2AHAS-EIX11004Smart indoor fixed camera

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] Date: 2023-08-31 Attestation letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The RF chip, model RTL8188FTV, which installed in our product Smart indoor fixed camera, FCC ID: 2AHAS-EIX11004, model: EIX1-1004, EIX1-1004-WHT, EIX1-1004- BLK, supports 2.4G Wi-Fi, for use in America, this chip only supports 2.4G Wi-Fi (2412- 2462MHz/2422-2452MHz). The other bands was disabled to use by manufacture in the software, the end user has no capability to activate it. Sincerely, Signature Printed Name: Eli Dabbah Title: Manager

CFR 47 §2.911(d)(5)(i) Attestation Letter SHENZHEN SHENGLAI TECHNOLOGY CO.,LIMITED Add: ROOM 3110,BLOCK C,XINTIAN CENTURY BUSINESS CENTRE, FUMING ROAD,FUTIAN DISTRICT, SHENZHEN, CHINA Tel: +86-755-82324457 Fax:+86-755-82324457 E-mail：[email protected] Attestation Letter Date: 2023/8/31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AHAS-EIX11004 JEM ACCESSORIES INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person: Eli Dabbah Title: Manager Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected]

CFR 47 §2.911 (d)(5)(ii) Attestation Letter JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] Attestation Letter Date: 2023/8/31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AHAS-EIX11004 JEM ACCESSORIES INC. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Contact Person: Eli Dabbah Title: Manager Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817

U.S. AGENT LETTER OF ATTESTATION Date: 2023-08-31 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AHAS-EIX11004 JEM ACCE SSORIES INC. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. is our designated U.S. agent for service of process for the above referenced FCC ID. JEM ACCESSORIES INC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: JEM ACCESSORIES INC. Address: 32 Bruns wick Avenue, Edison, New Jersey, United States, 08817 FRN: 0025209164 Tel.: 908-222-7501 Email: [email protected] Signed by ( printed name): Eli Dabbah Signature:

FCC Authorization 2023/8/31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, JEM ACCESSORIES INC. the undersigned, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Eli Dabbah Title: Manager QA-FR-170-B JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected]

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023/8/31 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC., hereby declare that we have a product named as Smart indoor fixed camera, (Model No.:EIX1-1004, FCC ID: 2AHAS-EIX11004) was tested by China Certification ICT Co., Ltd (Dongguan), meanwhile, for our marketing purpose, we would like to list a series model No.: EIX1- 1004-WHT, EIX1-1004-BLK on reports and certificate, all the models are identical in electrically, the difference among them is model name and color. And no other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Printed Name: Eli Dabbah Title: Manager

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-EXP Page 1 of 5 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-EXP Page 2 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-EXP Page 3 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-EXP Page 4 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-EXP Page 5 of 5

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 1 of 6 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 2 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 3 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 4 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 5 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-INP Page 6 of 6 ANT

Circuit Description The Smart indoor fixed camera’s MCU use AK3918EV330L. 24MHz crystal is used for AK3918EV330L chip. The AK3918EV330L is designed specifically for cost sensitive, low-power, and high-performance HDIP camera applications to meet the increasing demand for high-definition video surveillance. With embedded DDR2, H.264 hardware encoder, ISP, AES/DES/3DES encryption, AK3918EV330L can easily achieve high performance. The camera currently operates on the Wi-Fi frequency, which is based on realtek RTL8188FTV chipset that complied with IEEE 802.11g, 802.11b, 802.11n standard. 40MHz crystal is used for RTL8188FTV chip. Frequency Range: 2412-2462 MHz(802.11b/g/n ht20) 2422-2452 MHz(802.11n ht40) Modulation Type: DSSS, OFDM Rated Input Voltage: DC 5V from adapter

No. Sub-item material code Material nameUnit Actual quantity Tag number 12.01.03.00134PCBA;Motherboard;AK3918EV330L+SC2336;ZK-SC10029-W37_V1.0.0;2MPPcs1 21.10.01.00332Resistor;SMD;4.7K;±5%;0402;1/16W;Thick sound;Pcs4R7,R9,R10,R13 31.10.01.00771Resistor;SMD;200K;±1%;0402;1/16W;50V;Pcs2R4,R11 41.10.01.00227Resistor;SMD;1K;±5%;0402;1/16W;Thick sound;Pcs2R3,R45 51.10.01.00268Resistor;SMD;10K;±5%;0402;1/16W;Thick sound;Pcs4R16,R20,R30,R54 61.10.01.00007Resistor;SMD;300K;±1%;0402;1/16W;Pcs1R2 71.10.01.00206Resistor;SMD;0R;±5%;0402;1/16W;Pcs5R1,R5,R14,R28,R34 81.10.01.00776Resistor;SMD;44.2K;±1%;0402;1/16W;Pcs1R12 91.10.01.00343Resistor;SMD;2.2K;±5%;0402;1/16W;Thick sound;Pcs2R17,R47 101.10.01.00211Resistor;SMD;120K;±1%;0402;1/16W;Thick sound;Pcs1R6 111.10.01.00002Resistor;SMD;0.3R;±1%;0603;1/10W;Pcs1R39 121.10.01.00347Resistor;SMD;33.2K;±1%;0402;1/16W;Thick sound;Pcs2R49,R51 131.10.01.00787Resistor;SMD;6.8K;±5%;0402;1/16W;Pcs1R44 141.10.01.00003Resistor;SMD;110K;±1%;0402;1/16W;50V;Pcs1R8 151.10.02.00035Capacitor;SMD;NP0;27PF;±5%;50V;0402;Pcs2C59,C60 161.10.02.00433Capacitor;SMD;X5R;1UF;±10%;6.3V;0402;Pcs1C14 171.10.02.00254Capacitor;SMD;X5R;0.1UF;±10%;16V;0402;Pcs30 C5,C17,C29,C30,C33,C35,C40,C41,C42, C46,C48,C49,C50,C56,C58,C61,C66,C7 2,C75,C77,C78,C84,C100,C102,C105,C 107,C109,C111,C113,C117 181.10.02.00434Capacitor;SMD;X5R;2.2UF;±20%;6.3V;0402;Pcs5C7,C8,C13,C19,C20 191.00.00.00044Capacitor;SMD;X5R;4.7UF;±20%;6.3V;0402;Fenghua,HuaxinkePcs32 C1,C4,C9,C12,C22,C25,C28,C36,C43,C 52,C53,C65,C68,C70,C73,C74,C82,C10 3,C110,C112,C116,C15,C57,C99,C101, C104,C106,C108，C3，C6，C32，C37 201.10.08.00597 Crystal;SMD;24MHz;±10PPM;12PF;40R;-30°C&85°C;±10PPM;SMD3225; Pcs1Y1 211.10.06.00249Power inductor;SMD;2.2UH;±20%;0.11R;1.2A;0806;Pcs4L1,L2,L3,L4 221.10.06.00004Inductor;SMD;3NH;LQG15HS3N0S02D;0402;Pcs1R67 231.10.11.00386Tact switch;SMD;4.5*4.5*3.8MM;Pcs1SW1 241.10.05.00331TF card holder; external welding type; spacing 1.1MM; copper alloy;Pcs1CN2 251.00.00.00076Power chip-LDO voltage regulator;LDO;TPL730F28-5TR;2.4~5.5;2.8V;300MA;SOT23-5;SMD;Pcs1U11 261.10.09.00038 Chip; SMD; audio and video conversion; power amplifier IC; 8Ω/4Ω; 1.47W/2.5W; DFN-8L- 2x2MM; CS8126T; Zhipu Xinwei; Pcs1U5 271.10.09.00955Chip;SMD;SOC;IPCAMERA;ARM926EJ-S;QFN80;AK3918EV330L;Ankai;Pcs1U8 281.10.09.00183Power IC;SMD;Current regulator;DCDC;LN2401;2.5&6V;0.8A;1.4MHZ;SOT23-5;Nanlin;Pcs1U9 291.10.09.00328Chip;SMD;Sensor;CMOS;1/3"35PIN;CSP_SC2336-CSBNN00Pcs1U12 301.10.05.00601Needle seat; 2PIN; 1.25MM spacing; horizontal sticker; tape packaging;Pcs1CN5 311.00.00.00051Connector-Male-2Pin-1.25mm pitch-vertical stickerPcs2CN4,CN9 321.00.00.00050Connector-Male-5pin-1.25mm pitch-vertical stickerPcs1CN3 331.10.09.00022 IC;SMD;FLASH;64MB;2.7V-3.6V;-40°C_+85°C;SOP8(208MIL);GD25Q64ESIG;tube mounting; Pcs1U7 341.00.10.00012Antenna;ceramic patch;W37ZA3;WIFI;2.4G;11.6*5.3*3.0MM;SLK-ZKXC-P1105A;YSB;Pcs1ANT1 351.10.09.00389Power IC; SMD; Voltage regulator; LDO; LN5052B182MR-G; 2.8V&7V; 1.8V; 500MA; SOT23-5;Pcs1U2 361.00.00.00077Driver chip; motor driver; 2.9V~17V; SOT23-6; SMD; TPM16050Pcs1U13 371.00.00.00071Power chip-voltage converter;DCDC;ETA3485S2F;2.6V-7V;1A;2M;SOT23-5L;SMD;BUCKPcs3U1,U3,U6 381.00.00.00079TY001 WIFI module Realtek RTL8188FTV IPC dedicated without IPEX headerPcs1U14 391.10.05.00033USB female socket; TYPE-C; 6P-VT-SMT-L6.5; vertical; carrier tape packaging;1CN6 401.00.00.00086Protective film; IPC sensor and filter high temperature protective film; 5.5 silk PET; 8.5*8.5MMPcs1Posted on U12 411.10.13.00098 PCB substrate;ZK-SC10029-W37_V1.0.0;φ53*1.6MM;4L;OSP;black matte/white;no half hole;with halogen; Pcs1PCB substrate

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-00 Page 67 of 69 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.1.2 Measurement Result Operation Modes Frequency (MHz) λ/2π (mm) Distance (mm) Exemption ERPMaximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP (dBm) MPE- Based Exemption (mW)(dBm) Wi-Fi 2412-2462 19.80 200 768 28.85 15.5 3.47 16.82 Compliant Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: The device compliant the MPE-Based Exemption at 20cm distances.

5 5 4 4 3 3 2 2 1 DD CC BB AA 5.0V 1.5V 5.0VVDDC 5.0V3.3V 3.3V 1.8V_DOVDD 3.3V 2.8V_AVDD 3.3V 1.2V_DVDD U4 LN5052B182MR_G_SOT23_5P NC Vin 1 GND 2 CE 3 NC 4 Vout 5 C1 C C7 C R12 R C8 C C20 C C6 C NC R2 R C12 C R6 R C25 C C16 C NC L1L U3 SY8088I_SOT23_5P EN 1 G N D 2 LX 3 VIN 4 FB 5 C22 C C4 C R11 R U1 SY8088I_SOT23_5P EN 1 G N D 2 LX 3 VIN 4 FB 5 R4 R C18 C NC U6 SY8088I_SOT23_5P EN 1 G N D 2 LX 3 VIN 4 FB 5 C9 C L3L U11 TPL730F28_5TR_SOT23_5P VIN 1 G N D 2 EN 3 NC/FB 4 OUT 5 C3 C NC C19 C U2 LN5052B182MR_G_SOT23_5P Vin 1 GND 2 CE 3 NC 4 Vout 5 R8 R L2L 5 5 4 4 3 3 2 2 1 1 DD CC BB AA 3.3V VDDC 1.5V VDDC 3.3V3.3V 1.8V_DOVDD 3.3V 3.3V VDDC1.5V3.3V 1.5V VREF_DDR VREF_DDR VCM2 VCM3 VCM3VCM2 USB_DM8 USB_DP8 CIS_SCL7 CIS_SDA7 IR_CUT+7 IR_CUT-7 CIS_RESET7 CIS_PWDN7 CIS_D0-7 CIS_D0+7 CIS_D1-7 CIS_D1+7 CIS_CLK-7 CIS_CLK+7 CIS_MCLK7 SD_D05 SD_CLK5 SD_CMD5 SD_CD5 AC_LINE_OUT5 AC_AMIC_IN5 FACTORY_RST6 SPK_EN5 LED_GREEN5 LED_RED5 IR_LED_EN5 TP22TP C28 C C57 C C48 C C49 C C53 C C36 C R28R POWER System USB UART I2C Camera GPIO MMC/SD/SPI MAC ADC/DAC GND AK3918EV330L_QFN81P U8 V D D 1 9 V D D 2 2 6 V D D 3 4 9 V D D 4 6 9 A V D D 1 1 _ P L L 5 0 V D D 1 5 _ D D R 2 6 6 V D D 1 5 _ D D R 2 6 7 V D D 1 5 _ D D R 2 6 8 V D D 1 5 _ D D R 2 7 0 V D D 1 5 _ D D R 2 7 1 V D D 1 5 _ D D R 2 7 3 V D D 1 5 _ D D R 2 7 4 V D D 1 5 _ D D R 2 7 5 V D D I O 1 0 V D D I O _ O S C 6 2 A V C C 3 3 5 1 H P V D D 5 4 V B A T 6 1 V D D I O _ C I S 0 3 0 A V C C 3 3 _ M I P I 4 5 A V C C 1 1 _ M I P I 4 8 VREF/VCM2 56 AVCC/VCM3 57 VREF_DDR2 72 AIN0 60 HPOUT 55 MICP/GPI83 58 LINEIN/GPI84 59 GPIO10_PD/RMII_MDC/I2S_MCLK/PWM2 79 GPIO11_PU/RMII_MDIO/I2S_LRCLK/SPI1_CS 80 GPIO13_PD/RMII_TXEN/I2S_BCLK/SPI1_SCLK 1 GPIO14_PD/RMII_TXD0/I2S_DI/SPI1_DI 2 GPIO15_PD/RMII_TXD1/I2S_DO/SPI1_DO 3 GPIO19_PD/RMII_RXD0/SD1_D3/SPI1_HOLD 4 GPIO20_PD/RMII_RXD1/SD1_D2/SPI1_WP 5 GPIO23_PD/RMII_RXER/SD1_D1/PWM3 6 GPIO24_PD/RMII_RXDV/SD1_D0/PWM4 7 GPIO47_PD/OPCLK_25M_50M/PWM4 8 GPIO42_PU/SD1_CLK 11 GPIO41_PU/SD1_CMD 12 GPIO36_PU/SD0_D3/SPI0_DO 15 GPIO26_PU/SPI0_SCLK 16 GPIO35_PU/SD0_D2/SPI0_DI 19 GPIO79_PU/SPI0_HOLD 17 GPIO25_PU/SPI0_CS 18 GPIO34_PU/SD0_D1/SPI0_WP 20 GPIO33_PU/SD0_D0 21 GPIO32_PU/SD0_CLK 22 GPIO31_PU/SD0_CMD 23 8 1 GNDPAD XCLK24M_XI 63 XCLK24M_XO 64 RESET_N 78 USB_DM 52 USB_DP 53 GPIO1_PU/UART0_RXD 13 GPIO2_PU/UART0_TXD 14 GPIO27_PU/TWI0_SCL 27 GPIO28_PU/TWI0_SDA 28 GPIO49_PD 29 CIS0_SCLK/GPIO64_PD/JTAG_TDOOUT 31 CIS0_PCLK/GPIO65_PD 32 CIS0_HSYNC/GPIO66_PD/PWM3 33 CIS0_VSYNC/GPIO67_PD/PWM4 34 CIS0_D0/GPIO6_PD/UART1_RXD 35 CIS0_D1/GPIO7_PD/UART1_TXD 36 CIS0_D2/GPIO8_PD/UART1_CTS 37 CIS0_D3/GPIO9_PD/UART1_RTS 38 CIS0_D4/GPIO68_PD/PWM0 39 CIS0_D5/GPIO69_PD/PWM1 40 CIS0_D6/GPI75_PU/MIPI_DN1 41 CIS0_D7/GPI74_PU/MIPI_DP1 42 CIS0_D8/GPI71_PU/JTAG_TMS/MIPI_CLKN 43 CIS0_D9/GPI70_PU/JTAG_TCK/MIPI_CLKP 44 CIS0_D10/GPI72_PU/JTAG_TDI/MIPI_DP0 46 CIS0_D11/GPI73_PU/MIPI_DN0 47 GPIO80_PU/PWM0/SD0_D2/TWI1_SCL 24 GPIO81_PU/PWM2/SD0_D3/TWI1_SDA 25 GPIO82_PU 65 GPIO5_PU/PWM2/UART1_TXD/JTAG_RTCK/AIN1/TWI2_SCK 76 GPIO0_PU/JTAG_RSTN/UART1_RXD/TWI2_SDA 77 R20 R TP23TP C29 C C43 C C39 C NC C5C C37 C NC R17R TP24TP U7 GD25Q128CSIG_SOP8P CS 1 SO/SIO1 2 WP/SIO2 3 GND 4 SI/SIO0 5 SCLK 6 RESET/SIO3 7 VCC 8 C52 C C30 C R34R C44 C NC C63 C NC C40 C C38 C NC R1R C31 C NC C61C C45 C NC C58 C C41 C Y1 XTAL_ 21 43 C50 C C35 C R30 R C64 C NC C46 C C59 C C32 C NC C42 C C62 C NC C56 C C33 C C60 C R16 R SPI_CLKSPI_CLK XTLO DEBUG_RX DEBUG_TX XTLI XTLO SPI_CSN SPI_MISO SPI_WP SPI_HOLD DEBUG_TX SPI_MOSI SPI_CLK XTLI DEBUG_RX CIS_MCLK SD_CLK SPI_MISO SPI_HOLD SPI_CSN SPI_WP SPI_MOSI RESET 24MHz 5 5 4 4 3 3 2 2 1 1 DD CC BB AA 3.3V 5.0V 5.0V VCM3 3.3V 3.3V 5.0V SD_D04 SD_CMD4 SD_CLK4 SD_CD4 SPK_EN4 AC_LINE_OUT4 IR_LED_EN4 AC_AMIC_IN4 LED_RED4 LED_GREEN4 TP13 TP CN4 CN_1X2_4P S 2 S 2 S 1 S 1 2 2 1 1 CN2 TFCARD_COMMON_13P DAT2 1 CD/DAT3 2 CMD 3 VDD 4 CLX 5 VSS6 6 DAT0 7 DAT1 8 CD 9 CGND12 12 CGND13 13 CGND10 10 CGND11 11 U5 CS8126T_DFN9 SHUTDOWN 1 NC 2 +IN 3 -IN 4 Vo+ 5 VDD 6 G N D 7 Vo- 8 E P A D 9 C75 C C65 C C77C C66 C TP9TP C78C C70 C TP10TP R45R TP1TP U10 CS8302M_SOP8P NC SD 1 NC 2 IN+ 3 IN- 4 VO- 8 VO+ 5 GND 7 VDD 6 TP7TP CN5 CN_1X2_4P S 2 S 2 S 1 S 1 2 2 1 1 C72 C R47R TP12 TP C68 C C74 C C73 C R49R TP2 TP TP8TP R44R U9 LN2401_SOT23_5P VIN 4 CE 1 LX 3 FB 5 G N D 2 R39 R R51R CN3 CN_1X5_7P S 2 S 2 5 5 4 4 3 3 2 2 1 1 S 1 S 1 TP11 TP L4L IR_LED- IR_LED+ IR_LED- IN+ IN- SPK+ SPK- IR_LED+ SPK_EN SPK+ SPK- IN+ IN- 5 5 4 4 3 3 2 2 1 1 DD CC BB AA FOOTPRINT FROM SC-11315-TYPEC_V1.0.0.DSN(USB1) 5.0V 3.3V VIN FACTORY_RST4 C2 C NC R5R C84 C R3R C82 C TP3 TP U15 LP5300FB6F_SOT23_6P NC NC 6 GND1 2 VIN 3 VOUT 4 GND0 1 GND2 5 CN6 TYPEC6P-TC02-06F GND B12 VBUS B9 CC1 A5 CC2 B5 VBUS A9 GND A12 G N D F P 1 G N D F P 2 R54 R TP18TP TP19TP SW1 4p5x4p5 SOTFL4-L4P5XW7P5-3P0-H3P8 1 1 2 2 4 4 3 3 5 5 4 4 3 3 2 2 1 1 DD CC BB AA 1.8V_DOVDD 2.8V_AVDD 1.2V_DVDD 5.0V 1.8V_DOVDD 1.8V_DOVDD 1.2V_DVDD 2.8V_AVDD 1.8V_DOVDD CIS_CLK+4 CIS_CLK-4 CIS_D1+4 CIS_D1-4 CIS_D0+4 CIS_D0-4 IR_CUT+4 IR_CUT-4 CIS_PWDN4 CIS_SCL4 CIS_MCLK4 CIS_SDA4 CIS_RESET4 TP16TP C108 C C102 C C11 C NC R10 R C15 C C10C NC C109 C C17 C R14R NC R13 R C112 C C104 C C113 C CN9 CN_1X2_4P S 2 S 2 S 1 S 1 2 2 1 1 C14 C C106 C C99 C C110 C R7 R C105 C U12 SC2336_BGA35P EXTCLK A3 SDA A4 SCL A5 XSHUTDN A6 PWDNB C6 EFSYNC A7 SID B5 LREF A2 DOVDD1 C2 NC E7 VREFN D7 PCLK/MCN D4 D4/MD1P D3 D3/MD1N D2 D8/MD0P E5 D7/MD0N D5 FSYNC B3 D9 C5 D1 D1 D0 E1 D2 E2 D5 E3 NC1 E6 A G N D A 1 A G N D 1 C 7 D O G N D B 2 D O G N D 1 D 6 A V D D 2 B 7 A V D D 1 B 1 D V D D 1 B 4 D O V D D 2 C 3 D V D D 2 B 6 D V D D C 1 D6/MCP C4 D V D D 3 E 4 U13 AN_SY6712_SOT23_6P OUT2 1 GND 2 OUT1 3 IN1 5 VCC 4 IN2 6 C101 C C111 C TP15TP C13 C C107 C R9 R C103 C C100 C IR_CUT_OUT- IR_CUT_OUT+ IR_CUT_OUT+ IR_CUT_OUT- CIS_RESET CIS_PWDN CIS_SCL CIS_SDA 5 5 4 4 3 3 2 2 1 1 DD CC BB AA 3.3V USB_DM4 USB_DP4 HOLE5 HOLE C118 C NC HOLE6 HOLE C119 C NC R67R U14 WIFI_TY001 VDD3.3V 1 UDM 2 UDP 3 GND 4 GND1 5 ANT 6 HOLE2 HOLE C116 C HOLE3 HOLE C117 C R F G N D ANT1 ANT_UB01NP3D75A_2P 1 2 1…

Text truncated - open the document above for the full version.

东莞地址东莞市塘厦镇林村社区新太阳业城栋 1 承认书 SPECIFICATIONFORAPPROVAL 客户名称 CUSTOMERNAME: 产品名称 PRODUCTNAME:2.4G 客户料号 CUSTOMERP/N: 优比电子料号 UBP/N:REV:A MANUFACTURER SIGNATURE CUSTOMER SIGNATURE CHECKEDBY: Mark.liang APPROVEDBY:Changxing.Liu DATE:2020/12/11 Ceramic patch antenna 0769-81777126 0769-81777126 www.ubuant.com Tangxia Town, Dongguan City, Lincun community, new Sun Industrial City 79 Tangxia Town, Dongguan City, Lincun community, new Sun Industrial City 79 Tangxia Town, Dongguan City, Lincun community, new Sun Industrial City 79 Tangxia Town, Dongguan City, Lincun community, new Sun Industrial City 79 Tangxia Town, Dongguan City, Lincun community, new Sun Industrial City 79 2 变更覆历Changecalendar 版本Version修改内容ContentRevised创建者Modifier时间Date AOriginalversionMark.Liang2020-12-11 3 Contents ltemDescription 1.-------------------------------------------------------------------ElectricalSpecification 2.---------------------------------------------------------------Testitemsandequipment 3.----------------------------------------------------------------------------------------VSWR 3.------------------------------------------------------------------ReturnLossandVSWR 4.-------------------------------------------------------EfficiencyandPeakGainValue 5.-------------------------------------------------------------------------RadiationPattern 6.------------------------------------------------------------------------------Activetestdata 7.--------------------------------------------------------------Antennamatchingnetwork 8.----------------------------------------------------------------- AntennaPhoto 4 1.ElectricalSpecification: 2.Testitemsandequipment CharacteristicsSpecificationsUnit OutlineDimensions10.4x5.4x3.0 mm WorkingFrequency2400~2500MHz InputImpedance50Ω VSWR2.0Max PolarizationLinearPolarization Gain3.47 dBi Efficiency≥40 % ConnectorTypeOpen Operatingtemperature -20 °C ~+70 °C StorageTemp -20 °C ~+50 °C TestitemsTestequipment Parameter 1.ReturnLoss 2.VSWR Networkanalyzer (AgilentE5071B) Passiveparameters ofthewholemachine 1.Frequency 2.Gain 3.Radiation Pattern 1.3Dmicrowavedarkroom (5m*5m*4m) 2.Networkanalyzer (AgilentE5071B) Activeparameters ofthewholemachine 1.TRP 2.TIS 1.3Dmicrowavedarkroom (5m*5m*4m) 2.Comprehensivetestinstrument (CMW500) 5 3.ReturnLossandVSWR *VoltageStandingWaveRatio(VSWR) ReturnLoss(RL) RL=20*log10[(VSWR+1)/(VSWR-1) 4.EfficiencyandGainValue Frequency (MHz) 240024502500 Efficiency (%) 56.152.0252.82 PeakGain (dB) 2.932.743.47 Frequency (MHz) ReturnLoss VSWR 2400-16.1181.37 2450-15.9371.37 2500-12.9021.58 6 5.RadiationPattern 5-1Antenan3DRadiationPattern 2400MHz 2450MHz 2500MHz 7 5-2Antenan2DRadiationPattern Phi02D Phi902D Theta902D Vertical Plane Horizontal Plane 8 6.Activetestdata: Antennacompletemachinetest 7.AntennaMatchingNetwork ElementValue E10.5PF E23.9NH E3N/A *Matchtheelectroniccomponentsaccordingtotheabovetoachievethereported antennaperformance 8.AntennaPhoto

TEST REPORT Applicant: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 FCC ID: 2AHAS-EIX11004 Product Name: Smart indoor fixed camera Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230848227-00 Date Of Issue: 2023/9/6 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-00 Page 2 of 69 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-00 Page 3 of 69 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.1 EUT Operation Condition: ............................................................................................................................. 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 9 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 3.2.1 Applicable Standard ..................................................................................................................................... 15 3.2.2 EUT Setup.................................................................................................................................................... 15 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 16 3.2.4 Test Procedure ............................................................................................................................................. 16 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 MINIMUM 6 DB EMISSION BANDWIDTH .......................................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-00-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230848227-00-TSP Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View