2AHVH-WR1819MRouter

2 鼠 g Smart TV Printer Computer Game console Tablet Smartphone SSID:­ Password:一 )) ） （ « OR WiFi (2.4 GHz or 5 GHz) 4 Your deviceswi11detect the WR1819M network... R」45 (LANl, LAN2 or LAN3) 。2 6CA3 9 5MR00 三 r u 。 ry 。 u 0t e y one at m . vIC . Vig TudeNa 5 ~ devices' Wi-Fi/network selection settings. 岔从1800RM_2.4g_3CA620 � ALFANetwo『klnc. '9-a 192.168.10.x '9a ALFA Netwo『klnc.2.4G 4 · ·一 Morew; Fl settmgs ＠ 叶 0 2.21 PM 12/27/2022 。 6 f:；e1 c ;;: e RM_5g_ XXXXXX ” or "AX1800RM_2.4g_XXXXXX" WiFi network. The router will automati­ cally make the connection between your box and your computer. 7Thenetworkwi|| askyoufora password. Enter 1 2 3 4 5 6 7 8. You now have Internet access! You can also connect your router to your computer using a R」45cable instead of WiFi. In this case, your computer will be directly connected to the Internet, without using the wireless network provided by the router. If you are configuring the router wirelessly from a PC/laptop/tablet, use the WiFi name (SSID) and WiFi password information on the bottom label of the AX1800RM. If you are configuring the AX1800RM from the PC with an Ethernet cable, plug one end into the LAN port 1 ~ 3 and another into the Ethernet port on your computer. 5 WiFiMesh Set up 归勹凹 三 ＼ ｀ WiFiMesh is a scalable solution that allows you to easily increase the coverage and eliminate any weak spots in your wireless network. IMPORTANT: Y our WR1819M can be set up as a controller or agent in a WiFi mesh network. A controller must be connected with an Ethernet cable to your cable/DSL or fiber modem. The WR1819M agent must be next to the WR1819M controller during the setup process. 9 Pair 2 WR1819M Mesh controller and agent 1. First, set up the controller; the WR1819M Mesh controller is the one that connects to the Internet cable/DSL or fiber modem with an Ethernet cable. Press the WPS Mesh button for 6 seconds, then release. The 2.4G and SG LEDs start blinking. 0 [r;心五五刷回 WPS RESET LANl LAN 2 LAN3 WAN 1_ 2 V_ DC 令丑 0 0 O O O POWER WAN LAN3 LAN2 LAN1 }念3空 2. Second, set up the agent: On the WR1819M agent press the WPS Mesh button for 6 secon ds, then release. During pairing, the 2.4G and SG LEDs will be blinking. 吓 0[; 心五证-I回 WPS RESET LANl LAN 2 LAN3 WAN 1. 2 V DC 令气兮令 0 0 O O O POWER WAN LAN3 LAN2 LAN1 熹． SG 熹心 10 3. Finish pairing After successful pairing, the WR1819M agent's Power LED will be blinking, and the WAN, 2.4G, and SG LED will be solid. Then you can unplug the power adapter and move to the WR1819M agent to the wor king range to extend the WiFi signal. 、“ 女9.- 000000 POWER WAN LAN3 LAN2 LAN1 2.4G 5G IMPORTANT: If the WR1819M agent is out of working range with the WR1819M controller. The power LED will be solid, and the 2.4G and SG LEDs will be blinking. Moving the WR1819M agent closer to the WR1819M controller may resolve this issue. 11 U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

US AGENT-LE订EROF ATTESTATION US Agent: Company Name: FCC US Agent, LLCH FRN: 0033402884 Contact Name: Tim Paynee Address: 3722 Illinois Avenue, Saint Charles,IL, 60174, USA Telephone No: :708-571-3148 Fax No: Email: [email protected] TO: Office of Engineering Technolog y Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 C5266091_x23_Ed.1 This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the (Shen Zhen MTC Co., LTD) noted beiow for all future FCC certification/registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause § 2.911 Application requirements. Applicant Company name: Grantee code: F CC ID: Contact Name: Address: T elephone No: Fax No: Email: Shen Zhen MTC Co., LTD 2AHVH 2AHVH-WR1819M F eng Pu M TC Industry Park, 1st Lilang Road, Xialilang community, Nanwan street, Longgang district, Shenzhen, China 86-755-32901695 I [email protected] The Applicant acknowledge the acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. —-－ -—-———— 薯 —- Appl:cant's Name: Shen Zhen MTC Co., LTD Title: WLAN Manager US Agent's l'Jarr.e: FCC U S Agent, LLCH Title: Manager Signature f叫仰 Signature 1/1 FRN: 0025449661

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shen Zhen MTC Co., LTD Grantee code: 2AHVH FCC ID: 2AHVH-WR1819M Contact Name: Feng Pu Address: MTC Industry Park, 1st Lilang Road, Xialilang community, Nanwan street, Longgang district, Shenzhen，China Telephone No: 86-755-32901695 Fax No: Email: [email protected] i. [Shen Zhen MTC Co., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shen Zhen MTC Co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shen Zhen MTC Co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2023/09/5 Applicant’s Name: Shen Zhen MTC Co., LTD Title: WLAN Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Page 1 of 4 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 4 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 4 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 4 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Label Location

Page 1 of 3 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT INTERNAL PHOTOS EUT Photo EUT Photo 5G Wi-Fi Antenna 1 2.4G Wi-Fi Antenna 1 2.4G Wi-Fi Antenna 0 5G Wi-Fi Antenna 0 Page 2 of 3 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AHVH-WR1819M Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 1 of 14 Report No.: 220725611RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.1 FCC RF EXPOSURE EVALUATION REPORT Product Name: Router Trade Mark: AMTC, Boulanger, STRONG, essentiel b Model No.: WR1819M Add. Model No.: WR****M（* from 0 to 9) Report Number: 220725611RFC-4 Test Standards: FCC 47 CFR Part 1 Subpart I FCC ID: 2AHVH-WR1819M Test Result: PASS Date of Issue: September 7, 2023 Prepared for: Shen Zhen MTC Co., LTD MTC Industry Park, 1st Lilang Road, Xialilang community, Nanwan street, Longgang district, Shenzhen，China Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Kevin Liang Approved by: Date: September 7, 2023 Assistant Manager Page 2 of 14 Report No.: 220725611RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.1 Version Version No. Date Description V1.0 September 7, 2023 Original Page 3 of 14 Report No.: 220725611RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 7 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 8 1.6 TEST LOCATION ................................................................................................................................................. 8 1.7 TEST FACILITY ................................................................................................................................................... 8 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 8 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 8 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 8 2. EQUIPMENT LIST .................................................................................................................................................... 9 3. MPE EVALUATION ................................................................................................................................................... 9 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 9 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 9 3.2.1 LIMITS ................................................................................................................................................... 9 3.2.2 TEST PROCEDURE ................................................................................................................................. 9 3.3 MPE CALCULATION METHOD ............................................................................................................................. 9 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 10 3.4.1 FOR WLAN ......................................................................................................................................... 10 3.4.2 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 12 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 14 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 14 Page 4 of 14 Report No.: 220725611RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART1-V1.1 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Shen Zhen MTC Co., LTD Address of Applicant: MTC Industry Park, 1st Lilang Road, Xialilang community, Nanwan street, Longgang district, Shenzhen，China Manufacturer: Shen Zhen MTC Co.,…

Text truncated - open the document above for the full version.

1henzhen Feiyuxin Electronics Co.,Ltd Specification For Approval Customer ： MTC Part name：IPEX-2.4G-5dBi-White Knife Type Rubber Antenna-137 Gray-L220MM Part No：3.08.0102000016 Customer Part No：304WIFI1292 Manufacturer recognition SalesDrafterscheckApprover MeiLiLizhxiaoZhouxihuaLihe Thank you for giving us the chance to approve samples. If you agree to pass it, please kindly send it back to us. henzhen Feiyuxin Electronics Co.,Ltd Address: No.76, Baotong South Road, Xikeng Industrial Zone, Henggang Town, Longgang District, Shenzhen, China Telephone：0755-89737230 Fax：0755-89737181 http://www.fyxdz.com 2henzhenFeiyuxinElectronicsCo.,Ltd Catalog 1.Productdimensiondrawing...................................3 2.Productappearance..........................................4 3.Antennaperformanceparameters ..............................4 4.Cablespecification........................................4-5 5.environmentaltest.........................................5-7 6.Antennaperformancetest....................................8 Modificationrecord editiondatengineerModification A02021.1.20New 3henzhenFeiyuxinElectronicsCo.,Ltd 1. Productdimensiondrawing 4henzhenFeiyuxinElectronicsCo.,Ltd 2. Productappearance SizeΦ13*196MMFixedmodemagnetic Weight/ConnectorIPEX colour WHITECable RG137-220mm 3.Antennaperformanceparameters ProjectCharacterUnit Frequencydomain 2400-2500MHz Outputimpedance50Ω SWR Comparethewaveform —— Gain5dBi PolarizationmodeVerticalpolarization RadiationdirectionAll-around Maxinputpower 5W Operatingtemperature-40～+70°C Storagetemperature -45～+75°C 4. Cablespecification RG137 Structureparameter MaterialScienceDiameter（mm） 1.Innerconductor Barecopperwire7/0.102±0.02 2.Insulator FEPΦ0.86±0.05 3.Outerconductor Coppercladaluminum 5*16/0.05mm 4.SheathFEP 1.37±0.05 Electricperformanceparameters Capacitance(pF/m)95.8PF/M Impedance(ohm) 50±3 Rate(%)69% Bendingradius（mm）7MM Maximumworkingvoltage(VMS)1000 Maximumoperatingfrequency（MHz）6000 Operatingtemperaturerange(°C)-40至+80 5henzhenFeiyuxinElectronicsCo.,Ltd Attenuation （MHz）(≯dB/m) 100 0.47 400 0.93 1000 1.48 2000 2.15 3000 2.65 4000 3.56 50004.10 6000 4.75 5. environmentaltest Environmentaltestreport 5.1Highandlowtemperatureandhumiditytest PartNoProduct Specifications TestitemsHightemperature,lowtemperatureandconstanthumiditytest Testing equipment Constanttemperatureandhumidity testchamber numberof test;quantity oftest Inspection standard Thecoatingonthemetalsurfacedoesnotfalloff,crack,wrinkleand otherdefects;Nodiscoloration,cracks,deformation,degummingand otherphenomenaareallowedonthenon-metallicparts. TestnameTestitemsrequirementtestmethodResult judgment High temperature test Temperature(°C) Testsample temperaturetime (H) Testduration(H) recoverytime(H) 85±3 1 96 2 Testprocedure: a)Putthetestpieceinto thetestbox,andthen adjustthetemperatureof thehightemperaturebox to85°C±3°C,and monitorthetime. b)Afterthetest,they wereplacedatroom temperaturefor2hours forroutineinspection. OK low temperature test temperature（°C） Temperaturetimeof testsample（h） Testduration（h） recoverytime（h） -40±3 1 96 2 Teststeps: A)Putthetestedparts intothetestchamber,and thensetthetemperature ofthecryogenicchamber to-40°C±3°Cfor monitoringtime. B)Placeatroom temperaturefor2hours afterthetestforroutine OK 6henzhenFeiyuxinElectronicsCo.,Ltd inspection. steady-state dampheat test temperature（°C） relativehumidity （%） Testduration（h） recoverytime（h） +85±2 85 96 2 A)Putthetestedparts intothetestchamber, thensetthetemperature ofthechamberto+85°C ±2°Candthehumidity to85%,andmonitorthe time. B)Placeatroom temperaturefor2hours afterthetestforroutine inspection. OK inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 5.2Freedroptest P/NCommodity specification testitemFreedroptest checkout equipment Onemeterhightabletopnumberof test inspection standard 1.Theproductfallsataheightof1meterwithoutfallingoff,cracking orotherdefects,andwithoutappearancedeformation. Nameof test testitemaskfortestmethodresultsof evaluation Freedrop test Dropheight: 1000mm It'sgoing tofall2 times Teststeps: A)Dropthetestedpartata heightof1000mmandconduct routineinspectionafter thetest. OK inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 6.3saltspraytest P/NCommodity specification testitemsaltspraytest checkout equipment Fogtesternumberoftest inspection standard 1.Themetalsurfacecoatingdoesnotfalloff;Appearancewithoutrust, corrosion,oxidationandotheradversephenomena. Nameof test testitemaskfortestmethodresultsof evaluation saltspray test 1.NaCl concentration： 2.airpressure： 40-60g/1kg 1.0±0.01kgf㎡ 6.5-7.2 A.Laboratory temperature: B.Pressuredrum OK 7henzhenFeiyuxinElectronicsCo.,Ltd 3.PHprice： 4.volumeofspray： 5.5.Saltwater testtemperature setting A.Laboratory temperature: B.Pressurebarrel temperature: 6.Testtime: 1.0-2.0ml/80c/h。 35±1°C 47±1°C 24H temperature:Test procedure: A)Modulatethesalt spraytesterto relevanttest conditions. B)Placethetested partinthesalt spraytesterfor24 hours.Afterthe test,rinsewith cleanwater, visuallyinspect theappearanceof thetestedparts, andconductroutine inspection. 6.Testtime: inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 8henzhen Feiyuxin Electronics Co.,Ltd 6. Antenna performance tes

1henzhen Feiyuxin Electronics Co.,Ltd Specification For Approval Customer ： MTC Part name：IPEX-2.4G-5dBi-White Knife Type Rubber Antenna-137 Gray-L115MM Part No：3.08.0102000015 Customer Part No： 304WIFI1291 Manufacturer recognition SalesDrafterscheckApprover MeiLiLizhxiaoZhouxihuaLihe Thank you for giving us the chance to approve samples. If you agree to pass it, please kindly send it back to us. henzhen Feiyuxin Electronics Co.,Ltd Address: No.76, Baotong South Road, Xikeng Industrial Zone, Henggang Town, Longgang District, Shenzhen, China Telephone：0755-89737230 Fax：0755-89737181 http://www.fyxdz.com 2henzhenFeiyuxinElectronicsCo.,Ltd Catalog 1.Productdimensiondrawing...................................3 2.Productappearance..........................................4 3.Antennaperformanceparameters ..............................4 4.Cablespecification........................................4-5 5.environmentaltest.........................................5-7 6.Antennaperformancetest....................................8 Modificationrecord editiondatengineerModification A02021.1.20New 3henzhenFeiyuxinElectronicsCo.,Ltd 1. Productdimensiondrawing 4henzhenFeiyuxinElectronicsCo.,Ltd 2. Productappearance SizeΦ13*196MMFixedmodemagnetic Weight/ConnectorIPEX colour WHITECable RG137-115mm 3.Antennaperformanceparameters ProjectCharacterUnit Frequencydomain 2400-2500MHz Outputimpedance50Ω SWR Comparethewaveform —— Gain5dBi PolarizationmodeVerticalpolarization RadiationdirectionAll-around Maxinputpower 5W Operatingtemperature-40～+70°C Storagetemperature -45～+75°C 4. Cablespecification RG137 Structureparameter MaterialScienceDiameter（mm） 1.Innerconductor Barecopperwire7/0.102±0.02 2.Insulator FEPΦ0.86±0.05 3.Outerconductor Coppercladaluminum 5*16/0.05mm 4.SheathFEP 1.37±0.05 Electricperformanceparameters Capacitance(pF/m)95.8PF/M Impedance(ohm) 50±3 Rate(%)69% Bendingradius（mm）7MM Maximumworkingvoltage(VMS)1000 Maximumoperatingfrequency（MHz）6000 Operatingtemperaturerange(°C)-40至+80 5henzhenFeiyuxinElectronicsCo.,Ltd Attenuation （MHz）(≯dB/m) 100 0.47 400 0.93 1000 1.48 2000 2.15 3000 2.65 4000 3.56 50004.10 6000 4.75 5. environmentaltest Environmentaltestreport 5.1Highandlowtemperatureandhumiditytest PartNoProduct Specifications TestitemsHightemperature,lowtemperatureandconstanthumiditytest Testing equipment Constanttemperatureandhumidity testchamber numberof test;quantity oftest Inspection standard Thecoatingonthemetalsurfacedoesnotfalloff,crack,wrinkleand otherdefects;Nodiscoloration,cracks,deformation,degummingand otherphenomenaareallowedonthenon-metallicparts. TestnameTestitemsrequirementtestmethodResult judgment High temperature test Temperature(°C) Testsample temperaturetime (H) Testduration(H) recoverytime(H) 85±3 1 96 2 Testprocedure: a)Putthetestpieceinto thetestbox,andthen adjustthetemperatureof thehightemperaturebox to85°C±3°C,and monitorthetime. b)Afterthetest,they wereplacedatroom temperaturefor2hours forroutineinspection. OK low temperature test temperature（°C） Temperaturetimeof testsample（h） Testduration（h） recoverytime（h） -40±3 1 96 2 Teststeps: A)Putthetestedparts intothetestchamber,and thensetthetemperature ofthecryogenicchamber to-40°C±3°Cfor monitoringtime. B)Placeatroom temperaturefor2hours afterthetestforroutine OK 6henzhenFeiyuxinElectronicsCo.,Ltd inspection. steady-state dampheat test temperature（°C） relativehumidity （%） Testduration（h） recoverytime（h） +85±2 85 96 2 A)Putthetestedparts intothetestchamber, thensetthetemperature ofthechamberto+85°C ±2°Candthehumidity to85%,andmonitorthe time. B)Placeatroom temperaturefor2hours afterthetestforroutine inspection. OK inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 5.2Freedroptest P/NCommodity specification testitemFreedroptest checkout equipment Onemeterhightabletopnumberof test inspection standard 1.Theproductfallsataheightof1meterwithoutfallingoff,cracking orotherdefects,andwithoutappearancedeformation. Nameof test testitemaskfortestmethodresultsof evaluation Freedrop test Dropheight: 1000mm It'sgoing tofall2 times Teststeps: A)Dropthetestedpartata heightof1000mmandconduct routineinspectionafter thetest. OK inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 6.3saltspraytest P/NCommodity specification testitemsaltspraytest checkout equipment Fogtesternumberoftest inspection standard 1.Themetalsurfacecoatingdoesnotfalloff;Appearancewithoutrust, corrosion,oxidationandotheradversephenomena. Nameof test testitemaskfortestmethodresultsof evaluation saltspray test 1.NaCl concentration： 2.airpressure： 40-60g/1kg 1.0±0.01kgf㎡ 6.5-7.2 A.Laboratory temperature: B.Pressuredrum OK 7henzhenFeiyuxinElectronicsCo.,Ltd 3.PHprice： 4.volumeofspray： 5.5.Saltwater testtemperature setting A.Laboratory temperature: B.Pressurebarrel temperature: 6.Testtime: 1.0-2.0ml/80c/h。 35±1°C 47±1°C 24H temperature:Test procedure: A)Modulatethesalt spraytesterto relevanttest conditions. B)Placethetested partinthesalt spraytesterfor24 hours.Afterthe test,rinsewith cleanwater, visuallyinspect theappearanceof thetestedparts, andconductroutine inspection. 6.Testtime: inspector：Luxiaojunaudit：Liuxiaopingratify：Liuzaiping 8henzhen Feiyuxin Electronics Co.,Ltd 6. Antenna performance tes

Page 1 of 104 Report No.: 220725611RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.1 FCC TEST REPORT Product Name: Router Trade Mark: AMTC, Boulanger, STRONG, essentiel b Model No.: WR1819M Add. Model No.: WR****M（* from 0 to 9) Report Number: 220725611RFC-1 Test Standards: FCC 47 CFR Part 15 Subpart C FCC ID: 2AHVH-WR1819M Test Result: PASS Date of Issue: September 7, 2023 Prepared for: Shen Zhen MTC Co., LTD MTC Industry Park, 1st Lilang Road, Xialilang community, Nanwan street, Longgang district, Shenzhen，China Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Kevin Liang Approved by: Date: September 7, 2023 Assistant Manager Page 2 of 104 Report No.: 220725611RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.1 Version Version No. Date Description V1.0 September 7, 2023 Original Page 3 of 104 Report No.: 220725611RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART15.247-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECI…

Text truncated - open the document above for the full version.