2AFZZPCD1GMobile Phone with GSM, WCDMA, LTE, 5GNR, Bluetooth, WIFI and NFC

POCO Quick Start Guide and Warranty Card Thank you for choosing POCO Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide About SIM: Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot. WARNING: Do not disassemble this device. WEEE Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification Important Safety Information Read all safety information below before using your device: • Use of unauthorized cables, power adapters, or batteries can cause fire explosion, electric shock, pose other risks, or damage the device. • This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device. • If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself. • Charge this device only with the included or authorized cable and power adapter.Use only authorized accessories which are compatible with your device. • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations. • Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately. -Do not short circuit the battery, as this may cause overheating, burns, or other injury. -Do not place the battery in a high-temperature environment. -Overheating may cause explosion. -Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode. -Do not burn the battery, as this may cause fire or explosion. • User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer. • Keep your device dry. • Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. • For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. Security Statement Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. Disclaimer This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device. POCO WARRANTY NOTICE THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS CONVEYED BY LAWS OF YOUR COUNTRY, PROVINCE OR STATE. INDEED, IN SOME COUNTRIES, PROVINCES OR STATES, CONSUMER LAW MAY IMPOSE A MINIMUM WARRANTY PERIOD. OTHER THAN AS PERMITTED BY LAW, XIAOMI DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS WE INVITE YOU TO CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. This contractual Warranty applies only to the hardware components of POCO Product (hereafter “Product”) as originally supplied and does not apply to any software or other equipment that are owned by Xiaomi or third parties for which an end-user license agreement or separate warranty/ guarantee statements or exclusions are provided or intended to apply. LIMITED PRODUCT WARRANTY Xiaomi warrants the original purchaser that your POCO Product shall be free from defects in materials and workmanship under normal use during the warranty period. Except otherwise provided by applicable law, the warranty lasts and is provided for one (1) year for host unit, six (6) months for removable battery and charger, one (1) year for irremovable battery, three (3) months for Earphone if applicable from the date of purchase. Notwithstanding the foregoing clause, Xiaomi does not exclude, limit or suspend the minimum legal warranty period imposed by applicable law. Xiaomi does not warrant the operation of the Product will be uninterrupted or error-free. REMEDIES If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the Product at no charge, use new or refurbished replacement parts, English (2) replace the Product with a new or refurbished product, or (3) refund the Product, excluding potential shipping…

Text truncated - open the document above for the full version.

POCO X6 5G Safety Information SAT. 16 AUG. 02 48 EU Regulations RED Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 23122PCD1G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www. mi.com/en/certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/ uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Head: 0.999 W/Kg, Body: 0.999 W/Kg (5 mm distance). Frequency Bands and Power This mobile phone offers the following frequency bands in EU areas only and maximum radio- frequency power: GSM 900: 35.5 dBm GSM 1800: 32.5 dBm WCDMA band 1/8: 25.7 dBm LTE band 1/3/7/8/20/28/38/40/41 : 25.7 dBm 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78: 29 dBm Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm NFC: 13.56 MHz < 42 dBuA/m at 10m 5G connection depends on country, carrier, and user environment. FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.5 cm away from the body. FCC Note Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. E-label This device has an electronic label for certification information. To access it, please go to Settings > About phone > Certification, or open Settings and type “Certification” into the search bar. Instructions for Factory reset English Path: Settings > About phone > Factory reset You can quickly erase the local data on the device via “Factory reset”. Data to be erased includes: Accounts, Contacts, Photos and videos, Apps, Backups, SD card data and Other items on this device. Model: 23122PCD1G 2312 indicates that this product will be launched after 202312. Safety Precautions • Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments. • Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wirel…

Text truncated - open the document above for the full version.

Xiaomi Communications Co., Ltd. Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 28, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AFZZPCD1G [Xiaomi Communications Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Name:  Zeng Qingyao .. Email: [email protected]...................... Signature:  . Xiaomi Communications Co., Ltd. Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 28, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AFZZPCD1G [Xiaomi Communications Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Name:  Zeng Qingyao .. Email: [email protected]...................... Signature:  .

RF_160, Issue 04 Xiaomi Communications Co., Ltd. Declaration of Authorization We Name: Xiaomi Communications Co., Ltd. Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China City: Beijing Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Branch Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: Mobile Phone Type designation: 23122PCD1G Trademark: POCO FCC ID: 2AFZZPCD1G on our behalf. Sincerely yours, Contact Person: Zengqingyao Applicant: Xiaomi Communications Co., Ltd. Phone: 010-60606666-8088 E-Mail: [email protected] Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Date: November 30, 2023 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AFZZPCD1G To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ___ _ Zengqingyao [email protected]

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing China 100085 Tel: 010 6060 6666; Fax: 010 6060 6666 Date: October 16, 2023 Declaration of Hardware Differences in Tested Devices We, Xiaomi Communications Co., Ltd, declare on our sole responsibility for the product change of 23122PCD1G Global to 2312DRA50G Global version as below: 1. Purpose of the change RF HW Part: A. The NFC IC is different： a) 23122PCD1G use：SN110T b) 2312DRA50G use：SN110U B. The IC part of WIFI 2.4G is different. Camera HW Part: a) 23122PCD1G back camera use the 64m b) 2312DRA50G back camera use the 200m C. Other： a) Battery cover is different：23122PCD1G is plastic，and 2312DRA50G is glass. All of these changes listed above have been applied to the samples used for lab tests. Sincerely yours, -------------------- Company: Xiaomi Communications Co., Ltd Tel: 086-13266666295 Fax: 010-60606666 E-Mail: [email protected]

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Statement We, Xiaomi Communications Co., Ltd., Model name: 23122PCD1G, FCC ID: 2AFZZPCD1G, states that our device is a GSM/WCDMA/LTE/5G NR Mobile Phone with WLAN 2.4GHz(Channel 1~11)/5GHz/NFC, Bluetooth functionality. The hardware supports LTE Band 40&NR Band n40, but they will be disabled by software and are not available in US market. ___ _ Zengqingyao [email protected]

Xiaomi Communications Co.,Ltd #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:2AFZZPCD1G (1) DFS Device -- Master, Client with Radar detection capability , ■ Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 2422 – 2452 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 5745 – 5825 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 5755 – 5795 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 5180 – 5240 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 5190 – 5230 MHz ■ Yes, No ■ Yes, No ■Yes, No Yes, ■ No 5260 – 5320 MHz Yes, ■ No ■ Yes, No Yes, ■ No Yes, ■ No 5270 – 5310 MHz Yes, ■ No ■ Yes, No Yes, ■ No Yes, ■ No 5500 – 5700 MHz Yes, ■ No ■ Yes, No Yes, ■ No Yes, ■ No 5510 – 5670 MHz Yes, ■ No ■ Yes, No Yes, ■ No Yes, ■ No (3) Country code selection ability - Yes , ■ No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement - ■ Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices ■ A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , ■ No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Xiaomi Communications Co., Ltd. Printed Name:Zengqingyao Position：Certification Director

Page 1 of 7 1 Photographs - EUT Constructional Details Model No.(EUT): 23122PCD1G FCC ID: 2AFZZPCD1G Page 2 of 7 Page 3 of 7 Page 4 of 7 Page 5 of 7 Model Name: MDY-12-EJ Brand Name: MI Manufacturer: Salcomp Input: 100-240V～, 50/60Hz,1.7A Normal Output: 5V⎓3A Fast Output: 5-20V⎓6.2-3.25A(67W Max) Page 6 of 7 Model Name: MDY-15-EV Brand Name: MI Manufacturer: Chenyang Input: 100-240V～, 50/60Hz,1.7A Normal Output: 5V⎓3A Fast Output: 5-20V⎓6.2-3.25A(67W Max) Page 7 of 7 Model Name: L26260 Brand Name: MI Model Name: B26260 Brand Name: MI

Page 1 of 10 1 Photographs - EUT Constructional Details Model No.(EUT): 23122PCD1G FCC ID: 2AFZZPCD1G ANT location Page 2 of 10 Page 3 of 10 Page 4 of 10 Page 5 of 10 Page 6 of 10 Page 7 of 10 Page 8 of 10 Page 9 of 10 Model Name: BM5V Rated capacity: 5020mAh Brand Name:MI Manufacturer: NVT Page 10 of 10 Model Name: BM5V Rated capacity: 5020mAh Brand Name:MI Manufacturer: Sunwoda

ReportNo.: SEWM2309000395RG09 AppendixA DetailedSystemCheckResults 1.SystemPerformanceCheck SystemPerformanceCheck13MHzHead SystemPerformanceCheck750MHzHead SystemPerformanceCheck835MHzHead SystemPerformanceCheck1750MHzHead SystemPerformanceCheck1900MHzHead SystemPerformanceCheck2450MHzHead SystemPerformanceCheck2600MHzHead SystemPerformanceCheck3500MHzHead SystemPerformanceCheck3900MHzHead SystemPerformanceCheck5250MHzHead SystemPerformanceCheck5600MHzHead SystemPerformanceCheck5750MHzHead Date: 2023-09-28 Test Laboratory: SGS-SAR Lab System Check_Head_13MHz DUT: CLA-13; Type: Dipole; Serial: 1032 Communication System: UID 0, CW (0); Frequency: 13 MHz;Duty Cycle: 1:1 Medium: HSL_13;Medium parameters used: f = 13 MHz; σ = 0.751 S/m; ε r = 54.9; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration:  Probe: EX3DV4 - SN3793; ConvF(15.3, 15.3, 15.3); Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1324; Calibrated: 2022-10-17  Phantom: SAR 8-2; Type: QDOVA002AA; Serial: TP:1143  DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.142 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.04 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.187 W/kg SAR(1 g) = 0.106 W/kg; SAR(10 g) = 0.067 W/kg Maximum value of SAR (measured) = 0.153 W/kg 0 dB = 0.153 W/kg = -8.15 dBW/kg Date: 2023-09-25 Test Laboratory: SGS-SAR Lab System Performance Check 750 MHz Head DUT: D750V3; Type: Dipole; Serial: 1210 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL750;Medium parameters used: f = 750 MHz; σ = 0.891 S/m; ε r = 42.55; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration:  Probe: EX3DV4 - SN3789; ConvF(9.09, 9.09, 9.09); Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770  DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.88 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 45.85 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.74 W/kg SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.46 W/kg Maximum value of SAR (measured) = 3.20 W/kg 0 dB = 3.20 W/kg = 5.05 dBW/kg Date: 2023-09-28 Test Laboratory: SGS-SAR Lab System Performance Check 835 MHz Head DUT: D835V2; Type: Dipole; Serial: 4d161 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL835;Medium parameters used: f = 835 MHz; σ = 0.893 S/m; ε = 43.012; ρ = 1000 r 3 kg/m Phantom section: Flat Section  DASY 5 Configuration: Probe: EX3DV4 -  SN3789; ConvF(8.76, 8.76, 8.76); Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.10 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.90 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 3.88 W/kg SAR(1 g) = 2.56 W/kg; SAR(10 g) = 1.67 W/kg Maximum value of SAR (measured) = 3.26 W/kg 0 dB = 3.26 W/kg = 5.13 dBW/kg Date: 2023-09-24 Test Laboratory: SGS-SAR Lab System Performance Check 1750 MHz Head DUT: D1750V2; Type: Dipole; Serial: 1038 Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL1750;Medium parameters used: f = 1750 MHz; σ = 1.34 S/m; ε = 40.19; ρ = 1000 r 3 kg/m Phantom section: Flat Section  DASY 5 Configuration: Probe: EX3DV4 -  SN3789; ConvF(7.65, 7.65, 7.65); Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 11.0 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 80.91 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 15.1 W/kg SAR(1 g) = 8.4 W/kg; SAR(10 g) = 4.5 W/kg Maximum value of SAR (measured) = 11.7 W/kg 0 dB = 11.7 W/kg = 10.68 dBW/kg Date: 2023-09-30 Test Laboratory: SGS-SAR Lab System Performance Check 1950 MHz Head DUT: D1900V3; Type: Dipole; Serial: 1218 Communication System: UID 0, CW (0); Frequency: 1950 MHz;Duty Cycle: 1:1 Medium: HSL1900;Medium parameters used: f = 1950 MHz; σ = 1.411 S/m; ε = 38.862; ρ = 1000 r 3 kg/m Phantom section: Flat Section  DASY 5 Configuration: Probe: EX3DV4 -  SN3982; ConvF(8.49, 8.49, 8.49); Calibrated: 2023-01-06  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 14.6 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 89.97 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.65 W/kg; SAR(10 g) = 5.08 W/kg Maximum value of SAR (measured) = 14.7 W/kg 0 dB = 14.7 W/kg = 11.67 dBW/kg Date: 2023-10-01 Test Laboratory: SGS-SAR Lab System Performance Check 2450MHz Head DUT: D2450V2; Type: Dipole; Serial: 922 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL2450;Medium parameters used: f = 2450 MHz; σ = 1.781 S/m; ε = 40.172; ρ = 1000 r 3 kg/m …

Text truncated - open the document above for the full version.

Report No.: SEWM2309000395RG09 AppendixB DetailedTest Results 1. GSM GSM850for Head & Body GSM1900for Head & Body 2. WCDMA WCDMABand II for Head & Body WCDMABand IV for Head & Body WCDMABand V for Head & Body 3. LTE LTE Band 2 for Head & Body LTE Band 4 for Head & Body LTE Band 7 for Head & Body LTE Band 12 for Head & Body LTE Band 13 for Head & Body LTE Band 26 for Head & Body LTE Band 41 for Head & Body 4. 5G NR 5G NR n5 for Head & Body 5G NR n7 for Head & Body 5G NR n41 for Head & Body 5G NR n66 for Head & Body 5G NR n77(3450~3550)for Head & Body 5G NR n77(3700~3980)for Head & Body 5. WIFI WI FI 2.4G for Head & Body WI FI 5G for Head & Body 6. BT BT for Head & Body 7. NFC ReportNo.: SEWM2309000 395 RG 01 NFC for Body Date: 2023-09-28 Test Laboratory: SGS-SAR Lab 23122PCD1G GSM850 GPRS 4TS 190CH Left Cheek DUT: 23122PCD1G; Type: Mobile Phone; Serial: 867837060019848 Communication System: UID 0, GPRS/EGPRS Mode(4up) Communication System (0); Frequency: 836.6 MHz;Duty Cycle: 1:2.075 Medium: HSL835;Medium parameters used: f = 837 MHz; σ = 0.894 S/m; ε = 42.996; ρ = 1000 r 3 kg/m Phantom section: Left Section  DASY 5 Configuration: Probe: EX3DV4 -  SN3789; ConvF(8.76, 8.76, 8.76) ; Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.525 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.614 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 1.07 W/kg SAR(1 g) = 0.557 W/kg; SAR(10 g) = 0.300 W/kg Maximum value of SAR (measured) = 0.825 W/kg 0 dB = 0.825 W/kg = -0.84 dBW/kg Date: 2023-09-28 Test Laboratory: SGS-SAR Lab 23122PCD1G GSM850 GPRS 4TS 190CH Back Side 15mm DUT: 23122PCD1G; Type: Mobile Phone; Serial: 867837060019848 Communication System: UID 0, GPRS/EGPRS Mode(4up) Communication System (0); Frequency: 836.6 MHz;Duty Cycle: 1:2.075 Medium: HSL835;Medium parameters used: f = 837 MHz; σ = 0.894 S/m; ε = 42.996; ρ = 1000 r 3 kg/m Phantom section: Flat Section  DASY 5 Configuration: Probe: EX3DV4 -  SN3789; ConvF(8.76, 8.76, 8.76) ; Calibrated: 2022-09-30  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1374; Calibrated: 2023-06-05  Phantom: SAM 3; Type: QD000P40CD; Serial: TP:1770 DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.693 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.10 V/m; …

Text truncated - open the document above for the full version.