2AG32PBS212096LTE Base Station

Nova-227 Outdoor LTE TDD eNodeB Installation Guide P/N: 1701000123 Version: 01 All rights reserved © Baicells Technologies Co., Ltd. About This Document This document is a guidance of Nova-227 hardware installation for installation personnel, including the preparation of installation tools and supporting materials, the demands for installation environment, installation procedure, cable connection and power on. Accomplish the installation of the device according to this guide, the installation personnel can avoid potential damage to the device during the installation procedure, which makes sure the subsequent good running of the device. This document suit for the models of pBS2120 and pBS1100x series eNodeBs. Copyright Notice Baicells copyrights this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of Baicells. Disclaimer This specification is preliminary and is subject to change at any time without notice. Baicells assumes no responsibility for any errors contained herein. For more information, please consult our technical engineers. Disposal of Electronic and Electrical Waste Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product. Revision Record Date Version Description 2 March, 2020 01 Initial Released of new logo. Contact Us Baicells Technologies Co., Ltd. Address: 10-11F, Bldg. A1, No.1 Zhongguancun, Yongfeng Industrial Base, Haidian Dist., Beijing, China E-mail: [email protected] [email protected] Website: http://www.baicells.com/ 1 1. Product Overview Introduction 1.1 Baicells Nova-227 is high performance outdoor micro eNodeB based on TDD LTE technology, which is developed by Baicells. The Nova-227 supports wired backhaul connections to backbone networks, and provides LTE access to user terminals, implemented voice and data service transmissions. The Nova-227 makes use of the current transmission resources to reduce the operator’s investment, implement the low-cost construction of LTE networks and enhance indoor coverage, thereby providing high-speed broadband access for users in assembly occupations. The Nova-227 can be widely used by telecom operators, broadband operators, and enterprises, etc. Features 1.2  Adopt the integration design of baseband and RF, flexible to deploy.  Based on 3GPP international standard LTE TDD technology; provide high speed data service; support a maximum transfer rate of DL: 110Mbit/s, UL: 14Mbit/s with 20MHz spectrum.  Support flexible uplink and downlink time slot ratio: 0(3:1), 1(2:2), 2(1:3), and high speed data transmission.  Support 5MHz/10MHz/15MHz/20MHz operation bandwidth.  Support internal antenna and GPS.  Support PoE+ power supply, only one Ethernet cable realize data transmission and power supply.  Security services to provide timely protection against potential security risks and illegal intrusion.  Support simple and convenient local and remote web management.  Integration as required, easy to installation and deployment, accurate coverage and improved network capacity.  Support network management functions, which includes the management, monitoring and maintenance. 2 Appearance 1.3 Table 1-1 Nova-227 Interface Description Interface Name Description ETH/PoE+ RJ-45 interface, used for data configuration or data backhaul, and PoE+ power supply. Table 1-2 Nova-227 Interface Indicators Identity Color Status Description PWR Green Steady On Power On OFF No Power Supply ACT Green Steady On The cell is activated. OFF The cell is not activated. RUN Green Fast flash: 0.125s on,0.125s off The board is loading. Slow flash: 1s on,1s off The board is normal. OFF No power input or board fault ALM Red Steady On Hardware alarm, e.g. VSWR alarm OFF No alarm 3 Technical Specification 1.4 1.4.1 Hardware Specification Item Description LTE Mode LTE TDD LTE Bands Band38/39/40/41/42/43/48 Channel Bandwidth* 5/10/15/20 MHz Output Power 24±2dBm/Ant Receive Sensitivity -100 dBm @band42/43/48 -101 dBm @band38/39/40/41 Synchronization GPS Backhaul 1 x RJ-45 Ethernet interface (1 GE) MIMO DL: 2 x 2 Dimension 248mm (H) x 248mm (W) x 80mm (D) Installation Type Pole, wall Antenna 13dBi, internal high gain antenna Horizontal beam width 65°, vertical beam width 20° Polarization mode: ±45° Overall Power < 20 W Power Supply PoE+, IEEE802.3at standard Weight About 2.0 kg * The model pBS2120 only support 10MHz/20MHz. Note: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on 5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard. 1.4.2 Software Specification Item Description LTE Standard 3GPP Release 9 Peak Rate  20 MHz: SA0: DL 50 Mbps, UL 42 Mbps SA1: DL 80 Mbps, UL 28 Mbps SA2: DL 110 Mbps, UL 14 Mbps  10MHz: SA0: DL 25 Mbps, UL 21 Mbps SA1: DL 40 Mbps, UL 14 Mbps SA2: DL 55 Mbps, UL 7 Mbps User Capacity 32 concurrent users QoS Control 3GPP standard QCI 4 Item Description Modulation UL: QPSK, 16QAM, 64QAM DL: QPSK, 16QAM, 64QAM Voice Solution CSFB, VoLTE, eSRVCC Traffic Offload LIPA (Local IP Access) SIPTO (Selected IP Traffic Offload) SON Automatic setup ANR (Automatic Neighbor Relation) PCI confliction detection Spectrum Scanning Supported UL Interference Detection Supported RAN Sharing Supported Network Management Interface Support TR069 interface protocol MTBF ≥ 150000 hours MTTR ≤ 1 hour Maintenance Support remote/local maintenance, based on SSH protocol Support remote maintenance Support online status management Support performance statistics Support failure management Support configuration management Support local or remote software upgrading and loading Support log Support connectivity diagnosis Support automatic start and configuration Support alarm reporting Support KPI Recording Support user information tracing Support signaling trace 1.4.3 Environment Specification Item Description Operat…

Text truncated - open the document above for the full version.

Rev 11/20/07 Baicells Technologies Co., Ltd. Confidentiality Request regarding application for certification of FCC ID: 2AG32PBS212096 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram 2AG32PBS212096 _Block Diagram.pdf Circuit Diagram 2AG32PBS212096_Schematics.pdf Operational Description 2AG32PBS212096 _Operational description.pdf Tune up procedure 2AG32PBS212096 _Tune up procedure.pdf BOM List 2AG32PBS212096 _BOM List.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature: Name/title: Back Huang /Certification Manager Company: Baicells Technologies Co., Ltd. Address: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China E-mail: [email protected] Tele: +86-13751023286 Date: 2020/3/25

Baicells Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for (FCC ID: 2AG32PBS212096) To Whom It May Concern: We, the undersigned, hereby authorize Mr. Zhang Shangwen from CCIC Southern Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature: Name/title: Back Huang /Certification Manager Company: Baicells Technologies Co., Ltd. Address: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China E-mail: [email protected] Tele: +86-13751023286 Date: 2020/3/25

External Photo

Internal Photo LTE ANT 0 LTE ANT 1 GPS

FCC RF Exposure FCC ID: 2AG32PBS212096 Applicant: Baicells Technologies Co., Ltd. Exposure category: General population/uncontrolled environment EUT Type: Internal Antenna Refer Standard: FCC Part 2.1091: Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands) FCC MPE Limited: Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Averaging Time (minutes) 0.3‐1.34 614 1.63 *(100) 30 1.34‐30 824/f 2.19/f *(180/f2) 30 30‐300 27.5 0.073 0.2 30 300‐1500 / / f/1500 30 1500‐100,000 / / 1.0 30 Test Data Predication of MPE limit at a given distance Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (40cm) Antenna Gain information Completely unCorrelated Antenna Gain for LTE Band48: 13dBi Maximum Conduct Power & Manufacturing tolerance Bandwidth Modulation Test Channel Chain 0 Output power (dBm/10MHz) Chain 1 Output power (dBm/10MHz) Total Power (dBm/10MHz) Total Power tolerance (dBm/10MHz) 10MHz QPSK Low 22.45 21.51 25.02 25±1 Middle 22.81 21.55 25.24 25±1 High 22.86 21.62 25.29 25±1 64QAM Low 22.43 21.59 25.04 25±1 Middle 22.14 21.19 24.70 25±1 High 22.41 22.08 25.26 25±1 Bandwidth Modulation Test Channel Chain 0 Output power (dBm/10MHz) Chain 1 Output power (dBm/10MHz) Total Power (dBm/10MHz) Total Power tolerance (dBm/10MHz) 20MHz QPSK Low 19.77 18.75 22.30 23±1 Middle 19.96 19.21 22.61 23±1 High 20.44 19.23 22.89 23±1 64QAM Low 19.77 18.72 22.29 23±1 Middle 19.71 19.02 22.39 23±1 High 20.27 19.24 22.80 23±1 Bandwidth Modulation Test Channel Chain 0 Output power (dBm/20MHz) Chain 1 Output power (dBm/20MHz) Total Power (dBm/10MHz) Total Power tolerance (dBm/10MHz) 20MHz QPSK Low 22.89 21.59 25.30 25±1 Middle 22.74 22.32 25.55 25±1 High 22.87 22.46 25.68 25±1 64QAM Low 22.74 21.64 25.24 25±1 Middle 22.67 21.57 25.17 25±1 High 22.83 22.37 25.62 25±1 Calculation results: pass Mode Maximum tune up power(dBm) ANT Gain(dBi) RF distance(cm) Result (mW/cm2) Limit (mW/cm2) LTE Band4826 13 30 0.7 1

Report No: (NIE) 02625RCB.001 Page 1 of 59 2020-Mar-25 Test report No: NIE: 02625RCB.001 Test report Test and Certification for Citizens Broadband Radio Service (CBRS): WINNF-TS-0122 Identification of item tested LTE Base Station Nova-227 Trademark Baicells Model and /or type reference pBS2120 Other identification of the product FCC ID: 2AG32PBS212096 Features Domain Proxy Category B Final HW Version: VER.A Final SW Version: DP: BaiOMC Rev-18822 CBSD: BaiBS_RTS_3.5.4. Manufacturer Baicells Technologies Co., Ltd. 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China Test method requested, standard WINNF-TS-0122 Approved by (name / position & signature) Gonzalo Casado Lab Manager Date of issue 2020-Mar-25 Report template No FDT08_22 Report No: (NIE) 02625RCB.001 Page 2 of 59 2020-Mar-25 Index Competences and guarantees ............................................................................................................ 3 General conditions ........................................................................................................................... 3 Abbreviations .................................................................................................................................. 4 Usage of samples ............................................................................................................................. 4 Supported Features .......................................................................................................................... 6 Identification of the client ................................................................................................................. 6 Testing period and place ................................................................................................................... 6 Document history ............................................................................................................................ 6 Remarks and comments .................................................................................................................... 7 List of equipment used during the test ................................................................................................ 7 Test Setup Diagram ......................................................................................................................... 7 Testing verdicts ............................................................................................................................... 7 Test Results Summary ...................................................................................................................... 8 Appendix A: Test results .................................................................................................................. 9 Appendix B: Test Cases Details ...................................................................................................... 14 Report No: (NIE) 02625RCB.001 Page 3 of 59 2020-Mar-25 Competences and guarantees DEKRA Certification Inc. is a testing laboratory competent to carry out the tests described in this report. DEKRA Certification Inc. is a testing laboratory accredited by A2LA (The American Association for Laboratory Accreditation) to perform the test indicated in the Certificate 2764.01. DEKRA Certification Inc. is a CBSD testing laboratory approved by WinnForum. In order to assure the traceability to other national and international laboratories, DEKRA Certification has a calibration and maintenance program for its measurement equipment. DEKRA Certification guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Certification at the time of performance of the test. DEKRA Certification is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Certification. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Certification. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Certification and the Accreditation Bodies. Report No: (NIE) 02625RCB.001 Page 4 of 59 2020-Mar-25 Abbreviations Abbreviation Meaning CBRS Citizens Broadband Radio Services CBSD Citizens Broadband Radio Service Device DP Domain Proxy DUT Device Under Test SAS Spectrum Access System UUT Unit Under Test CPI Certified Professional Installer N/A Not Applicable Usage of samples Samples undergoing test have been selected by: the client Sample M/01 is composed of the following elements: Control Nº Description Model SW Version HW version Serial Nº Date of reception 2625.01 CPE-CBSD pBS2120 CBSD: BaiBS_RTS_3.2.5 VER.A 1202000107181CP0753 2019-Nov- 01 N/A DOMAIN PROXY BaiOMC BaiOMC Rev- 18822 N/A N/A 2019-Nov- 01 Control Nº Description Model SW Version HW version Serial Nº Date of reception 2625.01 CPE-CBSD pBS2120 CBSD: BaiBS_RTS_3.5.4. VER.A 1202000107181CP0753 2020-Mar- 10 N/A DOMAIN PROXY BaiOMC BaiOMC Rev- 18822 N/A N/A 2019-Nov- 01 Sample M/03 is composed of the following elements: Control Nº Description Model SW Version HW…

Text truncated - open the document above for the full version.

Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 1 of 61 RF TEST REPORT Report No.: SET2019-15743 Product: LTE Base Station FCC ID: 2AG32PBS212096 Model No. : pBS2120 Applicant: Baicells Technologies Co., Ltd. Address: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China. Dates of Testing: 11/20/2019 —01/10/2020 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel：86 755 26627338 Fax：86 755 26627238 This test report consists of 61 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 2 of 61 Test Report Product.........................: LTE Base Station Brand Name..................: BaiCells Trade Name...................: BaiCells Applicant......................: Baicells Technologies Co., Ltd. Applicant Address.........: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China. Manufacturer.................: Baicells Technologies Co., Ltd. Manufacturer Address....: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China. Test Standards..............: 47 CFR FCC Part 2/96 Test Result....................: PASS Tested by.......................: 2020.03.24 Vincent，Test Engineer Reviewed by..................: 2020.03.24 Chris You, Senior Engineer Approved by...................: 2020.03.24 ShuangwenZhang，Manager Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 3 of 61 Table of Contents 1. GENERAL INFORMATION .................................................................................................... 5 1.1 EUT Description ......................................................................................................................... 5 1.2 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator ................... 6 1.3 Test Standards and Results ........................................................................................................ 7 1.4 Test Configuration of Equipment under Test ........................................................................... 8 1.5 Channel list .................................................................................................................................. 8 1.6 Measurement Results Explanation Example ........................................................................... 9 1.7 Facilities and Accreditations ...................................................................................................... 9 2. 47 CFR PART 2, PART 96 REQUIREMENTS ..................................................................... 10 2.1 Max EIRP and maximum spectral density ............................................................................. 10 2.2 Peak to Average Radio .............................................................................................................. 24 2.3 Occupied Bandwidth ................................................................................................................ 28 2.4 Frequency Stability ................................................................................................................... 34 2.5 Conducted Out of Band Emissions ......................................................................................... 37 2.6 Emission Mask .......................................................................................................................... 50 2.7 Radiated Spurious Emissions .................................................................................................. 53 3. LIST OF MEASURING EQUIPMENT ................................................................................. 60 4. UNCERTAINTY OF EVALUATION ..................................................................................... 61 Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 4 of 61 Change History Issue Date Reason for change 1.0 2020.03.24 First edition Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 5 of 61 1. GENERAL INFORMATION 1.1 EUT Description EUT Type LTE Base Station EUT supports Radios application LTE Band 48 Frequency Range LTE Band 48: 3550MHz-3700MHz Support Channel Bandwidth 10MHz, 20MHz Maximum Output Power to Antenna 25.68dBm Type of Modulation QPSK, 16QAM, 64QAM Antenna Type Internal Antenna Antenna Gain 13dBi Category of CBSD Category B Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 6 of 61 1.2 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator System Type of Modulation Emission Designator Frequency Tolerance (ppm) Maximum EIRP(W) LTE Band48 10MHz Bandwidth QPSK 9M43G7D 0.032 6.75 64QAM 9M50W7D 0.032 6.70 LTE Band48 20MHz Bandwidth QPSK 18M7G7D 0.032 7.38 64QAM 18M8W7D 0.032 7.28 Report No.: SET2019-15743 CCIC-SET/ TRF:IRF(2019-05-23) Page 7 of 61 1.3 Test Standards and Results 1. 47 CFR Part 2, 96 2. ANSI C63.26: 2015 3. KDB 971168 D01 Power Meas License Digital Systems v03r01 4. KDB 662911 D01 Multiple Transmitter Output v02r01 5. KDB 940660 D01 Part 96 CBRS Equipment v01 6. ANSI/TIA/EIA-603-E 2016 Remark： 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part …

Text truncated - open the document above for the full version.

CBDTest setup