2AHAS-PWC810383-1 desktop charging station BLK

Applicant Declaration QSF27-14-04Rev 1.1Jan17, 2024Page1of2Original Issue: Jan. 4,2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States ApplicantLegal Business Name JEM ACCESSORIES INC. Address 32 Brunswick Avenue Edison New Jersey 08817 United States FRN 0025209164 Grantee Code 2AHAS FCC ID 2AHAS-PWC81038 Authorized Contact Name Nathan Shamula Contact Email [email protected] Contact Phone 7323399800 I, the undersigned,certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best ofmy knowledge and belief. b)in accepting a Grant of Equipment Authorization issued byaTCB, under the authority of the FCC, as a result of the representations made in this application, theApplicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)iftheApplicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909and KDB394321, theApplicant has read, understood and agrees to acceptthat they are the responsible partyandagree toabide by theirresponsibilities as specified under 47 CFR 2.909and KDB394321. e)in accordance with ISO17065, FCC KDB641163,FCC KDB610077, KDB394321and RSP-100, theApplicanthas read, understood, accepts andagreesto abide by thepost marketsurveillance requirements. (1)the Applicant understands,accepts and agrees that a samplemay be requested for surveillance testing. (2)theApplicantshallmake provisions to always have a production sample available upon request by SGS, FCCand/or ISED. (3)theApplicantshall, upon request by SGS, at theApplicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISEDas instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither theApplicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant toSection 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)theApplicant hasread, understood, acceptsand agreestoabide bythe SGS North America, Inc.(TCB) terms and conditions. Link to CFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List:Covered List [JEM ACCESSORIES INC.](“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [JEM ACCESSORIES INC.](“the applicant”) certifies that, as of the date of the filing of the application, the applicant[is not]identified on the Covered list, established pursuant to§1.50002, as an entity producing “covered” equipment. ApplicantSignature: Date:2024-08-14 Print Name: NathanShamula Title: Manager *NOTE:This declaration cannot be signed by an Agent,itshallbe signed byanauthorized person listed in the FCC database Applicant Declaration QSF27-14-04Rev 1.1Jan17, 2024Page2of2Original Issue: Jan. 4,2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States

UNITEDSTATESDESIGNATED AGENT LETTER Date:2024-08-14 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 ApplicantU.S. designated agent Company Name:JEM ACCESSORIES INC.Company Name:JEM ACCESSORIES INC. FRN Grantee Code: 0025209164 2AHASFRN 0025209164 Contact Name:Nathan ShamulaContact Name:Nathan Shamula Address:32 Brunswick Avenue Edison New Jersey 08817 United States Address:32 Brunswick Avenue Edison New Jersey 08817 United States City/Province/Zip:City/Province/Zip: Telephone:(732) 339-9800Telephone:(732) 339-9800 Fax:(732) 481-0300Fax:(732) 481-0300 Email:[email protected]:[email protected] Applicable Equipment:FCC ID:2AHAS-PWC81038 ATTN: Director of Certification: We,JEM ACCESSORIES INC.understand and acknowledge the applicants consent andthe designated agent’s obligation to accept service of processin the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We,JEM ACCESSORIES INC.acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. ApplicantU.S. designated agent Name(Printed):Nathan ShamulaName(Printed):Nathan Shamula Title:ManagerTitle:Manager Signature:Signature:

JEM ACCESSORIES INC. Date:2024-08-14 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:FCC ID:2AHAS-PWC81038 To whom it may concern: We, the undersigned, herebyauthorizeSGS-CSTC Standards Technical Services Co., Ltd.(SGS) Shenzhen Branchto act on our behalf in all manners relating to application for equipment authorizationwith respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out bythe agent onour behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with JEM ACCESSORIES INC. This authorization is valid until further written notice from the applicant. PrintName:NathanShamulaTitle:Manager Signature: On behalf of Company:JEM ACCESSORIES INC. Telephone:7323399800 E-mail:[email protected]

JEM ACCESSORIES INC. TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:Confidentiality Request regarding application for FCC ID:2AHAS-PWC81038 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of thecommission’srules, the applicantherebyrequest confidential treatment of the documents listed below,associatedwith the certification application referenced above. Schematic(s) Block Diagrams OperationalDescriptions The documents above contain proprietary information notreleased to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY（Remark：如下资料需要短期保密请选择天数0，45,90或者180天，短期保密期间产品不能在美国市场上售卖。 Additionally, theapplicant requests the following documents be held confidentialuntil the device is marketed or 0 days from the grant date, whichever is less.If the device is marketed within0days of the Grant Date, the applicant will notify the TCBper FCC KDB726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name:NathanShamulaTitle:Manager Signature: On behalf of Company:JEM ACCESSORIES INC. Telephone:7323399800 E-mail:[email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2408003073AT FCC ID: 2AHAS-PWC81038 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 7 Internal Photos for SZCR2408003073AT FCC ID: 2AHAS-PWC81038 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307303 Page: 1 of 12 Keny Xu EMC Laboratory Manager 1 COVER PAGE Human Exposure Report Application No.: SZCR2408003073AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue Edison New Jersey 08817 United States Manufacturer: JEM ACCESSORIES INC. Address of Manufacturer: 32 Brunswick Avenue Edison New Jersey 08817 United States Factory: Shenzhen Tilv Technology Co., Ltd Address of Factory: 3/F Dongshan No.8 factory, Difu Rd., Gushu Community, Xixiang St., Baoan District, Shenzhen, China. Equipment Under Test (EUT): EUT Name: 3-1 desktop charging station BLK Model No.: PWC8-1038-BLK FCC ID: 2AHAS-PWC81038 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 Date of Receipt: 2024-08-07 Date of Test: 2024-08-09 to 2024-08-30 Date of Issue: 2024-09-04 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307303 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2024-09-04 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307303 Page: 3 of 12 2 Contents 1 COVER PAGE ............................................................................................................................................ 1 2 CONTENTS ................................................................................................................................................ 3 3 GENERAL INFORMATION ........................................................................................................................ 4 3.1 DETAILS OF E.U.T. ................................................................................................................................... 4 3.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 4 3.3 TEST LOCATION ........................................................................................................................................ 5 3.4 TEST FACILITY .......................................................................................................................................... 5 3.5 DEVIATION FROM STANDARDS ................................................................................................................... 6 3.6 ABNORMALITIES FROM STANDARD CONDITIONS .......................................................................................... 6 4 EQUIPMENTS USED DURING TEST........................................................................................................ 6 5 TEST MODE DESCRIPTION ..................................................................................................................... 6 6 TEST BLOCK DIAGRAM ........................................................................................................................... 8 7 TEST RESULTS ......................................................................................................................................... 9 7.1 RF EXPOSURE TEST ................................................................................................................................. 9 7.1.1 E.U.T. Operation ............................................................................................................................ 9 8 TEST SETUP PHOTOS ........................................................................................................................... 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307303 Page: 4 of 12 3 General Information 3.1 Details of E.U.T. Power supply: Input: DC 5V/3A, 9V/3A Output 1 - Phone: 5/7.5W/10W Output 2 - TWS: 5W Output 3 - Watch: 2.5W Cable(s): Type-C cable: 100cm unshielded Operation frequency: Output 1 - Phone: 111.0kHz to 162.8kHz Output 2 - TWS: 127.79kHz to 130.11kHz Output 3 - Watch: 322.844kHz to 323.668kHz & 1.62322MHz to 1.62584MHz Modulation type: Load modulation Antenna type: Loop Antenna Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter XIAOMI MDY-12-ES REF. No.SEA05N03F Earphone Apple A2566 REF. No.SEA10D00 Watch Apple Series 5 REF. No.SEA32A00 Watch Apple A2474 REF. No.SEA32A01 iPhone 8 Apple A1863 REF. No.SEA16J00 Mobile Phone Nexus MRA58K REF. No.SEA16P00 Mobile Phone Redmi 22XR03314 REF. No.SEA16P01 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307303 Page: 5 of 12 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have be…

Text truncated - open the document above for the full version.

Justification statement for Antenna To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AHAS-PWC81038 Dear Sir/Madam, Only radiated measurements are used for EUT with FCC ID: 2AHAS-PWC81038 to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The detailed information for antenna as below shows: For output 1 coil: Design Specifications Typical Antenna Type Loop Antenna Working Frequency Output 1 - Phone: 111.0kHz to 162.8kHz Overall Dimensions 41.0mm*21.0mm For output 2 coil: Design Specifications Typical Antenna Type Loop Antenna Working Frequency Output 2 - TWS: 127.79kHz to 130.11kHz Overall Dimensions 41.0mm*21.0mm For output 3 coil: Design Specifications Typical Antenna Type Loop Antenna Working Frequency Output 3 - Watch: 322.844kHz to 323.668kHz & 1.62322MHz to 1.62584MHz Overall Dimensions 26.0mm*15.5mm

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307302 Page: 1 of 37 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2408003073AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue Edison New Jersey 08817 United States Manufacturer: JEM ACCESSORIES INC. Address of Manufacturer: 32 Brunswick Avenue Edison New Jersey 08817 United States Factory: Shenzhen Tilv Technology Co., Ltd Address of Factory: 3/F Dongshan No.8 factory, Difu Rd., Gushu Community, Xixiang St., Baoan District, Shenzhen, China. Equipment Under Test (EUT): EUT Name: 3-1 desktop charging station BLK Model No.: PWC8-1038-BLK FCC ID: 2AHAS-PWC81038 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2024-08-07 Date of Test: 2024-08-09 to 2024-08-30 Date of Issue: 2024-09-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307302 Page: 2 of 37 Revision Record Version Chapter Date Modifier Remark 01 2024-09-04 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307302 Page: 3 of 37 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240800307302 Page: 4 of 37 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................10 6.1 Antenna Requirement .................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 Radio Spectrum Matter Test Results ................................................................................................11 7.1 20dB Bandwidth ..........................................................................................................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................11 7.1.4 Measurement Procedure and Data .........................................................................................11 7.2 Restricted Bands .........................................................................................................................16 7.2.1 E.U.T. Operation .....................................................................................................................16 7.2.2 Test Mode Description ............................................................................................................16 7.2.3 Test Setup Diagram .........................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2408003073AT FCC ID: 2AHAS-PWC81038 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Mains Power Port (150kHz-30MHz) Radiated Emissions (9kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Emissions (30MHz-1GHz) - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 6 RF Exposure Setup Photos for SZCR2408003073AT FCC ID: 2AHAS-PWC81038 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 6 Photographs Top SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 6 Side 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 4 of 6 Side 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 5 of 6 Side 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 6 of 6 Side 4 - End of the Appendix -