2AHAS-XBE90143ELSTRYD OPEN-EAR BUDS

3劲 区 l' R E M E . PRINTER SLUG DIGITAL LIFESTYLE ACCESSORIES FOR TECH PACK BRAND: XTREME ADDITIONAL PRINTING PROCESSES: CATEGORY: Audio UV SPOT: GLOSS METALLIC FOIL: FILE NAME: XBE9-1043_Use『Manual DEBOSS: ITEM NUMBER: XBE9-1043 EMBOSS: VARNISHING TECHNIQUE: MATTE LAMINATION PRESS WORK: PRINT 1 /1. TRIM TO SIZE, SCORE, PRESS SPEC COLOR REFERENCES FOLD WHEN SPECIFIED SCALE:100% 口DIELINE ASSEMBLED PACKAGE DIMENSIONS (In Inches) ■GLOSS UV SPOT WIDTH:3" I EMBOSSING (RELIEF) HEIGHT: 4.9" ■DEBOSSING (SUNKEN) DEPTH: DIELINE OVERALL DIMENSIONS (in Millimeters) .I - , I FOLDING LINE WIDTH: 78.065mm ·-· 俨 一 勹 HEIGHT: 124.873mm , , PRODUCT PLACEMENT • 一� MANUAL MATERIAL, THICKNESS & SIZE ■FOILING SUBSTRATE TYPE: ■GLUEFOLD MATTEARTPAPERC2S, 100gsm ■020mm SECURITY STICKERS PLACEMENT WINDOW: r- , INNER TRAY: 1 1 BLISTERORINNERTRAYPLACEMENT •-· BLISTER: ,-, 1 1 CLOTH LIFTTAG •-· PLASTIC BAG: MAGNET: ADDITIONAL PANTONE COLORS (NOT CMYK) VELCRO: SOLID COLOR NAME: SECURITY STICKERS: NEON COLOR NAME: HANG TAB COLOR/ MATERIAL/SIZE: METALLIC COLORS: FOAM VENDOR'S FOIL NAME/NUMBER: CORRUGATED BOARD: PAPERBOARD: FILE SAVED AS: USER MANUAL: PRINT 1/1 IN BLACK ONLY .al= FULLY EDITABLE -OUT.ai = OUTLINED PACKAGING TYPES .pdf = Acrobat . j pg = Flat ima ge FOLDING CARTON: .png = DIGITAL (transparent background) FOLDING CARTON WITH DOOR PANEL: RIGIT GIFT BOX: APPROVAL CHECKLIST: CLAMSHELL: PRIMARY DESIGNER: Rita Manukyan SLIDING/SLIPCASE: DATE: 12/08/2025 SECONDARY DESIGNER: TRAPPED BLISTER CARD DATE: BLISTER CARD: PROOFREAD: OTHER: DATE: APPROVED BY: DATE: AUTHORIZATION SIGNATURES: Press Ready Artwork. DO NOT PRINT THIS LAYER: Printer Slug PRINTABLE LAYER: Manual Artwork When folded, please make sure that this title page is visible and not folded inside. FRONT PAGE OPERATIONS 叨ERON, To turn on the ea「buds,simply remove them from the charging case. They will power on automatically, enter Bluetooth search mode, and provide a voice prompt "Power On" with lights flashing Alternatively, 1f the earbuds are off and outside the case, press and hold the button for 5 seconds. The same voice prompt and LED 1nd1cator pattern will confirm they are powering on POWER OFF: The earbuds can be turned off 1n the following ways Return to Case or Hold button for 5s NOTE: When powering off, both earbuds will turn off but when powering on, you have to turn on each earbud Individually BLUETOOTH PAIRI心 The earbuds first pa1rw1th each other when powered on, then go into pairing mode (The main earbud indicated light fast flash, while the secondary ears have no lights.)Turn on Bluetooth on your phone and connect to "Xtreme XBE9-0143-BLK" or "Xtreme XBE9-0142-RSG' NOTE: , Earbuds will automatically「econnectto the device 11 back w1th1n effective range wrthin -5 minutes. If not, manual connection 1s required Earbuds auto power off after 5 minutes of disconnection , The earbuds will enter the disconnected state 11 they move out of Bluetooth range or if Bluetooth is manually turned off on the phone. In this state, the earbuds will go back into Bluetooth pairing mode MUSIC MODE Play/Pause, Double-p「essleft or right touch cont「ola「ea Previous Track, Triple-press left touch control area, Next Track, Triple-press right touch control a「ea CALL MODE Answer/End, Double-press left or right touch control area Reject Call: Press and hold left or nghttouch control area for 2 seconds, with an audible prompt Voice Assistant I Sirl, Quadruple press left or right touch central area You will hear a tone to confirm the act1vat1on FCC STATEMENT Any changes or modifications not expressly approved切theparty 「espons心lefor compliance could void this user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is sub1ect to the following two cond1t1ons . (1) This device may not cause harmful interference, and (2) this device must accept any 1nte「ference 「eceived,including interference that may cause undesired operation Note . This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 1n accordance with the 1nstruct1ons, may cause harmful interference to radio communications. However, there is no gua「anteethat interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or telev1s1on reception, which can be determined切turningthe equipment off and on, the user is encouraged to try to cor「ect interfe「encebyoneo「moreof the following measures • Reorient or relocate the receiving antenna ·Increase the sepa「ationbetween the equipment and receiver • Connect the equipment into an outlet on a ci「cuitdifferent from that to which the receiver is connected • Consult the dealer o『anexperienced「ad10/TVtechnician fo『help FCC Radiation Exposure Statement Thisequ,pm的tcomplies with FCC radiation exposure limits set forth for an uncont『olledenvi『onment ＠ (O... GoGetXtreme ) 。 ONE YEAR LIMITED WARRANTY Xtremewar「ants,ts products for one year against defects in manufacturing under regula「consumeruse with ong,nal「eceiptof retail pu「chase.We believe 1n ou「p「oductsand want to provide you with a replacement, if needec, but we have to know about the problem while the produ如sstill uncer warranty. If you discover a defect covered by this warranty, please contact us about rece1v1ng a replacement. In o「de「touse the products war「antythecustomer must provide proof of the retailers receipt • Any customers outside of the U S. will be responsible for sh1pp1ng and handling charges if a replacement is required that is not due to a manufacturing defect If there 1s not a manufacturing defect, shipping and handling will be applied Xtreme's warranty 1s hmrted to our products only. Our wa「『antydoes not cover the「eplace…

Text truncated - open the document above for the full version.

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel ： +1 732-339-9800 Fax: +1 732-481-0300 E-mail ： [email protected] FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, JEM ACCESSORIES INC. hereby declare that ： Product Name: STRYD OPEN-EAR BUDS Model No.:XBE9-0143-BLK, XBE9-0143-RSG FCC ID: 2AHAS-XBE90143EL For BT Mode: BLE 1M/2M are disable by software. For Below are activated: Bluetooth BDR(GFSK), EDR(π/4 ‐ DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturer’s responsibility to provide the radio configurations to ensure compliance with Commission’s rules. Sincerely, Signature Printed Name: Nathan Shamula Title: COO

CFR 47 §2.911(d)(5)(i) Attestation Letter JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：+1 732-339-9800 Fax: +1 732-481-0300 E-mail：[email protected] Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7 435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FC C ID: 2AHAS-XBE90143EL JEM ACCESSORIES INC. (“the applicant”) certifies that the equ ipment for which authorization is sought is not “covered” eq uipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Perso n: Nathan Shamula Title: COO

CFR 47 §2.911 (d)(5)(ii) Attestation Letter JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel ：+1 732-339-9800 Fax: +1 732-481-0300 E-mail ： [email protected] Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7 435 Oakland Mills Road C olumbia, MD 21046 Ref: Attestation Statements CFR 47 § 2.911(d)(5)(ii) Filing FCC ID: 2AHAS-XBE90143EL J EM ACCESSORIES INC. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an en tity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its su ccessors and assignees, which is also on the “covered list”. Sincerely, Signature: Contact Person: Nathan Shamula Title: COO Date: 2026-01-30

U.S. AGENT LETTER OF ATTESTATION Date: 2026-01-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Div ision 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 § 2.911(d)(7) Filing FCC ID: 2AHAS-XBE90143EL JEM ACCESSORIES INC. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC. is our designated U. S. agent for service of process for the above referenced FCC ID. JEM AC CESSORIES INC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: JEM ACCESSORIES INC . Address: 3 2 Brunswick Avenue, Ed iso n, New Jersey, United States,08817 FRN: 0025209164 Tel.: +1 732-339-9800 Email: [email protected] Signed by (printed name): Nathan Sh amula Signature:

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 Tel：+1 732-339-9800 Fax: +1 732-481-0300 E-mail：[email protected] FCC Authorization Date: 2026-01-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, JEM ACCESSORIES INC. the undersigned, hereby authorize Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signingof all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Nathan Shamula Title: COO QA-FR-170-B

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 Tel: +1 732-339-9800 Fax: +1 732-481-0300 E-mail: [email protected] FCC Confidential Authorization Date: 2026-01-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road C olumbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2 AHAS-XBE90143EL In accordance with Sections 0.457 and 0.459 of the Commission’s Ru les, JEM ACCESSORIES INC. hereby r equests lo ng-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Printed Name: Nathan Shamula Title: COO

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel ： +1 732-339-9800 Fax: +1 732-481-0300 E-mail：[email protected] FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC., hereby declare that we have a product named as STRYD OPEN-EAR BUDS (Model No.: XBE9-0143-BLK, FCC ID: 2AHAS-XBE90143EL) was tested by Shenzhen Accurate Technology Co., Ltd., meanwhile, for our marketing purpose, we would like to list a series model (XBE9-0143-RSG) on reports and certificate, all the models are identical in electrically, the difference as below. 1. Different Model No. 2. Different color We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Printed Name: Nathan Shamula Title: COO

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel ： +1 732-339-9800 Fax: +1 732-481-0300 E-mail ： [email protected] FCC certification No. Cover Letter We, JEM ACCESSORIES INC., hereby submit justification for placing the FCC certification No. in the associated user’s manual and charging case. According to the FCC regulation, the FCC certification No. should be printed on the earbuds, but as the earbuds are too small to print the label (FCC ID: 2AHAS-XBE90143EL) , it will be moved to the user manual and charging case. The details are as below: A. Side surface (A): The side surface does not provide enough physical space to fit the printing of the FCC certification No. accordingto below reference picture. B. Top cover (B): The top cover does not provide enough physical space to fit the printing of the FCC certification No. accordingto below reference picture. Conclusion: Based on the above description of area A to B, we conclude that the device is unquestionably too small for enabling the FCC certification No. to be printed onto any surface. We therefore request to move the FCC certification No. to the user’s manual and charging case. Label and label location: Best regards, Signature: Printed Name: Nathan Shamula Title: COO

Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT External Photos External Photos Page 1 / 5 External Photos Model: XBE9-0143-RSG(Left), Model: XBE9-0143-BLK(Right) Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT External Photos External Photos Page 2 / 5 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT External Photos External Photos Page 3 / 5 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT External Photos External Photos Page 4 / 5 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT External Photos External Photos Page 5 / 5 ***** END *****

Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 1 / 6 Internal Photos Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 2 / 6 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 3 / 6 Antenna Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 4 / 6 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 5 / 6 Shenzhen Accurate Technology Co., Ltd. No.: 2604P41224E-RF EUT Internal Photos Internal Photos Page 6 / 6 ***** END *****

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 6 TR-4-E-R063 TEST REPORT Applicant Name: JEM ACCESSORIES INC. Address 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 Report Number: 2604P41224E-RF FCC ID: 2AHAS-XBE90143EL Test Standard (s) FCC PART 2.1093 Sample Description Product Name: STRYD OPEN-EAR BUDS Model No.: XBE9-0143-BLK, XBE9-0143-RSG Trade Mark: N/A Date Received: 2026-01-13 Report Date: 2026-01-22 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Bob. Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2604P41224E-RF Rev:A/4.0(2024/11/01) Page 2 of 6 TR-4-E-R051 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 3 GENERAL INFORMATION ............................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 4 OBJECTIVE ................................................................................................................................................... 4 TEST FACILITY .............................................................................................................................................. 4 RF EXPOSURE .............................................................................................................................................. 5 APPLICABLE STANDARD ................................................................................................................................. 5 RESULT ........................................................................................................................................................ 5 EXHIBIT A-EUT PHOTOGRAPHS ................................................................................................................ 6 Shenzhen Accurate Technology Co., Ltd. Report No.: 2604P41224E-RF Rev:A/4.0(2024/11/01) Page 3 of 6 TR-4-E-R051 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision Rev.00 2604P41224E-RF Original Report 2026-01-22 Shenzhen Accurate Technology Co., Ltd. Report No.: 2604P41224E-RF Rev:A/4.0(2024/11/01) Page 4 of 6 TR-4-E-R051 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product Name STRYD OPEN-EAR BUDS Tested Model XBE9-0143-BLK Multiple Model XBE9-0143-RSG Model Difference # All the models are identical in electrically, the difference is model name and color. Please refer to DOS letter for details. The applicant provided “XBE9-0143-BLK” for testing. Frequency Range Bluetooth: 2402-2480MHz Maximum Conducted Output Power 1.02 dBm Antenna Specification # Internal Antenna: 1.66 dBi (It is provided by the manufacturer.) Voltage Range # DC 3.7V from rechargeable battery Sample Serial Number 3FX4-3 (RF Conducted Test)(Assigned by ATC, Shenzhen) Sample/EUT Status Good condition Objective This test report is in accordance with Part 2-Subpart J, Part 15-Subparts C and Part 2-Subpart J, Radiofrequency Radiation Exposure of the Federal Communication Commission rules. The tests were performed in order to determine compliance with FCC §2.1093 rules. Test Facility The test site used by Shenzhen Accurate Technology Co., Ltd. to collect test data is located on the Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Accredited by American Association for Laboratory Accreditation (A2LA).The Certificate Number is 4297.01. Shenzhen Accurate Technology Co., Ltd. Report No.: 2604P41224E-RF Rev:A/4.0(2024/11/01) Page 5 of 6 TR-4-E-R051 RF EXPOSURE Applicable Standard According to FCC §2.1093, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance v06, The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where 1. f(GHz) is the RF channel transmit frequency in GHz. 2. Power and distance are rounded to the nearest mW and mm before calculation. 3. The result is rounded to one decimal place for comparison. 4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test Exclusion. Result For worst case: Frequency (MHz) Tune-Up Conducted Output Power # (dBm) Tune-Up Conducted Output Power # (mW) Distance (mm) Calculated Value Threshold (1-g SAR) SAR Test Exclusion 2402-2480 1.50 1.41 5 0.44 3 Yes Note: The tune-up conducted power is declared by the applicant. Result: No SAR test is …

Text truncated - open the document above for the full version.

Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 1 产品规格承认书 SPECIFICATIONS 客户: CUSTOMER: 产品名称: DESCRIPTION: Antenna 客户型号: CUSTOMER PART NO: 产品型号: OUR MODEL NO:PBX1608MC01 日期: DATE: 确认签字,盖章后请返回承认书一份 PLEASE RETURN TO US ONE COPY OF “SPECIFICATION FOR APPROVAL” WITH YOUR APPROVED SIGNATURES Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 2 PBX1608MC01 Specification 1. Features : ●Stable and reliable in performances ●Low profile，compact size ●RoHS compliance ●SMT processes compatible 2. APPLICATIONS : ●ISM 2 . 4 GHz applications ●ZigBee/BLE applications ●Bluetooth earphone systems ●Hand-held devices when WiFi/Bluetooth functions are needed，e.g.，Smart phones ●IEEE802.11 b/g/n ●Wireless PCMCIA cards or USB dongles 3. Part Number Information Patch ceramic antenna Size Antenna type S: Dual-pole, D: Single-poleS: Dual-pole, D: Single-poleS: Dual-pole, D: Single-poleS: Dual-pole, D: Single-poleS: Dual-pole, D: Single-pole Frequency Product type Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 3 4. Product dimensions: 5. Electrical Specification: Electrode thickness Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 4 6. 2 nd Evaluation Board Dimension Recommended PCB for 1608 bipolar antenna Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 5 Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 6 7. Measurement Results Return Loss 7.2 Radiation Pattern Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-1608 Specification DOCUMENT NO. 1608 SPEC REV. P1 7 8. Raliability and Test Condictions 9. Soldering and Mounting Shenzhen Pengbanxingye Technology Co.,Ltd. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± Shenzhen Pengbanxingye Technology Co.,Ltd. Room 605, Building 4, 1970 Science and Technology Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen SCALE：N/AUNIT：mm THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WIT…

Text truncated - open the document above for the full version.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked ―#‖ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 73 TR-4-E-R014 TEST REPORT Applicant Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 Report Number: 2604P41224E-RF-00A FCC ID: 2AHAS-XBE90143EL Test Standard (s) FCC PART 15.247 Sample Description Product Name: STRYD OPEN-EAR BUDS Model No.: XBE9-0143-BLK, XBE9-0143-RSG Trade Mark: N/A Date Received: 2026-01-13 Report Date: 2026-01-22 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Bob. Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2604P41224E-RF-00A Rev:A/4.0(2024/11/01) Page 2 of 73 TR-4-E-R014 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 4 GENERAL INFORMATION ............................................................................................................................ 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 5 OBJECTIVE ................................................................................................................................................... 6 TEST METHODOLOGY .................................................................................................................................... 6 TEST FACILITY .............................................................................................................................................. 6 MEASUREMENT UNCERTAINTY ....................................................................................................................... 6 SYSTEM TEST CONFIGURATION ................................…

Text truncated - open the document above for the full version.