2AGBN-PBT40012 in 1 Power Bank and Bluetooth Speaker

Below is the operation of Power Bank and Bluetooth Speaker. Specifications： ·Input: DC 5V/1A ·Output: DC 5V/2.1A ·Capacity: Li-polymer 4200mAh ·Bluetooth Version 3.0 ·Transmission distance: 10m ·Rated power: 3W ·Size: D43XL100mm ·Weight: Approx 168g How to Charge the item: 1. Use the cable provided for charging. 2. When charging, the LED indicators will flash. When fully charged, the LED lights will stay on. How to Charge devices: 1.Use your own device charging USB cable and connect USB end to the output and the other end to your device for charging. 2.The item will begin to charge your device automatically. The indicators will turn off automatically 5-8 seconds later and you can press the power button to see the power status. How to play music: 1.Long Press the power button to open the Bluetooth and you will hear”discovering”when paring with your device. 2.When you heard the voice ”connected” which means your device has been connected with the Bluetooth of the item. And you can control the music by operating your device. 3.”+” button: Press once →volume up; when reaching the max,you can hear double low tone to remind; long-press→Next One 4.”-“ button: Press once→ volume down when reaching the min,you can hear double low tone to remind;; long-press→Last one How to answer the phone: 1.When there is incoming calls, the item will ding-ling to remind you and you press the phone button to answer the phone; long press the button to switch to your own phone and press again to hung up the phone. 2.long press the button to refuse the incoming calls. Warning: ·Do not place or use the product in a high temperature and or in a humid environment. ·Keep the product out of the reach of children ·Do not vigorously shake hit or throw the product ·If this power bank is not used for a long time, please charge/discharge it once every three months to ensure the service time of the product. Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Shenzhen Stark Energy Technology Co.,Ltd may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Shenzhen Stark Energy Technology Co.,Ltd Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China TEL: +86-755-27703789 FAX +86-755-27701903 DATE 11-02-2015 FCC ID: 2AGBN-PBT4001 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint BZT Testing Technology Co., Ltd. (Jack Kang) at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by MiCOM Labs Inc, still resides with Shenzhen Stark Energy Technology Co.,Ltd at Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China. Dated this 11-02-2015 Agency agreement expiration date: 11-01-2016 By: Linlin Zhao Signature Printed Title: Manager On behalf of : Shenzhen Stark Energy Technology Co.,Ltd Telephone: +86-755-27703789

Shenzhen Stark Energy Technology Co.,Ltd Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China TEL: +86-755-27703789 FAX +86-755-27701903 DATE 11-02-2015 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AGBN-PBT4001 Product Name: 2 in 1 Power Bank and Bluetooth Speaker Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 11-02-2015 By: Linlin Zhao Signature Printed Title: Manager On behalf of : Shenzhen Stark Energy Technology Co.,Ltd Telephone: +86-755-27703789

FCC ID Label Information 1. Label location: 2. FCC ID Label: Model: PBT4001 FCC ID: 2AGBN-PBT4001 FCCID Label Location

FCC RADIO TEST REPORT FCC ID: 2AGBN-PBT4001 Product： 2 in 1 Power Bank and Bluetooth Speaker Trade Name： N/A Model Number： PBT4001, FG-1062N, P326.593 Report No.： POCE15072229NRRF Prepared for Shenzhen Stark Energy Technology Co.,Ltd Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China Prepared by Shenzhen POCE Technology Co.,Ltd. Room 502, Bldg. 1, Xinghua Garden, Baoan Road Xixiang, Baoan District, Shenzhen, China V1.0 Page 2 of 30 Report No.: POCE15072229NRRF TEST RESULT CERTIFICATION Applicant’s name...................... Shenzhen Stark Energy Technology Co.,Ltd Address....................................... Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China Manufacture's Name................. Shenzhen Stark Energy Technology Co.,Ltd Address....................................... Building B, Jinkaijin Industrial Park, Shilongzai, Shuitian Village, Shiyan Town, Bao’an District, Shenzhen,518108, China Product description Product name.............................. 2 in 1 Power Bank and Bluetooth Speaker Model and/or type reference .................................................... PBT4001, FG-1062N, P326.593 Ratings DC 3.7V from battery Standards................................ FCC Part15.249 Test procedure ............................... ANSI C63.10-2010 This device described above has been tested by POCE, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of POCE, this document may be altered or revised by POCE, personal only, and shall be noted in the revision of the document. Date of Test................................................... Date (s) of performance of tests.................... Oct. 25, 2015 ~ Oct. 27, 2015 Date of Issue.................................................. Oct. 27, 2015 Test Result..................................................... Pass Testing Engineer : (Lynn Chen) Technical Manager : (Carlen Liu) Authorized Signatory : (Tommy zhang) The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 30 Report No.: POCE15072229NRRF Contents 1 . T E S T S T A N D A R D S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 2 . S U M M A R Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .5 2.1. Equipment Under Test 5 2.2. Description of the Equipment under Test (EUT) 5 2.3. EUT operation mode 6 2.4. EUT configuration 6 2.5. Related Submittal(s) / Grant (s) 6 2.6. Modifications 6 3 . T ES T E N V I R O N M E N T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 7 3.4. Configuration of Tested System 7 3.5. Statement of the measurement uncertainty 8 3.6. Equipments Used during the Test 9 4 . T E S T C O N D I T I O N S A N D R E S U L T S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .1 0 4.1. Conducted Emissions Test 10 4.2. Transmitter Radiated Unwanted Emissions and Bandedge 13 4.3. Occupied Bandwidth Measurement 19 5 . A N T E N N A R E Q U I R E M E N T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .2 4 6 . T E S T S E T U P P H O T O S O F T H E E U T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .2 5 7 . E X T E R N A L A N D I N T E R N AL P H O T O S O F T H E E U T. . . . . . . . . . . . . . . . . . . . . .2 6 V1.0 Page 4 of 30 Report No.: POCE15072229NRRF 1 . T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.10-2013 V1.0 Page 5 of 30 Report No.: POCE15072229NRRF 2 . S U M M A R Y 2.1. Equipment Under Test Power supply system utilised Power supply voltage : o 120V / 60 Hz o 115V / 60Hz o 12 V DC o 24 V DC ● Other (specified in blank below) DC 3.7V from battery 2.2. Description of the Equipment under Test (EUT) The EUT ( 2 in 1 Power Bank and Bluetooth Speaker ) support Bluetooth function. Name of EUT 2 in 1 Power Bank and Bluetooth Speaker Model Number PBT4001 Antenna Type Internal BT CE Operation frequency 2402MHz-2480MHz BT Modulation Type GFSK,8DPSK,π/4DQPSK(BT V2.1+EDR) Bluetooth BT V2.1+EDR Antenna Gain 0dBi Channel List: Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 00 2402 27 2429 54 2456 01 2403 28 2430 55 2457 02 2404 29 2431 56 2458 03 2405 30 2432 57 2459 04 2406 31 2433 58 2460 05 2407 32 2434 59 2461 06 2408 33 2435 60 2462 07 2409 34 2436 61 2463 08 2410 35 2437 62 2464 09 2411 36 2438 63 2465 10 2412 37 2439 64 2466 11 2413 38 2440 65 2467 12 2414 39 2441 66 2468 13 2415 40 2442 67 2469 14 2416 41 2443 68 2470 15 2417 42 2444 69 2471 16 2418 43 2445 70 2472 17 2419 44 2446 71 2473 18 2420 45 2447 72 2474 19 2421 46 2448 73 2475 20 2422 47 2449 74 2476 21 2423 48 2450 75 2477 22 2424 49 2451 76 2478 23 2425 50 2452 77 2479 24 2426 51 2453 78 2480 25 2427 52 2454 26 2428 53 2455 For more details, refer to the user’s manual of the EUT. Serial number: Prototype V1.0 Page 6 of 30 Report No.: POCE15072229NRRF 2.3. EUT operation mode Test Mode(TM) Description Remark TM1 Bottom Channel Transmitting / TM2 Middle Channel Transmitting / TM3 Top Channel Transmitting / TM4 Charging and keeping TX power by USB TM5 Discharging and keeping TX Full…

Text truncated - open the document above for the full version.