2AI3W-VR010Vinyl Record Player

Vinyl Record Player User Manual Simplified Safety & Operating Instructions 1. Read all safety and operating instructions before use. 2. Keep these instructions for future reference. 3. Follow all warnings on the product and in the manual. 4. Comply with all operating instructions. 5. Do not use near water or moisture (e.g., wet basement, swimming pool). 6. Clean only with a dry cloth. 7. Do not block ventilation openings. Maintain at least 5 cm clearance around the device for ventilation, and install per manufacturer’s instructions. 8. Do not install near heat sources (radiators, heaters, stoves, etc.). 9. Use only manufacturer-specified attachments and accessories. 10. Use only with manufacturer-approved carts, stands or brackets. Take care when moving the cart to prevent tipping and injury. 11. Unplug the device during thunderstorms or when not in use for a long time. MODEL:VR010 RECORD PLAYER OPERATION 1. The speaker has a built-in rechargeable battery. Fully charge it before first use. 2. Place the vinyl record on the turntable. 3. Set the correct speed (33/45/78 RPM). Use the RPM adapter for 45 RPM records. 4. Turn the knob to PHONO, then switch on the turntable power. 5. Release the tonearm lock, lift the tonearm, position it over the record, then lower it gently. Playback will start automatically. 6. Adjust the speaker volume to your preferred level. 7. The tonearm stops automatically at the end of the record. Manually return it to the rest and lock. 8. To stop mid-play: lift the tonearm, manually return and lock it, lower the control, then turn off the power. Wireless CONNECTION 1. The wireless function turns on automatically when you power on the record player. 2. Enable Bluetooth on your device (phone, tablet, computer). 3. In Bluetooth settings, select “ Myvision ” to pair. 4. Connection is complete; you can now play music. HEADPHONE JACK Connect your headphones to this output to listen to music. Headphones are not included with the turntable. Note: When using headphones, sound will no longer come out of the speakers. RCA AUDIO OUTPUT It allows you to play the music from your turntable through external speaker. To make this connection you need an RCA cable that is not included with the turntable. PLAYING 45 RPM VINYL RECORDS Place the 45 RPM adapter on the center shaft. Carefully place a 45 RPM record on the turntable. Follow the turntable's operating instructions to start playback HOW TO REPLACE THE NEEDLE HEAD 1. Open the tonearm clamp. 2. Remove the cartridge cover to expose the needle. 3. Carefully detach the cartridge from its holder. 4. Gently pull the audio wires from the cartridge by the connector, not the cable. 5. Carefully reinsert the audio wires. 6. Ensure the audio wires do not touch each other. 7. Slide and secure the cartridge into the holder. 8. To install a new cartridge, reverse steps 3 and 4. CLEANING 1. Clean records with an anti-static cloth for best sound quality and longer life. 2. Regularly clean the stylus with a soft brush lightly dipped in alcohol, brushing from the back to the fron t of the cartridge. Product Specifications: Operating Frequency: 2.402–2.480GHz Maximum Transmit Power: +4 dBm / <2.5 mW Battery: 3.7V 4000mAh Speak er Output: L 10W X2 ,H 5W X2 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rev 1/26/2023 Shenzhen Maiweixun Eletronic Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-08-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AI3W-VR010 [Shenzhen Maiweixun Eletronic Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Maiweixun Eletronic Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Emily Zeng Rev 1/26/2023 Shenzhen Maiweixun Eletronic Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-08-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AI3W-VR010 [Shenzhen Maiweixun Eletronic Co., Ltd] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Emily Zeng

Shenzhen Maiweixun Eletronic Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: September 8, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AI3W-VR010 Shenzhen Maiweixun Eletronic Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, GLOBAL PRODUCT PROMOTION (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. GLOBAL PRODUCT PROMOTION ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: GLOBAL PRODUCT PROMOTION FRN: 0037700671 Address: 350 NORTHERN BLVD STE 324-1331, ALBANY, NY, 12204, United States Signature: Contact Person: David Kim Tel: (949)254-2565 Email: [email protected] Applicant Company Name: Shenzhen Maiweixun Eletronic Co., Ltd FRN: 0025727173 Address: 7/F,4th building , Baimenqian industrial area, 215th Busha road, Longgang district, Shenzhen, China, 518129 Signature: Contact Person: Emily Zeng Tel: 0755-84571706 Email: [email protected]

Shenzhen Maiweixun Eletronic Co., Ltd Date: September 8, 2026 Product Model Number: VR010, VR011, VR012 FCC ID: 2AI3W-VR010 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Emily Zeng Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-84571706 On behalf of: Shenzhen Maiweixun Eletronic Co., Ltd

Shenzhen Maiweixun Eletronic Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 8, 2026 Subject; Request for Confidentiality FCC ID: 2AI3W-VR010 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emily Zeng Title: Manager

Shenzhen Maiweixun Eletronic Co., Ltd Model Difference Statement DATE: September 8, 2026 FCC ID: 2AI3W-VR010 Dear Sir/Madam, Added models VR011, VR012 asis of the original product VR010. The appearance colors, buttons, sizes and model names of the listed series models are different from those of the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Emily Zeng Title: Manager Company name: Shenzhen Maiweixun Eletronic Co., Ltd Address: 7/F,4th building , Baimenqian industrial area, 215th Busha road, Longgang district, Shenzhen, China, 518129

Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Annex A. EUT External Photos Model: VR010 EUT View 1 EUT View 2 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Model: VR011 EUT View 9 Model: VR012 EUT View 10 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT View 11

Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 42mm *10mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Annex B. EUT Internal Photos Model: VR010 EUT Internal View 1 EUT Internal View 2 BT Antenna Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 7 EUT Internal View 8 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 9 EUT Internal View 10 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Model: VR011 EUT Internal View 1 EUT Internal View 2 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 7 EUT Internal View 8 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 9 EUT Internal View 10 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 11 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Model: VR012 EUT Internal View 1 EUT Internal View 2 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 7 EUT Internal View 8 Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report EUT Internal View 9 EUT Internal View 10

FCC ID: 2AI3W-VR010 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BR/EDR Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 1.5 1(±1) 2 1.58 2402 5 0.489749 3.0 So a SAR test is not required

Summary Inverted F Antenna Specification ITEM ANT SPEC Model Name 2.4G ANT Center Frequency Horizontal Vertical 2400MHz 2400MHz 2500MHz 2400MHz 2400MHz 2500MHz -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Antenna type PCB Antenna Impedance 50 Ohm length and width 15.2*5.7mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Address 333 Kexing Road, Xiangzhou District, Zhuhai City, Guangdong Province Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Frequency (MHz) Gain(dBi) Max Min Avg 2400 -1.26174-30.0801-7.18716 2450 -0.765802-36.5604-7.48023 2500 -0.585582-22.0315-6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Frequency (MHz) Gain(dBi) Max Min Avg 2400 -5.2537-22.1424-12.4294 2450 -2.4652-24.5837-10.4702 2500 -1.86120-29.5214-9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Report No: SSP26070580-1 FCC Test Report Page 1 of 51 FCC TEST REPORT FCC ID: 2AI3W-VR010 Report No. : SSP26070580-1 Applicant : Shenzhen Maiweixun Eletronic Co., Ltd Product Name : Vinyl Record Player Model Name : VR010 Test Standard : FCC Part 15.247 Date of Issue : 2026-08-03 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26070580-1 FCC Test Report Page 2 of 51 Test Report Basic Information Applicant..................................: Shenzhen Maiweixun Eletronic Co., Ltd Address of Applicant...............: 7/F,4th building , Baimenqian industrial area, 215th Busha road, Longgang district, Shenzhen, China, 518129 Manufacturer..........................: Shenzhen Maiweixun Eletronic Co., Ltd Address of Manufacturer........: 7/F,4th building , Baimenqian industrial area, 215th Busha road, Longgang district, Shenzhen, China, 518129 Product Name.........................: Vinyl Record Player Brand Name.............................: Myvision Main Model..............................: VR010 Series Models..........................: VR011, VR012 Test Standard..........................: FCC Part 15 Subpart C ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Date of Test .............................: 2026-07-28 to 2026-08-01 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26070580-1 FCC Test Report Page 3 of 51 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ........................................…

Text truncated - open the document above for the full version.

Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26070580-1 FCC ID: 2AI3W-VR010 Annex of Test Report Radiated Emission Test View Above 1GHz