2AHKO-CRPDeeper Wireless Sonar

EN 1 EN 2 EN 3 EN 4 SAFE USAGE AND REGULATIONS IMPORTANT INFORMATION! PRÉCAUTIONS D’EMPLOI ET RÉGLEMENTATION INFORMATIONS IMPORTANTES! EN • FR GENERAL USAGE Deeper is a sonar-based device which purpose is to locate fish. It is not a stand-alone device and requires a smartphone, tablet or other compatible device in order to be used. The following safety and usage rules must be followed: ALWAYS use a sufficiently strong fishing line and pole when casting the gadget. ALWAYS ensure the main seal is in good con- dition and the gadget is closed properly before immersing the gadget into water. DO NOT use the device in any other way than its intended usage as described in the instruction manual. DO NOT attempt to disassemble, modify or carry out any servicing of the gadget or its accessories, other than the simple maintenance procedures as described for its intended use. DO NOT abuse, step on, kick, puncture, drop or throw the gadget; with the exception of when it is being dropped or thrown into sufficiently deep water. DO NOT expose the gadget to a mechanical load, vibrations or shock that may exceed those occurring during normal intended use. DO NOT use the gadget if there is any significant physical damage evident, if the main seal is worn or if it does not close properly, resulting in its water-tightness being compromised. DO NOT use the gadget if there is any rattling or water flowing sounds emitting from within it when shaken. DO NOT submerse the gadget underwater. DO NOT cast the gadget in any areas where it may result in injury to other people, or damage to property or to the gadget itself, especially indoors. DO NOT rely on the depth readings for avoiding becoming grounded when navigating a boat. DO NOT rely on the Map feature of the application for avoiding collision when navigating a boat or for getting directions when driving a car. ALWAYS keep the Deeper product and its parts and accessories, including packaging, out of children’s reach. DO NOT let children use or play with the device. Only properly qualified and trained personnel at Deeper, UAB may perform repair and service procedures. Do not at- tempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses a significant electrical hazard. BATTERY INFORMATION This gadget contains a Li-Ion battery, which can be charged and discharged for up to 300 cycles, depending on the conditions in which the gadget is used. In order to increase the battery life, do not expose it to extreme temperatures. At freezing temperatures, the capacity of the battery is significantly limited. Even when you do not use your Deeper for prolonged periods of time, recharge it every 6 months. Eventually, the battery will wear out and will need replacing, a procedure which can be carried out by returning your Deeper for service (please refer to Warranty section). The battery can be dangerous if handled incorrectly, so the following safety rules must be followed: DO NOT attempt to remove or replace the battery. DO NOT expose the gadget to temperatures outside the range of -20°C to 40°C / -4°F to 104°F. DO NOT leave the gadget in the interior of a parked car in hot weather. DO NOT leave the gadget exposed to direct sunlight for prolonged periods of time when not immersed in water. DO NOT dispose the battery in a fire. DO NOT use the gadget if there is any non-water leakage or fumes emitting from it. In this situation, be careful to ensure any leakage does not make contact with your skin or eyes. If this happens, wash the contact area thoroughly with cold water and consult with your doctor. CHARGING Do not leave the fully charged battery connected to the charger for prolonged periods of time, as this may reduce the lifetime of the battery. The manufacturer cannot be held responsible in any event when a third-party charger is misused. DO NOT leave the device charging unattended. DO NOT cover the charger or the device during the charging procedure as overheating may occur. DO NOT use the charger if there is any significant physical damage evident. DO NOT use the charger if there is any smoke or suspicious smell emitting from it. If this occurs during charging, immedi- ately but carefully disconnect the charger both from the mains and from the device. ALWAYS inspect the charger for damage before use. ALWAYS ensure the gadget is dry, and that there is no water on the USB connector or trapped inside before charging it. Ensure that the charger complies with Clause 2.5 in IEC60950 - 1/ EN60950 - 1/UL60950 - 1 CSA/UL 62368-1/ IEC 62368-1/ EN 62368-1 and has been tested and approved according to national or local standards. WEE The WEE symbol on the product or on its packaging indicates that the product must not be disposed of with another household refuse. It is your responsibility to ensure that the product is properly disposed of, preferably leading to recycling of the product or its parts. For further information on how to dispose the product properly, contact your local waste disposal service, local authorities or the product retailer. WI-FI REGULATION GUIDE In some situations, or environments, the use of Wi-Fi wireless technology might be restricted by the proprietor of the building or responsible representatives of the organization, for example on-board of airplanes, in hospitals or in any other environment where the risk of interference with other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies to the use in a specific organization or environment, you are encouraged to ask for au- thorization to use Wi-Fi wireless technology prior to switching it on. Consult your physician or the manufacturer of personal medical devices (pacemakers, hearing aids, etc.) regarding any restrictions on the use of Wi-Fi wireless technology. LEGAL INFORMATION Deeper is a trademark of Deeper, UAB. This trademark may not be used without the permission of Deeper, UAB. Repro- duction i…

Text truncated - open the document above for the full version.

MAPS.FISHDEEPER.COM USA +1 904 204 4808 UK +44 3307 771477 CA +16 13416 7904 AU +61 27908 4082 ZA +27 87550 9112 120m/394ft

Model difference declaration To: Kiwa Telefication Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Hereby we, Deeper UAB declare that our products Deeper CHIRP+2 (DP4H10S10), Deeper CHIRP 2 (DP4H20S10) and Deeper ECHO+ (DP4H30S20) have these differences: Trade mark Model number Differences from basic model Deeper CHIRP+2 DP4H10S10 Basic model with GNSS module and sonar with CHIRP technology Deeper CHIRP 2 DP4H20S10 No PCB layout changes. GNSS module is not soldered during manufacturing process. Deeper ECHO+ DP4H30S20 No PCB layout changes. Sonar CHIRP technology disabled by software Vilnius, 2021-07-20 Mindaugas Špelveris, CTO __________________ Place, date of issue __________________________________ Name, Function, signature

Page 1 of 3 External Photo Module Product name : Chirp+ 2 FCC ID : 2AHKO-CRP IC ID : 21307-CRP Test report No. 201200772 Test report No. 201200772 Page 1 of 3 Table of Contents 1 External Photos ........................................................................................................................................ 2 1.1 Front/3D View ....................................................................................................................................... 2 1.2 Back view............................................................................................................................................... 2 1.3 Bottom view .......................................................................................................................................... 3 Test report No. 201200772 Page 2 of 3 1 External Photos 1.1 Front/3D View 1.2 Back view Test report No. 201200772 Page 3 of 3 1.3 Bottom view

Model: DP4H30S20 Bat. 3.8V 1300mAh FCC ID: 2AHKO-CRP IC ID: 21307-CRP MSIP-CMM- DP0-DP4H10S10

Page 1 of 2 Internal Photo Module Product name : Chirp+ 2 FCC ID : 2AHKO-CRP IC ID : 21307-CRP Test report No. 201200772 Test report No. 201200772 Page 1 of 2 Table of Contents 1 Internal Photos ........................................................................................................................................ 2 1.1 Top PCB view ......................................................................................................................................... 2 1.2 Internal view with label information ..................................................................................................... 2 Test report No. 201200772 Page 2 of 2 1 Internal Photos 1.1 Top PCB view 1.2 Internal view with label information

Page 1 of 5 FCC SAR Exclusion Report Product name : Chirp 2/Chirp+ 2/ECHO+ Applicant : Deeper, UAB FCC ID : 2AHKO-CRP ISED ID : 21307-CRP Test report No. : 201200772 002 Ver 1.0 Report number: 201200772 002 Ver 1.0 Page 1 of 5 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Kiwa Telefication BV Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 Report number: 201200772 002 Ver 1.0 Page 2 of 5 Revision History Version Date Remarks By v1.00 17-05-2021 Release version PvW Report number: 201200772 002 Ver 1.0 Page 3 of 5 Table of Contents Revision History .............................................................................................................................................. 2 1 General Description ................................................................................................................................. 4 1.1 Applicant ................................................................................................................................................ 4 1.2 Manufacturer ........................................................................................................................................ 4 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 4 1.4 SAR Measurement Evaluation ............................................................................................................... 5 1.4.1 Maximum Output Power ................................................................................................................... 5 1.4.2 SAR Testing Exclusions, Mobile use ................................................................................................... 5 1.5 Summary ................................................................................................................................................ 5 Report number: 201200772 002 Ver 1.0 Page 4 of 5 1 General Description 1.1 Applicant Client name: Deeper, UAB Address: Antakalnio g. 17; 10312 Vilnius, Lithuania Telephone: -- E-mail: [email protected] Contact name: Mindaugas Špelveris 1.2 Manufacturer Manufacturer name: Deeper, UAB Address: Antakalnio str. Vilnius, Lithuania Telephone: +37066261439 E-mail: [email protected] Contact name: Mindaugas Špelveris 1.3 Tested Equipment Under Test (EUT) Product name: Chirp+ 2 Brand name: Deeper Product type: Wireless sonar with GNSS and temperature sensor Model(s): Chirp+ 2 (GNSS and temperature sensor) Chirp+ 2 (GNSS, no temperature sensor) Chirp 2 (no GNSS, only temperature sensor) Chirp 2 (no GNSS, no temperature sensor) ECHO+ FCC ID: 2AHKO-CRP ISED ID 21307-CRP Software version: -- Hardware version: -- Report number: 201200772 002 Ver 1.0 Page 5 of 5 1.4 SAR Measurement Evaluation 1.4.1 Maximum Output Power The maximum conducted output power as shown below is taken from Telefication test report no. 201200772 001. 802.11b has the highest output power of the available technologies. Mode Output power (dBm) 802.11b 23.9 1.4.2 SAR Testing Exclusions, Mobile use Calculation method of RF Safety Distance: =10∗ ( ) 4 Where: PD = Power Density in / Pout = Output power in mW R = Distance between observation point and centre of the radiator in cm Antenna Technology 802.11b/g/n Antenna type Spiral monopole Antenna gain -2.3 dBi Note: antenna gain is declared by the manufacturer. Calculation results Technology Frequency (MHz) Max power EIRP (mW) Distance (cm) Power density ( / ) Limit ( / ) 802.11b 2412 114.5 20 2.28 10 1.5 Summary Since the SAR testing for all device orientations apply SAR test exclusion per KDB 447498, SAR testing for this device is not required.

FCC and IC Test report for parts 15.107, 15.109, 15.207, 15.209, 15.247 RSS-247, RSS-Gen Product name : Chirp 2/Chirp+ 2/ECHO+ Applicant : Deeper, UAB FCC ID : 2AHKO-CRP IC ID : 21307-CRP Test report No. : 201200772 001 Ver 1.0 Report number: 201200772 001 Ver 1.0 Page 1 of 36 Laboratory information Accreditation Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Telefication is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Telefication is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. Telefication is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Telefication Netherlands. Testing Location Test Site Kiwa Telefication BV Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 Report number: 201200772 001 Ver 1.0 Page 2 of 36 Revision History Version Date Remarks By v0.50 17-05-2021 First draft PvW v1.00 16-07-2021 Initial release PvW Report number: 201200772 001 Ver 1.0 Page 3 of 36 Table of Contents Revision History .............................................................................................................................................. 2 Summary of Test results .................................................................................................................................. 5 1 General Description ................................................................................................................................. 6 1.1 Applicant ................................................................................................................................................ 6 1.2 Manufacturer ........................................................................................................................................ 6 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 6 1.4 Product specifications of Equipment under test ................................................................................... 7 1.5 Environmental conditions...................................................................................................................... 7 1.6 Measurement standards ....................................................................................................................... 7 1.7 Applicable standards ............................................................................................................................. 7 1.8 Observation and remarks ...................................................................................................................... 7 1.9 Conclusions ............................................................................................................................................ 8 2 Test configuration of the Equipment Under Test ..................................................................................... 9 2.1 Test mode .............................................................................................................................................. 9 2.2 Test setups ............................................................................................................................................. 9 2.3 Equipment used in the test configuration ........................................................................................... 11 2.4 Sample calculations ............................................................................................................................. 11 3 Test results ............................................................................................................................................ 12 3.1 Radiated spurious emissions ............................................................................................................... 12 3.1.1 Limit ................................................................................................................................................. 12 3.1.2 Measurement instruments ............................................................................................................. 12 3.1.3 Test setup ........................................................................................................................................ 12 3.1.4 Test procedure ................................................................................................................................ 12 3.1.5 Measurement Uncertainty .............................................................................................................. 12 3.1.6 Peaks of the radiated spurious emissions measurement ............................................................... 13 3.1.7 Plots of the Radiated Spurious Emissions ....................................................................................... 14 3.2 6dB bandwidth Measurement ............................................................................................................. 24 3.2.1 Limit ................................…

Text truncated - open the document above for the full version.

Page 1 of 3 Test Setup Photo Module Product name : Chirp+ 2 FCC ID : 2AHKO-CRP IC ID : 21307-CRP Test report No. 201200772 Test report No. 201200772 Page 1 of 3 Contents 1 Test Setup Photos .................................................................................................................................... 2 1.1 Radiated emissions measurement 9 kHz – 30 MHz .............................................................................. 2 1.2 Radiated emissions measurement 30 – 1000 MHz ............................................................................... 2 1.3 Radiated emissions measurement 1 – 18 GHz ...................................................................................... 3 1.4 Radiated emissions measurement 18 – 26 GHz .................................................................................... 3 Test report No. 201200772 Page 2 of 3 1 Test Setup Photos 1.1 Radiated emissions measurement 9 kHz – 30 MHz 1.2 Radiated emissions measurement 30 – 1000 MHz Test report No. 201200772 Page 3 of 3 1.3 Radiated emissions measurement 1 – 18 GHz 1.4 Radiated emissions measurement 18 – 26 GHz