2AHB5-AT3501Digital signage

Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual V1.0.0 HS-SIGNAGE-AT3511001 For more information, visit our website at: http://www.hanshow.com Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual I Hanshow Copyright Reserved © Zhejiang Hanshow Technology Co., Ltd. STATEMENT This document and all its contents contained remain the proprietary material of Zhejiang Hanshow Technology Co., Ltd. (Hanshow) and are protected by Chinese laws and applicable international conventions on copyrights. Any reproduction, transmission, disclosure, revision, modification or use otherwise of this document or the whole or part of its contents, in whatever form and by whatever means, is not permitted without prior express written authorization from Hanshow. Offenders will be liable for any and all damages caused by their offence hereof and will be subject to all remedies that Hanshow is entitled to seek under applicable laws. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This product is designed to be used indoors. The distance between user and device should be no less than 20cm. Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual II Hanshow Copyright Reserved © Zhejiang Hanshow Technology Co., Ltd. ABOUT THE DOCUMENT The manual mainly introduces functions, structure, hardware parameters, performance, installation, and precautions for shelf edge digital signage HS-AT3511. Thank you very much for shelf edge digital signage HS-AT3511. Please read the product manual carefully before using this product, retain the document for subsequent use or for the next owner. If the instructions contained in this manual are insufficient to resolve issues that occur during device operation or maintenance, please contact Hanshow Technical Customer Service Center (400-0365-305) directly, we will provide you with multi-channel technical services. TARGET USERS This document provides engineers with necessary data and related guidelines. Users must master the basic knowledge on communication, DSP, and ARM. This document is applicable to:  Testing engineers  Technical support engineers  Service engineers SYMBOL DESCRIPTION Icon Description Information indicated with this icon should be paid special attention to by the reader Information indicated with this icon is the explanation on the formal text for the readers to comprehend the text better [X-X] It means special noun definition is provided here Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual III Hanshow Copyright Reserved © Zhejiang Hanshow Technology Co., Ltd. EXPLANATION OF TERMS Term Expanded form Description LAN Local Area Network Local Area Network LCD Liquid Crystal Display Liquid Crystal Display RF Radio Frequency Radio Frequency RS232 EIA-RS-232 EIA-RS-232 USB Universal Serial Bus Universal Serial Bus Wi-Fi Wireless Fidelity Wireless Fidelity Table of Contents IV Hanshow Copyright Reserved © Zhejiang Hanshow Technology Co., Ltd. Table of Contents STATEMENT ................................................................................................................................ I ABOUT THE DOCUMENT .......................................................................................................... II TARGET USERS ......................................................................................................................... II SYMBOL DESCRIPTION ............................................................................................................ II EXPLANATION OF TERMS ....................................................................................................... III Table of Contents ...................................................................................................................... IV 1 Overview ................................................................................................................................... 1 1.1 System structure ............................................................................................................ 1 1.2 Performance .................................................................................................................. 2 1.3 Functions ....................................................................................................................... 3 2 Hardware features .................................................................................................................... 4 2.1 Specifications ................................................................................................................. 4 2.2 Physical interfaces ......................................................................................................... 6 2.3 Nameplate ................................................................................................…

Text truncated - open the document above for the full version.

Zhejiang Hanshow Technology Co., Ltd. FCC Software Configuration Control Declaration Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Xiaochen Jia Date: 03-05-2020 Title: manager Signatureof applicant

Differences Declaration To whom concern, We company Zhejiang Hanshow Technology Co., Ltd. hereby declares: The product models HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS-AT3521, HS-AT3523, HS-AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS-AT3591, HS-AT3593 are identical in the same PCB layout, interior structure and electrical circuits, The differences are color and model name for commercial purpose. Authorized signature: Date: 2020-03-05

< Zhejiang Hanshow Technology Co., Ltd. > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: 03-05-2020 Subject; Request for Long Term Confidentiality FCC ID: 2AHB5-AT3501 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC SOFTWARE SECURITY DESCRIPTION It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xiaochen Jia Title: manager

Zhejiang Hanshow Technology Co., Ltd. Letter of Authorization Company: Zhejiang Hanshow Technology Co., Ltd. Address: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Product Name: Digital signage Model Number(s): HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS- AT3521, HS-AT3523, HS-AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS- AT3591, HS-AT3593 Product Description: Digital signage We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-03-05 Name: Xiaochen Jia Title: manager Company: Zhejiang Hanshow Technology Co., Ltd.

Test model number: HS-AT3511

名 称/Nam e： 型 号/Model： 额定值/Rating： ATTENTION 注意 RISK OF ELECTRIC SHOCK,DO NOT OPEN 有触电危险，请勿打开 CAUTION :DO NOT OPEN. NO USER-SERVICEABLE PARTS INSIDE. 警告：请勿打开外壳，设备内无服务型维修元件。 ZHEJIANG HANSHOW TECHNOLOGY CO.,LTD. BLD.33,ZHIFU CENTER,JIAXING,ZHEJIANG,P.R.CHINA 浙江汉朔电子科技有限公司 地址：浙江省嘉兴市智富中心33幢 www.hanshow.com MADE IN CHINA 中国制造 数字标牌/ DIGITAL SIGNAGE HS AT3501 12V 2.5A CMIIT ID：XXXXXXXXXX FCC ID：2AHB5-AT3501 Way： Access to the device interface----Open File Management ----Open the Regulations Query folder ----Open the“read me.txt” Way： Access to the device interface----Open File Management ----Open the Regulations Query folder ----Open the“read me.txt” Warning：

Test model number: HS-AT3511 ANT

Global United Technology Services Co., Ltd. Report No.: GTS202002000018 RF Exposure Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 9 Report No. : GTS202002000018 Applicant: Zhejiang Hanshow Technology Co., Ltd. Address of Applicant: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Manufacturer: Zhejiang Hanshow Technology Co., Ltd. Address of Manufacturer: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Factory: Dongguan AoJinKe Electronic Technology Co.,Ltd Address of Factory: 2nd Floor,Building A,No.8,Juxiang 1 Road,Qiufu Road Community,Dalang Town,Dongguan, China Equipment Under Test (EUT): Product: Digital signage Model No.: HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS-AT3521, HS-AT3523, HS- AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS-AT3591, HS-AT3593 FCC ID: 2AHB5-AT3501 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-02-24 Date of Test: 2020-02-24 to 2020-03-03 Date of Issue: 2020-03-03 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Report No.: GTS202002000018 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 9 1 Version Revision History Of Report Report No. Version Description Issue Date GTS202002000018 Rev.01 Initial report 2020-03-03 Prepared By: Date: 2020-03-03 Project Engineer Check By: Date: 2020-03-03 Reviewer Report No.: GTS202002000018 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 9 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION .......................................................................................................................................4 3.1 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 3.2 GENERAL DESCRIPTION OF 2.4G WIFI ......................................................................................................................4 3.3 GENERAL DESCRIPTION OF 5G WIFI .........................................................................................................................4 4 RF EXPOSURE EVALUATION ................................................................................................................................6 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................6 4.1.1 Limits ..............................................................................................................................................................6 4.1.2 Test Procedure ..............................................................................................................................................6 4.2 1.1.3 EUT RF EXPOSURE EVALUATION ....................................................................................................................7 Report No.: GTS202002000018 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 9 3 General Information 3.1 General Description of EUT Product Name: Digital signage Model No.: HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS-AT3521, HS-AT3523, HS-AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS-AT3591, HS-AT3593 Test Model No.: HS-AT3511 Trade Mark: N/A Remark: All above models are identical in the same PCB layout, interior structure and electrical circuits. The differences are colour and model name for commercial purpose. Serial No.: 200800005195000036 Hardware version: V04 Software version: 8171090000361 Sample Type: Mobile Portable Fix Location Power Supply: DC5V, by Adapter Adapter: INPUT: 100-240V~50/60Hz 1.0A Max OUTPUT: 12V 2.0A 3.2 General Description of 2.4G WIFI Operation Frequency: IEEE 802.11b/g/n(HT20): 2412MHz to 2462MHz IEEE 802.11n(HT40): 2422MHz to 2452MHz Channel Numbers: IEEE 802.11b/g, IEEE 802.11n HT20: 11 Channels IEEE 802.11n HT40: 7 Channels Channel Separation: 5MHz Type of Modulation: IEEE for 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE for 802.11g : OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE for 802.11n(HT20/40): OFDM (64QAM, 16QAM,QPSK,BPSK) Test Software of EUT: RF test (manufacturer declare ) Antenna Type: internal antenna with ipex connector Antenna Gain: 3.2dBi 3.3 General Description of 5G WIFI Operation Frequency: IEEE 802.11a/n/ac(20M): 5150MHz ~5250 MHz IEEE802.11n/ac(40M): 5150MHz ~5250 MHz IEEE802.11ac(80M): 5150MHz ~5250 MHz IEEE 802.11a/n/ac(20M): 5725MHz ~5850 MHz IEEE802.11n/ac(40M): 5725MHz ~5850 MHz IEEE802.11ac(80M): 5725MHz ~5850 MHz Channel Numbers: IEEE 802.11a/n/ac(20M): 5150MHz ~5250MHz/ 4 channel IEEE 802.11n/ac(40M): 5150MHz ~5250MHz/ 2 channel IEEE 802.11ac(80M): 5150MHz ~5250MHz/ 1 channel IEEE 802.11a/n/ac(20M): 5725MHz ~5850MHz/ 5 channel IEEE 802.11n/a…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20200200077E-03 Applicant: Zhejiang Hanshow Technology Co., Ltd. Address of Applicant: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Equipment Under Test (EUT): EUT Name: Digital signage Model No.: HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS-AT3521, HS-AT3523, HS- AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS-AT3591, HS-AT3593 Test Model No.: HS-AT3511 Brand Name: N/A FCC ID: 2AHB5-AT3501 Standards: 47 CFR Part 15, Subpart E KDB 789033 D02 General UNII Test Procedures New Rules v02r01 KDB 558074 D01 Meas Guidance v05r02 Date of Receipt: 2020-02-24 Date of Test: 2020-02-24 to 2020-03-03 Date of Issue: 2020-03-03 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Aaron Ma ) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200077E-03 Page:2 of 19 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200200077E-03 Rev.01 Initial report 2020-03-03 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200077E-03 Page:3 of 19 2 Test Summary Test Item Test Requirement Test method Result Non-Occupancy Period 47 CFR Part 15 Subpart E Section 15.407 (h)(2)(iv) FCC Order, ET Docket No.03-122 (FCC 06-96) N/A 1) DFS Detection Threshold 47 CFR Part 15 Subpart E Section 15.407 (h)(2) FCC Order, ET Docket No.03-122 (FCC 06-96) N/A 1) Channel Availability Check Time 47 CFR Part 15 Subpart E Section 15.407 (h)(2)(ii) FCC Order, ET Docket No.03-122 (FCC 06-96) N/A 1) Uniform Spreading 47 CFR Part 15 Subpart E Section 15.407 (h)(2) FCC Order, ET Docket No.03-122 (FCC 06-96) N/A 1) U-NII Detection Bandwidth 47 CFR Part 15 Subpart E Section 15.407 (h)(2) FCC Order, ET Docket No.03-122 (FCC 06-96) N/A 1) Channel Closing Transmission Time 47 CFR Part 15 Subpart E Section 15.407 (h)(2)(iii) FCC Order, ET Docket No.03-122 (FCC 06-96) PASS Channel Move Time 47 CFR Part 15 Subpart E Section 15.407 (h)(2)(iii) FCC Order, ET Docket No.03-122 (FCC 06-96) PASS Remark: The tested sample(s) and the sample information are provided by the client. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application. N/A 1) : The operation mode of tested sample only is client without radar detection, therefore it is not required. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200077E-03 Page:4 of 19 3 Content 1 VERSION ......................................................................................................................................................................2 2 TEST SUMMARY ........................................................................................................................................................3 3 CONTENT .....................................................................................................................................................................4 4 TEST REQUIREMENT ...............................................................................................................................................5 4.1 TEST SETUP ..........................................................................................................................................................5 4.1.1 For Conducted test setup .............................................................................................................................5 4.1.2 Slave and Client device(EUT) block diagram of Test setup ....................................................................5 4.1.3 Mast device(EUT) block diagram of Test setup ........................................................................................5 4.2 TEST ENVIRONMENT .............................................................................................................................................6 4.3 TEST CONDITION ...................................................................................................................................................6 4.3.1 Radar test waveforms ...................................................................................................................................6 4.3.2 Technical requirement ..................................................................................................................................8 5 GENERAL INFORMATION .......................................................................................................................................9 5.1 CLIENT INFORMATION ...........................................................................................................................................9 5.2 GENERAL DESCRIPTION OF EUT .........................................................................................................................9 5.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ...............................................................................9 5.4 DESCRIPTION OF SUPPORT UNITS ......................…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202002000018F02 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 203 Test Report Applicant: Zhejiang Hanshow Technology Co., Ltd. Address of Applicant: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Manufacturer: Zhejiang Hanshow Technology Co., Ltd. Address of Manufacturer: Bld. 33, No. 966 xiuyuan Rd., BeiKeJian Innovation Park, XiuZhou District, Jiaxing, Zhejiang, China Factory: Dongguan AoJinKe Electronic Technology Co.,Ltd Address of Factory: 2nd Floor,Building A,No.8,Juxiang 1 Road,Qiufu Road Community,Dalang Town,Dongguan, China Equipment Under Test (EUT): EUT Name: Digital signage Model No.: HS-AT3501, HS-AT3503, HS-AT3511, HS-AT3513, HS-AT3521, HS-AT3523, HS-AT3531, HS-AT3533, HS-AT3551, HS-AT3553, HS-AT3591, HS-AT3593 FCC ID: 2AHB5-AT3501 Standards: 47 CFR Part 15, Subpart E KDB 789033 D02 General UNII Test Procedures New Rules v02r01 KDB 558074 D01 Meas Guidance v05r02 Date of Receipt: 2020-02-24 Date of Test: 2020-02-24 to 2020-03-03 Date of Issue: 2020-03-03 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Report No.: GTS202002000018F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 203 1 Version Revision History Of Report Report No. Version Description Issue Date GTS202002000018F02 Rev.01 Initial report 2020-03-03 Prepared By: Date: 2020-03-03 Project Engineer Check By: Date: 2020-03-03 Reviewer Report No.: GTS202002000018F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 203 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15 Subpart C Section 15.203 ANSI C63.10-2013 PASS AC Power Line Conducted Emission 47 CFR Part 15 Subpart E Section 15.407 (b)(6) ANSI C63.10-2013 PASS Conducted Output Power and transmit power control mechanism 47 CFR Part 15 Subpart E Section 15.407 (a)(1)(2)(4)(h)(1) ANSI C63.10-2013 PASS Emission Bandwidth 47 CFR Part 15 Subpart E Section 15.407 (a)(1)(2) ANSI C63.10-2013 PASS Peak Power Spectral Density 47 CFR Part 15 Subpart E Section 15.407 (a)(1)(2)(5) ANSI C63.10-2013 PASS Frequency stability 47 CFR Part 15 Subpart E Section 15.407 (g) ANSI C63.10-2013 PASS Operation in the absence of information to the transmit 47 CFR Part 15 Subpart E Section 15.407 (c) 47 CFR Part 15 Subpart E PASS Unwanted Emissions that fall Outside of the Restricted Bands 47 CFR Part 15 Subpart E Section 15.407 (b)(1)(2)(3)(5) ANSI C63.10-2013 PASS Unwanted Emissions in the Restricted Bands 47 CFR Part 15 Subpart E Section 15.407 (b)(6)(7)(8) ANSI C63.10-2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15 Subpart E Section 15.407 (b)(6)(7)(8) ANSI C63.10-2013 PASS Remark: The tested sample(s) and the sample information are provided by the client. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application Report No.: GTS202002000018F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 203 3 Content 1 VERSION ....................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................... 3 3 CONTENT ...................................................................................................................................................... 4 4 TEST REQUIREMENT .................................................................................................................................. 5 4.1 TEST SETUP ............................................................................................................................................ 5 4.1.1 For Conducted test setup ................................................................................................................. 5 4.1.2 For Radiated Emissions test setup ................................................................................................... 5 4.1.3 For Conducted Emissions test setup ................................................................................................ 6 4.2 TEST ENVIRONMENT ................................................................................................................................ 6 4.3 TEST CONDITION ..................................................................................................................................... 7 5 GENERAL INFORMATION ........................................................................................................................…

Text truncated - open the document above for the full version.

Test model number: HS-AT3511 Radiated Emission Conducted Emission