2AFZZRA68GMobile Phone with BT, WIFI, GSM, WCDMA, LTE and NFC

Redmi Quick Start Guide and Warranty Card Thank you for choosing Redmi Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide About SIM: Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot. WARNING: Do not disassemble this device. WEEE Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification Important Safety Information Read all safety information below before using your device: • Use of unauthorized cables, power adapters, or batteries can cause fire explosion, electric shock, pose other risks, or damage the device. • This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device. • If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself. • Charge this device only with the included or authorized cable and power adapter.Use only authorized accessories which are compatible with your device. • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations. • Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately. -Do not short circuit the battery, as this may cause overheating, burns, or other injury. -Do not place the battery in a high-temperature environment. -Overheating may cause explosion. -Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode. -Do not burn the battery, as this may cause fire or explosion. • User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer. • Keep your device dry. • Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. • For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. Security Statement Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. Disclaimer This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device. XIAOMI WARRANTY NOTICE THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS CONVEYED BY LAWS OF YOUR COUNTRY, PROVINCE OR STATE. INDEED, IN SOME COUNTRIES, PROVINCES OR STATES, CONSUMER LAW MAY IMPOSE A MINIMUM WARRANTY PERIOD. OTHER THAN AS PERMITTED BY LAW, XIAOMI DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE. FOR A FULL UNDERSTANDING OF YOUR RIGHTS WE INVITE YOU TO CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. This contractual Warranty applies only to the hardware components of Xiaomi Product (hereafter “Product”) as originally supplied and does not apply to any software or other equipment that are owned by Xiaomi or third parties for which an end-user license agreement or separate warranty/ guarantee statements or exclusions are provided or intended to apply. LIMITED PRODUCT WARRANTY Xiaomi warrants the original purchaser that your Xiaomi Product shall be free from defects in materials and workmanship under normal use during the warranty period. Except otherwise provided by applicable law, the warranty lasts and is provided for one (1) year for host unit, six (6) months for removable battery and charger, one (1) year for irremovable battery, three (3) months for Earphone if applicable from the date of purchase. Notwithstanding the foregoing clause, Xiaomi does not exclude, limit or suspend the minimum legal warranty period imposed by applicable law. Xiaomi does not warrant the operation of the Product will be uninterrupted or error-free. REMEDIES If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the Product at no charge, use new or refurbished replacement parts, English (2) replace the Product with a new or refurbished product, or (3) refund the Product, excluding potential …

Text truncated - open the document above for the full version.

Redmi Note 13 Pro Safety Information To view the user guide, scan the QR code. SAT. 16 AUG. 02 48 Nano-SIM Nano-SIM Nano-SIM Micro SD EU Regulations RED Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi 23117RA68G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/ certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/ uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Head: 0.992 W/Kg, Body: 0.993 W/Kg (5 mm distance). Frequency Bands and Power This mobile phone offers the following frequency bands in EU areas only and maximum radio- frequency power: GSM 900: 35.5 dBm GSM 1800: 32.5 dBm WCDMA band 1/8: 25.7 dBm LTE band 1/3/7/8/20/28/38/40/41 : 25.7 dBm Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm NFC: 13.56 MHz < 42 dBuA/m at 10m FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.5 cm away from the body. FCC Note Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. E-label This device has an electronic label for certification information. To access it, please go to Settings > About phone > Certification, or open Settings and type “Certification” into the search bar. Instructions for Factory reset Path: Settings > About phone > Factory reset You can quickly erase the local data on the device via “Factory reset”. Data to be erased includes: English Accounts, Contacts, Photos and videos, Apps, Backups, SD card data and Other items on this device. Model: 23117RA68G 2311 indicates that this product will be launched after 202311. Safety Precautions • Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments. • Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way r…

Text truncated - open the document above for the full version.

Rev1/26/2023 XiaomiCommunicationsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:October27,2023 FCCID:2AFZZRA68G Ref:AttestationStatementsPart2.911(d)(5)(i)Filing XiaomiCommunicationsCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissoughtis not“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing XiaomiCommunicationsCo.,Ltd.certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, Signature： Printname:Zengqingyao

Xiaomi Communications Co., Ltd. POWER OF ATTORNEY DATE: 10/20/2023 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /Liu Mengting on our behalf, to apply to FCC on our equipment for FCC ID: 2AFZZRA68G. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Liu Mengting on our behalf shall have the same effect as acts of our own. Sincerely, Signature: Print name: Zeng qingyao Company: Xiaomi Communications Co., Ltd.

Xiaomi Communications Co., Ltd. Request for Confidentiality Date: _2023-10-20_ Subject: Confidentiality Request for: _____ FCC ID: 2AFZZRA68G ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Software Operational Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______ Xiaomi Communications Co., Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180_ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Xiaomi Communications Co., Ltd. Sincerely, By: Zeng qingyao (Signature/Title 2 ) (Print name)

Xiaomi Communications Co., Ltd. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AFZZRA68G (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 5150 – 5250 MHz Yes, No Yes, No Yes, No Yes, No 5250– 5350 MHz Yes, No Yes, No Yes, No Yes, No 5470– 5725 MHz Yes, No Yes, No Yes, No Yes, No 5725– 5850 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The active or passive mode was controlled by software. For non-DFS frequency used active scanning, for DFS frequency was switched to passive scanning by software Mechanism. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name: Zeng qingyao Position: Certification Director

Xiaomi Communications Co., Ltd. WIFI Declaration DATE: October 20, 2023 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, Xiaomi Communications Co., Ltd. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2AFZZRA68G. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! Sincerely, Print name: Zeng qingyao Company: Xiaomi Communications Co., Ltd.

EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 1 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Accessory Accessory Model Name Brand Name Factory Adapter 1 MDY-15-EV MI Chenyang Battery 1 BM5T MI Sunwoda Battery 2 BM5T MI Amperex Earphone EM023 MI One more USB Cable 1 K26260 MI Keli USB Cable 2 B26260 MI Fuhong USB Cable 3 L26260 MI Luxshare USB Cable 4 H26260 MI Dehong EUT Description Power Supply Battery / AC adapter Power Rating DC 3.89V from battery or DC 5V from Adapter. Connecting I/O Port(s) Please refer to the User's Manual. Memory 8G+128G; 8G+256G; 12G+256G; 12G +512G 1. There is more than one USB cable/Battery/ Memory, each one should be applied throughout the compliance test respectively, and however, only the worst case (Radiated Emission: USB cable 2/ Battery 1/ 8G+256G/1st Supply Screen; Conducted Emission: USB cable 2/Battery 1/ 8G+256G; Radiated Spurious Emission: USB cable 4/ Battery 1/ 8G+256G) will be recorded in this report. Item 1st Supply Screen 2nd Supply Screen Model WM6676Z21-F G2667FP123FF-006 Manufacturer Wuhan China Star Optoelectronics Semiconductor Display Technology Co., Ltd VisionoxTechnology Inc. Others The same EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 2 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 3 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 4 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. a: EUT EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 5 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. b: Adapter EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 6 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. c: USB Cable EUT Appearance Report No.: R2309A0986 TA Technology (Shanghai) Co., Ltd. TA-MB-01-032E Page 7 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. d: Earphone Picture 1: Constituents of EUT

E-Label ModelName:23117RA68G E-labelPath:Setting-Aboutphone-Certification

Interna TA Techno This report sh Interna al photo ology (Shang hall not be repr al photo ghai) Co., Ltd roduced except d. tin full, without TA-MB-01-03 t the written ap 33E pproval of TA Te F echnology (Shan FCC ID: 2AFZZ Pag nghai) Co., Ltd. ZRA68G ge 1 of 16 Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 2 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 3 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 4 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 5 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 6 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 7 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 8 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 9 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 10 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 11 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 12 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 13 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 14 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 15 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2AFZZRA68G TA Technology (Shanghai) Co., Ltd. TA-MB-01-033E Page 16 of 16 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

Prepared by: Wei Fangying Approved b y : Fan Guangchang TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 SAR TEST REPORT Applicant Xiaomi Communications Co., Ltd. FCC ID 2AFZZRA68G Product Mobile Phone Brand Redmi Model 23117RA68G Report No. R2309A0986-S1V2 Issue Date October 31, 2023 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in IEEE 1528-2013, ANSI C95.1: 1992, IEEE C95.1: 1991. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. SAR Test Report Report No.: R2309A0986-S1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-06-003S Page 2 of 418 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 5 1.1 Notes of the Test Report ......................................................................................................... 5 1.2 Test Facility ............................................................................................................................. 5 1.3 Testing Location ...................................................................................................................... 5 1.4 Laboratory Environment .......................................................................................................... 5 2 Statement of Compliance ............................................................................................................... 6 3 Description of Equipment Under Test ............................................................................................. 8 4 Test Specification, Methods and Procedures ............................................................................... 10 5 Operational Conditions during Test ............................................................................................... 11 5.1 Test Positions ......................................................................................................................... 11 5.1.1 Against Phantom Head ................................................................................................... 11 5.1.2 Body Worn Configuration ................................................................................................ 11 5.1.3 Phablet SAR Test Considerations ................................................................................. 12 5.2 Measurement Variability ........................................................................................................ 13 5.3 Test Configuration ................................................................................................................. 14 5.3.1 GSM Test Configuratio n ................................................................................................. 14 5.3.2 WCDMA Test Configuration ........................................................................................... 14 5.3.3 LTE Test Configuration ................................................................................................... 18 5.3.4 Additional Requirements for TDD LTE Specification .................................................. 19 5.3.5 Wi-Fi Test Configuration ................................................................................................. 22 5.3.6 Bluetooth Test Configuration .......................................................................................... 23 5.3.7 LTE CA specification ....................................................................................................... 24 5.3.8 Proximity Sensor Configuration ..................................................................................... 28 5.3.9 Procedures for Determining Proximity Sensor Triggering Distances ....................... 33 5.3.10 Procedures for Determining Device Tilt Angle Influences to Proximity Sensor Triggering .......................................................................................................................................... 37 5.3.11 SAR Detection Mechanism Specification ..................................................................... 40 6 SAR Measurements System Configuration .................................................................................. 41 6.1 SAR Measurement Set-up .................................................................................................... 41 6.2 DASY5 E-field Probe System ................................................................................................ 42 6.3 SAR Measurement Procedure .............................................................................................. 43 7 Main Test Equipment .................................................................................................................... 45…

Text truncated - open the document above for the full version.