2AG32PBS31010LTE Base Station

Neutrino-430 Indoor eNodeB User Manual for pBS31010 Document version: 01 All rights reserved © Baicells Technologies Co., Ltd. About This Document This document describes the configuration of the Baicells dual carrier eNodeB. It guides the customer how to configure the eNodeB to access the network after installation. This document is suitable for software version BaiBS_QRTB_2.4.x. Copyright Notice Baicells Technologies, Inc., copyrights the information in this document. No part of this document may be reproduced in any form or means without the prior written consent of Baicells Technologies, Inc. Disclaimer The information in this document is subject to change at any time without notice. For more information, please consult with a Baicells technical engineer or the support team. Revision Record Date Version Description 24 Sep, 2020 01 Initial released. Contact Us Baicells Technologies Co., Ltd. Baicells Technologies North America, Inc. China North America Address 9-10F,1stBldg.,No.81BeiqingRoad,Haidian District,Beijing,China 555 Republic Dr., #200, Plano, TX 75074, USA Phone 400-108-0167 +1-888-502-5585 Email [email protected] or [email protected] [email protected] or [email protected] Website www.Baicells.com https://na.Baicells.com Contents 1. Product Overview ......................................................................................................... 1 Introduction ............................................................................................................... 1 1.1 Features ...................................................................................................................... 1 1.2 Appearance ................................................................................................................ 2 1.3 Technical Specification ............................................................................................... 3 1.4 1.4.1 Hardware Specification....................................................................................... 3 1.4.2 Software Specification ........................................................................................ 4 1.4.3 Environment Specification .................................................................................. 5 FCC Compliance .......................................................................................................... 5 1.5 2. Install Base Station ...................................................................................................... 1 Packing List ................................................................................................................. 1 2.1 Installation Tool ........................................................................................................ 1 2.2 Install on Ceiling or Wall ............................................................................................. 1 2.3 Connect Cable ........................................................................................................... 2 2.4 Power On .................................................................................................................... 3 2.5 3. Initial Configuration ..................................................................................................... 4 Configuration Overview ............................................................................................. 4 3.1 Login Web Client ........................................................................................................ 5 3.2 3.2.1 Web Client Environmental Requirements .......................................................... 5 3.2.2 Connect Web Client to Base Station ................................................................... 5 3.2.3 Set Up Client Computer ...................................................................................... 5 3.2.4 Log In .................................................................................................................. 7 Quick Setting .............................................................................................................. 8 3.3 Configure System Parameter ................................................................................... 11 3.4 3.4.1 Configure NTP ................................................................................................... 11 3.4.2 Upgrade ............................................................................................................ 13 3.4.3 Backup .............................................................................................................. 14 3.4.4 Change Password .............................................................................................. 15 3.4.5 Diagnostics ........................................................................................................ 15 3.4.6 Certificate ......................................................................................................... 16 3.4.7 Reboot .............................................................................................................. 16 Configure Network Interface ................................................................................... 17 3.5 3.5.1 Configure WAN/LAN Interface ......................................................................... 17 3.5.2 Configure IPSec/MME Pool .............................................................................. 19 3.5.3 Configure LGW .................................................................................................. 24 3.5.4 Configure Static Route ...................................................................................... 26 Configure eNodeB Parameter .................................................................................. 27 3.6 3.6.1 Configure Security ............................................................................................ 27 3.6.2 Configure Mana…

Text truncated - open the document above for the full version.

Rev 11/20/07 Baicells Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AG32PBS31010 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name 1. Schematic 2. Block Diagram; 3. Circuit Description, 4. BOM 5. Tune up Procedure SCH Block Operational Description BOM Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name SHORT-TERM request Sincerely, (signature): (printed name): Back Huang

Baicells Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-4-7 SUBJECT: FCC Application for FCC ID: 2AG32PBS31010 To Whom It May Concern: We, the undersigned, hereby authorize Bruce Zhang at Jianyan Testing Group Shenzhen Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Bruce Zhang on our behalf shall have the same effects as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Baicells Technologies Co., Ltd. Back Huang 400-108-0167 2021-4-7

Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 83 of 91 8 EUT Constructional Details Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 84 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 85 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 86 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 87 of 91

label location label location

Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 88 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 89 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 90 of 91 Report No: JYTSZE200907501 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 91 of 91 ------End of report------

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZE200907502 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page RF Exposure Evaluation Report Applicant: Baicells Technologies Co., Ltd. Address of Applicant: 9-10F, 1stBldg., No.81BeiqingRoad, Haidian District, Beijing, China Equipment Under Test (EUT) Product Name: LTE Base Station Model No.: pBS31010 Trade mark: Baicells FCC ID: 2AG32PBS31010 Applicable standards: FCC CFR Title 47 Part 2 Subpart J Section 2.1091 Date of sample receipt: 18 Sep., 2020 Date of Test: 18 Sep., 2020 to 01 Apr., 2021 Date of report issue: 01 Apr., 2021 Test Result: PASS* Report No: JYTSZE200907502 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 6 2 Version Version No. Date Description 00 01 Apr., 2021 Original Tested by: Date: 01 Apr., 2021 Test Engineer Reviewed by: Date: 01 Apr., 2021 Project Engineer Report No: JYTSZE200907502 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 6 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 CLIENT INFORMATION ........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................... 4 4.3 OPERATING MODES .............................................................................................................................................. 4 4.4 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ...................................................................... 4 4.5 LABORATORY FACILITY ........................................................................................................................................ 4 4.6 LABORATORY LOCATION ...................................................................................................................................... 4 5 TECHNICAL REQUIREMENTS SPECIFICATION IN FCC CFR TITLE 47 PART 2.1091 ............................ 5 5.1 LIMITS .................................................................................................................................................................... 5 5.2 TEST PROCEDURE ................................................................................................................................................. 5 5.3 RESULT .................................................................................................................................................................. 6 5.4 CONCLUSION ......................................................................................................................................................... 6 Report No: JYTSZE200907502 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 6 4 General Information 4.1 Client Information Applicant: Baicells Technologies Co., Ltd. Address: 9-10F, 1stBldg., No.81BeiqingRoad, Haidian District, Beijing, China Manufacturer: Baicells Technologies Co., Ltd. Address: 9-10F, 1stBldg., No.81BeiqingRoad, Haidian District, Beijing, China 4.2 General Description of E.U.T. Product Name: LTE Base Station Model No.: pBS31010 Operation Frequency: Band48: 3550MHz~3700MHz Modulation type: QPSK, 16QAM, 64QAM Antenna Type: Internal antenna (“N” type) Antenna gain: LTE Band 48: 3.0dBi Test Sample Condition: The test samples were provided in good working order with no visible defects. 4.3 Operating Modes Operating mode Detail description LTE Band 48 mode Keep the EUT in continuously transmitting in LTE Band 48 mode 4.4…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900951101 Page: 1 of 47 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2009009511CR Applicant: Baicells Technologies Co., Ltd. Address of Applicant: 9-10F,1stBldg., No.81BeiqingRoad, Haidian District, Beijing, China Manufacturer: Baicells Technologies Co., Ltd. Address of Manufacturer: 9-10F,1stBldg., No.81BeiqingRoad, Haidian District, Beijing, China Equipment Under Test (EUT): EUT Name: LTE Base Station Model No.: pBS31010 Trade Mark: Baicells FCC ID: 2AG32PBS31010 Standard(s) : CBRSA-TS-9001-V1.0.0 WINNF-TS-0122-V1.0 FCC 47 CFR Part 96 KDB 940660 D01 Date of Receipt: 2021-01-30 Date of Test: 2021-01-30 to 2021-03-30 Date of Issue: 2021-30-30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900951101 Page: 2 of 47 Revision Record VersionChapterDateModifierRemark 012021-03-30Original Authorized for issue by: Calvin Weng /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900951101 Page: 3 of 47 2Test Summary ItemStandardTest Case IDResult Domain Proxy Multi-Step registration WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.2Pass Domain Proxy Single-Step registration for CBSD with CPI signed data WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.6Pass Domain Proxy Missing Required parameters (responseCode 102) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.9Pass Domain Proxy Pending registration (responseCode 200) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.11Pass Domain Proxy Invalid parameters (responseCode 103) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.13Pass Domain Proxy Blacklisted CBSD (responseCode 101) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.15Pass Domain Proxy Unsupported SAS protocol version responseCode 100) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.17Pass Domain Proxy Group Error (responseCode 201) WINNF-TS-0122- V1.0.0 WINNF.FT.D.REG.19Pass Unsuccessful Grant responseCode=400 (INTERFERENCE) WINNF-TS-0122- V1.0.0 WINNF.FT.C.GRA.1Pass Unsuccessful Grant responseCode=401 (GRANT_CONFLICT) WINNF-TS-0122- V1.0.0 WINNF.FT.C.GRA.2Pass Domain Proxy Heartbeat Success Case (first Heartbeat Response) WINNF-TS-0122- V1.0.0 WINNF.FT.D.HBT.2Pass Heartbeat responseCode=105 (DEREGISTER) WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.3Pass Heartbeat responseCode=501 (SUSPENDED_GRANT) in First Heartbeat Response WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.5Pass Heartbeat responseCode=501 (SUSPENDED_GRANT) in Subsequent Heartbeat Response WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.6Pass Heartbeat responseCode=502 (UNSYNC_OP_PARAM) WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.7Pass Domain Proxy Heartbeat responseCode=500 (TEMINATED_GRANT) WINNF-TS-0122- V1.0.0 WINNF.FT.D.HBT.8Pass Heartbeat Response Absent (First Heartbeat) WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.9Pass Heartbeat Response Absent (Subsequent Heartbeat) WINNF-TS-0122- V1.0.0 WINNF.FT.C.HBT.10Pass Domain Proxy Registration Response contains measReportConfig WINNF-TS-0122- V1.0.0 WINNF.FT.D.MES.2 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900951101 Page: 4 of 47 ItemStandardTest Case IDResult Grant Response contains measReportConfig WINNF-TS-0122- V1.0.0 WINNF.FT.C.MES.3 Pass Domain Proxy Heartbeat Response contains measReportConfig WINNF-TS-0122- V1.0.0 WINNF.FT.D.MES.5 Pass Domain Proxy Successful Relinquishment WINNF-TS-0122- V1.0.0 WINNF.FT.D.RLQ.2Pass Domain Proxy Successful Deregistration WINNF-TS-0122- V1.0.0 WINNF.FT.D.DRG.2Pass Successful TLS connection between UUT and SAS Test Harness WINNF-TS-0122- V1.0.0 WINNF.FT.C.SCS.1 Pass TLS failure due to revoked certificate WINNF-TS-0122- V1.0.0 WINNF.FT.C.SCS.2 Pass TLS failure due to expired server certificate WINNF-TS-0122- V1.0.0 WINNF.FT.C.SCS.3 Pass TLS failure when SAS Test Harness certificate is issue by unknown CA WINNF-TS-0122- V1.0.0 WINNF.FT.C.SCS.4 Pass TLS failure when certificate at the SAS Test Harness is corrupted WINNF-TS-0122- V1.0.0 WINNF.FT.C.SCS.5 Pass UUT RF Transmit Power Measurement WINNF-TS-0122- V1.0.0 WINNF.PT.C.HBT.1Pass SAS Version: 1.0.0.3 The UUT is a CBSD with Domain Proxy. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: Test standards: CBRSA-TS-9001-V1.0.0 CBRS Alliance Certification Test Plan WINNF-TS-0122-V1.0.0 Test and Certification for Citizens Broadband Radio Service (CBRS); Conformance and Performance Test Technical Specification; CBSD/DP as Unit Under Test (UUT) KDB 940660 D01 Part 96 CBRS Eqpt v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200900951101 Page: 5 of 47 3Contents Page 1COVER PAGE...........................................................................................................................................1 2TEST SUMMARY......................................................................................................................................3 3CONTENTS...............................................................................................................................................5 4GENERAL INFORMATION.......................................................................................................................7 4.1DETAILS OF E.U.T...............................................................................................................................7 4.2DESCRIPTION OF CBSD/DP SUPPORT FEATURES.................................................................................7 4.3SUMMARY OF TEST RESULTS...............................................................................................................8 4.4MEASUREMENT UNCERTAINTY..............................................................................................................8 4.5DESCRIPTION OF SUPPORT UNITS.............................................…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZE200907501V02 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT Applicant: Baicells Technologies Co., Ltd. Address of Applicant: 9-10F,1stBldg.,No.81BeiqingRoad,Haidian District, Beijing, China Equipment Under Test (EUT) Product Name: LTE Base Station Model No.: pBS31010 Trade mark: Baicells FCC ID: 2AG32PBS31010 Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 96 Date of sample receipt: 18 Sep., 2020 Date of Test: 18 Sep., 2020 to 01 Apr., 2021 Date of report issued: 15 Apr., 2021 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: JYTSZE200907501V02 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 91 2. Version Version No. Date Description 00 01 Apr., 2021 Original 01 14 Apr., 2021 Update sections 5.2 and 5.6 02 15 Apr., 2021 Update sections 5.9 Tested by: Date: 15 Apr., 2021 Test Engineer Reviewed by: Date: 15 Apr., 2021 Project Engineer Report No: JYTSZE200907501V02 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 91 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES AND TEST SAMPLES PLANS .............................................................................................................. 6 5.4 MEASUREMENT UNCERTAINTY .............................................................................................................................. 6 5.5 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 6 5.6 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................... 6 5.7 DESCRIPTION OF CABLE USED ............................................................................................................................. 6 5.8 LABORATORY FACILITY .......................................................................................................................................... 6 5.9 LABORATORY LOCATION ....................................................................................................................................... 6 5.10 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6. TEST RESULTS ........................................................................................................................................................... 8 6.1 EFFECTIVE ISOTROPIC RADIATED (EIRP) AND POWER SPECTRAL DENSITY (PSD) ......................................... 8 6.2 PEAK-TO-AVERAGE POWER RATIO (PAPR) ...................................................................................................... 32 6.3 OCCUPY BANDWIDTH .......................................................................................................................................... 37 6.4 EMISSION MASK .................................................................................................................................................. 47 6.5 OUT OF BAND EMISSION AT ANTENNA TERMINALS ............................................................................................…

Text truncated - open the document above for the full version.

Report No: JYTSZE200907501V02 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2009075 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 37 of 91 6.3 Occupy Bandwidth Test Requirement: FCC part 96.41(E)(3) Test setup: Test Procedure: 1. The EUT’s output RF connector was connected with a short cable to the spectrum analyzer 2. The transmitter shall be operated at its maximum carrier power measured under normal test conditions. 3. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. 4. The resolution bandwidth (RBW) shall be in the range of 1% to 5% of the occupied bandwidth (OBW) and video bandwidth (VBW) shall be a…

Text truncated - open the document above for the full version.