2AGJ41KPPowered Subwoofer

4 For connection to a Stereo Receiver or Pream- plifier without auto-set-up, adjust the SB-1000 Pro volume to match the output of your main speakers, and adjust the low pass filter to blend the bass between the SB-1000 Pro and your speakers. If needed, consult with our Sound Experts on the best phase setting. For additional guidance on recommended crossover or low pass filter settings specific to your system, visit our Subwoofer Matching Tool at www.svsound.com/merlin, or contact our Sound Experts. For connection to an AV Receiver, set the SB-1000 Pro volume to -10 in the app (on the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always re-run set-up if you move the subwoofer to another location. The rear panel features an intuitive user interface with controls for adjusting the subwoofer’s primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase. Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the settings. Please note, some DSP settings can only be accessed using the SVS app. The SVS App is the easiest and most convenient way to access all of the advanced control features available on your SB-1000 Pro, from the comfort of your favorite seat. 1 Unbox It Quick Start Guide SB-1000 Pro Get Control 5 Get Calibrated HOME / VOLUME MOVIE PRESET LOW PASS FILTER OPTI ONS -22 10050 2040 200 0 6 4 2 0 -2 -4 -6 -8 -10 -12 PEQ1 ACTIVE PEQ2 ACTIVE PEQ3 DISABLED BOOST: 0 dB Q FACTOR: 1.2 FREQ: 200 Hz PARAMETRIC EQ AUTO EQ - START MIC INPUT If you followed the SB-1000 Pro Subwoofer unboxing instructions properly you will have the following items in front of you. Please confirm all pieces are available before continuing. Congratulations on choosing the SVS SB-1000 Pro, one of the most powerful and advanced subwoofers in the world. We know you’re anxious to get it cranking so the following steps will guide you through the quick and easy installation process. We strongly recommend reading the SB-1000 Pro Owner’s Manual to get the best possible performance out of your new subwoofer. You’ll find useful information about subwoofer placement, connections, DSP functions and more. The full SVS SB-1000 Pro Owner’s Manual can be found here: www.svsound.com/sb-1000-pro-manual Your SVS SB-1000 Pro Subwoofer can be controlled from the SVS Mobile App or via the rear panel for maximum flexibility when optimizing performance based on your room layout, speakers, system set-up and more. Download The App On The Subwoofer For iOS, Android, & Amazon Devices [SB-1000 Pro Subwoofer][Removable Grille] [Detachable Power Cord] + VOL LOW PASS LOW PASS PHASE PHASE 0° 90°180° 30Hz40Hz60Hz90Hz140HzLFE _ AUTO / ON UP (+) LOW PASS FREQUENCY PHASE VOLUME DOWN (-) REGISTERREG ISTER Register Your New SVS Product: Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts support requests, confirms your warranty registration and provides a proof of purchase. Plus, as a registered customer, you’ll be the first to get SVS news and updates. Register your product now at: www .svsound .com /register For most set-ups, a single RCA subwoofer interconnect cable running from the AV Receiver’s “SUB 1” output to the SB-1000 Pro’s “LFE” line level input is all that’s required to connect the subwoofer into your system. If you run separate Preamplifier and Power Amplifiers, follow the “Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels” connection guide below. Your subwoofer is also equipped with speaker level inputs as an alternate connection method. For all details and setup info, please see the full Owner’s Manual online at: www.svsound.com/sb-1000-pro-manual CENTER REARFRONT SUBWOOFER (SUB1) LINE LEVEL OUTPUTS L INPUT OUTPUT LFE RECEIVER/PREAMP 2 Set It Up 3 Hook It Up Need Help? Line Level Connection – Single LFE Channel Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels The location of your subwoofer in the listening environment can affect its performance. If possible, start with corner placement on the same wall as the front speakers, or anywhere along the front stage in between or outside of your main speakers. Our Sound Experts are standing by to help with subwoofer placement, installation, calibration, AV receiver settings, room rattle and anything else you need advice about. Just call, email or chat online with our Sound Experts: (877) 626-5623 | [email protected] | www.svsound.com Corner Placement: offers huge impact and reduces the potential to encounter bass nulls, or ‘dead spots’. If “boomi- ness” occurs, you can try pulling it away from the wall and using the DSP tuning controls to smooth performance. Front Placement: In between or to the side of the front channel speakers often results in the best blending with the main speakers and center channel and minimizes localiza- tion effects. Side Wall Placement: Side wall placement is less frequently used but can be an effective subwoofer location for excellent accuracy and output. LINE LEVEL OUTPUTS REARFRONT R L RECEIVER/PREAMP Review your product now at: www .svsound .com /review Review Your New SVS Product: Your SVS product is built with the highest standards of engineering excellence to achieve stunning sound quality and dynamics. Honest feedback is important to us and others making decisions about audio products. Please share your ownership experience with the SVS community by writing a review today. RE VIEW RE VIEW SAFETY INSTRUCTIONS •Read these instructions. •Keep these instructions. •Heed all warnings. •Follow all instructions. •Do not use this apparatus near water. •Clean only with dry cloth. •Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc- tions. •Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includingampli fi ers)thatp…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Specialty Technologies LLC 2020.09.10 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Specialty Technologies LLC _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2AGJ41KP Product Description: Powered Subwoofer Model: SB-1000 Pro, PB-1000 Pro Sincerely, Client’s signature Client’s name: Gary Rosenfeld Title: Chief Financial Officer Contact information / address: 340 Victoria Rd Youngstown Ohio 44515 United States

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template& Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 6.0 Specialty Technologies LLC 2020.09.10 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AGJ41KP Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name: Gary Rosenfeld Title: Chief Financial Officer Contact information / address: 340 Victoria Rd Youngstown Ohio 44515 United States SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 6.0 Specialty Technologies LLC 2020.09.10 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2AGJ41KP To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / /not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Internal Photos - Test Setup photos - External Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature Client’s name: Gary Rosenfeld Title: Chief Financial Officer Contact information / address: 340 Victoria Rd Youngstown Ohio 44515 United States

Family model description Letter SCS-F162 Japan Agency Authorization Letter (Ver1.0) Page 1 of 1 Rev1.0 (Specialty Technologies LLC) (Current Date) 2020-09-10 Product name Powered Subwoofer Brand name Test Model name SB-1000 Pro Additional model name PB-1000 Pro Deviation of models 1) Different appearance size (PB1000Pro is larger than SB1000Pro) 2) PB1000Pro has two more air ducts than SB1000Pro. SB1000Pro has no air ducts. 3) The overall structure of the horn is different. 4) The frame size of the speaker is also different. Signature: Client’s name: Gary Rosenfeld Title: Chief Financial Officer Company Name : Specialty Technologies LLC Company Address: 340 Victoria Rd Youngstown Ohio 44515 United States

Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 1 of 6 Report No.: HQ200701EL01 EUT Photos SB-1000 Pro Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 2 of 6 Report No.: HQ200701EL01 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 3 of 6 Report No.: HQ200701EL01 PB-1000 Pro Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 4 of 6 Report No.: HQ200701EL01 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 5 of 6 Report No.: HQ200701EL01 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Te l: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 6 of 6 Report No.: HQ200701EL01

Label and Location Label Location

Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 1 of 3 Report No.: HQ200701EL01 Internal photos of the EUT Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 2 of 3 Report No.: HQ200701EL01 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 3 of 3 Report No.: HQ200701EL01 ANT

Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 1 of 6 Report Version: V1.1.1 Test Report No.: HQ200701EL01-FM RF Exposure report Report No.: HQ200701EL01-FM FCC ID: 2AGJ41KP Applicant: Specialty Technologies LLC Address: 340 Victoria Rd Youngstown Ohio 44515 United States Manufacturer: Specialty Technologies LLC Address: 340 Victoria Rd Youngstown Ohio 44515 United States Product: Powered Subwoofer Brand: Test Model(s): SB-1000 Pro Series Model(s): PB-1000 Pro Test Date: Jul.16, 2020 ~ Jul. 29, 2020 Issued By: Hwa-Hsing (Dongguan) Testing Co., Ltd. Lab Address: No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China FCC Designation Number: CN1255 Standards: FCC Part 2 (Section 2.1091); IEEE C95.1 KDB 447498 D01 The above equipment has been tested by Hwa-Hsing (Dongguan) Testing Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : Date: Aug. 01, 2020 Tank Tan/Engineer Approved by : Date: Sep. 15, 2020 Harry Li/ Supervisor This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the federal government.The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 2 of 6 Report Version: V1.1.1 Test Report No.: HQ200701EL01-FM Table of contents Release control record ............................................................................................... 3 1. General Description of EUT ............................................................................. 4 2. RF exposure limit ............................................................................................. 5 3. MPE calculation formula .................................................................................. 5 4. Calculation result of maximum conducted power ............................................. 5 5. Appendix – Information on the Testing Laboratories ........................................ 6 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 3 of 6 Report Version: V1.1.1 Test Report No.: HQ200701EL01-FM Release control record Issue No. Reason for change Date issued HQ200701EL01-FM Original release Sep. 15, 2020 Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 4 of 6 Report Version: V1.1.1 Test Report No.: HQ200701EL01-FM 1. General Description of EUT Product Powered Subwoofer Brand FCC ID: 2AGJ41KP Test Model(s) SB-1000 Pro Series Model(s) PB-1000 Pro Status of EUT Engineering prototype Power Supply Rating AC120V/60Hz Modulation Type GFSK Transfer Rate 1 Mbps Operating Frequency 2402 ~ 2480MHz Number of Channel 40 Maximum Output Power 2.339mW Antenna Type PCB antenna with 4.16dBi gain Antenna Connector N/A Accessory Device AC Line: 2.0m, Un-shielding Data Cable Supplied N/A Note: 1. Please refer to the EUT photo document (Reference No.: HQ200701EL01) for detailed product photo. 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. 3. Models difference: 1) Different appearance size (PB-1000 Pro is larger than SB-1000 Pro) 2) PB-1000 Pro has two more air ducts than SB-1000 Pro. SB-1000 Pro has no air ducts. 3) The overall structure of the horn is different. 4) The frame size of the speaker is also different. Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1, Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 5 of 6 Report Version: V1.1.1 Test Report No.: HQ200701EL01-FM 2. RF exposure limit Limits for maximum permissible exposure (MPE) Limits for general population / uncontrolled exposure Frequency range (MHz) Electric…

Text truncated - open the document above for the full version.

Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park,HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 1 of 40 Test Report No.: HQ200701EL01-FI Test Report Report No.: HQ200701EL01-FI FCC ID: 2AGJ41KP Applicant: Specialty Technologies LLC Address: 340 Victoria Rd Youngstown Ohio 44515 United States Manufacturer: Specialty Technologies LLC Address: 340 Victoria Rd Youngstown Ohio 44515 United States Product: Powered Subwoofer Brand: Test Model(s): SB-1000 Pro Series Model(s): PB-1000 Pro Test Date: Jul.16, 2020 ~ Jul. 29, 2020 Issued By: Hwa-Hsing (Dongguan) Testing Co., Ltd. Address: No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China FCC Designation Number: CN1255 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipmenthas been tested by Hwa-Hsing (Dongguan) Testing Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 01, 2020 Tank Tan//Engineer Approved by : , Date: Sep. 16, 2020 Harry Li/ Supervisor This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the federal government.The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park,HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.:www.hwa-hsing.com E-Mail: [email protected] Page 2 of 40 Test Report No.: HQ200701EL01-FI Table of Contents Release Control Record .................................................................................................................................. 4 1. Summary of Test Results ........................................................................................................................... 5 1.1 Measurement Uncertainty ..................................................................................................................... 5 1.2 Modification Record .............................................................................................................................. 5 2. General Information ................................................................................................................................... 6 2.1 General Description of EUT .................................................................................................................. 6 2.2 Description of Test Channels ................................................................................................................ 7 2.3 Test Mode Applicability and Tested Channel Detail .............................................................................. 8 2.4 DutyCycle of Test Signal ....................................................................................................................... 9 2.5 Description of Support Units ............................................................................................................... 10 2.6 Configuration of System under Test .................................................................................................... 10 2.7 General Description of Applied Standards .......................................................................................... 10 3. Test types and results ............................................................................................................................... 11 3.1 Radiated Emission and Bandedge Measurement ............................................................................... 11 3.1.1 Limits of radiated emission and bandedge measurement .............................................................. 11 3.1.2 Test Instruments ............................................................................................................................ 12 3.1.3 Test Procedures ............................................................................................................................. 13 3.1.4 Deviationfrom Test Standard ......................................................................................................... 13 3.1.5 Test Set up ..................................................................................................................................... 14 3.1.6 EUT Operating…

Text truncated - open the document above for the full version.

Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 1 of 3 Report No.: HQ200701EL01 Set-up for conducted emission test Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 2 of 3 Report No.: HQ200701EL01 Set-up for radiated emission test Frequency Range: 30MHz~1GHz Hwa-Hsing (Dongguan) Testing Co., Ltd. No.101, Bld N1,Yuyuan 2Rd, Yuyuan Industrial Park, HuangJiang Town, Dongguan, China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Page 3 of 3 Report No.: HQ200701EL01 Frequency Range: Above 1GHz