V1.0-20141219 Software version: V1.00_20150822 The EUT Main board support GSM850/900/DCS1800/PCS1900, WCDMA Band 1/2/5/8, LTE Band 4 function. It is intended for speech, Multimedia Message Service (MMS) transmission and ENTEL eT6. It is equipped with GPRS/EDGE class 12 for GSM850/900/DCS1800/PCS1900, GPS, Bluetooth and Wi-Fi functions. For more information see the following datasheet Note: The test data is gathered from a production sample provided by the manufacturer. Technical Characteristics of EUT Rated Voltage: DC 3.8V Li-ion Battery Battery Capacity: 8500mAh Rated Power: / Lowest Internal Frequency: 32.768kHz Highest Internal Frequency: 1.7GHz Classification of ITE: Class B Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR1511805…

Text truncated - open the document above for the full version.

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I -6 FCC Part 15B EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conducted Emission Test Setup Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15118054I -6 FCC Part 15B Radiation Emission Test Setup (30MHz to 1GHz)