2AHAS-36011324BT FM LED Transmitter

1.High-clarity LCD display (or Digital tube) 2.Audio playback with USB drive, TF, cell phone and other electronic devices 3.Supports music in MP3/WM A format 4. Hands-free phone call operations: Answer and hang up a call, dial a phone number. 5.Chrystal-clear stereo sound 6.Phone call echo elimination and noise cancellation technologies 7.Dual USB charging 8.Memory on frequency last used and music last played 9.Independent Bluetooth start/rotation switch button USER MANUAL Thank you very much for buying this product. You are advised to read this user manual carefully before using this product. We sincerely hope this product will bring you a lot of convenience and fun while you take a ride. We will be very honored if this product may make you satisfied with what it's designed for. lt will give us tremendous encouragement to work out with better products in the future if you may leave us a review on Amazon based on your unbiased user experience. This product is a multifunctional Car FM which plays music in MP3/WMA format and charge a variety of electronic devices. With embedded high-performance Bluetooth module and MP3/WMA decoding chip, Audio playback can be implemented wirelessly with USB drive, TF and other electronic devices through a car audio. Moreover, if a cell phone is connected with this product via Bluetooth, hands-free phone call operations during audio playback can be activated, as well as audio playback with cell phone through car audio. Witbout any modification on your car, you can now enjoy the music, charge a variety of electronic devices and deal with you phone calls with your hands free. Product characters 1. Bluetooth mode (1) Put this product into the cigarette lighter and synchronize its frequency with that of the car FM radio. Connect this product with a cell phone through Bluetooth. (2) Hands-free phone call operations activated: During audio playback, press a button once to answer an incoming call, press that button once again to hang up the call, press that button twice to call a phone number that you dialed last time. When there is an incoming call, the LCD display will show the telephone number and there is a voice prompt naming the caller's telephone number. (3)Through car audio you can hear audio playback from cell phone, TF, USB drive. (1) When a TF is inserted, audio playback from TF is activated. (2) When an USB drive inserted, audio playback from USB drive is activated. (3) When a cell phone or other electronic devices are linked to this product, audio playback from these devices starts. (4) The volume can be adjusted through both bthe buttons on car audio. Operating Instructions You can also hear telephone conversations from car auido, as well as the audio messages in cell phone's GPS car navigation applications. 2. Audio playback mode This product supports dual charging function to cell phone and other electronic devices. You can either charge a electronic device with playing the music in an USB drive, or you can charge 2 electronic devices simultaneously (Note that the charging current of the USB port with a flash mark is 2.1V while that of the USB port with a USB logo is 1A.) When this product is powered off, it remembers the frequency that is used and the music in cell phone. TF, USB drive and other electronic devices that is played before the it is turned down. When this product is initiated again, the frequency will be used and the music will be played. However, the first music will be played when you delete or change the memory (cell phone, memory in cell phone, TF, USB drive and other electronic devices) or when this product detect an error status. 3.Dual USB charging 4. Power-off memory Working voltage: 12V-24V The limits of working voltage:9V-26V USB output: 5V-3.lA max Music format: MP3 and WMA SNR > 60 DB Distortion < 0.1% Bluetooth voice processing: Supports A2Dp (advanced sound frequency distribution pattern) Bluetooth effective range:10M Cell phone microphone Bluetooth effective rang: 0.5M-2M Technical Parameters 1. This product will connect with cell phone through Bluetooth automatically unless you turn off Bluetooth on cell phone. 2. To adjust the volume of car audio use the button on it instead of adjusting the volume through this product. If you use this product to increase the volume of car audio, do not increase the volume to the higbest volume because that can cause distortion. 3. This product contains built-in antenna, so avoid switching to a FM frequency with very strong signal or an unoccupied FM frequency in order to get a better sound quality. 4. Some cell phones may not be automatically connected with this product through Bluetooth. If that happens, please manually connect cell phone with this product through Bluetooth. 5. When talking on cell phone. Do not raise your voice to an extent that may annoy the other party. 6. When talking on cell phone. the noise inside of the car may interfere with the sound quality. Slow down the car or pull over to resume the sound quality. 7 Do not use this product in a hot, dusty and wet environment. 8. Pull out this product from the cigarette lighter if it is not in use for a long time. Put this product into cigarette light after the car engine is started to avoid any possible damage of high voltage on this product. Appreciate again for your purchase on this product. We do hope the extraordinary features of this product can bring you a convenient and pleasant (or wonderful) ride. Attentions FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference t hat may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radia…

Text truncated - open the document above for the full version.

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: +1 732-339-9800 Fax: +1 732-481-0300 E-mail: [email protected] FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, Our product BT FM LED Transmitter, Model: WIABLK36011324, FCC ID: 2AHAS-36011324, for marketing purpose, this product only supports BDR (GFSK), EDR (π/4-DQPSK, 8DPSK) and FM(TX). The other functions were disabled to use by manufacture in the software, the end user has no capability to activate it. Sincerely Yours, Signature: Printed Name: Nathan Shamula Title: COO

CFR 47 §2.911(d)(5)(i) Attestation Letter JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: +1 732-339-9800 Fax: +1 732-481-0300 E-mail: [email protected] Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AHAS-36011324 JEM ACCESSORIES INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person: Nathan Shamula Title: COO

CFR 47 §2.911 (d)(5)(ii) Attestation Letter JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: +1 732-339-9800 Fax: +1 732-481-0300 E-mail: [email protected] Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AHAS-36011324 JEM ACCESSORIES INC. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. And our product does not use Kaspersky software information. Sincerely, Signature: Contact Person: Nathan Shamula Title: COO

U.S. AGENT LETTER OF ATTESTATION FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AHAS-36011324 JEM ACCESSORIES INC. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. is our designated U.S. agent for service of process for the above referenced FCC ID. JEM ACCESSORIES INC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 FRN: 0025209164 Tel.: +1 732-339-9800 Email: [email protected] Signed by (printed name): Nathan Shamula Signature:

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：+1 732-339-9800 Fax: +1 732-481-0300 E-mail：[email protected] FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, JEM ACCESSORIES INC. the undersigned, hereby authorize Bay Area Compliance Laboratories Corp. (Shenzhen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Shenzhen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Nathan Shamula Title: COO QA-FR-170-B

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel: +1 732-339-9800 Fax: +1 732-481-0300 E-mail: [email protected] FCC Confidential Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AHAS-36011324 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, JEM ACCESSORIES INC. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Printed Name: Nathan Shamula Title: COO

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 1 of 3 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 2 of 3 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 3 of 3

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 1 of 4 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 2 of 4 FM Antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501S19432E-RF Page 4 of 4 Bluetooth Antenna

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S19432E-RF-00A TR-EM-RF305 Page 10 of 29 Version 3.0 FCC 1.1307 (B) & §2.1091- MPE-BASED EXEMPTION Applicable Standard According to subpart 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. According to KDB 447498 D04 v01 Interim General RF Exposure Guidance MPE-Based Exemption: General frequency and separation-distance dependent MPE-based effective radiated power (ERP) thresholds are in Table B.1 [Table 1 of § 1.1307(b)(3)(i)(C)] to support an exemption from further evaluation from 300 kHz through 100 GHz. R is the minimum separation distance in meters f = frequency in MHz R is the minimum separation distance in meters f = frequency in MHz For multiple RF sources: Multiple RF sources are exempt if: in the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation: Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S19432E-RF-00A TR-EM-RF305 Page 11 of 29 Version 3.0 Result Mode Frequency (MHz) Tune up conducted power # (dBm) Antenna Gain # ERP Evaluation Distance (m) ERP Limit (W) (dBi) (dBd) (dBm)(W) BT 2402-2480 0.50 -3 -5.15 -4.65 0.00034277 0.2 0.768 Note: The tune up conducted power # and antenna gain # were declared and provided by the applicant. Mode Frequency (MHz) Maximum E-Field (dBuV/m@3m) Maximum EIRP (dBm) Tune up EIRP (dBm) ERP Evaluation Distance (m) ERP Limit (W) (dBm)(W) FM 88.1-107.9 57.82 -37.38 -37.00 -39.15 0.00000012 0.2 0.153 Note: The Tune up EIRP # was declared and provided by the applicant. EIRP = E-Field – 95.2 @3m, ERP=EIRP-2.15 Simultaneous transmitting consideration (worst case): The FM and BLE can transmit simultaneously, The ratio= ERP BT /limit+ ERP FM /limit= 0.00034277/0.768+0.00000012/0.153=0.000447<1.0 To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 20cm from nearby persons. Result: Compliant

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF305 Page 1 of 29 Version 3.0 TEST REPORT Applicant Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Report Number: 2501S19432E-RF-00A FCC ID: 2AHAS-36011324 Test Standard (s) FCC PART 15.239 Sample Description Product Type: BT FM LED Transmitter Model No.: WIABLK36011324 Multiple Model(s) No.: N/A Trade Mark: N/A Date Received: 2025/04/21 Issue Date: 2025/09/23 Test Result: Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Bruce Lin Michelle Zeng RF Engineer RF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S19432E-RF-00A TR-EM-RF305 Page 2 of 29 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 3 GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 SUPPORT CABLE DESCRIPTIONS ................................................................................................................................... 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC 1.1307 (B) & §2.1091- MPE-BASED EXEMPTION ........................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 RESULT ...................................................................................................................................................................... 11 FCC§15.203 - ANTENNA REQUIREMENT ............................................................................................................ 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC§15.209 & §15.239(B) - RADIATED EMISSIONS ........................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 LIMIT ......................................................................................................................................................................... 13 EUT SETUP ................................................................................................................................................................ 13 EMI TEST RECEIVER & …

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S19432E-RFA Page 1 of 2 EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (9 kHz- 30 MHz) Radiated Emissions View (30 MHz-1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S19432E-RFA Page 2 of 2 Radiated Emissions View (Above 1 GHz)