2AHAS-XBS91058HP3pc Audio Essentials Bluetooth Speaker Headphones and Earbuds Gift Set

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue Edison, NJ 08817,United States Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] Date: 2023/4/23 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, JEM ACCESSORIES INC. hereby declare that： Product Name: 3pc Audio Essentials Bluetooth Speaker Headphones and Earbuds Gift Set Model No.: XBH9‐1021, XBS9‐1058-SIL,XBS9-1058 FCC ID: 2AH AS‐XBS9 1058HP Only support BDR (GFSK), EDR (π/4-DQPSK), For EDR (8DPSK), BLE 1M/2M are disable by software. Exce pt fo r the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the ma nufacturer’s responsibility to provide the radio configurations to ensure compliance with Commission’s rules. Sincerely, Signature: Printed Name: Eli Dabbah Title: Manager

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023/4/23 Product Similarity Declaration To Whom It May Concern, We, JEM ACCESSORIES INC. hereby declare that we have a product named as 3pc Audio Essentials Bluetooth Speaker Headphones and Earbuds Gift Set, (Model No.: XBH9‐1021, FCC ID: 2AHAS‐ XBS91058HP) was tested by Shenzhen Accurate Technology Co.,Ltd., meanwhile, for our marketing purpose, we would like to list a series model No.: XBS9‐1058‐SIL, XBS9‐1058 on reports and certificate, all the models are identical in electrically, And no other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature: Printed Name: Eli Dabbah Title: Manager the difference are model number.

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 ： Tel 908-222-7501 Fax: 908.222.7504 E- ： mail [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 02/17/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AHAS-XBS91058HP JEM ACCESSORIES INC. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Contact Person: Eli Dabbah Title: Manager Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 ： Tel 908-222-7501 Fax: 908.222.7504 E- ： mail [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter QA-FR-1007-A RC 02-08-2023 Attestation Letter Date: 2023/4/23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AHAS-XBS91058HP JEM ACCESSORIES INC. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Eli Dabbah Title: Manager Company Name: JEM ACCESSORIES INC. Company Address: 32 Brunswick Avenue, Edison, New Jersey, United States,08817

U.S. AGENT LETTER OF ATTESTATION Date: 2023-04-23 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AHAS-XBS91058HP JEM ACCESSORIES IN C. certifies that, as of the date of the filing of the application, JEM ACCESSORIES INC.is our designated U.S. agent for service of process for the above referenced FCC ID. JEM ACCESSORIES INC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. JEM ACCESSORIES INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: JEM ACCESSORIES INC. Address: 32 Brunswick Avenue, Edison, New Jersey, United States, 08817 FRN: 0025209164 Tel.: 908-222-7501 Emai l: [email protected] Signed by (printed n ame): Eli Dabbah Signature:

2402-2480MHz

JEM ACCESSORIES INC. Add: 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Tel：908-222-7501 Fax: 908.222.7504 E-mail：[email protected] FCC Authorization 2023/4/23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, JEM ACCESSORIES INC. the undersigned, hereby authorize Shenzhen Accurate Technology Co.,Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co.,Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Eli Dabbah Title: Manager QA-FR-170-B

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF External Photos Page 1 of 4 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF External Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF External Photos Page 3 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF External Photos Page 4 of 4

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF LABEL AND LOCATION Page 1 of 1 FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF Internal Photos Page 1 of 4 Internal photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF Internal Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF Internal Photos Page 3 of 4 Antenna Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF Internal Photos Page 4 of 4

Operation Description Battery ( DC 3.7V) provides energy for the Bluetooth chip (AC6925F); Crystal oscillator (24MHz) provi des the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna (2402-2480MHz). When the product is connected, the product can in two-way communication with other Bluetooth Devices, and then the device’s Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit. Modulation Technique: GFSK, π/4-DQPSK W hen need charging, input USB cable, and connected to the power supply, red light on, the light will change to green light when is power up.

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230420-17135E-RF-00 Version 7: 2023-01-30 Page 11 of 51 FCC-BT FCC§15.247 (i), §1.1307 (b) (1) &§2.1093 – R F EXPOSURE Appli cable Standard According to FCC §2.1093 and §1.1307(b) (1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance The 1-g and 10-g SAR test exclusio n thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where 1. f (GHz) is the RF channel transmit frequency in GHz. 2 . Power and distance are rounded to the nearest mW and mm before calculati on. 3 . The result is ro unded to one decimal place for comparison. 4. W hen the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determi ne SAR test Exclusio n. Measurement Result For worst case: Mode Frequency (MHz) Max tune-up conducted power* (dBm) Max tune-up conducted power* (mW) Distance (mm) Calculated value (1-g SAR) Threshold (1-g SAR) SAR Test Exclusion BT 2402-2480 7.0 5.01 5 1.58 3.0 Yes Resul t: Compliant.

REVISION RECORD APPROVED:ECO NO:LTRDATE: 123456 D C B A C D B A MCU MIC C2 NC C1 NC 12 34 Y1 24M C4 105 C8 105 C6 105 K1 K2 K3 R5 10K R3 20K 1 2 3 4 5 6 7 8 9 10 11 1213 14 15 16 17 18 19 20 21 22 23 24 U1 AC6925F D1 RLED D2 BLED R4 1K 1 VIN 2 DM 3 DP 4 GND 5 GND 67 98 USB1 MNIUSB D4 5819 R11.5R 1 R/L- 1 R+ 1 L+ R7 6.8K C10 NC C9 NC + M2 MICROPHONE2 C11 104 R12 1K D3 5819 2 3 1 Q1 3906 R2 1K 1 AUDET C5 105 C3 105 C7 105 12 ANT BT_OSCIBT_OSCO BT_OSCO BT_OSCI VCOMO DACL DACR ADKEY LEDB +5V DACR DACL VCOMO DACR VCOMO DACL DACVDD MIC LEDB PH_DET LEDR BAT+ +5V LEDR LEDR DM DP DM DP MIC DACVDD +3.3V PH_DET +VCC ADKEY +VCC

ITEMModel NameMaximum GainPolarizationImpedanceManufactureAddress Antenna Photo & Length (mm) -0.58dBi Azimuth BeamPattern Omni-directional Horizontal and Vertical ZHUHAI JIELI TECHNOLOGY CO.,LTD 50 Ohm 333 Kexing Rd,Nanping Town,Xiangzhou Dist,Zhuhai City,Guangdong Province,China Antenna S p ecificatio n ANT SPEC 2.4G ANT Frequency /MHz Gain/ dBi 2400 -0.92 2410 -0.85 2420 -0.81 2430 -0.76 2440 -0.58 2450 -0.65 2460 -0.59 2470 -0.79 2480 -0.87 2490 -0.98 2500 -1.02 3D Radiation Pattern

Note: This report may contain data that are not covered by the A2LA ★ accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503290 Web: www.atc-lab.com Version 7: 2023-01-30 Page 1 of 51 FCC-BT TEST REPORT Applicant Name : JEM ACCESSORIES INC. Address : 32 Brunswick Avenue, Edison, New Jersey, United States,08817 Report Number : RA230420-17135E-RF-00 FCC ID: 2AHAS-XBS91058HP Test Standard (s) FCC PART 15.247 Sample Description Product Type: 3pc Audio Essentials Bluetooth Speaker Headphones and Earbuds Gift Set Model No.: XBH9-1021 Multiple Model(s) No.: XBS9-1058-SIL, XBS9-1058 Trade Mark: N/A Date Received: 2023/04/20 Report Date: 2023/06/08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Dave Liang Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA230420-17135E-RF-00 Version 7: 2023-01-30 Page 2 of 51 FCC-BT TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 SPECIAL ACCESSORIES ................................................................................................................................................. 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 EXTERNAL I/O CABLE .................................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC§15.247 (I), §1.1307 (B) (1) &§2.1093 – RF EXPOSURE ..................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC §15.205, §15.209 & §15.247(D) – RADIATED EMISSIONS .......................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 EUT SETUP ................................................................................................................................................................ 13 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 14 TEST PROCEDURE ..............................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230420-17135E-RF Test Photos Page 1 of 1 Photo of Radiated Emission Measurement (Below 1G) Photo of Radiated Emission Measurement (Above 1G)