2AHW7-FEIYUVCAM3SRHRemote Handle for Feiyu Pocket 3

21 123 NCC警語 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得 擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之 使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規 定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫 療用電波輻射性電機設備之干擾。 FCC regulatory conformance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interferen (2)This device must accept any interference received, includ interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver --Connect the equipment into an outlet on a circuit different from that t which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. RF Exposure The SAR limit of USA (FCC) is 4.0 W/Kg averaged over ten gram of tissue. Device has also bee tested against this SAR limit, the testing distance of limbs is 0mm.

Rev 1/26/2023 (Guilin Feiyu Technology lncorporated Company) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 17 May 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AHW7-FEIYUVCAM3SRH Guilin Feiyu Technology lncorporated Company certifies that, as of the date of the filing of the application, Videndum Media Distribution US Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Guilin Feiyu Technology lncorporated Company accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Videndum Media Distribution US Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Videndum Media Distribution US Inc. Address: 50 Tice Blvd - Suite 205, Woodcliff Lake, NJ 07677, USA FRN: 0033449034 Contact Person: PHILIP Tel.: +1 201 818-9500 Fax No.: +1 201 818-9177 Email: [email protected] Sincerely, applicant name Guilin Feiyu Technology lncorporated Company U.S. Agent company name Videndum Media Distribution US Inc. Applicant printed name Alex Wang U.S. Agent printed name PHILIP Applicant signature U.S. Agent signature

Guilin Feiyu Technology lncorporated Company Agent Authorization Company: Guilin Feiyu Technology lncorporated Company Address: Feiyu Intelligent Industry Park, No.2, Chuangyou Road, Information Industry Park, Qixing District, Guilin, Guangxi, 541004, China Product Name: Remote Handle for Feiyu Pocket 3 Model Number(s): FeiyuVCAM3SRH Product Description: Remote Handle for Feiyu Pocket 3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023/5/23 Name: Alex Wang Title: Manager Company: Guilin Feiyu Technology lncorporated Company

Date:17May2023 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheGuilinFeiyuTechnologylncorporatedCompany,theundersigned,herebyauthorizesMr. WuXuewenfromShenzhenBALUNTechnologyCo.,Ltd.,toactonthebehalfoftheGuilinFeiyu TechnologylncorporatedCompanysolelyinmattersrelatingtotheapplicationforanFCC equipmentauthorizationforFCCID:2AHW7-FEIYUVCAM3SRHincludingthesigningof documentsinconnectionwiththisApplication.NecessaryactscarriedoutbyShenzhenBALUN TechnologyCo.,Ltd.inconnectionwiththeApplicationshallhavethesameeffectasactsofthe GuilinFeiyuTechnologylncorporatedCompany. TheGuilinFeiyuTechnologylncorporatedCompanyalsoherebycertifythatnopartytothis applicationissubjecttoadenialofbenefits,includingFCCbenefits,pursuanttoSection5301of theAnti-DrugAbuseActof1988,21U.S.C.Section862. YoursSincerely, __________ AlexWang

Guilin Feiyu Technology lncorporated Company Date:17 May 2023 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Guilin Feiyu Technology lncorporated Company FCC ID: 2AHW7-FEIYUVCAM3SRH FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Guilin Feiyu Technology lncorporated Company requests that the following documents regarding this submission for FCC ID: 2AHW7-FEIYUVCAM3SRH be kept Long-Term confidential: Exhibit TypeFile Name Block DiagramBlock Diagram.pdf SchematicsSchematics.pdf Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days): External photosExternal photos.pdf Test setup photostest photo.pdf Internal photosInternal photos.pdf User manualUser manual.pdf Those documents contain detailed system and equipment description and related information about the product which Guilin Feiyu Technology lncorporated Company considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Guilin Feiyu Technology lncorporated Company considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, Alex Wang Tune-up procedure.pdf Tune-up procedure

Report No.: BL-SZ2310478-AW 1 / 5 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2310478-AW 2 / 5 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ2310478-AW 3 / 5 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-SZ2310478-AW 4 / 5 Accessory-USB Cable Accessory Report No.: BL-SZ2310478-AW 5 / 5 Accessory-Pedestal --BLANK BELOW--

Location:thebackoftheproduct Label RemoteHandleforFeiyuPocket3 Model:FeiyuVCAM3SRH CMIITID:XXXXXXXXXX FCCID:2AHW7-FEIYUVCAM3SRH Manufacture:GuilinFeiyuTechnologylncorporatedCompany

Report No.: BL-SZ2310478-AI-2 1 / 3 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 FPC Antenna Report No.: BL-SZ2310478-AI-2 2 / 3 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW RF Chip Report No.: BL-SZ2310478-AI-2 3 / 3 BATTERY BL-SZ232011 --BLANK BELOW--

Report No.: BL-SZ2310478-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 43 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-2 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Guilin Feiyu Technology lncorporated Company Address: Feiyu Intelligent Industry Park, No.2, Chuangyou Road, Information Industry Park, Qixing District, Guilin, Guangxi, 541004, China Equipment Type: Remote Handle for Feiyu Pocket 3 Model Name: FeiyuVCAM3SRH Brand Name: FeiyuTech FCC ID: 2AHW7-FEIYUVCAM3SRH Test Standard: FCC 47 CFR Part 2.1093 (refer section 3.1) Maximum SAR: Limbs (10 g@0mm): 1.95 W/kg Sample Arrival Date: Jan. 11, 2023 Test Date: Feb. 13, 2023 Date of Issue: May 29, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xiong Lining Checked by: Xu Rui Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2310478-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 43 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-2 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 May 18, 2023 Initial Issue Rev. 02 May 29, 2023 Add Bluetooth BLE evaluation TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 1.3 Test Environment Condition .......................................................................................... 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 Factory Information ....................................................................................................... 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Ancillary Equipment ...................................................................................................... 5 2.6 Technical Information ................................................................................................... 6 3 SUMMARY OF TEST RESULT ................................................................................................. 7 3.1 Test Standards ............................................................................................................. 7 3.2 Device Category and SAR Limit ................................................................................... 8 3.3 Test Result Summary ................................................................................................. 11 3.4 Test Uncertainty ......................................................................................................... 12 4 MEASUREMENT SYSTEM ..................................................................................................... 13 4.1 Specific Absorption Rate (SAR) Definition .................................................................. 13 4.2 DASY SAR System .................................................................................................... 14 5 SYSTEM VERIFICATION ........................................................................................................ 21 5.1 Purpose of System Check .......................................................................................... 21 5.2 System Check Setup .................................................................................................. 21 6 TEST POSITION CONFIGURATIONS .................................................................................... 22 6.1 Product Specific 10g Exposure Consideration ............................................................ 22 Report No.: BL-SZ2310478-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 43 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-2 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 7 MEASUREMENT PROCEDURE ............................................................................................. 23 7.1 Measurement Process Diagram ................................................................................. 23 7.2 SAR Scan General Requirement ................................................................................ 24 7.3 Measurement Procedure ............................................................................................ 25 7.4 Area & Zoom Scan Procedure .................................................................................... 25 8 CONDUCTED RF OUPUT POWER ........................................................................................ 26 8.1 WIFI ............................................................................................................................ 26 8.2 Bluetooth .................................................................................................................... 26 9 TEST EXCLUSION CONSIDERATION ................................................................................... 27 9.1 SAR Test Consideration Table ................................................................................... 28 10 TEST RESULT ........................................…

Text truncated - open the document above for the full version.

http://www.feiyu-tech.com AnteMicroIntelligentCommunication(Shenzhen) Co.,Ltd AntennaDataSheet StandardsampleLimitsampleLimitedsample Customizedsamples CustomerName：GuilinFeiyuTechnologyCo.,Ltd ProductName：VCAM3SAntenna Antennamodel：VCAM3S AntennaType：FPCAntenna AntennaFrequency：2400MHz-2490MHz Manufacturer'sName：AnteMicroIntelligentCommunication(Shenzhen) Co.,Ltd Address：1stFloor,Building55,DayunSoftwareTown,No.8288 LonggangAvenue,LonggangDistrict,Shenzhen Telephone：0755-89584890 undertak e AnteMicroIntelligentCommunication (Shenzhen)Co.,Ltd EngineeringQualityApproval ZhangXiajuanYangMeizhenChenJiajia recogniz e GuilinFeiyuTechnologyCo.,Ltd RDSQEPM http://www.feiyu-tech.com Directory 1.Changeresume............................................................................................Page1 2.Productdrawings.........................................................................................Page2 3.Fullsizetestreport.......................................................................................Page3 4.Materialcertificate...................................................................................Page4-5 5.Shippinginspectionstandards......................................................................Page6 6.ShippingInspectionReport..........................................................................Page7 7.ReliabilityTestReport..................................................................................Page8 8.QCEngineeringDrawing&ManufacturingFlowChart...................................Page9 9.Packagingspecifications.............................................................................Page10 10.Antennaperformance...............................................................................Page10 11.Antennaperformance...............................................................................Page11 http://www.feiyu-tech.com 第1页 Revisionhistory Product name VCAM3S Antenna Product part number ATWE-01-0389- 010 Material quality FPC Revision date 2023-01-06 DrawingNo / versionRevA PreparationZhang Xiajuan ReviewYangHuaRatifyChenJiajia versi on ChangedescriptionDateChange department Changedby RevAFirstedition2023-01-06Engineering department ZhangXiajuan http://www.feiyu-tech.com 第2页 Productdrawings http://www.feiyu-tech.com 第3页 Finishedproductconfirmationreport Page：1/1 Product Model VCAM3SAnten na Custo m GuilinFeiyu Numberof detection s(pcs) 4PC S Dat e 2023-01-06 Testing tools 1.Verniercaliper D i m e n s i o n a l m e a s u r e m e n t ( U n i t : m m ) N u m b e r Stan dard publ ic erra nd Upper limit value Lower limit value Measureddata det ect ion Number of defects Judgment Size rang e 1234 too l OKNG 130.5±0.230.730.3 30.5 4 30.5 5 30.6 1 30.57①√ 223.55±0.223.7523.35 23.6 5 23.5 8 23.6 1 23.63①√ 350±0.250.2049.80 50.1 2 50.0 9 50.1 1 50.13①√ http://www.feiyu-tech.com 第4页 Fullsizetestreport MaterialqualityProof(seal) Comprehensive judgment OKremarksTheproductsizemeetstherequirements ApprovalChenJiajia Inspection and verificatio n Chen Liangwen Formulati onunit Engineering department FormNumber：ATWE-GC-0019A/0 http://www.feiyu-tech.com 第5页 http://www.feiyu-tech.com 第6页 Shippinginspectionstandards http://www.feiyu-tech.com 第7页 ShippingInspectionReport(Seal) FinishedProductDeliveryInspectionReport FormNumber：ATW-PZ-006A/1 InspectionDate:January6th,2023 CustomGuilinFeiyu Model/Product Name VCAM3SAntenna product Specification/M odel VCAM3S Total production / Samplinglevel MIL-STD-105E(II) Sampling quantity / Inspectionrecords SN Inspection items Inspectionrecords Judgment criteria notes OKNG 1 appearance Noappearancedefectssuchasdeformation, burrs,dirt,discoloration,etc OK 2 Printing Clearsilkscreencharactersandcorrect content OK 3 length18.2±0.15mmOK 4 width12.34±0.15mmOK notes： QualitydepartmentsupervisorinspectorOveralljudgment YangMeizhenWeiJiangrui qualifiedunqualified √ http://www.feiyu-tech.com 第8页 ReliabilityTestReport Constanttemperatureandhumidity,inkadhesiontestreport CustomGuilinFeiyuDate2023-01-06 specific ations FPC Product name VCAM3SAntennanumber2PCS Test time 280min Testpurpose:Totestthereliabilityoftheproductandtheadhesionofthecoating,as wellastheoxidationandcorrosionresistanceofthecoating. Equipmentname:Highandlowtemperaturetestbox TestingParameters temperat ure hightemperature70°C low temperat ure Temperatur etolerance 1°C time c o n s t a n t t e m p e r a t u r e high tempera ture 24h High temperat urerise 10min notes low tempera ture Low temperat ure cooli ng Number of cycles 0other relative humidity 95%±1% Visual inspecti on laminati on ACCfoldACC bubb le ACC Ink detachment ACC ThejudgmentresultACCispassedandNGisunqualified. LocaldiaphaneityTest Tools:Baigeknife,3M600tape Conclusi on: Performthree90°tensiletestsonthe 100gridareausing3M600,andtheink sheddingareaislessthan5%,which http://www.feiyu-tech.com 第9页 meetsthetestingrequirements. Testedby:WeiJiangruiReview：ChenLiangwen QCEngineeringDrawing&ManufacturingFlowChart http://www.feiyu-tech.com 第10页 Packagingspecifications ATWEproductPackagingspecifications Developmentdepartment：Engineeringdepartment formulateDate：January6,2023 Productname VCAM3SAntenna Customer Name GuilinFeiyu Specification andmodel 30.5*23.55mmSinglepanelFPC Product part number ATWE-01-0389-010 http://www.feiyu-tech.com 第11页 一、PEselfsealingbag,100PCS/bag。 (Refertothediagram) 2、Loadalargebox.(Thequantityisbasedontheactualorderandpackagingquantity)III.Sealthebox, andattachourproductionlabelandROHSlabeltotheouterbox Note:Theabovepackagingmethodsareforreference.Afterformalmassproduction,thespecificpackagingquantity mayvarydependingontheproductform.Ifyouhaveanyobjectionstotheabovepackagingmethods,pleaseraisethem beforeourcompanyreceivesthefirstorder,sothatourcompanycancomplywithyourpackagingrequirementsandavoid productqualityissuescausedbyinsufficientcommunication. TabulationZhangXiajuanApprovalChenLiangwen FormNumber:ATWE-GC-0031 A/0 http://www.feiyu-tech.com 第12页 Antennaperformance SchematicdiagramofAntenna…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2310478-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Guilin Feiyu Technology lncorporated Company Address: Feiyu Intelligent Industry Park, No.2, Chuangyou Road, Information Industry Park, Qixing District, Guilin, Guangxi, 541004, China Equipment Type: Remote Handle for Feiyu Pocket 3 Model Name: FeiyuVCAM3SRH Brand Name: FeiyuTech FCC ID: 2AHW7-FEIYUVCAM3SRH Test Standard: 47 CFR Part 15 Subpart C (refer section 3.1) Sample Arrival Date: Jan. 11, 2023 Test Date: Mar. 16, 2023 - Apr. 14, 2023 Date of Issue: May 18, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2310478-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 May 18, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 7 3.1 Test Standards ............................................................................................................... 7 3.2 Test Verdict .................................................................................................................... 7 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 8 4.1 Test Environments ......................................................................................................... 8 4.2 Test Equipment List ........................................................................................................ 8 4.3 Test Software List ........................................................................................................... 8 4.4 Measurement Uncertainty .............................................................................................. 9 4.5 Description of Test Setup ............................................................................................... 9 4.6 Measurement Results Explanation Example ................................................................ 12 5 TEST ITEMS .............................................................................................................................. 13 5.1 Antenna Requirements ................................................................................................. 13 5.2 Output Power ............................................................................................................... 14 5.3 Occupied Bandwidth .................................................................................................... 16 5.4 Conducted Spurious Emission ..................................................................................... 17 Report No.: BL-SZ2310478-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.5 Band Edge (Authorized-band band-edge) .................................................................... 19 5.6 Conducted Emission .................................................................................................... 21 5.7 Radiated Spurious Emission ........................................................................................ 22 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 27 5.9 Power Spectral density (PSD) ...................................................................................... 28 ANNEX A TEST RESULT ............................................................................................................. 29 A.1 Output Power, Duty Cycle ............................................................................................ 29 A.2 Occupied Bandwidth .................................................................................................... 31 A.3 Conducted Spurious Emissions ................................................................................... 33 A.4 Band Edge (Authorized-band band-edge) .................................................................... 36 A.5 Conducted Emissions .....................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2310478-602 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 70 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Guilin Feiyu Technology lncorporated Company Address: Feiyu Intelligent Industry Park, No.2, Chuangyou Road, Information Industry Park, Qixing District, Guilin, Guangxi, 541004, China Equipment Type: Remote Handle for Feiyu Pocket 3 Model Name: FeiyuVCAM3SRH Brand Name: FeiyuTech FCC ID: 2AHW7-FEIYUVCAM3SRH Test Standard: 47 CFR Part 15 Subpart C (refer section 3.1) Sample Arrival Date: Jan. 11, 2023 Test Date: Jan. 31, 2023 - Mar. 16, 2023 Date of Issue: May 18, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2310478-602 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 70 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 May 18, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Output Power ............................................................................................................... 15 5.3 Occupied Bandwidth .................................................................................................... 17 5.4 Conducted Spurious Emission ..............…

Text truncated - open the document above for the full version.