2AFZZC3LGMobile Phone (LTE/WCDMA/GSM/BT/WIFI)

Redmi 9A User Guide Volume Buttons Power Button USB port SAT. 16 AUG. 02 48 Thank you for choosing Redmi 9A Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide MIUI Redmi 9A comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com SIM Card Tray: Micro SD Nano-SIM Nano-SIM About Dual SIM: • Dual 4G SIM is offered by select telecom operators and may not be available in all regions. • Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card. • VoLTE is only supported by telecom operators in certain regions. • System may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device. • Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot. • WARNING: Do not disassemble this device. WEEE Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification Important Safety Information Read all safety information below before using your device: • Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. • Use only authorized accessories which are compatible with your device. • This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device. • If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself. • Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations. • Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately. -Do not short circuit the battery, as this may cause overheating, burns, or other injury. -Do not place the battery in a high-temperature environment. -Overheating may cause explosion. -Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode. -Do not burn the battery, as this may cause fire or explosion. -If the battery appears deformed or damaged, stop using it immediately. • User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer. • Keep your device dry. • Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. • For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. Safety Precautions • Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments. • Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards. • Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices. • Observe all aircraft safety regulations and turn off your phone on board aircraft when required. • When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations. • To avoid being struck…

Text truncated - open the document above for the full version.

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Date: May 26, 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AFZZC3LG To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Schematic Diagram  Block Diagram  Part List  Operational Description  Tune‐up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04‐1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short‐term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04‐1705.  External Photos  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _ ___ Xiaogang Jiao [email protected]

EUT Appearance Report No.: R2004A0237 TA Technology (Shanghai) Co., Ltd. Page 1 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Appearance Report No.: R2004A0237 TA Technology (Shanghai) Co., Ltd. Page 2 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2004A0237 TA Technology (Shanghai) Co., Ltd. Page 3 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. a: EUT EUT Appearance Report No.: R2004A0237 TA Technology (Shanghai) Co., Ltd. Page 4 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Adapter 1 Adapter 2 b: Adapter EUT Appearance Report No.: R2004A0237 TA Technology (Shanghai) Co., Ltd. Page 5 of 5 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. c: USB cable Picture 1: Constituents of EUT

FCC E-Label Information A. Images of the e-label screen are provided bel。w: B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a device's menu. The actual steps are: Settings> About Phone >Certification or select Setting, then type ” Certification ” into the search bar. m1

EU TA Techno This report sh Interna B UT Appearance ology (Shang hall not be repr al photo BT/Wi‐Fi/GNS e ghai) Co., Lt roduced except S ANT td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 1 of 30 A 2/3/4G ANT EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 2 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 3 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 4 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 5 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 6 of 30

EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 7 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 8 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Pag nghai) Co., Ltd. 04A0237 ge 9 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 10 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 11 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 12 of 30

EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 13 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 14 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap Configure pproval of TA Te 1 Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 15 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 16 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 17 of 30

EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 18 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 19 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 20 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 21 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 22 of 30

EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 23 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 24 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 25 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 26 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 27 of 30

EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 28 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 29 of 30 EU TA Techno This report sh UT Appearance ology (Shang hall not be repr e ghai) Co., Lt roduced except td. tin full, without C t the written ap Configure 2 pproval of TA Te 2 Re echnology (Shan eport No.: R200 Page nghai) Co., Ltd. 04A0237 e 30 of 30

SAR TEST REPORT Applicant Xiaomi Communications Co., Ltd. FCC ID 2AFZZC3LG Product Mobile Phone Brand Redmi Model M2006C3LG Report No. R2004A0237-S2V1 Issue Date June 11, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528- 2013, ANSI C95.1: 1992,IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 2 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2. Test facility ............................................................................................................................ 4 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 5 2 Statement of Compliance ............................................................................................................ 6 3 Description of Equipment under Test ......................................................................................... 8 4 Test Specification, Methods and Procedures .......................................................................... 10 5 Operational Conditions during Test........................................................................................... 11 5.1 Test Positions ....................................................................................................................... 11 5.1.1 Against Phantom Head ................................................................................................. 11 5.1.2 Body Worn Configuration ............................................................................................ 11 5.1.3 Phablet SAR test considerations ............................................................................... 12 5.2 Measurement Variability ..................................................................................................... 13 5.3 Test Configuration ............................................................................................................... 14 5.3.1 GSM Test Configuration ............................................................................................... 14 5.3.2 UMTS Test Configuration ............................................................................................. 14 5.3.3 LTE Test Configuration ................................................................................................. 18 5.3.4 Additional requirements for TDD LTE specification ............................................. 19 5.3.5 Wi-Fi Test Configuration .............................................................................................. 22 5.3.7 Proximity sensor& Receiver Power reduction information ......................................... 23 6 SAR Measurements System Configuration .............................................................................. 30 6.1 SAR Measurement Set-up .................................................................................................. 30 6.2 DASY5 E-field Probe System ............................................................................................. 31 6.3 SAR Measurement Procedure ............................................................................................ 32 7 Main Test Equipment .................................................................................................................. 34 8 Tissue Dielectric Parameter Measurements & System Verification ....................................... 36 8.1 Tissue Verification .............................................................................................................. 36 8.2 System Performance Check ............................................................................................... 38 8.3 SAR System Validation ....................................................................................................... 40 9 Normal and Maximum Output Power ........................................................................................ 41 9.1 GSM Mode ............................................................................................................................ 41 9.2 WCDMA Mode ...................................................................................................................... 44 9.3 LTE Mode ............................................................................................................................. 46 9.4 WLAN Mode ......................................................................................................................... 67 9.5 Bluetooth Mode ................................................................................................................... 68 10 Measured and Reported (Scaled) SAR Results ....................................................................... 69 10.1 EUT Antenna Locations ...................................................................................................... 69 10.2 Standalone SAR test exclusion considerations .....................................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 129 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 28 UMTS Band V Right Cheek Middle Date: 5/11/2020 Communication System: UID 0, WCDMA Band 5; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 837 MHz; σ = 0.925 S/m; εr = 43.198; ρ = 1000 kg/m3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Right Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(9.20, 9.20, 9.20); Calibrated: 6/19/2019; Electronics: DAE4 SN1317; Calibrated: 10/23/2019 Phantom: SAM1; Type: SAM; Serial: TP-1534 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Right Cheek Middle/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.160 W/kg Right Cheek Middle/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.963 V/m; Power Drift = 0.073 dB Peak SAR (extrapolated) = 0.196 W/kg SAR(1 g) = 0.156 W/kg; SAR(10 g) = 0.120 W/kg Maximum value of SAR (measured) = 0.164 W/kg FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 130 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 29 UMTS Band V Back Side Middle(Distance 15mm) Date: 5/11/2020 Communication System: UID 0, WCDMA Band 5; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 837 MHz; σ = 0.925 S/m; εr = 43.198; ρ = 1000 kg/m3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(9.20, 9.20, 9.20); Calibrated: 6/19/2019; Electronics: DAE4 SN1317; Calibrated: 10/23/2019 Phantom: SAM1; Type: SAM; Serial: TP-1534 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Back Side Middle/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.132 W/kg Back Side Middle/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.14 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.162 W/kg SAR(1 g) = 0.128 W/kg; SAR(10 g) = 0.097 W/kg Maximum value of SAR (measured) = 0.135 W/kg FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 131 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 30 UMTS Band V Bottom Edge Middle (Distance 10mm) Date: 5/11/2020 Communication System: UID 0, WCDMA Band 5; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 837 MHz; σ = 0.925 S/m; εr = 43.198; ρ = 1000 kg/m3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(9.20, 9.20, 9.20); Calibrated: 6/19/2019; Electronics: DAE4 SN1317; Calibrated: 10/23/2019 Phantom: SAM1; Type: SAM; Serial: TP-1534 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Bottom Edge Middle/Area Scan (4x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.319 W/kg Bottom Edge Middle/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.20 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.619 W/kg SAR(1 g) = 0.322 W/kg; SAR(10 g) = 0.185 W/kg Maximum value of SAR (measured) = 0.356 W/kg FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 132 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 31 LTE Band 2 1RB Left Cheek High Date: 5/12/2020 Communication System: UID 0, LTE (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.408 S/m; εr = 38.294; ρ = 1000 kg/m3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Left Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(7.79, 7.79, 7.79); Calibrated: 6/19/2019; Electronics: DAE4 SN1317; Calibrated: 10/23/2019 Phantom: SAM1; Type: SAM; Serial: TP-1534 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Left Cheek High/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.208 W/kg Left Cheek High/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.981 V/m; Power Drift = 0.080 dB Peak SAR (extrapolated) = 0.314 W/kg SAR(1 g) = 0.204 W/kg; SAR(10 g) = 0.126 W/kg Maximum value of SAR (measured) = 0.221 W/kg FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 133 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Plot 32 LTE Band 2 1RB Back Side High(Distance 15mm) Date: 5/12/2020 Communication System: UID 0, LTE (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.408 S/m; εr = 38.294; ρ = 1000 kg/m3 Ambient Temperature:22.3 °C Liquid Temperature: 21.5°C Phantom section: Flat Section DASY5 Configuration: Sensor-Surface: 1.4mm (Mechanical Surface Detection) Probe: EX3DV4 - SN3677; ConvF(7.79, 7.79, 7.79); Calibrated: 6/19/2019; Electronics: DAE4 SN1317; Calibrated: 10/23/2019 Phantom: SAM1; Type: SAM; Serial: TP-1534 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Back Side High/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.433 W/kg Back Side High/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.7…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 168 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 169 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 170 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 171 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 172 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. FCC SAR Test Report Report No.: R2004A0237-S2V1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 173 of 209 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. ANNEX F: D1750V2 Dipole Calibration Certificate FCC SAR Test Report Report No.: R20…

Text truncated - open the document above for the full version.