2AGDI32NXBOTRGP00XBODYGUARD

PRODUCT INSTRUCTIONS 1.DownloadandinstallmobilephoneAPP Method1:ScanQRcodetogettheapp.   SupportbothAndroidandiOSoperatingsystem  Method2:Visitofficialwebsitewww.bonbonbear.com,enter"download"togetthe app. Method 3: Search“bonbonbear”from big application platforms (such as the APPstore,peas,androidAPPmarket,etc.)  DownloadAlert: （1）PleaseusetheAndroid(2.3andabove)oriOS(7.0andabove)smartphoneto download“bonbonbear”APP; （2）Applicationinvolvesthelocationinformation,APPdownloadprocessmaybe prevented by security software, please close the security software before you download; （3）Becausetheapplicationfileisbig,itisrecommendedtodownloaditwithWIFI, ifencounterafaileddownload,pleasecheckthenetworkstatusandre-downloadit whennetworkisunobstructed. 1、 ActivateandbindMiotiochildrenwatch (1) Bindaccount,activatedevice. Method1:Scanthedevice’sQRcodetobind. Turnonthewatch,starttheMiotiomobilephoneAPP,registeranewuser andloginsuccessfully,thenscanthefollowingQRcodetobindthewatch. About 20 seconds after activation, you can use when getting a successful prompt.   Note:thisQRcodeistheuniqueidentifiertobindwatch,please safekeeping. Method2:BindingthroughthedeviceID(applicabletodevicein unactivated state) Whenwatchstartsbutinunactivatedstate,longpresstherecordbutton5 secondstoenterengineeringmodelfordeviceIDnumberandsecuritycode (Akey);start“bonbonbear”mobilephoneAPP,registeranewuserandlog in successfully, click on the "device ID activation" and enterthe correct ID number and security code, then the watch can be bound and activated. (longpresstherecordbutton5secondsagaintoexitengineeringmode).  （2）Multipleaccountscanbeboundtogether  Devicecansupportupto6APPaccountsbindingtogether(thefirstoneis the default account as the administrator). After the success ofthemaster accountbindingdevice,otheraccountsscanQRcodeandenterthecorrect verificationcode,thencanbindthewatch(verificationcodewillbesentby thesystemtothemainaccountphone)  2、 Deviceintroduction  Turnon/off:Longpressthepowerbutton3seconds(inorderto ensure the safetyofchildren,afteractivationwatchcanonlybeturnedoffthroughtheAPP remoteshutdownfunction). SOShelp:Whenthecurrentstatusofwatchison,longpresscall/recordbutton 3secondstocallmasteraccount,afterwhichsendSOSmessageand APP notificationstothebindingmobilephoneaccountandstar treciprocating positioning and cancel the reciprocating positioning in APP. Telephone answering: When the watch is called, short press record button to answerphonecalls,shortpresspowerkeytoreject/endcalls;(inordertoensure thesafetyofchildren,onlybindingphoneIDcancallin). Messageview:Whenreceivingnewmessage,thewatchwillalertuserstoview messagewithslightvibration.Afterseeing,shortpresspowerkeytodeletethis message;Ifhavemultipleunreadmessages,shortpresspowerkeytodeletethe currentmessagetogetnextone. Moreoperation:Scan"usinghelp"QRcodeonthebackcovertoview the detailedoperationguide,commonproblemsandtheAPPusinghelp. 3、 ChargingMethod   Connectoneendofthechargingcabletothechargerof5Voutputpowerthat conforms to the national standard , or to USB interface on computer, mobile power charger, etc., then charge in a dry environment making sure that the magneticsuctionchargerandwatchcharginginterfacearecoincided each other.Slight heat releasing from device in charging process belongs to the normalphenomenon.Generallybatterycanbefilledwith2-3hourscharging.   4、 Notes （1）Donotsoakthewatchinwateroranyotherliquid(nocontacting withcorrosiveliquid); （2）Pleasedonotputthewatchindust,hightemperature,highheat, extremepressure,strongradiationenvironment;        （3）Pleaseusecleansoftcottonclothtocleanthewatchtoavoiddirt depositionaffectingdevicenormaluseorwearer’shealth; （4）Thisproductdoesn'tworkwithoutpowerandoutsideservicearea;  （5）WhenthedeviceshowslowpowerorAPPreceiveswatch’slow powerreminder,pleaserechargeit; （6）Pleaseuse5Voutputpowerthatconformstothenationalstandard andtheoriginalrechargeablecabletocharge; （7）Don’tdisassembleandremodelthedevicefreelytoavoidany troubleordanger. Special statement: This product has the function of positioning, tracking and remote recording, only used for the guardian’s legal guardianshipfortheir own children, please do not use it for any illegal way.  All responsibility and consequencescausedbyuser'simproperoperationormisusewillbetakenby theusersthemselves,andhasnothingtodowithourcompany.  5、 After-salesservice     （1）Thisproductfollowsthenational“threeguarantees”policy,since thedateofpurchase,withshoppinginvoiceandwarrantycard,userscanenjoy one-yearfreewarrantyservicefordevicebody(exceptappearancewear). （2） The division of the following situations caused by man-madefault willnotenjoyfreewarrantyservice: A、All kinds of fault caused by  disassembly and remodeling without authorization;  B、Devicefailureduetothebadtransportorotherforcemajeurefactors; C、Devicefailureduetothelackofreasonablemaintenance;  D、Fault caused by the violation of common sense or not according to instructionandimproperoperation; （3）Maintenanceservicesoutsidethescopeofthewarrantywillbe chargedaccordingtotheprovisionsofvendors.  （4）Forafter-salesservice…

Text truncated - open the document above for the full version.

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EUT View 3 EUT View 4 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EUT View 5 EUT View 6 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EUT View 7

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AGDI32NXBOTRGP00X Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E Solder Board-Component View 1 Solder Board-Component View 2 WiFi Antenna Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E Solder Board-Component View 3 Solder Board-Component View 4 SIM slots Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E Antenna View GPS Antenna GSM Antenna

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137H Page 1 of 52 SAR Report FCC SAR Measurement and Test Report For Hellatron S.p.A Via Alberto mario 65 Milano Italy FCC ID: 2AGDI32NXBOTRGP00X FCC Rules: FCC Part 2.1093 ANSI / IEEE C95.1 :2005 ANSI / IEEE C95.3 :2002 IEEE 1528 :2013 Product Description: BODYGUARD Tested Model: 32NXBOTRGP002 Report No.: STR15108137H Tested Date: 2015-10-26 to 2015-10-27 Issued Date: 2015-10-28 Tested By: Vigoss Liang / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM. Test Technology Co., Ltd. Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137H Page 2 of 52 SAR Report TABLE OF CONTENTS 1. General Information ................................................................................................................................................... 3 1.1 Product Description for Equipment Under Test (EUT) ......................................................................................... 3 1.2 Test Standards .................................................................................................................................................... 5 1.3 Test Methodology ................................................................................................................................................ 5 1.4 Test Facility ......................................................................................................................................................... 5 2. Summary of Test Results .......................................................................................................................................... 6 3. Specific Absorption Rate (SAR) ................................................................................................................................ 7 3.1 Introduction .......................................................................................................................................................... 7 3.2 SAR Definition ..................................................................................................................................................... 7 4. SAR Measurement System ........................................................................................................................................ 8 4.1 The Measurement System .................................................................................................................................. 8 4.2 Probe ................................................................................................................................................................... 8 4.3 Probe Calibration Process ................................................................................................................................. 10 4.4 Phantom ............................................................................................................................................................ 11 4.5 Device Holder .................................................................................................................................................... 11 4.6 Test Equipment List ........................................................................................................................................... 12 5. Tissue Simulating Liquids ....................................................................................................................................... 13 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 13 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 14 5.3 Tissue Calibration Result ................................................................................................................................... 15 6. SAR Measurement Evaluation ................................................................................................................................ 16 6.1 Purpose of System Performance Check ............................................................................................................ 16 6.2 System Setup .................................................................................................................................................... 16 6.3 Validation Results .............................................................................................................................................. 17 7. EUT Testing Position ............................................................................................................................................... 18 7.1 Wrist-worn device .............................................................................................................................................. 18 7.2 EUT Antenna Position ....................................................................................................................................... 18 8. SAR Measurement Procedures ............................................................................................................................... 19 8.1 Measurement Procedures ................................................................................................................................. 19 8.2 Spatial Peak SAR Evaluation ....................................................................................................…

Text truncated - open the document above for the full version.

Ref : ACR.154.4.15.SATU.A SHENZHEN SEM.TEST TECHNOLOGY CO., LTD. 1/F, BUILDING A, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD BAO'AN DISTRICT SHENZHEN (518101), CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 09/13 EP168 Calibrated at MVG US 2105 Barrett Park Dr. - Kennesaw, GA 30144 06/03/2015 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions. COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.154.4.15.SATU.A Page: 2/9 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function DateSignature Prepared by : Jérôme LUC Product Manager 6/3/2015 Checked by : Jérôme LUC Product Manager 6/3/2015 Approved by : Kim RUTKOWSKI Quality Manager 6/3/2015 Customer Name Distribution : Shenzhen SEM.Test Technology Co., Ltd. Issue Date Modifications A 6/3/2015 Initial release COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.154.4.15.SATU.A Page: 3/9 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.5 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 5 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 7 5.4 Isotropy _________________________________________________________________ 8 6 List of Equipment ...................................................................................................... 9 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.154.4.15.SATU.A Page: 4/9 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE5 Serial Number SN 09/13 EP168 Product Condition (new / used) Used Frequency Range of Probe 0.7 GHz-3GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.224 M: Dipole 2: R2=0.234 M: Dipole 3: R3=0.229 M: A yearly calibration interval is recommended. 2PRODUCT DESCRIPTION 2.1GENERAL INFORMATION MVG¶V&2026$5(ILHOG3UREHVDUHEXLOWLQDFFRUGDQFHWRWKH,(((OET 65 Bulletin C and CEI/IEC 62209 standards. Figure 1±MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 4.5 mm Maximum external diameter 8 mm Probe Tip External Diameter 5 mm Distance between dipoles / probe extremity 2.7 mm 3MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C, CENELEC EN50361 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.154.4.15.SATU.A Page: 5/9 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 - 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plastic box illuminated with the fields from …

Text truncated - open the document above for the full version.

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 Page 1 of 43 FCC Part 22H&24E FCC Part 22H & 24E Measurement and Test Report For Hellatron S.p.A Via Alberto mario 65 Milano Italy FCC ID: 2AGDI32NXBOTRGP00X FCC Rules: FCC Part 22H, FCC Part 24E Product Description: BODYGUARD Tested Model: 32NXBOTRGP002 Report No.: STR15108137I-1 Tested Date: 2015-10-19 to 2015-10-27 Issued Date: 2015-10-28 Tested By: Vigoss Liang / Engineer Reviewed By: Silin Chen / EMC Manager Approved & Authorized By: Jandy So / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM. Test Technology Co., Ltd. Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 Page 2 of 43 FCC Part 22H&24E TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 3 1.2 TEST STANDARDS ................................................................................................................................................... 4 1.3 TEST METHODOLOGY ............................................................................................................................................. 4 1.4 TEST FACILITY ....................................................................................................................................................... 4 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 5 1.6 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 7 3. RF EXPOSURE ......................................................................................................................................................... 8 3.1 STANDARD APPLICABLE ......................................................................................................................................... 8 3.2 TEST RESULT.......................................................................................................................................................... 8 4. RF OUTPUT POWER .............................................................................................................................................. 9 4.1 STANDARD APPLICABLE ......................................................................................................................................... 9 4.2 TEST PROCEDURE ................................................................................................................................................... 9 4.3 ENVIRONMENTAL CONDITIONS .............................................................................................................................. 9 4.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 10 5. PEAK-TO-AVERAGE RADIO (PAR) OF TRANSMITTER ............................................................................. 13 5.1 STANDARD APPLICABLE ....................................................................................................................................... 13 5.2 TEST PROCEDURE ................................................................................................................................................. 13 5.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 13 5.4 SUMMARY OF TEST RESULTS ............................................................................................................................... 14 6. EMISSION BANDWIDTH ..................................................................................................................................... 15 6.1 STANDARD APPLICABLE ....................................................................................................................................... 15 6.2 TEST PROCEDURE ................................................................................................................................................. 15 6.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 15 6.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 16 7. OUT OF BAND EMISSIONS AT ANTENNA TERMINAL ............................................................................... 23 7.1 STANDARD APPLICABLE ....................................................................................................................................... 23 7.2 TEST PROCEDURE ................................................................................................................................................. 23 7.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 23 7.4 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 24 8. SPURIOUS RA…

Text truncated - open the document above for the full version.

Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Spurious Radiation Test Setup (9kHz to 30MHz) Spurious Radiation Test Setup (30MHz to 1G) Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E Spurious Radiation Test Setup (Above1G) Extreme Condition Test Setup Shenzhen SEM.Test Technology Co., Ltd. Report No.: STR15108137I-1 FCC Part 22H&24E Mobile Communication Test Setup