2AG6N-M20Mobile Terminal

Fujian LANDI Commercial Equipment Co.,Ltd.

Application Details

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Date of Grant: Jul 30, 2024
Application Purpose: Original Equipment
Date of Application: Jul 25, 2024
Equipment Note: Mobile Terminal
Frequency Range: 5745.00000000 - 5825.00000000
Company: Fujian LANDI Commercial Equipment Co.,Ltd.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Attestation Statements

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name FCC ID:2AG6N-M20 M20,M20SE We, applicant Company Name: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Phone: 086-0591-88502210 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-23 Printed Name of Signee: Yanyan Chen Company: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Tel: 086-0591-88502210 Fax: 086-059188077279 Email: [email protected]

Attestation Statements

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name FCC ID:2AG6N-M20 M20,M20SE We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year af- ter the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. US-American Point of Contact Applicant/Approval Holder Company Name: Iconsigh Inc. Fujian LANDI Commercial Equipment Co.,Ltd. FRN: 0033398652 0025172941 Contact Name: Benjamin Kaur Yanyan Chen Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Phone: +1 (408) 320-9867 086-0591-88502210 Email: [email protected] [email protected]

Cover Letter(s)

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name FCC ID:2AG6N-M20 M20,M20SE For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Parts Lists • the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-23 Printed Name of Signee: Yanyan Chen Company: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Tel: 086-0591-88502210 Fax: 086-059188077279 Email: [email protected]

Cover Letter(s)

Fujian LANDI Commercial Equipment Co.,Ltd. Add: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Te l : 086-0591-88502210 Fax: 086-059188077279 Email: [email protected] Declaration Letter Date: 2024-07-23 To : Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: For our business issue and marketing requirement, we would like to list different model number on the FCC certificates and reports, as following: FCC ID:2AG6N-M20 Model Number: M20,M20SE Model Difference: the main differences between the two products are as follows: 1. The appearance of the two products is different, and the M20 has an additional printing module. 2. The hardware of the motherboard of the two products is the same, and the device of the printing module will be reserved on the motherboard, of which M20SE is not pasted, and M20 is pasted. 3. The WI-FI/BT/GPS antenna, 4G antenna, and NFC antenna of the M20 and M20SE are inconsistent 4. The configuration information is as follows： Configuration HVIN Model Printer Scanning camera 1# M20S1 M20 ✓ ✓ 2# M20S0 M20 ✓ X 3# M20SES1 M20SE X ✓ 4# M20SES0 M20SE X X Sincerely, Printed name: Yanyan Chen Title: Certification Engineer

Cover Letter(s)

Judgement letter Federal Communications Commission 7435 Oakland Mills Road ColumbiaMD21046 Date:07.25.2024 To Whom It May Concern: This purpose of this filing is to request an EQUIPMENT MODIFICATION for FCC ID: 2AG6N-M20 A. DESCRIPTIONOFPRODUCTCHANGES 1. We declare that this variant device does not increase the RF output power for all RF parts, and RF PCB layout are not changed; See TuneUp 2. Change antennas and location. Different Model:M20 Model:M20SE Antenna Gain GSM850:-3.51dBi GSM850:-1.94dBi PCS1900:0.42dBi PCS1900:-1.72dBi WCDMAB2:0.42dBi WCDMAB2:-1.72dBi WCDMAB4:0.29dBi WCDMAB4:0.93dBi WCDMAB5:-3.51dBi WCDMAB5:-1.94dBi LTEBand2:0.42dBi, LTEBand4:0.29dBi, LTEBand5:-3.51dBi, LTEBand7:0.25dBi, LTEBand12:-2.87dBi, LTEBand13:-4.01dBi, LTEBand17:-2.87dBi, LTEBand25:0.42dBi, LTEBand26:-3.17dBi, LTEBand41:0.25dBi, LTEBand66:0.29dBi, LTEBand71:-1.55dBi, LTEBand2:-1.72dBi, LTEBand4:0.93dBi, LTEBand5:-1.94dBi, LTEBand7:1.85dBi, LTEBand12:-1.83dBi, LTEBand13:-1.98dBi, LTEBand17:-1.83dBi, LTEBand25:-1.72dBi, LTEBand26:-1.94dBi, LTEBand41:1.85dBi, LTEBand66:0.93dBi, LTEBand71:-1.83dBi, WiFI2.4G:0.18dBi WiFI2.4G:0.05dBi WiFI5G:2.53 dBi WiFI5G:3.44dBi BT/BLE:0.18dBi BT/BLE:0.05dBi Antenna type Wired loop NFC Antenna FPC Antenna for others FPC loop NFC Antenna FPC Antenna for others See the antenna info. 3. Minor component: Different Model:M20 Model:M20SE USB PCB circuits N/A USB charging function circuits and WWAN DIV(RX) antenna interface connecting point (The RF TX function is not affected) Main PCB USB Port WWAN DIV(RX) antenna interface connecting pin Front PCB provide NFC antenna interface connecting pin Add WWAN DIV(RX) antenna interface connecting point and Remove WWAN DIV(RX) antenna interface connecting pin Remove USB Port Remove Front PCB provide NFC antenna interface connecting pin Reverse PCB add NFC antenna interface connecting pin Scanning camera HVIN: M20S1 – Yes HVIN: M20S0 – No HVIN: M20SES1 – Yes HVIN: M20SES0 – No See Internal Photos/Schematics/PartsList. 4.Appearance changes: Different Model:M20 Model:M20SE Size 230*78*50mm 172*78*18mm See External photos. 5.Software and hardware version: Different Model:M20 Model:M20SE Hardware version V030 V030 Software version 1.40RB 1.40RB 6.Printing module/circuits: Different Model:M20 Model:M20SE Printing module/circuits Yes N/A See Internal Photos/Schematics/PartsList/BlockDiagram. B.PERFORMANCEDIFFERENCES Description Additional testing Remark FCC Part15.247 BT Report Need testing Due to Clause A.2~A.6 ,Model:M20 have fully tested, the Model:M20SE add Radiated spurious emission and AC line Conducted emission testing. FCC Part15.247 BLE Report Need testing Due to Clause A.2~A.6 ,Model:M20 have fully tested, the Model:M20SE add Radiated spurious emission and AC line Conducted emission testing FCC Part15.247 WiFi 2.4G Report Need testing Due to Clause A.2~A.6,Model:M20 have fully tested, the Model:M20SE add Radiated spurious emission and AC line Conducted emission testing FCC Part15.407WiFi 5G Report Need testing Due to Clause A.2~A.6, XX ,Model:M20 have fully tested, the Model:M20SE add Radiated spurious emission and AC line Conducted emission testing FCC Part15.407WiFi 5GDFS Report N/A Due to all change does not affect DFS functionality, so Model:M20 have fully tested FCC 2G/3G/4G Test Report Need testing Due to Clause A.2~A.6, Model:M20 have fully tested, ERIP/ERP RF power use max antenna gain for both Model:M20 and M20SE. The Model:M20SE add Radiated spurious emission and AC line Conducted emission testing SAR Test Report Need testing Due to Clause A.2~A.6, Model:M20 and M20SE have fully tested. NFC RF EXPOSURE EVALUATION Need testing Due to Clause A.2~A.6 ,Model:M20 and M20SE have evaluated. C. CONCLUSION This radio continues to meet all FCC standard requirements. Please contact me if you have any questions or need further information regarding this application. Sincerely, Signature Date:2024-07-25 Printed Name of Signee: Yanyan Chen Company: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Tel: 086-0591-88502210 Fax: 086-059188077279 Email: [email protected]

Cover Letter(s)

Short Term Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705) , we request short term confidentiality prior to marketing the devicefor the documentation of the following products: FCC ID Model name FCC ID:2AG6N-M20 M20,M20SE For the products listed above, we request short term confidentiality for all applicable exhibits as there are: • External photos • Internal photos • Test setup photos • User manual The above listed exhibits contain business sensitive information which we wish to keep confidential until the actual marketing of our device, that is planned for: Short term confidentiality release date: <180 days> If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-23 Printed Name of Signee: Yanyan Chen Company: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Tel: 086-0591-88502210 Fax: 086-059188077279 Email: [email protected]

Cover Letter(s)

NII Declaration Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern MODEL NUMBER: (MODEL NUMBER OF UNIT TESTED) M20,M20SE FCC ID: 2AG6N-M20 Product description: Mobile Terminal The following features and technical capabilities are declared for the product shown above: (1) DFS Device:  Master  Client with Radar detection ☑ Client without radar detection, (2) Service capability listing Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412-2462 ☑ Yes  No  Yes  No  Yes  No ☑ Yes  No 5745-5825 ☑ Yes  No  Yes  No  Yes  No ☑ Yes  No 5755-5795 ☑ Yes  No  Yes  No  Yes  No ☑ Yes  No 5180-5240 ☑ Yes  No  Yes  No  Yes  No ☑ Yes  No 5190-5230 ☑ Yes  No  Yes  No  Yes  No ☑ Yes  No 5260-5320  Yes  No ☑ Yes  No  Yes  No  Yes  No 5270-5310  Yes  No ☑ Yes  No  Yes  No  Yes  No 5500-5700  Yes  No ☑ Yes  No  Yes  No  Yes  No 5510-5670  Yes  No ☑ Yes  No  Yes  No  Yes  No (3) Meet 15.202 requirement ☑ Yes  No • A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (4) Statement of Conformity for the Client in Non-Associated mode The client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to- peer modes. ☑ Apply  Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Signature Date:2024-07-23 Printed Name of Signee: Yanyan Chen Company: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Tel: 086-0591-88502210 Fax: 086-059188077279 Email: [email protected]

RF Exposure Info

FCC SAR TEST REPORT Applicant: Fujian LANDI Commercial Equipment Co.,Ltd. Address: Building 17, Section A, Software Park, No. 89 Software Road, Gulou District, Fuzhou Municipality, Fujian Province, China Product Name: Mobile Terminal FCC ID: 2AG6N-M20 Standard(s): 47 CFR Part 2(2.1093) Report Number: XMDN240206-08120E-20C Report Date: 2024/06/20 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Mark Dong Approved By: Brave Lu Title: SAR Engineer Title: SAR Engineer Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: XMDN240206-08120E-20C Report Template Version: FCC SAR-V1.0 Page 2 of 95 SAR TEST RESULTS SUMMARY Mode Max. Reported SAR Level(s) (W/kg) Limit (W/kg) GSM 850 1g Body SAR 0.54 1. 6 PCS 1900 1g Body SAR 0.37 WCDMA Band 2 1g Body SAR 0.71 WCDMA Band 4 1g Body SAR 0.75 WCDMA Band 5 1g Body SAR 0.72 LTE Band 7 1g Body SAR 0.77 LTE Band 12&17 1g Body SAR 0.64 LTE Band 13 1g Body SAR 0.69 LTE Band 25&2 1g Body SAR 0.62 LTE Band 26&5 1g Body SAR 0.71 LTE Band 41 1g Body SAR 0.24 LTE Band 66&4 1g Body SAR 0.56 LTE Band 71 1g Body SAR 0.79 Wi-Fi 2.4G 1g Body SAR 0.03 Wi-Fi 5.2G 1g Body SAR 0.73 Wi-Fi 5.3G 1g Body SAR 0.49 Wi-Fi 5.6G 1g Body SAR 0.68 Wi-Fi 5.8G 1g Body SAR 0.64 Bluetooth 1g Body SAR 0.11 Simultaneous 1g Body SAR 1.52 1g Body SAR 1.52 (Hotspot) Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: XMDN240206-08120E-20C Report Template Version: FCC SAR-V1.0 Page 3 of 95 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) IEC 62209-2:2010/AMD1:2019 Amendment 1 - Human exposure to radio frequency fields from hand-held and body- mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency ran ge of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 KDB 941225 D06 Hotspot Mode v02r01 KDB 248227 D01 802.11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: XMDN240206-08120E-20C Report Template Version: FCC SAR-V1.0 Page 4 of 95 CONTENTS SAR TEST RESULTS SUMMARY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 2 DOCUMENT REVISION HISTORY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 1. GENERAL INFORMATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 2. REFERENCE, STANDARDS, AND GUIDELINES ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.1 SAR LIMITS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.2 TEST FACILITY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 3. DESCRIPTION OF TEST SYSTEM ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 11 4. EQUIPMENT LIST AND CALIBRATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 5. SAR MEASUREMENT SYSTEM VERIFICATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 5.1 LIQUID VERIFICATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 5.2 LIQUID VERIFICATION RESULTS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 5.3 SYSTEM ACCURACY VERIFICATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 20 5.4 SYSTEM ACCURACY CHECK RESULTS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 20 5.5 SAR SYSTEM VALIDATION DATA ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ…

Text truncated - open the document above for the full version.

RF Exposure Info

Report No.: XMDN240206-08120E-20C Page1 / 19 Test Plot 1#: GSM 850_Mid_Body Back DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic GPRS-3 slots; Frequency: 836.6 MHz; Duty Cycle: 1:2.66 Medium parameters used: f =836.6 MHz; σ = 0.936 S/m; ε r =41.464; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(9.55, 8.6, 8.54) @ 836.6 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (6x8x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.581 W/kg Zoom Scan (8x8x7) /Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.32 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 0.688 W/kg SAR(1 g) = 0.515 W/kg; SAR(10 g) = 0.362 W/kg Maximum value of SAR (measured) = 0.640 W/kg 0 dB = 0.640 W/kg = -1.94dBW/kg Report No.: XMDN240206-08120E-20C Page2 / 19 Test Plot 2#: PCS 1900_High_Body Back DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic GPRS-3 slots; Frequency: 1909.8 MHz; Duty Cycle: 1:2.66 Medium parameters used: f =1909.8 MHz; σ = 1.433 S/m; ε r =38.908; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1909.8 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (6x8x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.474 W/kg Zoom Scan (7x6x7) /Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.44 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.527 W/kg SAR(1 g) = 0.354 W/kg; SAR(10 g) = 0.227 W/kg Maximum value of SAR (measured) = 0.459 W/kg 0 dB = 0.459 W/kg = -3.38dBW/kg Report No.: XMDN240206-08120E-20C Page3 / 19 Test Plot 3#: WCDMA Band 2_Mid_Body Back DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic WCDMA (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f =1880 MHz; σ = 1.425 S/m; ε r =39.044; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (7x8x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.977 W/kg Zoom Scan (6x6x7) /Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.094 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.964 W/kg SAR(1 g) = 0.664 W/kg; SAR(10 g) = 0.430 W/kg Maximum value of SAR (measured) = 0.859 W/kg 0 dB = 0.859 W/kg = -0.66dBW/kg Report No.: XMDN240206-08120E-20C Page4 / 19 Test Plot 4#: WCDMA Band 4_Low_Body Back DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic WCDMA (0); Frequency: 1712.4 MHz; Duty Cycle: 1:1 Medium parameters used: f =1712.4 MHz; σ = 1.319 S/m; ε r =39.696; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(8.54, 7.65, 7.43) @ 1712.4 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (7x8x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.812 W/kg Zoom Scan (6x7x7) /Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.811 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.964 W/kg SAR(1 g) = 0.700 W/kg; SAR(10 g) = 0.488 W/kg Maximum value of SAR (measured) = 0.867 W/kg 0 dB = 0.867 W/kg = -0.62dBW/kg Report No.: XMDN240206-08120E-20C Page5 / 19 Test Plot 5#: WCDMA Band 5_Mid_Body Back DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic WCDMA (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Medium parameters used: f =836.6 MHz; σ = 0.936 S/m; ε r =41.464; ρ = 1000 kg/m 3 ; Phantom section: Right Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(9.55, 8.6, 8.54) @ 836.6 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (7x8x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.775 W/kg Zoom Scan (6x6x7) /Cube 0:Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.592 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.925 W/kg SAR(1 g) = 0.689 W/kg; SAR(10 g) = 0.498 W/kg Maximum value of SAR (measured) = 0.849 W/kg 0 dB = 0.849 W/kg = -0.71dBW/kg Report No.: XMDN240206-08120E-20C Page6 / 19 Test Plot 6#: LTE Band 7_1RB_Low_Body Right DUT: Mobile Terminal; Type:M20; Serial: 2II2-2; Communication System: Generic FDD-LTE (0); Frequency: 2510 MHz; Duty Cycle: 1:1 Medium parameters used: f =2510 MHz; σ = 1.893 S/m; ε r =40.671; ρ = 1000 kg/m 3 ; Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7839; ConvF(7.61, 6.94, 6.73) @ 2510 MHz; Calibrated: 2023/9/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn772; Calibrated: 2024/1/23  Phantom: SAM (30deg probe tilt) with CRP v5.0…

Text truncated - open the document above for the full version.

RF Exposure Info

Text truncated - open the document above for the full version.

Contact Information

Applicant

Yanyan Chen

[email protected]086-0591-88502210Fax: 086-059188077279

Test Firm

Bay Area Compliance Laboratories Corp. (Dongguan)David Zhang

[email protected]0086-769-8685-8891

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
4	15E	5.75 GHz - 5.83 GHz	42.00 mW

Confidentiality

Long Term

Grant Notes

Power Output is conducted. The antenna(s) used for this transmitter must not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 10 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.73 W/kg, 0.73 W/kg and 1.52 W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.