2AHJXUP3001Ulyte

Ulyte User Manual ProductName：Ulyte（U：you、UBTECH；lyte：light）） ProductModel：UP3001 Product Category：Pocket GimbalCamera Read Before First Use Make sure to read the following documents before using Ulyte. It is recommended to read the user manual and watch the tutorial videos on UBTECH official website ( www.ubtrobot.com ) or the Ulyte APP before using it for the first time. Please contact UBTECH or the authorized agents if you encountered any problemswhen using or maintaining your device. . OverviewI 1. About Ulyte Ulyte is a 3-axis intelligent hand-held gimbal camera that combines mobility and stability in one device. It shoots stable video at up to 4K 60fps and 12 mega pixel photos. The camera's live view is displayed on the 1.3-inch onboard touchscreen. Intelligent settings include HDR Video, Panorama, Timelapse and Slow Motion, as well as the joystick and zoom slider in the camera body, help you get the great shot. With the dual microphones and various shooting modes, you can experience high-quality sound recording and photos. By connecting Ulyte to the Ulyte APP on your smartphone via the wireless module, you can manage it remotely and experience real-time previews of HD photographs and smart video editing before sharing to social media with a single click. Note: (1) Accessories (not provided) such as an external tripod and extension rod can be inserted into the 1/4-inch thread hole. (2) When capturing videos, avoid blocking the microphone for improved audio quality. 2. Activating Ulyte When using the device for the first time, activation is required through Ulyte APP on your smartphone. (1) Press and hold the Power button to power onthe device; (2) Launch the Ulyte APP; (3) To activate Ulyte, go to the home screen and choose 'Connect.' Then follow the on-screen instructions. Note: Do not touch the gimbal when it is powering on. Otherwise, the performance may be affected. . Preparation Before UseII (1) Charging Choose the provided USB-C cable to connect Ulyte USB-C jack for charging. For charging, a 5V/2A adapter is recommended (not provided). (2) Install the Micro SD card A UHS-I Speed Grade 3 rating microSD card (not provided) is required due to the fast read and write speed necessary for high-resolution video data. It can support max 256GB SDHC. As shown below, insert the microSD card into the microSD card slot . . OperationIII (1) Power/Record Button Power On & Off Operation Descriptions Power on Press and hold the button for 2 seconds Power off Press and hold the button for 3 seconds Shutter/Record Record Mode Operation Descriptions Photo Take photos Press once Video Start recording Press once Finish recording(under recording） Press once (2) Gimbal Joystick Operation Descriptions Push up Turn the lens up Push down Turn the lens down Turn to left Turn the lens to left Turn to right Turn the lens to right Turn to upper left Turn the lens to upper left Turn to upper right Turn the lens to upper right Turn to lower left Turn the lens to lower left Turn to lower right Turn the lens to lower right Note: The rotation direction of the lens mentioned above shall be under the condition that the lens is in the forward direction. (3) Zoom Slider Operation Descriptions Turn up To increase focal length Turn down To reduce focal length Note: the maximum focal length is 3 times and the minimum focal length is 1 times. (4) Touchscreen Camera View 1. Re-center: to re-center the gimbal; 2. Flip: switch the camera between facing forward and backward; Swipe Left Swipe left on the touchscreen to enter the settings of the shooting mode; Swipe up or down to select a shooting mode; Swipe Right Swipe right on the touchscreen to enter the media library; Swipe up or down to scroll through photos and videos, and delete or save them; Swipe Up Swipe up on the touchscreen to enter the settings of shooting parameters; Set parameters such as countdown, continuous shooting, active track, exposure, white balance, resolution, and frame rate; Swipe Down Swipe down on the touchscreen to enter the menu, where you can swipe left or right and click the icon to enter the settings; 1. G    2. W 3. Fu 4.SD 5. Se 6. K 6.1 G 6.2 S 6.3 (Uly hand 6.4 A 6.5 cert a 6.6 L Gimbal Mode Follow: the vertically af Tilt Locked: axis rotates FPV: the p a Wi-fi: enable o ull-Screen Se D Card: displa ettings: displa Key Tone: tap Gimbal Sensi Fast Follo Slow Foll Speed of Joys Calibration o yte should be d); Anti-Flicker: Automatic S ain period of Language: se tilt and pan fter reaching t : the tilt axis vertically afte an, tilt, and ro or disable Wi- etting: set full ay the used c ay mores sett to turn the ke itivity: Select ow: the gimba low: the gimb stick: select th of Gimbal:re e placed on a select an anti Shutdown: se time, it will s t the display n axes of th the limit; of the gimba er reaching th oll axes follow -Fi and check l-screen or let apacity and to tings as show ey tone on an t the sensitivi al responds fa bal responds he 3 speeds o educedrift cau a flat and st i-flicker frequ et the automa shut down au language of t e gimbal fol l is locked, an he limit; w; k the Wi-Fi co tterbox displa otal capacity wn below; nd off; ity of Follow faster and mov slower, but th of joystick to used by near able surface uency accord atic shutdow utomatically; the Ulyte; llow the han nd the pan ax onnecting QR ay; of microSD ves abruptly; he movement control the m rby magnetic during calib ding to local r wn duration. I ndle, and the xis follows th R code. card, and form t is smoother; movement; c interference bration and c regulations; If Ulyte is n e roll axis ro he handle. The mat the SD c ; e or human cannot be hel not used with otates e roll ard; error ld by hin a 6.7 More: view the firmware information of Ulyte and reset system parameters. (5) Status LED Status LED Descriptions Blinks green slowly Charging Solid green Charging completed Blinks red Battery level is low IV. APP Installation Before using the device, download and instal…

Text truncated - open the document above for the full version.

UBTECH ROBOTICS CORP LTD ADD: 16th and 22nd Floor, Block C1, Nanshan I Park,No.1001 Xueyuan Road, Nanshan District, Shenzhen City,China TEL: 0755-83474428 FAX: 0755-83474438 E-mail: [email protected] Date: 2022-2-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, UBTECH ROBOTICS CORP LTD, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product description: Ulyte, FCC ID: 2AHJXUP3001,Model: UP3001) The chipset AP6256 supports Bluetooth,2.4G Wi-Fi and 5G Wi-Fi, But for this device, Bluetooth mode was disable by software. Sincerely, Signature: Wayne Cheng Manager

FEDERAL COMMUNICATIONS COMMISSION QA-FR-171-A UBTECH ROBOTICS CORP LTD ADD: 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen City, China TEL: 0755-83474428 FAX: 0755-83474438 E-mail: [email protected] FCC Confidential Authorization Date: 2022-2-17 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AHJXUP3001 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (UBTECH ROBOTICS CORP LTD) hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Wayne Cheng Manager Device Security Declaration

QA-FR-170-B UBTECH ROBOTICS CORP LTD ADD: 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen City, China TEL: 0755-83474428 FAX: 0755-83474438 E-mail: [email protected] FCC Authorization Date:2022-2-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , UBTECH ROBOTICS CORP LTD, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Wayne Cheng Manager

UBTECH ROBOTICS CORP LTD ADD: 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen City, China TEL: 0755-83474428 FAX: 0755-83474438 E-mail: [email protected] Date: 2022-2-17 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Declaration Subject: FCC ID: 2AHJXUP3001 declaration of frequency bands restriction Dear Sir or Madam: We, UBTECH ROBOTICS CORP LTD, hereby declare that our product Ulyte, Model Number: UP3001 have the ability to work in 2.4G and 5G 4 frequency bands: 5150MHz~5250MHz,5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5850MHz. For the purpose of marketing, the frequency of the product sold in U.S. are programmed and locked to work only in 5150~5250MHz,5725 MHz~5850 MHz, The other frequency bands 5250MHz~5350MHz, 5470MHz~5725MHz are disabled by firmware in factory. The end user or any other parties cannot have the capability to activate the other frequency bands. Please contact me if you have any question. Signature: Wayne Cheng Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

SAR TEST REPORT Applicant: UBTECH ROBOTICS CORP LTD Address: 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen City, P.R.CHINA FCC ID: 2AHJXUP3001 Product Name: Ulyte Model Number: UP3001 Standards: 47 CFR Part 2(2.1093) The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR21120032-SA Date Of Issue: 2022-03-05 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR21120032-SA Page 2 of 48 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 10g SAR (W/kg) Limits (W/kg) Handheld (Gap 0mm) WLAN 2.4G 0.33 4.0 WLAN 5.2G 0.26 WLAN 5.8G 0.71 Maximum Simultaneous Transmission SAR Items Handheld (Gap 0mm) Limits Sum SAR(W/kg) N/A 4.0 EUT Received Date: 2021/01/23 Tested Date: 2022/01/30 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR21120032-SA Page 3 of 48 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21120032-SA Page 4 of 48 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 TEST FACILITY .......................................................................................................................................... 3 DECLARATIONS .......................................................................................................................................... 3 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 7 1.3 SAR LIMTS ........................................................................................................................................... 8 2. SAR MEASUREMENT SYSTEM ............................................................................................ 9 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 15 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 16 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 17 4.1 LIQUID VERIFICATION ...................................................................................................................... 17 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 19 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 20 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 23 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 23 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 24 5.3 EAR/TILT POSITION ........................................................................................................................... 24 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 25 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 26 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 27 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 28 6.1 TEST PROCEDURE .............................................................................................................................. 28 6.3 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 28 6.4 TEST RESULTS: .................................................................................................................................. 28 7. Standalone SAR test exclusion considerations ....................................................................... 30 7.1 ANTENNA DISTANCE TO EDGE ..................................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: UBTECH ROBOTICS CORP LTD Address: 16th and 22nd Floor, Block C1, Nanshan I Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen City, P.R.CHINA FCC ID: 2AHJXUP3001 Product Name: Ulyte Model Number: UP3001 Standard(s): 47 CFR Part 15, Subpart E(15.407) ANSI C63.10-2013 KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR21120032-00B Date Of Issue: 2022-02-16 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR21120032-00B Page 2 of 68 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21120032-00B Page 3 of 68 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 3.2.1 Applicable Standard ..................................................................................................................................... 15 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ............................................................................................................................................. 17 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 17 3.3 EMISSION BANDWIDTH: .................................................................................................................... 19 3.3.1 Applicable Standard ..................................................................................................................................... 19 3.3.2 EUT Setup.................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View