2AHAS-XWC81025EWireless Charging

Applicant Declaration QSF27-14-04Rev 1.4April25, 2025Page1of1Original Issue: Jan. 4,2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States ApplicantLegal Business Name JEM ACCESSORIES INC. Address 32 Brunswick Avenue,Edison,New Jersey 08817,United States FRN 0025209164 Grantee Code 2AHAS FCC ID: 2AHAS-XWC81025E Authorized Contact Name Nathan Shamula ContactPhone 7323399800 Contact Email [email protected] I, the undersigned,certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best ofmy knowledge and belief. b)in accepting a Grant of Equipment Authorization issued byaTCB, under the authority of the FCC, as a result of the representations made in this application, theApplicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)iftheApplicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909and KDB394321, theApplicant has read, understood and agrees to acceptthat they are the responsible partyandagree toabide by theirresponsibilities as specified under 47 CFR 2.909and KDB394321. e)in accordance with ISO17065, FCC KDB641163,FCC KDB610077, KDB394321and RSP-100, theApplicanthas read, understood, accepts andagreesto abide by thepost marketsurveillance requirements. (1)the Applicant understands,accepts and agrees that a samplemay be requested for surveillance testing. (2)theApplicantshallmake provisions to always have a production sample available upon request by SGS, FCCand/or ISED. (3)theApplicantshall, upon request by SGS, at theApplicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISEDas instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither theApplicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant toSection 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)theApplicant hasread, understood, acceptsand agreestoabide bythe SGS North America, Inc.terms and conditionsas specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List:Covered List ApplicantSignature: Date:01/31/2026 Print Name: Nathan Shamula Title: COO *NOTE:This declaration cannot be signed by an Agent,itshallbe signed byanauthorized person listed in the FCC database

UNITEDSTATESDESIGNATED AGENT LETTER Date:01/31/2026 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 ApplicantU.S. designated agent Company Name:JEM ACCESSORIES INC.Company Name:JEM ACCESSORIES INC. FRN0025209164FRN0025209164 Grantee Code:2AHAS Contact Name:Nathan ShamulaContact Name:Nathan Shamula Address:32 Brunswick AvenueAddress:32 Brunswick Avenue City/Province/Zip:Edison,New Jersey 08817, United States City/Province/Zip:Edison,New Jersey 08817, United States Telephone:(732) 339-9800Telephone:(732) 339-9800 Fax:(732) 481-0300Fax:(732) 481-0300 Email:[email protected]:[email protected] Applicable Equipment:FCC ID:2AHAS-XWC81025E ATTN: Director of Certification: We,<JEM ACCESSORIES INC.>understand and acknowledge the applicants consent andthe designated agent’s obligation to accept service of processin the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We,<JEM ACCESSORIES INC.>acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Name(Printed):Nathan Shamula Title:COO Signature:

Date:01/31/2026 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:FCC ID:2AHAS-XWC81025E To whom it may concern: We, the undersigned, herebyauthorizeSGS-CSTC Standards Technical Services Co., Ltd.(SGS) Shenzhen Branchto act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out bythe agent onour behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides withJEM ACCESSORIES INC. This authorization is valid until further written notice from the applicant. PrintName:Nathan ShamulaTitle:COO Signature: On behalf of Company:JEM ACCESSORIES INC. Telephone:7323399800 E-mail:[email protected]

TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:Confidentiality Request regarding application forFCC ID:2AHAS-XWC81025E LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information notreleased to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or180days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Nathan ShamulaTitle:COO Signature: On behalf of Company: JEM ACCESSORIES INC. Telephone: 7323399800 E-mail: [email protected]

FCC COVERED LISTDECLARATIONLETTER Page1of1Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States ApplicantLegal Business NameJEM ACCESSORIES INC. Address32 Brunswick Avenue,Edison,New Jersey 08817,United States FRN0025209164 Grantee Code2AHASFCC ID:2AHAS-XWC81025E Authorized Contact NameNathan Shamula ContactPhone7323399800Contact [email protected] JEM ACCESSORIES INC.(“the applicant”) certifies: -theequipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. -as of the dateof the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, asan entity producing “covered” equipment. -the softwareto be loaded prior to marketing of the equipment identified aboveis not“covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. -the deviceis notcapable of storing or running software listed on the covered list and therefore isinherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List:Covered List ApplicantSignature:Date:01/31/2026 Print Name: Nathan Shamula Title: COO *NOTE:This declaration cannot be signed by an Agent,itshallbe signed byanauthorized person listed in the FCC database

Label Location：at the bottom of the device

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042503 Page: 1 of 11 Keny Xu EMC Laboratory Manager 1 Cover Page TEST REPORT Application No.: SZCR2601000425AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue, Edison, New Jersey 08817 United States Manufacturer: HONG KONG ETECH GROUPS LIMITED Address of Manufacturer: 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road, Baoan District, ShenZhen Factory: PHUC MINH HUY MANUFACTURING AND TRADING LIMITED COMPANY Address of Factory: An long Hamlet, Yen My Village, Lang Giang District, Bac Giang Province, Viet Nam Equipment Under Test (EUT): EUT Name: Wireless Charging Model No.: XWC8-1025-PP1, XWC8-1025-BLK   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Xtreme FCC ID: 2AHAS-XWC81025E Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt: 2026-01-28 Date of Test: 2026-01-31 to 2026-02-26 Date of Issue: 2026-06-10 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042503 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2026-06-10 Original Authorized for issue by: Mira He/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042503 Page: 3 of 11 2 Contents 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 Details of E.U.T. ................................................................................................................................. 4 3.2 Description of Support Units .............................................................................................................. 4 3.3 Test Location ...................................................................................................................................... 5 3.4 Test Facility ........................................................................................................................................ 5 3.5 Deviation from Standards ................................................................................................................... 5 3.6 Abnormalities from Standard Conditions ........................................................................................... 5 4 Equipments Used during Test ................................................................................................................. 6 5 Test Mode Description ............................................................................................................................. 8 6 Test Block Diagram .................................................................................................................................. 9 7 Test Results ............................................................................................................................................. 10 7.1 RF Exposure test ............................................................................................................................. 10 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Measurement Data ...................................................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042503 Page: 4 of 11 3 General Information 3.1 Details of E.U.T. Power supply: Micro USB Input:5V 2A/9V 1.8A Wireless Output: 10w Cable(s): Micro USB to USB A cable 120cm Operation frequency: 126.9000 - 129.8000kHz Modulation type: Load modulation Remark 1: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark 2: Model No.: XWC8-1025-PP1, XWC8-1025-BLK Only the model XWC8-1025-PP1 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used, internal wiring and functions were identical for all the above models, with only difference on model No.. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter HONOR HN-200500CP0 REF. No.SEA05R03H Mobile Phone SAMSUNG SM-G9810 REF. No.SEA16K00 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042503 Page: 5 of 11 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for …

Text truncated - open the document above for the full version.

Document Number Name of a part Product size A 20.5±0.5 B 39.0±1.0 C 43.5±0.5 D 35±2 E 40AX F 1.17±0.1 G 0.6±0.1 H 1.8±0.1 Φ39.0*20.5 Test Frequency Test mode Wire stock Numberof turns Disk SizeL Coil Size 126.9-129.8kHz Series Test Customer Feedback TabulationYan ZhangExamine and verifyAffirmChen LihuaDate 20230626 Unit：MM 0.08 × 48 shares Winding MethodSingle-wire stranded winding type Rem arks The coil rotates counterclockwise. 11 Ts Φ43.5*Φ5*0.6 6.8±10% Shenzhen Yongman Digital Co., Ltd. Specification Wireless Transceiver Coil Module Φ43.5*Φ5*H1.8 Adhesion MethodHot air self-adhesion

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042502 Page: 1 of 29 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2601000425AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue, Edison, New Jersey 08817 United States Manufacturer: HONG KONG ETECH GROUPS LIMITED Address of Manufacturer: 16/F, Block C, 2nd Phase of Central Avenue, Haihong Industrial Area, Xixiang Road, Baoan District, ShenZhen Factory: PHUC MINH HUY MANUFACTURING AND TRADING LIMITED COMPANY Address of Factory: An long Hamlet, Yen My Village, Lang Giang District, Bac Giang Province, Viet Nam Equipment Under Test (EUT): EUT Name: Wireless Charging Model No.: XWC8-1025-PP1, XWC8-1025-BLK   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Xtreme FCC ID: 2AHAS-XWC81025E Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2026-01-28 Date of Test: 2026-01-31 to 2026-02-26 Date of Issue: 2026-06-10 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042502 Page: 2 of 29 Revision Record Version Chapter Date Modifier Remark 01 2026-06-10 Original Authorized for issue by: Mira He/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042502 Page: 3 of 29 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Restricted Bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2020) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2020) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Model No.: XWC8-1025-PP1, XWC8-1025-BLK Only the model XWC8-1025-PP1 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used, internal wiring and functions were identical for all the above models, with only difference on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260100042502 Page: 4 of 29 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 20dB Bandwidth ............................................................................................................................... 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.3 Test Setup Diagram ..................................................................................................................... 11 7.1.…

Text truncated - open the document above for the full version.