2AGGZ003B9ACA60Push PRO Remote

C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALEDWG 1 OF 1REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER SCALE 1:2 REVDESCRIPTIONDRAWN BYPROJECTDATE 1.0Artwork createdHTPCR-24101 16 MAR 2026 1.1Updated part number to end in r2PVPCR-2410129 MAY 2926 MT02-0101-NNN014 _PACKAGING MT02-0101-NNN014_PACKAGING AUTOMATE | PUSH PRO REMOTE 1.1 P. VITALE29 MAY 2026 WHITE

Push PRO Remote - 433MHz Antenna Friday, 4 October 2024 Page 1 of 1 Issue No: A Antenna transmission frequency: 433.92MHz Antenna type: PCB antenna Antenna Gain: 3 dBi

TÜ V SÜ D Asia Ltd., Taiwan Branch 7F., No. 37, Sec. 2, Zhongyang S. Rd., Beitou District, Taipei City, 11270, Taiwan (R.O.C.) Phone: + 886 2 2898-6818 Fax: + 886 2 2895-1598 Revision: 1.0 Effective: 2024-06-07 Page 1 of 42 RF Test Report Report Number : 6128626025802 Applicant : Rollease Acmeda Inc. Product : Push PRO Remote Brand : AUTOMATE Model : MT02-0101-067013 r2 FCC ID : 2AGGZ003B9ACA60 In accordance with FCC rule part §15.231 RESPONSIBLE FOR NAME SIGNATURE DATE Approved By Jack Chang 2026-07-28 Prepared By Ariel Hsu 2026-07-28 Signatures in this approval box have checked this document in line with the requirements of TÜ V SÜ D Product Service control rules. EXECUTIVE SUMMARY TÜ V SÜ D Asia Ltd., reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜ V SÜ D Asia Ltd. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜ V SÜD Asia Ltd. issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 6128626025802 Page 2 of 42 Contents 1 General Information ....................................................................................................................3 1.1 Report Modification Record ...........................................................................................................3 1.2 Introduction ....................................................................................................................................3 1.3 Applied Standard ...........................................................................................................................4 1.4 Deviation from standards ..............................................................................................................4 1.5 List of applied test(s) of the EUT ...................................................................................................4 2 General EUT Information ............................................................................................................5 2.1 Technical Specification of EUT .....................................................................................................5 2.2 Antenna List ..................................................................................................................................5 2.3 Accessory of EUT ..........................................................................................................................5 2.4 Variation of family model(s) ...........................................................................................................6 3 Configuration of Equipment .......................................................................................................7 3.1 Equipment used ............................................................................................................................7 3.2 Cable(s) used ................................................................................................................................7 3.3 System configuration .....................................................................................................................8 4 General Test Configurations ................................................................................................... 10 4.1 Description of test mode ............................................................................................................ 10 4.2 Test Condition ............................................................................................................................ 11 5 Test Result ................................................................................................................................ 12 5.1 Transmitter Requirement & Test Suites ..................................................................................... 12 5.2 Field Strength of Fundamental Emissions ................................................................................. 12 5.3 Radiated Spurious Emissions .................................................................................................... 15 5.4 Emission Bandwidth ................................................................................................................... 18 5.5 Time for Ceasing Tranmission（Optional for manually Transmitter） ...................................... 19 5.6 Duty cycle ................................................................................................................................... 20 5.7 AC Mains Conducted Emission .................................................................................................. 21 6 Measurement Uncertainty ....................................................................................................... 22 Appendix A. Test Equipment ................................................................................................................... 23 Appendix B. Duty cycle ............................................................................................................................. 24 Appendix C. Emission Bandwidth ............................................................................................................ 25 Appendix D. Time for Ceasing Transmission ........................................................................................ 27 Appendix E. Fiel…

Text truncated - open the document above for the full version.

Report No: 709502405790-01C EMC_SHA_F_R_02.06E TÜV SÜD Products Testing (Shanghai) Co., Ltd. 1F, No.16, Lane 1951 Duhui Road, Shanghai, 201108, People's Republic of China Tel: +86 021 60376300 Page 1 of 3 Rev. 26.00 RF Exposure Estimation 1. Introduction Applicant: Rollease Acmeda Inc Address: 7th Floor / 750 East Main Street,Stamford, CT 06902, USA Product: Push Pro Remote FCC ID: 2AGGZ003B9ACA60 Model No.: MT02-0101-067013 r2, MT02-0101-050013 r2, MT02-0101-067014 r2, MT02-0101-050014 r2, MT02-0101-067018 r2, MT02-0101-050018 r2 Reference RF report # 6128626025701, 6128626025801 2. 447498 D04 Interim General RF Exposure Guidance v01 B.2 Blanket 1 mW Blanket Exemption The 1 mW Blanket Exemption of § 1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power of no more than 1 mW, regardless of separation distance. The 1 mW blanket exemption applies at separation distances less than 0.5 cm, including where there is no separation. This exemption shall not be used in conjunction with other exemption criteria other than those for multiple RF sources in paragraph § 1.1307(b)(3)(ii)(A). The 1 mW exemption is independent of service type and covers the full range of 100 kHz to 100 GHz, but it shall not be used in conjunction with other exemption criteria or in devices with higher-power transmitters operating in the same time-averaging period. Exposure from such higher-power transmitters would invalidate the underlying assumption that exposure from the lower-power transmitter is the only contributor to SAR in the relevant volume of tissue. 3. RF Exposure Evaluation Per the test report included herein, for 433.92MHz According to C63.10-2020 Annex G EIRP = pt × gt =( E × d) 2 /30 (G.1) where pt is the transmitter output power in watts gt is the numeric gain of the transmitting antenna (dimensionless) E is the electric field strength in V/m d is the measurement distance in meters (m) ERP = EIRP /1.64 = (E x d) 2 / (30 x 1.64) = (E x d) 2 / 49.2 (G.2) Transmitter output power for 433.92MHz Function Field strength (E): 84.38 (dBuV/m) = 0.0166 (V/m) Measurement distance (d): 3 (m) ERP (W): 0.00005(W) ERP (mW): 0.05(mW) Report No: 709502405790-01C EMC_SHA_F_R_02.06E TÜV SÜD Products Testing (Shanghai) Co., Ltd. 1F, No.16, Lane 1951 Duhui Road, Shanghai, 201108, People's Republic of China Tel: +86 021 60376300 Page 2 of 3 Rev. 26.00 We used the maximum ERP/EIRP to perform RF exposure exemption evaluation. Evaluation method Exempt Limit (mW) Verdict ◼ Blanket 1 mW Blanket Exemption 1mW Yes  SAR-based Exemption (Pth) 7mW (ERP) N/A  MPE-based Exemption (ERP) 3060mW N/A So, the device is qualified for SAR test exemption, the exemption report is in lieu of the SAR report. 4. Limit and Guidelines on Exposure to Electromagnetic Fields According to§15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 Mobile Portable RF Exposure v05r02, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. 5. RF Exposure Evaluation 2.4G BLE: [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Conducted Power + tune up tolerance =4.24dBm+1dB=5.24dBm= 3.34mW Distance = 5 m f = 2402 GHz [3.34/5] * SQRT (2.402) =1.035 1.035≤ 3.0 According to KDB 447498 D04 v01 clause 2.2.3, This ratio is defined as SPLSR = (SAR1 + SAR2) 1.5 /Ri, where SAR1 and SAR2 are the highest reported SAR or estimated SAR [Glossary] values for the two sources in the pair i, and Ri is their distance in millimeters. When SPLSR ≤ 0.04 (rounded to two decimal digits), for all antenna pairs in the configuration, then the device qualifies for 1-g SAR test exemption. So, SPLSR = (SAR1 + SAR2) 1.5 /Ri =(0.05+1.035) 1.5 /30=0.037 less than 0.04 and the device qualifies for 1-g SAR test exemption. Report No: 709502405790-01C EMC_SHA_F_R_02.06E TÜV SÜD Products Testing (Shanghai) Co., Ltd. 1F, No.16, Lane 1951 Duhui Road, Shanghai, 201108, People's Republic of China Tel: +86 021 60376300 Page 3 of 3 Rev. 26.00 - TÜV SÜD Products Testing (Shanghai) Co., Ltd. FCC-Registration No.: 820234 Designation Number: CN1183 ISED Company Number: 31668 CAB identifier: CN0101 Reviewed by: Prepared by: Tested by: _____________________ _____________________ ______________________ Hui TONG Jiaxi XU Tianji XU EMC Section Manager EMC Project Engineer EMC Test Engineer Date: July 10, 2026 Date: July 10, 2026 Date: July 10, 2026 -------------------------------------------------------End of Test Report--------------------------------------------------------------------

C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALEDWG 1 OF 1REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER SCALE 1:2 REVDESCRIPTIONDRAWN BYPROJECTDATE 1.0Artwork createdDRNPD-22008 04 SEP 2024 1.1Added FCC & IC IDDRNPD-2200807 NOV 2024 1.2Update FCC & IC IDH .TPCR-2410113 MAR 2026 1.3Updated part number to end in r2P.VPCR-2410129 MAY 2026 MT02-0101-NNN018 _PACKAGING MT02-0101-NNN018 _PACKAGING BB | SHC PUSH PRO REMOTE 1.3 P. VITALE29 MAY 2026

C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALEDWG 1 OF 1REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER SCALE 1:2 REVDESCRIPTIONDRAWN BYPROJECTDATE 1.0Artwork createdSBNPD-22008 04 JAN 2024 1.1Fixed part numberPVNPD-2200828 JUN 2024 1.2Added FCC & IC IDDRNPD-2200807 NOV 2024 1.3Template updateDRNPD-2200811 NOV 2024 1.4Update FCC & IC IDH .TPCR-2410113 MAR 2026 1.5Updated part number to end in r2P.VPCR-2410129 MAY 2026 MT02-0101-NNN013 _PACKAGING MT02-0101-NNN013_PACKAGING AUTOMATE | PUSH PRO REMOTE 1.5 P. VITALE29 MAY 2026 Push PRO Push PRO WHITE WHITE

30mm 27.5mm C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 1 OF 2 ITEM NO.DESCRIPTION 1PRODUCT LABEL REVDESCRIPTIONPROJECTDRAWN BYDATE 1.0CREATE NEW LABELPCR-24101H .T16 MAR 2026 1.1Added r2 to end of part numberPCR-24101P.V29 MAY 2026 MT02-0101-NNN014_PLAB MT02-0101-NNN014_PLAB TSS | PUSH PRO REMOTE 1.1 NOTES FOR PRINTING: Product Label Location 1 TRANSPARENT LABEL NOTE: BOX LABEL NO LONGER REQUIRED - ABSORBED BY PHYSICAL PACKAGING SPECIFICATION, SEE BOX ART. BlackWhite LABEL 2.270 57.65 6.012 152.70 AA BB CC DD EE FF 4 4 3 3 2 2 1 1 DRAWN CHK'D APPV'D MFG Q.A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: FINISH: DEBURR AND BREAK SHARP EDGES NAME SIGNATURE DATE MATERIAL: DO NOT SCALE DRAWING REVISION TITLE: DWG NO. SCALE:1:1SHEET 3 OF 3 A4 - - WEIGHT: 82.0782.07 - - - - 24 Oct 2023 - MT02-0101-xxx013 - for label only AUTOMATE | Push Pro Remote 01 SCALE 1:2 P. VITALE29 MAY 2026 TSS | Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-067014 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. TSS | Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-050014 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. TSS | Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-xxx014 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 2 OF 2 WEEE LOGO For US Market min. 7mm height For US Market Add if mention radio frequency on eng drw Obsolete For EU Market Electronic Label Following screens are correct as per FW version: 2.1.x P. VITALE29 MAY 2026 MT02-0101-NNN014_PLAB MT02-0101-NNN014_PLAB TSS | PUSH PRO REMOTE 1.1 r2

30mm 27.5mm C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 1 OF 2 LABEL 2.270 57.65 6.012 152.70 AA BB CC DD EE FF 4 4 3 3 2 2 1 1 DRAWN CHK'D APPV'D MFG Q.A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: FINISH: DEBURR AND BREAK SHARP EDGES NAME SIGNATURE DATE MATERIAL: DO NOT SCALE DRAWING REVISION TITLE: DWG NO. SCALE:1:1SHEET 3 OF 3 A4 - - WEIGHT: 82.0782.07 - - - - 24 Oct 2023 - MT02-0101-xxx013 - for label only AUTOMATE | Push Pro Remote 01 Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-xxx013 r2 Input: 5VDC, 500mA automateshades.com NOTES FOR PRINTING: Product Label Location 1 ITEM NO.DESCRIPTION 1PRODUCT LABEL 5031236 A/V I.C.T.E. A division of Rollease Acmeda MT02-0101-NNN013_PLAB MT02-0101-NNN013_PLAB AUTOMATE | PUSH PRO REMOTE 2.2 P.VITALE25 MAY 2026 TRANSPARENT LABEL NOTE: BOX LABEL NO LONGER REQUIRED - ABSORBED BY PHYSICAL PACKAGING SPECIFICATION, SEE BOX ART. BlackWhite SCALE 1:2 REVDESCRIPTIONPROJECTDRAWN BYDATE 1.0 - 1.2Create New Label, Layout Update, Part Number UpdateNPD-22008P.V5 JAN 2024 1.3Updated Label Shape & Increased Size of Compliance LogosNPD-22008D.R27 FEB 2024 1.4Updated Intertek Number to xxx (Pre Compliance Label)NPD-22008D.R03 MAY 2024 1.5Updated Intertek Number 5030537NPD-22008D.R10 SEP 2024 1.6Added A/V I.C.T.E. & Automate LogoNPD-22008D.R12 SEP 2024 1.7ETL Mark Was Updated- “ Recognized Components’’ RemovedNPD-22008D.R13 SEP 2024 1.8Added “ A Division Of Rollease Acmeda” under AutomateNPD-22008D.R19 SEP 2024 1.9Updated ETL No. 5031236NPD-22008D.R07 NOV 2024 2.0Added Sheet 2 For Electronic Label as per Firmware Revision 2.0.xPCR-24101D.R11 DEC 2025 2.1Update Pg 2 About interface with new FCC & IC IDPCR-24101H .T12 MAR 2026 2.2Updated Part number to end in r2PCR-24101P.V29 MAY 2026 Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-067013 r2 Input: 5VDC, 500mA automateshades.com 5031236 A/V I.C.T.E. A division of Rollease Acmeda Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-050013 r2 Input: 5VDC, 500mA automateshades.com 5031236 A/V I.C.T.E. A division of Rollease Acmeda C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 2 OF 2 MT02-0101-NNN013_PLAB MT02-0101-NNN013_PLAB AUTOMATE | PUSH PRO REMOTE 2.2 P. VITALE29 MAY 2026 WEEE LOGO For US Market min. 7mm height For US Market Add if mention radio frequency on eng drw Obsolete For EU Market Electronic Label Following screens are correct as per FW version: 2.1.x r2

30mm 27.5mm C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 1 OF 2 ITEM NO.DESCRIPTION 1PRODUCT LABEL REVDESCRIPTIONPROJECTDRAWN BYDATE 1.0CREATE NEW LABELNPD-22008D.R28 Aug 2024 1.1UPDATED INTERTEK NUMBER 5030537PCR-23039D.R10 SEP 2024 1.2ADDED A/V I.C.T.E. & SHC LOGO, REMOVED “ RECOGNIZED COMPONENTS’’PCR-23039D.R12 SEP 2024 1.3UPDATED ETL NO. 5031236NPD-22008D.R07 NOV 2024 1.4Added Sheet 2 For Electronic Label as per Firmware Revision 2.0.xPCR-24101D.R11 DEC 2025 1.5Update Pg 2 About interface with new FCC & IC IDPCR-24101H .T12 MAR 2026 1.6Added r2 to end of part numberPCR-24101P.V29 MAY 2026 MT02-0101-NNN018_PLAB MT02-0101-NNN018_PLAB BB | SHC PUSH PRO REMOTE 1.6 NOTES FOR PRINTING: Product Label Location 1 TRANSPARENT LABEL NOTE: BOX LABEL NO LONGER REQUIRED - ABSORBED BY PHYSICAL PACKAGING SPECIFICATION, SEE BOX ART. BlackWhite LABEL 2.270 57.65 6.012 152.70 AA BB CC DD EE FF 4 4 3 3 2 2 1 1 DRAWN CHK'D APPV'D MFG Q.A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: FINISH: DEBURR AND BREAK SHARP EDGES NAME SIGNATURE DATE MATERIAL: DO NOT SCALE DRAWING REVISION TITLE: DWG NO. SCALE:1:1SHEET 3 OF 3 A4 - - WEIGHT: 82.0782.07 - - - - 24 Oct 2023 - MT02-0101-xxx013 - for label only AUTOMATE | Push Pro Remote 01 SCALE 1:2 Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-050018 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-xxx018 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. Push PRO Remote 9.5W X 7.5H ! 10W X 10H WEEE LOGO For US Market min. 7mm height For EU Market MT02-0101-067018 r2 Input: 5VDC, 500mA 5031236 A/V I.C.T.E. P. VITALE29 MAY 2026 C PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED. COPYRIGHT 2026 DIMENSIONS IN MILLIMETERS DRAWN BY: DRAWN DATE: APPROVED BY: DRAWING NUMBER: PART NUMBER: TITLE: DO NOT SCALE SCALE 1:1 REV. SIZE: A4 PRODUCT MANAGERPROJECT LEADCOMPLIANCE ENGINEER DWG 2 OF 2 MT02-0101-NNN018_PLAB MT02-0101-NNN018_PLAB BB | SHC PUSH PRO REMOTE 1.6 WEEE LOGO For US Market min. 7mm height For US Market Add if mention radio frequency on eng drw Obsolete For EU Market Electronic Label Following screens are correct as per FW version: 2.1.x P. VITALE29 MAY 2026 r2

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-08-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AGGZ003B9ACA60 [Rollease Acmeda Inc] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Rollease Acmeda Inc] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Applicant printed name: Jonny, Emilio Matuichuk Rev 1/26/2023

1 of 3 FCC/IC e-label Information Product Name: Push PRO Remote FCC ID: 2AGGZ003B9ACA60 IC ID: 21769-003B9ACA60 1) FCC and IC Electronic Label Information: The information that will be displayed on the e-label and information that will remain in the user manual (e-manual), quick start guide (hard copy-shipped with the product), packaging and the physical label are shown below: Information On E-Label On E-Manual On Quick Start Guide On Product Label On Product Packaging FCC / IC ID numbers Yes Yes Yes - Yes FCC / IC warning statements Yes Yes Yes - - FCC Logo Yes Yes Yes - - Product name /model number Yes Yes - Yes Yes Images of the e-label screen of Push PRO remote are provided below: 2 of 3 2.1) Access to the required information on the e-label- FCC KDB784748 D02 Requirements Push PRO Remote: e-label for USA Section 3 -Information that can be displayed electronically -Any information required by other rules to be provided in a physical form Yes - The e-label in the device displays the model number and FCC IC ID. All other information required by FCC is provided in the physical lable, manual, and packaging of the Device. Section 4.1 User Steps to Access Information Yes - Users can access the information in no more than 3 steps in the device’s main menu. The actual steps are: Enter Main Menu > About > e-label The ‘’Regulatory Information” menu option, on the e-label page will display the additional regulatory information. Section 4.2 Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. Yes - The information about how to access e-label is provided by below methods to the user: - QSG: A hard copy of QSG will be supplied inside the remote’s packaging - Electronic Manual: Is provided electronically in Rollease Acmeda’s Website Section 4.3 Readability of Regulatory Information Yes - The FCC ID, warning statements, and other regulatory information are displayed electronically in a manner that is legible without the aid of magnification. Section 4.4 Regulatory Information must be Secure Yes - e-label will be programmed on the remote only by the manufacturer and will not be modifiable or removable during normal authorized activities by a third party. Section 4.5 Physical and Temporary label for Purchasing and Importation Yes - A label will be put on the device, or device’s packaging, at the time of importation, marketing, and sales. Section 4.6 Additional Considerations N/A 2.2) Access to the required information on the e-label- ISED RSS-Gen Annex B (normative) – Electronic labeling (e-labelling) requirements Push PRO Remote : e-label for Canada B1 The e-label must display the following regulatory information: a. the ISED certification number and the model identification number for radio equipment b. any other information required to be provided on the surface of the device, unless such information is permitted to be included in the user manual or other packaging inserts Yes - The device’s e-lable will meet the requirements of B1.a and B1.b B2.1 Users shall be provided with clear instructions on how to access the regulatory information stored electronically (e-label). These instructions shall meet the following requirements: a. be provided in the user manual, operating instructions or packaging material (e.g. on the bags used to pack the device or on accompanying leaflets), or on a website related to the product b. not require the use of special access codes or accessories (e.g. SIM/USIM cards) c. not include more than three steps from the device’s main menu a. Yes - The information about how to access e-label is provided by below are methods for the user: - Quick Start Guide (QSG): A hard copy of QSG will be supplied inside the device’s packaging. - Electronic Manual b. Yes - The device does not require special code, accessories, or supplemental plug-ins to access the information. c. Yes - Users can access the information in no more than 3 steps in the device’s main menu. The actual steps are: Enter Main Menu > About > e-label The ‘’Regulatory Information” menu option, on the e-label page will display the additional regulatory information. B2.2 The e-label shall meet the following requirements: a. be easily accessible by the user a. Yes - e-label is easily accessible by the user. 3 of 3 b. not be modifiable by the user (e.g. if stored in the firmware or software menus) b. Yes - e-label cannot be modifiable by the user. B.3 Products utilizing e-labels are required to have a physical label on the product packaging at the time of importation, marketing and sales. The following conditions shall apply: a. For devices imported in bulk (not packaged individually), a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable to meet the physical label requirement. b. Any removable label used shall survive normal shipping and handling and must only be removed by the customer after purchase. For devices already imported in individual packages ready for sale, the information may alternatively be provided on the package and shall contain: i. The ISED certification number and the model identification number ii. Any other information required to be provided on the surface of the product unless such information is permitted to be included in the user manual or other packaging inserts. a. N/A b. Yes - A label will be put on the device, or device’s packaging, at the time of importation, marketing, and sales. B4 The information to be displayed on the e-label, as per section B1, shall meet the following security requirements: a. be programmed by the party responsible (e.g. manufacturer) b. not be modifiable or removable during the course of normal authorized activities by a third party (i.e. the typical user), such as installing applications or accessing menus a. Yes - e-label can be only programmed on the remote by the manufacturer. b. Yes - e-label is secured and cannot be modifiable or re…

Text truncated - open the document above for the full version.

Push PRO Remote - External Photos Model: MT02-0101-050013 r2 Push PRO Remote - External Photos Model: MT02-0101-067013 r2 Push PRO Remote - External Photos Model: MT02-0101-050014 r2 P…

Text truncated - open the document above for the full version.