2AGND-HAM-PROTwo Way Radio

1.1 Turn on/off the radio Turn on the radio: When the radio is off, turn the [Power/Volume] switch clockwise. After the radio makes a "click", the power of the radio is turned on. The screen displays the model of the radio. After a few seconds, the radio emits a beep. Turn off the radio: When the radio is turned on, turn the [Power/Volume] switch counterclockwise until the radio makes a "click" and the information displayed on the screen disappears, that is, turn off the power of the radio. 1.2 Volume adjustment When the radio is turned on, turn the [Power/Volume] switch to adjust the volume and the screen will indicate the current volume level through the progress bar. Turn clockwise to increase the volume; counterclockwise to decrease the volume. 1.3 Split screen display In standby mode, press the left and right arrows to switch the standby display 1,The user's name or call sign is displayed in single standby. 2, Display the last contact information received. Such as the name or call sign of the other party plus location information and location direction. (2,756 m) 3,Display a list of recently received contact information. Press the key to select the list of information to be viewed. Press [Select] key to enter to view the detailed location information and location direct ion of the other party when communicating.Press up/down arrows to scroll page. (only the latest 10 lists to be displayed, it will disappear when is turned off, and will not be saved) 1. 4 Main and sub channel switching In standby mode, press and hold the [Back key] to switch between the main and sub-channels, and the channel with large fonts displayed on the screen is the currently operable channel (main channel). 1. 5 VFO/Channel switching In standby mode, press and hold the * key to switch between VFO and channel. 1. 6 Set the VFO frequency ※ Set the VFO frequency of the radio through the keyboard: When the radio is in VFO mode, you can input the frequency of the main channel through the number keys, if you want to input For 434.62500MHz, just input 【4】【3】【4】【6】【2】【5】【0】【0】. Press * key to set step frequency, press # key to switch AM/FM ※ Adjust the VFO frequency/channel by the up and down arrow buttons: When the radio is in VFO mode, click the up and down arrows to adjust the frequency/channel by increasing/decreasing the step value. Up adjustments increase frequency values/channels, and down adjustments decrease frequency values/channels. 1. 7 Storage frequency In VFO mode, enter the frequency you want through the number keyboard, such as 438.500, press OK to confirm, press the menu "save to channel", select a blank channel to save. 1. 8 saving frequencies with CTCSS/DCS In VFO mode, input the frequency you want through the number keyboard, such as 438.500, press OK to confirm,Open the radio setting menu, enter the transmit TX/RX subtone menu, select the required subtone frequency, press OK to exit, press the menu "save to channel", select a blank channel to save. 1. 9 Edit channel Open the channel list menu, click Edit, edit the channel content, and save it 1. 10 Frequency Scanning Open the frequency scan menu, input the start frequency that you want, * key to switch the input frequency step, # key to switch the scan step, press the left and right arrows to start scanning, left to scan the frequency up, and right to scan the frequency down 1.11 Tone Scanning Set the frequency to be scanned on the standby page, open the Tone scan menu,it start working. 1.12 Bulk air copy Turn on the radios to be programmed one by one, switch the menu to “ receive channels”, open the programmed radio and switch the menu to “send channel “, when each radio to be programmed is displayed as completed, the frequency of the current list will be was copied to another radios. 2.0 Signaling Settings ID: Please input your call sign or your ID Allow Check:Allow your partner to send instructions to check your current location, and your location will be fedback to the partner's device. Signaling Preamble : When sending signaling, add a preset code to make the end tone sound more rounded Send Message: Send text message to partners Call: When the receiving device receives the CALL command, the radio will ring, please enter the ID to be searched Check:When the receiving device receives the CHECK command, the radio will feed back the current location, This requires the receiver ALLOW CHECK to be effective, enter the ID to be searched Nearby People: This option sends the CHECK command at the current frequency, and all radios of the same frequency will feedback their current position option please after receiving the command.This option requires the receiver ALLOW CHECK to be effective 3.0 ,APRS settings Call Sign: Please input your Call Sign Path:Choose the path for APRS 3.1 Digital Mode Enable: Turn On/Off the digital mode. Share Location: Set the transmission time of the shared location. When the sharing time is turned off and Enable is turned on, it means that only data is received at this time. Digital Channel : The channel currently used for data transmission Format: APRS:When using APRS protocol for transmission, the call sign must be obtained in advance before it can be used. BSS: Use our own BSS protocol, suitable for people who have not obtained a call sign. Digital Mute: The radio does not make data transmission sounds when transmitting data. Programmable Buttons Description Programmable Buttons, different shortcut operations can be realized through programming. [PF1] key/[PF2] key, this function can only be operated through APP, Default setting P1 short press:FM Radio long press:Sub-PTT P2 short press :power level Long Press :Squelch Open Toggle Some button states will restrict each other, so after setting, please confirm that all functions are available. Disable No Function Alarm According to the current frequency, the alarm warning will be issued, and the speaker of this equipment will also issue an alarm sound Alarm&Mute According to…

Text truncated - open the document above for the full version.

BTECH (BaoFeng Tech) 702 N Industrial Ave Arlington South Dakota United States 57212 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Product Name: Two Way Radio FCC ID: 2AGND-HAM-PRO 2.911(d)(7) USA Designated Agent for Service of Process We, BTECH (BaoFeng Tech) (“the applicant”) designate BTECH (BaoFeng Tech) NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: BTECH (BaoFeng Tech) Address: 702 N Industrial Ave Arlington South Dakota United States 57212 FRN：0025076514 Contact Name: Greg Wilson Telephone No: (01)605-983-1060 Email: [email protected] Signature: __________________ Greg Wilson , General Manager Date: Apr.26, 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. BTECH (BaoFeng Tech) 702 N Industrial Ave Arlington South Dakota United States 57212 2.911 (d)(7)USA Agent v1.5 Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

BTECH (Baofeng. Tech) 702 N Industrial Ave Arlington, SD 57212 United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.26, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AGND-HAM-PRO FRN：0025076514 BTECH (BaoFeng Tech) (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, ______________________ Greg Wilson, General Manager

BTECH (Baofeng. Tech) 702 N Industrial Ave Arlington, SD 57212 United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.26, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AGND-HAM-PRO FRN：0025076514 BTECH (BaoFeng Tech) (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ______________________ Greg Wilson, General Manager

BTECH (Baofeng. Tech) 702 N Industrial Ave Arlington, SD 57212 United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.26, 2024 Subject; Request for Confidentiality FCC ID: 2AGND-HAM-PRO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ______________________ Greg Wilson , General Manager

BTECH (Baofeng. Tech) 702 N Industrial Ave Arlington, SD 57212 United States Date: Apr.26, 2024 Declaration Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 with FCC ID: 2AGND-HAM-PRO Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Signature: ______________________ Greg Wilson, General Manager

Report No.: AGC16307240301AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC16307240301AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC16307240301AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC16307240301AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 40mm&30mm FCC ID:2AGND-HAM-PRO WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Report No.: AGC16307240301AP02 Page 1 of 7 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Walkie-Talkiea &FM Antenna Report No.: AGC16307240301AP02 Page 2 of 7 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC16307240301AP02 Page 3 of 7 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC16307240301AP02 Page 4 of 7 INTERNAL VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC16307240301AP02 Page 5 of 7 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) GPS Antenna Report No.: AGC16307240301AP02 Page 6 of 7 INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) BT Antenna Report No.: AGC16307240301AP02 Page 7 of 7 INTERNAL VIEW OF EUT (FIGURE 11) ****************************************End of Report*************************************

Page 1 of 9 RF Exposure Report Report No.: AGC16307240302FH01 FCC ID : 2AGND-HAM-PRO APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : BTECH MODEL NAME : HAM-PRO APPLICANT : BTECH (Baofeng. Tech) DATE OF ISSUE : Apr. 12, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16307240302FH01 Page 2 of 9 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 12, 2024 Valid Initial Release Report No.: AGC16307240302FH01 Page 3 of 9 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 6. Measurement Results ..................................................................................................................................... 9 7. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC16307240302FH01 Page 4 of 9 1. General Information Applicant BTECH (Baofeng. Tech) Address 702 N Industrial Ave Arlington, SD 57212 United States Manufacturer BTECH (Baofeng. Tech) Address 702 N Industrial Ave Arlington, SD 57212 United States Factory BTECH (Baofeng. Tech) Address 702 N Industrial Ave Arlington, SD 57212 United States Product Designation Two Way Radio Brand Name BTECH Test Model HAM-PRO Date of receipt of test item Mar. 25, 2024 Date of Test Mar. 25, 2024~Apr. 12, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Alan Duan (Project Engineer) Apr. 12, 2024 Reviewed By Calvin Liu (Reviewer) Apr. 12, 2024 Approved By Max Zhang Authorized Officer Apr. 12, 2024 Report No.: AGC16307240302FH01 Page 5 of 9 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Hardware Version Ver: U/V_N76-23128 Software Version 0.6.8 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK BLE GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 2.21dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC16307240302FH01 Page 6 of 9 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC16307240302FH01 Page 7 of 9 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 7.4V Report No.: AGC16307240302FH01 Page 8 of 9 4. Portable Device Evaluation Method and Limit Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below:  The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by:  [(max. power of channel, including tune-up tole…

Text truncated - open the document above for the full version.

VERO GLOBAL COMMUNICATION CO.LTD No.4 Chongmin St, Qingmeng Area,Quanzhou Fujian, P.R.C 362006 Antenna standing wave pattern Frequency Efficiency / %Gain/ dBi 2400MHz 39.540.78 2410MHz 44.871.81 2420MHz 38.91 2430MHz 43.151.4 2440MHz 37.240.84 2450MHz 46.882.15 2460MHz 42.271.63 2470MHz 45.921.97 2480MHz 41.781.86 2490MHz 46.032.21 2500MHz 44.061.89 Antenna 2.4G passive test data Phi 0 2D 240 Phi 90 2D 02450 Antenna test 2D3 Theta 90 2D 2500 D diagram

Page 1 of 73 FCC Test Report Report No.: AGC16307240302FR01 FCC ID : 2AGND-HAM-PRO APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : BTECH MODEL NAME : HAM-PRO APPLICANT : BTECH (Baofeng. Tech) DATE OF ISSUE : Apr. 12, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16307240302FR01 Page 2 of 73 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 12, 2024 Valid Initial Release Report No.: AGC16307240302FR01 Page 3 of 73 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies And Behaviour ............................................................................... 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ................................................................................................................................... 13 4.2 EUT Exercise ........................................................................................................................................... 13 4.3 Configuration of Tested System .............................................................................................................. 13 4.4 Equipment Used in Tested System ......................................................................................................... 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. RF Output Power Measurement .................................................................................................................. 16 6.1 Provisions Applicable .............................................................................................................................. 16 6.2 Measurement Procedure ......................................................................................................................... 16 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 16 6.4 Measurement Result ............................................................................................................................... 17 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 23 7.1 Provisions Applicable .............................................................................................................................. 23 7.2 Measurement Procedure ......................................................................................................................... 23 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 23 7.4 Measurement Results ............................................................................................................................. 24 8. Conducted Band Edge and Out-of-Band Emissions ..........................................…

Text truncated - open the document above for the full version.

Report No.: AGC16307240302AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC16307240302AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************