2AHAS-XWC81047Gmagnetic watch charger -TYPE C WHT

Applicant Declaration QSF27-14-04Rev 1.4April25, 2025Page1of1Original Issue: Jan. 4,2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States ApplicantLegal Business Name JEM ACCESSORIES INC. Address 32 Brunswick Avenue Edison New Jersey 08817 United States FRN 0025209164 Grantee Code 2AHAS FCC ID: 2AHAS-XWC81047G Authorized Contact Name Nathan Shamula ContactPhone 7323399800 Contact Email [email protected] I, the undersigned,certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best ofmy knowledge and belief. b)in accepting a Grant of Equipment Authorization issued byaTCB, under the authority of the FCC, as a result of the representations made in this application, theApplicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)iftheApplicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909and KDB394321, theApplicant has read, understood and agrees to acceptthat they are the responsible partyandagree toabide by theirresponsibilities as specified under 47 CFR 2.909and KDB394321. e)in accordance with ISO17065, FCC KDB641163,FCC KDB610077, KDB394321and RSP-100, theApplicanthas read, understood, accepts andagreesto abide by thepost marketsurveillance requirements. (1)the Applicant understands,accepts and agrees that a samplemay be requested for surveillance testing. (2)theApplicantshallmake provisions to always have a production sample available upon request by SGS, FCCand/or ISED. (3)theApplicantshall, upon request by SGS, at theApplicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISEDas instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither theApplicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant toSection 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)theApplicant hasread, understood, acceptsand agreestoabide bythe SGS North America, Inc.terms and conditionsas specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List:Covered List ApplicantSignature: Date:2026-03-26 Print Name: Nathan Shamula Title: COO *NOTE:This declaration cannot be signed by an Agent,itshallbe signed byanauthorized person listed in the FCC database

FCC COVERED LISTDECLARATIONLETTER Page1of1Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia30024 United States Applicant Legal Business NameJEM ACCESSORIES INC. Address32 Brunswick AvenueEdisonNew Jersey08817United States FRN0025209164 Grantee Code2AHASFCC ID:2AHAS-XWC81047G Authorized Contact NameNathan Shamula Contact Phone7323399800Contact [email protected] Wecertifies: -theequipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. -as of the dateof the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, asan entity producing “covered” equipment. -the softwareto be loaded prior to marketing of the equipment identified aboveis not“covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. -the deviceis notcapable of storing or running software listed on the covered list and therefore isinherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List:Covered List ApplicantSignature:Date:2026-03-26 Print Name: Nathan Shamula Title: COO *NOTE: This declaration cannot be signed by an Agent,itshallbe signed byanauthorized person listed in the FCC database

UNITEDSTATESDESIGNATED AGENT LETTER Date:2026/03/26 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 ApplicantU.S. designated agent Company Name:JEM ACCESSORIES INC.Company Name:JEM ACCESSORIES INC. FRN:0025209164FRN:0025209164 Grantee Code:2AHAS Contact Name:Nathan ShamulaContact NameNathan Shamula Address:32 Brunswick AvenueEdison New Jersey08817United States Address:32 Brunswick AvenueEdison New Jersey08817United States Telephone:7323399800Telephone:7323399800 Fax:7324810300Fax:7324810300 Email:[email protected]:[email protected] Regarding:FCC ID:2AHAS-XWC81047G We,<JEM ACCESSORIES INC.>understand and acknowledge the applicants consent andthe designated agent’s obligation to accept service of processin the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We,<JEM ACCESSORIES INC.>acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant/U.S. designated agent Name(Printed):Nathan Shamula Title:COO Signature:

JEM ACCESSORIES INC. Date:2026/03/26 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:FCC ID:2AHAS-XWC81047G To whom it may concern: We, the undersigned, hereby authorizeSGS-CSTC Standards Technical Services Co., Ltd. (SGS)to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides withJEM ACCESSORIES INC. This authorization is valid until further written notice from the applicant. Print Name:Nathan ShamulaTitle:COO Signature: On behalf of Company:JEM ACCESSORIES INC. Telephone:7323399800 E-mail:[email protected]

JEM ACCESSORIES INC. TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:Confidentiality Request regarding application forFCC ID:2AHAS-XWC81047G LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of thecommission’srules, the applicantherebyrequest confidential treatment of the documents listed below,associatedwith the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information notreleased to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Nathan ShamulaTitle:COO Signature: On behalf of Company: JEM ACCESSORIES INC. Telephone: 7323399800 E-mail: [email protected]

Jem Accessories, Inc.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106803 Page: 1 of 10 Keny Xu EMC Laboratory Manager 1 COVER PAGE Human Exposure Report Application No.: SZCR2603001068AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue, Edison, New Jersey, 08817 United States Manufacturer: SHENZHEN MAI XIN DA TECHNOLOGY CO., LTD. Address of Manufacturer: R704-706, FuTong No.1 International building, Gushu, Bao'an District, Shenzhen, China. 518126 Factory: SHENZHEN MAI XIN DA TECHNOLOGY CO., LTD. Address of Factory: R704-706, FuTong No.1 International building, Gushu, Bao'an District, Shenzhen, China. 518126 Equipment Under Test (EUT): EUT Name: magnetic watch charger -TYPE C WHT Model No.: XWC8-1047-WHT FCC ID: 2AHAS-XWC81047G Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt: 2026-03-18 Date of Test: 2026-03-19 to 2026-03-24 Date of Issue: 2026-04-28 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106803 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2026-04-28 Original Authorized for issue by: Edison Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106803 Page: 3 of 10 2 Contents 1 COVER PAGE ............................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 Details of E.U.T. ................................................................................................................................. 4 3.2 Description of Support Units .............................................................................................................. 4 3.3 Test Location ...................................................................................................................................... 5 3.4 Test Facility ........................................................................................................................................ 5 3.5 Deviation from Standards ................................................................................................................... 5 3.6 Abnormalities from Standard Conditions ........................................................................................... 5 4 Equipments Used during Test ................................................................................................................. 6 5 Test Mode Description ............................................................................................................................. 8 6 Test Block Diagram .................................................................................................................................. 8 7 Test Results ............................................................................................................................................... 9 7.1 RF Exposure test ............................................................................................................................... 9 7.1.1 E.U.T. Operation ........................................................................................................................................ 9 8 Test Setup Photos .................................................................................................................................. 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106803 Page: 4 of 10 3 General Information 3.1 Details of E.U.T. Power supply: DC 5V, 1A Operation frequency: 327kHz to 329.8kHz Modulation type: Load modulation Antenna type: Loop Antenna Duty Cycle: 100% EUT function: This device is used to transfer power to a Smart device which with QI technology installed Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Watch Apple Series 5 REF. No.SEA32A00 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106803 Page: 5 of 10 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Standards …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106802 Page: 1 of 29 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2603001068AT Applicant: JEM ACCESSORIES INC. Address of Applicant: 32 Brunswick Avenue, Edison, New Jersey, 08817 United States Manufacturer: SHENZHEN MAI XIN DA TECHNOLOGY CO., LTD. Address of Manufacturer: R704-706, FuTong No.1 International building, Gushu, Bao'an District, Shenzhen, China. 518126 Factory: SHENZHEN MAI XIN DA TECHNOLOGY CO., LTD. Address of Factory: R704-706, FuTong No.1 International building, Gushu, Bao'an District, Shenzhen, China. 518126 Equipment Under Test (EUT): EUT Name: magnetic watch charger -TYPE C WHT Model No.: XWC8-1047-WHT FCC ID: 2AHAS-XWC81047G Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2026-03-18 Date of Test: 2026-03-19 to 2026-03-24 Date of Issue: 2026-04-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106802 Page: 2 of 29 Revision Record Version Chapter Date Modifier Remark 01 2026-04-28 Original Authorized for issue by: Edison Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106802 Page: 3 of 29 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Restricted Bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2020) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2020) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300106802 Page: 4 of 29 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 20dB Bandwidth ............................................................................................................................... 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.3 Test Setup Diagram ..................................................................................................................... 11 7.1.4 Measurement Procedure and Data............................................................................................. 11 7.2 Conducted Emissions at AC Mains Power Port (150kHz-30MHz) .................................................. 13 7.2.1 E.U.T. Operation .......................................................................................................................... 13 7.2.2 Test Mode Description .....................................................................…

Text truncated - open the document above for the full version.

Justification statement for Antenna To : F ederal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regard ing: FCC ID:2AHAS-XWC81047G Dear S ir/Madam, Only radiated measurements are used for EUT with FCC ID:2AHAS-XWC81047G to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The det ailed information for antenna as below shows: Design Specifications Typical Antenna Type Loop Antenna Working Frequency 327kHz to 32 9.8kHz Overall Dimensions See below Turns 10TS Line Diameter 0.08*24P Unit: mm A 8±0.05 B 2.8±0.02 C 3.6±0.02 D 23.5±0.02 E 24.5±0.3 F 9±0.05 G 5±0.2 H 7±1 J 2±1 K 2.6±0.2