2AG32MBS110096NLTE Base Station

03 All rights reserved © Baicells Technologies Co., Ltd. mBS1100 Base Station Installation Guide V100R001C00 mBS1100 Base Station Installation Guide About This Document This document is a guidance of mBS1100 hardware installation for installation personnel, which includes the preparation of installation tools and supporting material before installation, the demands of installation environment, installation of base station, connection of cable and power on. Accomplish the installation of the device according to this guide, the installation personnel can avoid potential damage to the device during the installation procedure, which makes sure the subsequent good running of the device. Copyright Notice Baicells copyrights this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of Baicells. Disclaimer This specification is preliminary and is subject to change at any time without notice. Baicells assumes no responsibility for any errors contained herein. For more information, please consult our technical engineers. Revision Record Date Version Description 30 June, 2016 01 Initial Released. 14 July, 2016 02 Update according to the hardware change. 30 Oct, 2016 03 Update according to the hardware change. Contact Us Baicells Technologies Co., Ltd.North America Address: 555 Republic Drive, Suite 200 Plano, TX 75074 E-mail: [email protected] Phone: +1-972-800-1157 Website: http://www.baicells.com/ mBS1100 Base Station Installation Guide Contents 1. Product Overview ....................................................................................................... 1 Introduction ........................................................................................................... 1 1.1 Features ................................................................................................................. 1 1.2 Appearance ............................................................................................................ 2 1.3 Technical Specification............................................................................................ 3 1.4 1.4.1 Hardware Specification ................................................................................... 3 1.4.2 Software Specification ..................................................................................... 4 1.4.3 Environment Specification ............................................................................... 5 1.4.4 FCC Compliance............................................................................................... 5 2. Out-of-Box Audit ......................................................................................................... 7 Shipping List .......................................................................................................... 7 2.1 Base Station Accessories ...................................................................................... 8 2.2 3. Installation Preparation ............................................................................................ 10 Support Materials ............................................................................................... 10 3.1 Installation Tools ................................................................................................ 10 3.2 Installation Environment....................................................................................... 11 3.3 3.3.1 Locational Requirements ............................................................................... 11 3.3.2 Environmental Requirements ........................................................................ 11 Lightening and Grounding Protection ................................................................... 11 3.4 Weatherproof Protection ..................................................................................... 12 3.5 4. Base Station Installation ............................................................................................. 13 Installation Procedure ........................................................................................ 13 4.1 Connect Cable ...................................................................................................... 13 4.2 4.2.1 Structure of Cable Connection ....................................................................... 13 4.2.2 Connect GPS Antenna.................................................................................... 14 4.2.3 Connect RF Cable .......................................................................................... 16 4.2.4 Connect Ethernet Cable ................................................................................. 16 mBS1100 Base Station Installation Guide 4.2.5 Connect Power Connector ............................................................................. 17 4.2.6 Connect Ground Cable .................................................................................. 20 Install the Mounting Bracket and Handle .............................................................. 21 4.3 Install GPS Antenna .............................................................................................. 23 4.4 Install on Pole ....................................................................................................... 25 4.5 Install on Wall ....................................................................................................... 26 4.6 Install Antenna Feeder System .............................................................................. 26 4.7 4.7.1 Install Omnidirectional Antennas ................................................................... 26 4.7.2 Install Directional Antennas ........................................................................... 28 5. Power On.................................................................................................................... 30 mBS1100 Base Stati…

Text truncated - open the document above for the full version.

Baicells Technologies Co., Ltd. Date: 9/21/2020 To whom it May concern, Statement The device (FCC ID: 2AG32MBS110096N) is based on the original device (FCC ID: 2AG32MBS110096) to reduce the power level and update the antenna gain value, and all hardware parts have not changed. FCC ID 2AG32MBS110096 (Original) 2AG32MBS110096N (New) Model mBS1100 mBS1100 Category of CBRS Category B Category B Type of Modulation QPSK, 16QAM, 64QAM QPSK, 16QAM, 64QAM Bandwidth information 10MHz/20MHz 10MHz/20MHz Max conducted output power QPSK: 29.80dBm@10MHz 26.60dBm@20MHz 64QAM: 28.77dBm@10MHz 25.53dBm@20MHz QPSK: 28.21dBm@10MHz 26.18dBm@20MHz 64QAM: 28.09dBm@10MHz 25.23dBm@20MHz Antenna information Directional antenna Gain:17 dBi Directional antenna Gain:18.5 dBi Sincerely, Baicells Technologies Co., Ltd. Signature Back Huang/ Manager Typed name and Title

mBS1100 Label Sample and Location

Appendix-mBS1100_Photos Page 4 of 9 EUT – Internal View Model mBS1105 FCC ID: 2AG32MBS110096N Appendix-mBS1100_Photos Page 5 of 9 Appendix-mBS1100_Photos Page 6 of 9

Appendix-mBS1100_Photos Page 7 of 9 Appendix-mBS1100_Photos Page 8 of 9 Appendix-mBS1100_Photos Page 9 of 9 ======End======

DEKRA Certification, Inc 405 Glenn Drive, Suite 12 Sterling · VA 20164 · United States of America Report No: (NIE) 2477bRCB.002A1 2020-Jun-19 Test report No: NIE: 2477bRCB.002A1 Test report Citizen Broadband Radio Service Test report Identification of item tested Medium Range Base Station Trademark Baicells Model and /or type reference mBS1100 Other identification of the product FCC ID: 2AG32MBS110096N Features --- Manufacturer Baicells Technologies Co., Ltd. 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, PR China, 100085. Final HW version MBS1100 D Final SW version CBSD: RTS_3.2.5 Domain Proxy: BaiOMC Rev-18822 Summary IN COMPLIANCE Approved by (name / position & signature) Gonzalo Casado (Lab Manager) Date of issue 2020-Jun-19 Report template No FDT08_22 DEKRA Certification, Inc 405 Glenn Drive, Suite 12 Sterling · VA 20164 · United States of America Report No: (NIE) 2477bRCB.002A1 Page 2 of 36 2020-Jun-19 Index Competences and guarantees ...................................................................................................... 3 General conditions ........................................................................................................................ 3 Uncertainty .................................................................................................................................... 4 Data provided by the client ........................................................................................................... 4 Usage of samples ......................................................................................................................... 4 Identification of the client .............................................................................................................. 4 Testing period and place ............................................................................................................... 4 Document history .......................................................................................................................... 4 Modifications to the First Release ................................................................................................. 5 Remarks and comments ............................................................................................................... 5 Testing verdicts ............................................................................................................................. 5 Summary ....................................................................................................................................... 5 Appendix A: Test Results .............................................................................................................. 6 Appendix B: Test Systems ............................................................................................................ 8 Test Setup Diagram ...................................................................................................................... 8 Appendix C: DUT Photographs ..................................................................................................... 9 Appendix D: CBSD/ DP Supported Features .............................................................................. 11 Appendix E: Reference Standards and Procedures ................................................................... 12 Appendix F: Test Steps ............................................................................................................... 14 DEKRA Certification, Inc 405 Glenn Drive, Suite 12 Sterling · VA 20164 · United States of America Report No: (NIE) 2477bRCB.002A1 Page 3 of 36 2020-Jun-19 Competences and guarantees DEKRA Certification Inc. is a testing laboratory accredited by A2LA (The American Association for Laboratory Accreditation), to perform the tests indicated in the Certificate 2764.01. DEKRA Certification, Inc. is a CBRS Alliance authorized test laboratory. DEKRA Certification, Inc. is a WInnForum Approved CBSD test laboratory. In order to assure the traceability to other national and international laboratories, DEKRA Certification, Inc. has a calibration and maintenance program for its measurement equipment. DEKRA Certification, Inc. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Certification, Inc. at the time of performance of the test. DEKRA Certification, Inc. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Certification, Inc. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Certification, Inc. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Certification, Inc and the Accreditation Bodies. DEKRA Certification, Inc 405 Glenn Drive, Suite 12 Sterling · VA 20164 · United States of America Report No: (NIE) 2477bRCB.002A1 Page 4 of 36 2020-Jun-19 Uncertainty Uncertainty (factor k=2) was calculated according to the DEKRA Certification, Inc internal document PODT000. Data provided by th…

Text truncated - open the document above for the full version.

TEST REPORT Reference No. .................... : WTS20S07050351W002 FCC ID ................................ : 2AG32MBS110096N Applicant ............................ : Baicells Technologies Co., Ltd. Address .............................. : 9- 10F, 1stBldg., No.81 Beiqing Road, Haidian District, Beijing, China Manufacturer .................... : Baicells Technologies Co., Ltd. Address .............................. : 9-10F, 1stBldg., No.81 Beiqing Road, Haidian District, Beijing, China Product ............................... : LTE Base Station Model(s). ............................ : mBS1100 Brand Name ....................... : Baicells Standards........................... : FCC 1.1307 Date of Receipt sample .... : 2020-06-18 Date of Test ....................... : 2020-06-18 to 2020-06-30 Date of Issue ...................... : 2020-06-31 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. P repared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Ford Wang / Project Engineer Philo Zhong / Manager Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 7 Reference No.: WTS20S07050351W002 Page 2 of 7 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................ 4 4.2 DETAILS OF E.U.T. ......................................................................................................................................... 4 4.3 TEST FACILITY ................................................................................................................................................. 4 5 TEST SUMMARY .................................................................................................................................................. 5 6 RF EXPOSURE ...................................................................................................................................................... 6 6.1 REQUIREMENTS ............................................................................................................................................... 6 6.2 THE PROCEDURES / LIMIT ................................................................................................................................ 6 6.3 MPE CALCULATION METHOD ......................................................................................................................... 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS20S07050354W002 Page 3 of 7 3 Revision History Test report No. Date of Receipt sample Date of Test Date of Issue Purpose Comment Approved WTS20S07050 351W002 2020-06-18 2020-06-18 to 2020-06-30 2020-06-31 original - Valid Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS20S07050354W002 Page 4 of 7 4 General Information 4.1 General Description of E.U.T. Product: LTE Base Station Model(s): mBS1100 Model Description: N/A Storage Location: Internal Storage 4.2 Details of E.U.T. Operation Frequency: LTE Band 48:3550MHz-3700MHz Type of Modulation: QPSK, 16QAM, 64QAM Antenna installation: Directional antenna Antenna Gain: 18.5 dBi Ratings: 48V AC/DC Adaptor 4.3 Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Services(Shenzhen) Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory `has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS20S07050354W002 Page 5 of 7 5 Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTS20S07050354W002 Page 6 of 7 6 RF Exposure Test Requirement: FCC Part 1.1307 Test Mode: The EUT work in test mode(Tx). 6.1 Requirements Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. 6.2 The procedures / limit FCC Part 1.1307: (A) Limits for Occupational / Controlled Exposure Freq…

Text truncated - open the document above for the full version.