2AGZ3S01414Titan 24GHz 360 Radio

Starry Titan Poletop Mount Note the difference between two types of Side Arm. One set is notched to be matched with notch on Poletop Plate. Mount is loosely assembled, all fasteners snugged. One axis levelled, tightened, sec- ond “tilt” corrected with mallet, all fasten- ers tightened Tools: 13mm socket, socket for AEP-supplied pole bolts, mallet Starry Titan Poletop Mounting Radio 1. Complete radio head is preassmbled with a lifting eye. Open crate top and secure to lift/cherry picker arm. 2. The 4 bolts (circled) drop through keyholes in the poletop mount. Rotate radio ~6° to lock into place. Tool: 13mm combination wrench 3. Attach conduits Starry Titan Poletop Cabling Radios are pre-wired into the service box. 1.5” Conduits x2 Fiber 1gbps and 10gbps duplex per radio, 10mhz and pps signals (tncs) Power 4x 14awg (2 48vdc pairs) and 1x 6awg ground Starry Titan Poletop SFP Replacement 1. Loosen top cover side screws and captive top screws. Slide up and off the unit. 4. Gently lower radio to horizontal. Cable door is now accessible. Loosen lock knobs and swing down. 2. Unlock the side needing replacement: Loosen two bolts (13mm socket and exten- sion) 5. Swing locks down. Open cable door. Pull fiber. Unlock and remove SFP. Replace. Clean fiber and replace in socket. SFPs are here 3. Tilt radio out slightly. Slide bolt carrier (red) out of engagement with radio frame (orange) 6. Close door. Ensure all cables and fibers are correctly seated in door slots.(Cables not shown)

Starry, Inc. – Mutual Confidentiality Agreement MUTUAL CONFIDENTIALITY AGREEMENT This Mutual Confidentiality Agreement (this “Agreement”) is entered into as of the date last set forth on the signature page below (“Effective Date”) by and between Starry, Inc., a Delaware corporation (“Starry”), and ___________________, a ____________ corporation (“Counter Party”). The parties wish to protect and preserve the confidential and/or proprietary nature of information and materials that may be disclosed or made available to each other in connection with certain discussions, negotiations or dealings between the parties relating to a transaction between the parties (the “Purpose”). In consideration of the foregoing and the rights and obligations set forth herein, both parties hereby agree as follows: 1. CONFIDENTIAL INFORMATION. “Confidential Information” means, subject to Section 3, any and all information and material disclosed by the disclosing party (“Discloser”) to the receiving party (“Recipient”) or obtained by Recipient through inspection or observation of Discloser’s property or facilities (whether in writing, or in oral, graphic, electronic or any other form). Confidential Information, includes, without limitation, any (a) trade secret, know-how, idea, invention, process, technique, algorithm, program (whether in source code or object code form), hardware, device, design, schematic, drawing, formula, data, plan, strategy and forecast of, and (b) technical, engineering, manufacturing, product, marketing, servicing, financial, personnel, log-in or identification passwords and other information and materials of, Discloser and its employees, consultants, investors, affiliates, licensors, suppliers, vendors, customers, clients and other persons and entities. 2. NON-DISCLOSURE AND LIMITED USE. Recipient shall hold all Confidential Information in confidence and shall not disclose any Confidential Information to any third party, other than to its employees, managers, members, affiliates, consultants, attorneys, accountants, bankers and other advisors (collectively, “Representatives”) who need to know such information and who agree to be bound by the terms hereof or such other restrictions regarding disclosure and use of such information comparable to and no less restrictive than those set forth herein. Recipient shall be responsible for any breach of this Agreement by its Representatives. Recipient shall take the same degree of care that it uses to protect its own confidential and proprietary information and materials of similar nature and importance (but in no event less than reasonable care) to protect the confidentiality and avoid the unauthorized use, disclosure, publication or dissemination of the Confidential Information. Recipient shall not make any copies of the Confidential Information except to the extent reasonably necessary to carry out the Purpose, or unless otherwise approved in writing by Discloser. Except as required by law or as reasonably required to assert its rights hereunder, neither party shall disclose the existence or substance of the discussions between the parties or any terms of this Agreement or any related agreement between the parties (or any matters relating thereto) to any third party other than its Representatives, without the prior written consent of the other party. The obligations of this Section 2 with respect to any item of Confidential Information or any discussions or agreements between the parties shall survive any termination or expiration of this Agreement and continue for three (3) years from the date of Recipient’s receipt of such Confidential Information. 3. SCOPE. The obligations of this Agreement, including the restrictions on disclosure and use, shall not apply with respect to any Confidential Information to the extent such Confidential Information: (a) is or becomes publicly known through no act or omission of Recipient in breach of this Agreement; (b) was rightfully known by Recipient before receipt from Discloser; (c) becomes known to Recipient without confidential or proprietary restriction from a source other than Discloser that is not known by Recipient to owe a duty of confidentiality to Discloser with respect to such Confidential Information; or (d) is independently developed by Recipient without the use of or reference to the Confidential Information of Discloser. In addition, Recipient may use or disclose Confidential Information to the extent (i) approved in writing and in advance by Discloser or (ii) Recipient is legally compelled to disclose such Confidential Information, provided, however, that prior to any such compelled disclosure, Recipient shall, to the extent legally permitted and commercially practicable, give Discloser reasonable advance notice of any such disclosure to allow Discloser to seek a protective order to preserve the continued confidential treatment of the Confidential Information. 4. FEDERAL REGULATIONS. Recipient acknowledges and understands that any technical data/technology or source code controlled by the U.S. Munitions List (“USML”), 22 C.F.R. § 121.1, and/or the Commerce Control List (“CCL”), Supplement No. 1 to 15 C.F.R. Part 774, to which the Recipient may have access or which may be disclosed to the Recipient in the course of the engagement with Discloser or visit to the Discloser’s facility is subject to the U.S. International Traffic in Arms Regulations (22 C.F.R. Parts 120–130) and/or the U.S. Export Administration Regulations (15 C.F.R. Parts 730–774). Recipient agrees and certifies that all such export-controlled technical data/technology and source code will not be exported, re-exported, transferred, or otherwise disclosed or released via any means (e.g., oral disclosure, electronic transmission, visual access, facsimile Starry, Inc. – Mutual Confidentiality Agreement 2 message, telephone), whether in original form, modified, or incorporated in any other form, to any foreign person or any foreign cou…

Text truncated - open the document above for the full version.

1(2) Starry, Inc. May 27,2022 Attention: Application Examiner RE: Request for Confidentiality Applicant: Starry, Inc. FCC ID: 2AGZ3S01414 To Whom It May Concern: Pursuant to 47 C.F.R. §§ 0.457(d) and 0.459, Starry, Inc. (Starry) hereby requests short-term and long-term confidential treatment, as described below, for certain exhibits submitted in support of Starry’s application for certification of the equipment associated with the above-referenced FCC identifier. This equipment represents a unique technological implementation that contains certain intellectual property that would significantly harm Starry if revealed to its competitors or to parties that seek to replicate Starry’s equipment. Short-Term Confidentiality In order to avoid premature release of sensitive information prior to the marketing and public release of the equipment covered by this equipment certification application, Starry requests that the Commission treat the following exhibits as confidential until 45 days after the date the Grant of Equipment Authorization is issued. ● Test setup photos ● External photos Disclosure of the exhibits for which Starry seeks short-term confidential treatment during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and significantly diminish the value of our investment in research and development. Long-Term Confidentiality Starry requests that the Commission treat the following exhibits as permanently confidential: ● Schematics ● Detailed Block Diagrams ● Detailed Operational/Functional Description ● Tune up procedure ● Parts list ● Internal photos ● User Manual The exhibits for which Starry requests long-term confidential treatment all contain confidential, proprietary technical information that the Commission protects from disclosure as a type of record that is not routinely available for public inspection. 1 Starry has invested considerable time and materials in research and development to produce the referenced product. To protect its investment, Starry does not release this information in the ordinary course of its business because doing so would result in substantial competitive harm to Starry. Disclosure of these confidential exhibits to competitors would not only give them significant competitive advantages in developing similar 1 47 C.F.R. § 0.457(d). 2(2) products, but would also disclose successful implementation of unpublished, leading edge technology developed by Starry and could even reveal information about Starry’s unique economic model. Among the exhibits for which Starry seeks long-term confidential treatment are internal photos. It is appropriate to accord such treatment to the internal photos submitted for two reasons. First, some of these photos are scanning receiving internal photos, which, by rule, the Commission does not make available for inspection. 2 Second, long-term confidential treatment for all other internal photos is also warranted because the referenced product is a non-consumer device that is not sold to end users, nor is it accessible to the general public. These devices are mounted on the top of a large tower or in a locked area, such as a rooftop, and are only serviceable by professional, designated Starry technicians and partners under a Non-Disclosure Agreement (NDA). An example of the NDA between Starry and its technicians and partners is provided herein. Starry also seeks long-term confidential treatment for the user manual of the referenced product. The manual for this product contains confidential proprietary technical information and is only shared outside the company with professional, designated Starry technicians and partners under an NDA. The manual is not provided to end users because this is a non-consumer device that is not available for sale and end users of the device do not have access to it and cannot service it. Therefore, long-term confidential treatment of the user manual is also warranted. Sincerely, Robert M. White Senior Director, Product Realization and Mechanical Engineering Starry, Inc. 2 See 47 C.F.R. § 0.457(d)(1)(ii) (“Portions of applications for equipment certification of scanning receivers and related materials will not be made available for inspection.”).

Starry, Inc. May 20, 2022 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Starry, Inc. FCC ID: 2AGZ3S01414 To Whom It May Concern: We, Starry, Inc., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AGZ3S01411 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is May 20, 2022. The Limited Agency Agreement expires on July 23, 2023, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Robert M. White Senior Director, Product Realization and Mechanical Engineering 38 Chauncy Street, Suite 200 Boston, MA 02111

FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 1 Figure 1. Front Assy View, External FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 2 Figure 2. Side Assy View, External FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 3 Figure 3. Rear View, External FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 4 Figure 4. Opposite Side View, External FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 5 Figure 5. Top View, External FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 6 Figure 6. Grounding, External, Rear Assy View, 1x per radio. FCC ID 2AGZ3S01414 External Photographs Starry, Inc. Confidential and Proprietary 7 Figure 7. Titan 24_Connector Panel Interface, 1X per Radio

FCC ID 2AGZ3S01414 Location of the Unit Label 1 Figure 1. Unit Label is located behind the connector panel cover that is easily accessible without tools by loosening 2 large knobs and rotating swing bolt. FCC ID 2AGZ3S01414 Location of the Unit Label 2 Figure 2. Panel rotated to open position. Label show as installed.

STARRY, INC. MPE REPORT SCOPE OF WORK MPE CALCULATION – 24 GHz Titan Radio, Model Titan 24-360 REPORT NUMBER 105000232BOX-001.1 ISSUE DATE April 13, 2022 PAGES 10 DOCUMENT CONTROL NUMBER Non-Specific Radio Report Shell Rev. December 2017 © 2017 INTERTEK Non-Specific Radio Report Shell Rev. December 2017 Page 2 of 10 Starry, Inc., Model: 24 GHz Titan Radio, Model Titan 24-360 MPE REPORT (FULL COMPLIANCE) Report Number: 105000232BOX-001.1 Project Number: G104749253 Report Issue Date: April 13, 2022 Model(s) Tested: 24 GHz Titan Radio, Model Titan 24-360 Standards: FCC Part 1 Subpart I, February 2022 Procedures Implementing the National Environmental Policy Act of 1969 §1.1307 Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. Tested by: Client: Intertek 70 Codman Hill Road Boxborough, MA 01719 USA Starry, Inc. 38 Chauncy St, Suite 200 Boston, MA 02111 USA Report prepared by Report reviewed by Vathana Ven / EMC Engineering Supervisor Kouma Sinn / EMC Engineering Supervisor This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Report Number: 105000232BOX-001.1 Issued: April 13, 2022 Non-Specific Radio Report Shell Rev. December 2017 Page 3 of 10 Starry, Inc., Model: 24 GHz Titan Radio, Model Titan 24-360 Table of Contents 1 Introduction and Conclusion ..................................................................................................................... 4 2 Evaluation Summary ................................................................................................................................ 4 3 Client Information .................................................................................................................................... 5 4 Description of Equipment Under Test and Variant Models ......................................................................... 5 5 Power Density Calculation ........................................................................................................................ 6 6 Revision History ..................................................................................................................................... 10 Intertek Report Number: 105000232BOX-001.1 Issued: April 13, 2022 Non-Specific Radio Report Shell Rev. December 2017 Page 4 of 10 Starry, Inc., Model: 24 GHz Titan Radio, Model Titan 24-360 1 Introduction and Conclusion This evaluation report covers for a mobile device subject to routine environmental evaluation for RF exposure. A mobile device is defined as a transmitting device designed to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structurer(s) and the body of the user or nearby persons. The evaluation indicated in section 2.0 were performed on the product constructed as described in section 4.0. The remaining sections are the verbatim text from the actual evaluation during the investigation. These sections include the evaluation name, the specified Method, and Results. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product evaluated complies with the requirements of the standard(s) indicated. The results obtained in this report pertain only to the item(s) evaluated. Intertek does not make any claims of compliance for samples or variants which were not evaluated. 2 Evaluation Summary Section Test full name Result 3 Client Information - 4 Description of Equipment Under Evaluation and Variant Models - 5 System Setup and Method - 6 Power Density Calculation (FCC §1.1310) Compliant 7 Revision History - Intertek Report Number: 105000232BOX-001.1 Issued: April 13, 2022 Non-Specific Radio Report Shell Rev. December 2017 Page 5 of 10 Starry, Inc., Model: 24 GHz Titan Radio, Model Titan 24-360 3 Client Information This EUT was evaluated at the request of: Client: Starry, Inc. 38 Chauncy St, Suite 200 Boston, MA 02111 USA Contact: Robert White Telephone: (617) 297-9559 Email: [email protected] 4 Description of Equipment Under Test and Variant Models Manufacturer: Starry, Inc. 38 Chauncy St, Suite 200 Boston, MA 02111 USA Description of Equipment Under Test (provided by client) The equipment under test is a Multipoint Radio with integrated Bluetooth Low Energy (BLE) and 5 GHz transmitters. The BLE radio is used only during installation to add technicians for a very short period. The 24 GHz is active during that time and establishing a link / passing traffic. The BLE does not operate after installation is completed, except on site visit, which is rare. 5 GHz radio is always associated. It sends beacons 100% of the time on 5 GHz. It operates at the same time as the 24 GHz, and for a very short period of time with the BLE. Equipment Under Test Power Configuration Rated Voltage Rated Current Rated Frequency Number of Phases 48 VDC 5.84 A DC N/A Variant Models: The following variant models have been identified by the manufacturer as being electrically identical models, depop…

Text truncated - open the document above for the full version.

Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 1 of 6 Client: Starry, Inc. – Model: Titan 24-360 Setup Photographs: 9kHz – 30MHz 9kHz – 30MHz Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 2 of 6 Client: Starry, Inc. – Model: Titan 24-360 9kHz – 30MHz Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 3 of 6 Client: Starry, Inc. – Model: Titan 24-360 30 – 1000 MHz Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 4 of 6 Client: Starry, Inc. – Model: Titan 24-360 1 - 18 GHz Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 5 of 6 Client: Starry, Inc. – Model: Titan 24-360 18 – 40 GHz Intertek Report Number: 105000232BOX-001 Issued: 04/13/2022 Non-Specific Radio Report Shell Rev. August 2020 Page 6 of 6 Client: Starry, Inc. – Model: Titan 24-360 Above 40 GHz