2AFZZRAD4GMobile Phone

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 12, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AFZZRAD4G Xiaomi Communications Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, _______________ Contact Person: qingyao zeng E-mail: [email protected] Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 12, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AFZZRAD4G Xiaomi Communications Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered”equipment. Sincerely, _______________ Contact Person: qingyao zeng E-mail: [email protected]

Rev. 1/1/03 Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Tel: 010 6060 6666 Date: August 12, 2024 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AFZZRAD4G Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description Tune Up Procedure Software operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _______________ Contact Person: qingyaozeng E-mail: [email protected]

1/1 Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Tel: 010 6060 6666 Date: August 12, 2024 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : 2AFZZRAD4G To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: ⚫ External Photos ⚫ Internal Photos ⚫ Test set-up photos ⚫ Users Manual The application contains technical information, which Xiaomi Communications Co., Ltd. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: qingyaozeng E-mail: [email protected]

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Tel: 010 6060 6666 Date: August 12, 2024 Power of Attorney To whom it may concern, Please be notified that I, qingyaozeng, have designated Joey Lao in BV 7Layers Communications Technology (Shenzhen) Co.,Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Joey Lao in BV 7Layers Communications Technology (Shenzhen) Co.,Ltd on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: 2AFZZRAD4G If you have any acknowledgement and response, please send it to BV 7Layers Communications Technology (Shenzhen) Co.,Ltd directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: qingyaozeng E-mail: [email protected]

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA E-Label declare for FCC ID: 2AFZZRAD4G Dear Sir/Madam, We hereby declare that the E-label Comply with the following regulations 1. Access to regulatory information provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access 2. The FCC ID, warning statements, or other information displayed electronically in a manner that is clearly legible without the aid of magnification. 3. Users able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu 4. Not be modifiable by the user. To access it, the is Swipe down from the upper right edge of the screen to display Settings and touch the about phone-Certification regulatory labels. Figure 1 S ettings Figure 2 About phone Figure 3 If you have any questions regarding this application, please free to contact me. _______________ Contact Person: qingyaozeng E-mail: [email protected] Certification regulatory Labels

Xiaomi Communications Co., Ltd. #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District,Beijing,China10085 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA E-Label declare for FCC ID: 2AFZZRAD4G Dear Sir/Madam, We hereby declare that the E-label Comply with the following regulations 1. Access to regulatory information provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access 2. The FCC ID, warning statements, or other information displayed electronically in a manner that is clearly legible without the aid of magnification. 3. Users able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu 4. Not be modifiable by the user. To access it, the is Swipe down from the upper right edge of the screen to display Settings and touch the about phone-Certification regulatory labels. Figure 1 S ettings Figure 2 About phone Figure 3 If you have any questions regarding this application, please free to contact me. _______________ Contact Person: qingyaozeng E-mail: [email protected] Certification regulatory Labels

FCC SAR Test Report Report Format Version 5.0.0Page No. : 1 of 112 Report No. : A240618W001SA02Issued Date : Aug. 24, 2024 FCC SAR Test Report Report No. : A240618W001SA02 Applicant : #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085 Address : Xiaomi Communications Co., Ltd. Manufacturer : #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085 Address : #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085 Product : Mobile Phone FCC ID : 2AFZZRAD4G Brand : Redmi Model No. : 24094RAD4G Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 / KDB 248227 D01 v02r02 KDB 447498 D04 v01 / KDB 648474 D04 v01r03 / KDB 941225 D01 v03r01 KDB 941225 D05 v02r05 / KDB 941225 D06 v02r01 Sample Received Date : Jul. 19, 2024 Date of Testing : Jun. 21, 2024 ~ Aug. 24, 2024 FCC Designation No. : CN1325 FCC Site Registration No. : 434559 CERTIFICATION: The above equipment has been tested by Huarui 7layers High Technology (Suzhou) Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies. Prepared By : Approved By : Chang Gao / Engineer Peibo Sun / Manager This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about- us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 112 Report No. : A240618W001SA02 Issued Date : Aug. 24, 2024 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 Description of Equipment Under Test ......................................................................................................................................... 5 2. SAR Measurement System ................................................................................................................................................... 8 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 8 3.2 SPEAG DASY System ................................................................................................................................................. 8 3.2.1 Robot .................................................................................................................................................................. 9 3.2.2 Probes .............................................................................................................................................................. 10 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 10 3.2.4 Phantoms ......................................................................................................................................................... 11 3.2.5 Device Holder ................................................................................................................................................... 12 3.2.6 System Validation Dipoles ................................................................................................................................ 12 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 13 3.3 SAR System Verification ............................................................................................................................................ 15 3.4 SAR Measurement Procedure ................................................................................................................................... 16 3.4.1 Area & Zoom Scan Procedure .................................................................................................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 98 of 112 Report No. : A240618W001SA02 Issued Date : Aug. 24, 2024 Plot No. Band Mode Test Position Separation Distance (cm) Ch. RB# RB Offset Power State Antenna Sample Duty Cycle % Max. Tune-up Power (dBm) Measured Conducted Power (dBm) Power Drift (dB) Measured SAR-1g (W/kg) Duty Cycle Scaling Factor Tune-up Scaling Factor Scaled SAR-1g (W/kg) n41 DFT-QPSK100M Rear Face 1 518598 135 69 DSI2 Ant7 1 100 21.00 20.30 0.09 0.243 1.000 1.175 0.29 n41 DFT-QPSK100M Right Side 1 518598 135 69 DSI2 Ant7 1 100 21.00 20.30 -0.09 0.275 1.000 1.175 0.32 n41 DFT-QPSK100M Top Side 1 518598 135 69 DSI2 Ant7 1 100 21.00 20.30 -0.03 0.094 1.000 1.175 0.11 n48 DFT-QPSK100M Front Face 1 640000 1 137 DSI4 Ant2 1 100 23.50 22.55 0.18 0.361 1.000 1.245 0.45 n48 DFT-QPSK100M Rear Face 1 640000 1 137 DSI4 Ant2 1 100 23.50 22.55 0.13 0.227 1.000 1.245 0.28 n48 DFT-QPSK100M Left Side 1 640000 1 137 DSI4 Ant2 1 100 23.50 22.55 0.03 0.332 1.000 1.245 0.41 n48 DFT-QPSK100M Top Side 1 640000 1 137 DSI2 Ant2 1 100 23.50 22.55 0.14 0.175 1.000 1.245 0.22 n48 DFT-QPSK100M Front Face 1 640000 135 69 DSI4 Ant2 1 100 23.50 22.68 0.14 0.353 1.000 1.208 0.43 n48 DFT-QPSK100M Rear Face 1 640000 135 69 DSI4 Ant2 1 100 23.50 22.68 0.09 0.257 1.000 1.208 0.31 n48 DFT-QPSK100M Left Side 1 640000 135 69 DSI4 Ant2 1 100 23.50 22.68 0.06 0.332 1.000 1.208 0.40 n48 DFT-QPSK100M Top Side 1 640000 135 69 DSI2 Ant2 1 100 23.50 22.68 -0.05 0.190 1.000 1.208 0.23 n48 DFT-QPSK100M Front Face 1 643332 1 137 DSI4 Ant3 1 100 18.50 17.79 -0.18 0.208 1.000 1.178 0.24 n48 DFT-QPSK100M Rear Face 1 643332 1 137 DSI4 Ant3 1 100 18.50 17.79 -0.15 0.316 1.000 1.178 0.37 n48 DFT-QPSK100M Left Side 1 643332 1 137 DSI4 Ant3 1 100 18.50 17.79 0.18 0.630 1.000 1.178 0.74 n48 DFT-QPSK100M Top Side 1 643332 1 137 DSI2 Ant3 1 100 20.00 19.26 0.04 0.086 1.000 1.186 0.10 n48 DFT-QPSK100M Front Face 1 643332 135 69 DSI4 Ant3 1 100 18.50 17.84 0.19 0.212 1.000 1.164 0.25 n48 DFT-QPSK100M Rear Face 1 643332 135 69 DSI4 Ant3 1 100 18.50 17.84 -0.06 0.332 1.000 1.164 0.39 n48 DFT-QPSK100M Left Side 1 643332 135 69 DSI4 Ant3 1 100 18.50 17.84 0.14 0.617 1.000 1.164 0.72 n48 DFT-QPSK100M Top Side 1 643332 135 69 DSI2 Ant3 1 100 20.00 19.26 -0.10 0.075 1.000 1.186 0.09 n48 DFT-QPSK100M Front Face 2 643332 1 137 DSI2 Ant3 1 100 20.00 19.26 -0.16 0.107 1.000 1.186 0.13 n48 DFT-QPSK100M Rear Face 2 643332 1 137 DSI2 Ant3 1 100 20.00 19.26 -0.12 0.145 1.000 1.186 0.17 n48 DFT-QPSK100M Left Side 1.5 643332 1 137 DSI2 Ant3 1 100 20.00 19.26 -0.15 0.509 1.000 1.186 0.60 n48 DFT-QPSK100M Front Face 2 643332 135 69 DSI2 Ant3 1 100 20.00 19.26 0.01 0.111 1.000 1.186 0.13 n48 DFT-QPSK100M Rear Face 2 643332 135 69 DSI2 Ant3 1 100 20.00 19.26 0.18 0.152 1.000 1.186 0.18 n48 DFT-QPSK100M Left Side 1.5 643332 135 69 DSI2 Ant3 1 100 20.00 19.26 0.19 0.526 1.000 1.186 0.62 n48 DFT-QPSK100M Front Face 1 640000 1 137 DSI4 Ant5 1 100 20.00 18.92 0.09 0.259 1.000 1.282 0.33 n48 DFT-QPSK100M Rear Face 1 640000 1 137 DSI4 Ant5 1 100 20.00 18.92 -0.08 0.484 1.000 1.282 0.62 n48 DFT-QPSK100M Left Side 1 640000 1 137 DSI2 Ant5 1 100 24.00 23.04 0.12 0.400 1.000 1.247 0.50 n48 DFT-QPSK100M Right Side 1 640000 1 137 DSI2 Ant5 1 100 24.00 23.04 -0.11 0.205 1.000 1.247 0.26 n48 DFT-QPSK100M Top Side 1 640000 1 137 DSI4 Ant5 1 100 20.00 18.92 0.07 0.545 1.000 1.282 0.70 n48 DFT-QPSK100M Front Face 1 640000 135 69 DSI4 Ant5 1 100 20.00 19.05 0.18 0.265 1.000 1.245 0.33 n48 DFT-QPSK100M Rear Face 1 640000 135 69 DSI4 Ant5 1 100 20.00 19.05 0.10 0.388 1.000 1.245 0.48 n48 DFT-QPSK100M Left Side 1 640000 135 69 DSI2 Ant5 1 100 24.00 23.18 0.05 0.395 1.000 1.208 0.48 n48 DFT-QPSK100M Right Side 1 640000 135 69 DSI2 Ant5 1 100 24.00 23.18 -0.17 0.191 1.000 1.208 0.23 n48 DFT-QPSK100M Top Side 1 640000 135 69 DSI4 Ant5 1 100 20.00 19.05 -0.13 0.593 1.000 1.245 0.74 n48 DFT-QPSK100M Front Face 2 640000 1 137 DSI2 Ant5 1 100 24.00 23.04 0.14 0.267 1.000 1.247 0.33 n48 DFT-QPSK100M Rear Face 2 640000 1 137 DSI2 Ant5 1 100 24.00 23.04 -0.05 0.350 1.000 1.247 0.44 n48 DFT-QPSK100M Top Side 2 640000 1 137 DSI2 Ant5 1 100 24.00 23.04 -0.16 0.570 1.000 1.247 0.71 n48 DFT-QPSK100M Front Face 2 640000 135 69 DSI2 Ant5 1 100 24.00 23.18 -0.17 0.254 1.000 1.208 0.31 n48 DFT-QPSK100M Rear Face 2 640000 135 69 DSI2 Ant5 1 100 24.00 23.18 -0.04 0.389 1.000 1.208 0.47 n48 DFT-QPSK100M Top Side 2 640000 135 69 DSI2 Ant5 1 100 24.00 23.18 0.05 0.578 1.000 1.208 0.70 n48 DFT-QPSK100M Front Face 1 640000 1 137 DSI2 Ant7 1 100 18.50 17.10 0.05 0.118 1.000 1.380 0.16 n48 DFT-QPSK100M Rear Face 1 640000 1 137 DSI2 Ant7 1 100 18.50 17.10 -0.01 0.544 1.000 1.380 0.75 n48 DFT-QPSK100M Right Side 1 640000 1 137 DSI2 Ant7 1 100 18.50 17.10 -0.13 0.401 1.000 1.380 0.55 n48 DFT-QPSK100M Top Side 1 640000 1 137 DSI2 Ant7 1 100 18.50 17.10 0.09 0.115 1.000 1.380 0.16 n48 DFT-QPSK100M Front Face 1 640000 135 69 DSI2 Ant7 1 100 18.50 17.25 0.12 0.123 1.000 1.334 0.16 n48 DFT-QPSK100M Rear Face 1 640000 135 69 DSI2 Ant7 1 100 18.50 17.25 -0.15 0.580 1.000 1.334 0.77 n48 DFT-QPSK100M Right Side 1 640000 135 69 DSI2 Ant7 1 100 18.50 17.25 -0.05 0.459 1.000 1.334 0.61 n48 DFT-QPSK100M Top Side 1 640000 135 69 DSI2 Ant7 1 100 18.50 17.25 0.15 0.129 1.000 1.334 0.17 n48 DFT-QPSK100M Rear Face 1 641666 1 137 DSI2 Ant7 1 100 18.50 17.05 -0.12 0.705 1.000 1.396 0.98 P80 n48 DFT-QPSK100M Rear Face 1 643332 1 137 DSI2 Ant7 1 100 18.50 17.01 0.03 0.764 1.000 1.409 1.08 n48 DFT-QPSK100M Rear Face 1 640000 270 0 DSI2 Ant7 1 100 18.50 17.20 -0.14 0.589 1.000 1.349 0.79 n66 DFT-QPSK40M Front Face 1 349000 1 107 DSI3/4 Ant1 1 - 20.00 18.86 0.16 0.282 1.000 1.300 0.37 n66 DFT-QPSK40M Rear Face 1 349000 1 107 DSI3/4 Ant1 1 - 20.00 18.86 -0.02 0.396 1.000 1.300 0.51 n66 DFT-QPSK40M Left Side 1 349000 1 107 DSI2 Ant1 1 - 25.50 24.18 0.00 0.000 1.000 1.355 0.00 n66 DFT-QPSK40M Right Side 1 349000 1 107 DSI2 Ant1 1 - 25.50 24.18 0.12 0.132 1.000 1.355 0.18 P81 n66 DFT-QPSK40M Bottom Side 1 349000 1 10…

Text truncated - open the document above for the full version.

Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/14 P27 WLAN5G_802.11n-HT20_Left Tilted_Ch140 Communication System: 802.11n-HT20; Frequency: 5700 MHz;Duty Cycle: 1:1.028 Medium: HSL5G_0814 Medium parameters used: f = 5700 MHz; σ = 5.114 S/m; ε r = 34.203; ρ = 1000 kg/m 3 Ambient Temperature：23.8°C; Liquid Temperature：22.4°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(5.2, 5.2, 5.2) @ 5700 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.492 W/kg -Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.455 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.263 W/kg; SAR(10 g) = 0.078 W/kg Smallest distance from peaks to all points 3 dB below = 6.4 mm Ratio of SAR at M2 to SAR at M1 = 50.7% Maximum value of SAR (measured) = 0.539 W/kg 0 dB = 0.539 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/14 P28 WLAN5G_802.11n-HT20_Left Cheek_Ch149 Communication System: 802.11n-HT20; Frequency: 5745 MHz;Duty Cycle: 1:1.028 Medium: HSL5G_0814 Medium parameters used: f = 5745 MHz; σ = 5.14 S/m; ε r = 34.161; ρ = 1000 kg/m 3 Ambient Temperature：23.8°C; Liquid Temperature：22.4°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(5.2, 5.2, 5.2) @ 5745 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (111x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.416 W/kg -Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.334 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.97 W/kg SAR(1 g) = 0.194 W/kg; SAR(10 g) = 0.062 W/kg Smallest distance from peaks to all points 3 dB below = 6.4 mm Ratio of SAR at M2 to SAR at M1 = 49.8% Maximum value of SAR (measured) = 0.396 W/kg 0 dB = 0.396 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/1 P29 BT_GFSK_Left Cheek_Ch39 Communication System: BT; Frequency: 2441 MHz;Duty Cycle: 1:1.304 Medium: HSL2450_0801 Medium parameters used: f = 2441 MHz; σ = 1.856 S/m; ε r = 38.975; ρ = 1000 kg/m 3 Ambient Temperature：23.2°C; Liquid Temperature：22.6°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(8.2, 8.2, 8.2) @ 2441 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (91x91x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.166 W/kg -Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.682 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 0.204 W/kg SAR(1 g) = 0.099 W/kg; SAR(10 g) = 0.049 W/kg Smallest distance from peaks to all points 3 dB below = 10.8 mm Ratio of SAR at M2 to SAR at M1 = 46.5% Maximum value of SAR (measured) = 0.148 W/kg 0 dB = 0.148 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/7/28 P30 GSM850_GPRS 2Tx Slot_Rear Face_1cm_Ch189_Ant1 Communication System: GPRS 2Tx Slot; Frequency: 836.4 MHz;Duty Cycle: 1:4.15 Medium: HSL835_0728 Medium parameters used: f = 836.4 MHz; σ = 0.931 S/m; ε r = 40.31; ρ = 1000 kg/m 3 Ambient Temperature：23.5°C; Liquid Temperature：22.7°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(10.96, 10.96, 10.96) @ 836.4 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.302 W/kg -Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.73 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.467 W/kg SAR(1 g) = 0.278 W/kg; SAR(10 g) = 0.165 W/kg Smallest distance from peaks to all points 3 dB below = 15.1 mm Ratio of SAR at M2 to SAR at M1 = 59.9% Maximum value of SAR (measured) = 0.336 W/kg 0 dB = 0.336 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/7/24 P31 GSM1900_GPRS 3Tx Slot_Rear Face_1cm_Ch810_Ant1 Communication System: UID 0, GPRS11 (0); Frequency: 1909.8 MHz;Duty Cycle: 1:2.66993 Medium: HSL1950_0724 Medium parameters used: f = 1910 MHz; σ = 1.429 S/m; ε r = 39.339; ρ = 1000 kg/m 3 Ambient Temperature：23.5°C; Liquid Temperature：22.6°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(8.83, 8.83, 8.83) @ 1909.8 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.459 W/kg -Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.556 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.630 W/kg SAR(1 g) = 0.367 W/kg; SAR(10 g) = 0.191 W/kg Smallest distance from peaks to all points 3 dB below = 11.2 mm Ratio of SAR at M2 to SAR at M1 = 59.3% Maximum value of SAR (measured) = 0.457 W/kg 0 dB = 0.457 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/7/30 P32 WCDMA II_RMC 12.2K_Rear Face_1cm_Ch9400_Ant4 Communication System: WCDMA; Frequency:…

Text truncated - open the document above for the full version.

Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/1 P54 WLAN2.4G_802.11b_Rear Face_1cm_Ch6 Communication System: 802.11b; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: HSL2450_0801 Medium parameters used: f = 2437 MHz; σ = 1.853 S/m; ε r = 38.98; ρ = 1000 kg/m 3 Ambient Temperature：23.2°C; Liquid Temperature：22.6°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(8.2, 8.2, 8.2) @ 2437 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (91x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.240 W/kg -Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.740 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.307 W/kg SAR(1 g) = 0.157 W/kg; SAR(10 g) = 0.087 W/kg Smallest distance from peaks to all points 3 dB below = 14.9 mm Ratio of SAR at M2 to SAR at M1 = 48.8% Maximum value of SAR (measured) = 0.223 W/kg 0 dB = 0.223 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/12 P55 WLAN5G_802.11n-HT20_Front Face_1cm_Ch60 Communication System: 802.11n-HT20; Frequency: 5300 MHz;Duty Cycle: 1:1.028 Medium: HSL5G_0812 Medium parameters used: f = 5300 MHz; σ = 4.696 S/m; ε r = 36.22; ρ = 1000 kg/m 3 Ambient Temperature：23.5°C; Liquid Temperature：22.6°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(5.75, 5.75, 5.75) @ 5300 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.229 W/kg -Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 1.930 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.455 W/kg SAR(1 g) = 0.124 W/kg; SAR(10 g) = 0.049 W/kg Smallest distance from peaks to all points 3 dB below = 11.8 mm Ratio of SAR at M2 to SAR at M1 = 53.8% Maximum value of SAR (measured) = 0.225 W/kg 0 dB = 0.225 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/13 P56 WLAN5G_802.11n-HT20_Rear Face_1cm_Ch140 Communication System: 802.11n-HT20; Frequency: 5700 MHz;Duty Cycle: 1:1.028 Medium: HSL5G_0813 Medium parameters used: f = 5700 MHz; σ = 5.113 S/m; ε r = 34.194; ρ = 1000 kg/m 3 Ambient Temperature：23.1°C; Liquid Temperature：22.1°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(5.06, 5.06, 5.06) @ 5700 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) -Area Scan (101x101x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.259 W/kg -Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 0.3700 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.560 W/kg SAR(1 g) = 0.149 W/kg; SAR(10 g) = 0.055 W/kg Smallest distance from peaks to all points 3 dB below = 9.3 mm Ratio of SAR at M2 to SAR at M1 = 54.3% Maximum value of SAR (measured) = 0.275 W/kg 0 dB = 0.275 W/kg Test Laboratory: ritt 7 Layers SAR/HAC Testing Lab Date: 2024/8/14 P57 WLAN5G_802.11n-HT20_Rear Face_1cm_Ch149 Communication System: 802.11n-HT20; Frequency: 5745 MHz;Duty Cycle: 1:1.028 Medium: HSL5G_0814 Medium parameters used: f = 5745 MHz; σ = 5.14 S/m; ε r = 34.161; ρ = 1000 kg/m 3 Ambient Temperature：23.8°C; Liquid Temperature：22.4°C DASY5 Configuration: - Probe: EX3DV4 - SN7612; ConvF(5.2, 5.2, 5.2) @ 5745 MHz; Calibrated: 2024/3/20 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1633; Calibrated: 2024/3/6 - Phantom: SAM Right ; Type: QD000P40CD; Serial: TP:1611 - Measurement SW: DASY52, Ve…

Text truncated - open the document above for the full version.