2AI6I-TW969Bluetooth Earbuds

Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] Date: 2023-06-12 To whom it may concern Dear Sir/Madam, We, Guangzhou Havit Technology Co.,LTD, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product name: Bluetooth Earbuds, Model name: TW969, TW947, TW910, TW952 PRO, TW972, GT-Y15, TW975, GT-FC17, FCC ID:2AI6I-TW969) The product only supports Bluetooth (GFSK, π／4 DQPSK) Mode, the other functions, bands and modes were disable by software, the end user has no capability to activate it. Sincerely, Signature: Printed Name: Yang Wei Title: Manager

Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 06/06/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AI6I-TW969 Guangzhou Havit Technology Co.,LTD (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Guangzhou Havit Technology Co.,LTD (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Wei Yang Title: Manager Company Name& Address: Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID:2AI6I-TW969 Guangzhou Havit Technology Co.,LTD certifies that, as of the date of the filing of the application, USA MEIHUA TRADING INC is our designated U.S. agent for service of process for the above referenced FCC ID. Guangzhou Havit Technology Co.,LTD accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. USA MEIHUA TRADING INC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: USA MEIHUA TRADING INC Address: 5379 Pine Valley Ct Boulder CO 80301 United State Tel.: -312-363-9424 Email: [email protected] Signed by (printed name): Harley Quinn Signature: Applicant: Guangzhou Havit Technology Co.,LTD Address: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China FRN: 0025744657 Tel: +86-20-66820279 Email: [email protected] Signed by (printed name): Wei Yang Signature:

QA-FR-170-B Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] FCC Authorization Date: 2023-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Guangzhou Havit Technology Co.,LTD, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Wei Yang Title: Manager

QA-FR-171-A Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] FCC Confidential Authorization Date: 2023-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AI6I-TW969 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Guangzhou Havit Technology Co.,LTD) hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Wei Yang Title: Manager

Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] Date: 2023‐06‐20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Guangzhou Havit Technology Co.,LTD, hereby submits FCC ID:2AI6I-TW969 justification for placing the FCC ID label to Charging box. According to the FCC Regulation and Guidence (KDB Publication 784748 D01 v09R01) allows for the FCC to be removed to Charging box if the device is Unquestionably too small for the FCC ID label to be printed. The measurement of headset: Length (29mm)*Width (19.7mm), The label Length (35mm)* Width(32mm), Charging box: 52mm*50mm Referring to the above quote,as the headset are too small for the FCC ID label to be printed, so the FCC ID label will be moved to the Charging box. Below photo will show the detail: Printed Name: Wei Yang Title: Manager 13.15mm 29mm 19.7mm 52mm 35mm 32mm 50mm

Guangzhou Havit Technology Co.,LTD Add: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China Tel: +86-20-66820279 Fax: +86-20-66856369 Email: [email protected] DECLARATION OF SIMILARITY Date: 2023-06-08 To whom it may concern Dear Sir or Madam: We, Guangzhou Havit Technology Co.,LTD, hereby declare that the product: Bluetooth Earbuds, model: TW947, TW910, TW952 PRO, TW972, GT-Y15, TW975, GT-FC17 are electrically identical with the model: TW969, FCC ID:2AI6I-TW969, which was tested by China Certification ICT Co., Ltd (Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between eight models and that are declared similar are as follows: They are the same product, and just the different model name, the rest are the same. The detail information, please check the reports. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Wei Yang Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Uncover Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230523311-00 Page 49 of 49 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.2 Measurement Result The max conducted power including tune-up tolerance is 4.0 dBm (2.51 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =2.51/5*(√2.480) = 0.8< 3.0 Result: Compliant. The stand-alone SAR evaluation is not necessary. ===== END OF REPORT =====

Antenna Test Report Customer Havit ProjectJD-969 Antenna RevisionA0 Prepared by15993920520 Checked by18814303605 Date:2023.4.23 Purpose This report is to measure the performance of antenna forJD-969The antenna operating frequency at 2400MHz-2500MHz 。 All test data are showed as below. Content 1. Product Overview & Dimension 2. Test system 3. Test Result 4. Test Result 4.1 S11 Parameter-VSWR 4.2 Gain & Efficiency 4.3 Test coordinate 4.4 2D Pattern 4.5 OTA Sequence Number Test Item equipment S parameter VSWR Agilent 5071C & Agilent 5071C OTA TestTRP&TIS Agilent8960 & CMW500 Gain & Efficiency Gain & Efficiency Agilent 5071C 2.TestSystem 3.Antenna 4.TestResult 4.1 S11 Parameter-VSWR Frequency (MHz) 2400245024802500 VSWR2.301.101.752.43 4.Test Result 4.1 S11 Parameter-Log Mag Frequency (MHz) 2400245024802500 Log Mag-8.08-26.00-12.28-7.57 4.TestResult 4.1 S11 Parameter-Smi th Frequency (MHz) 2400245024802500 Smi th(Ω)21.8453.0571.0060.23 4.5 DATA Test Condition：3D chamber BandChannel BT 0 1.48 39 2.51 78 2.20 Gain(dBi) 4. Test Result 4.4 2D Pattern——BT ANT

TEST REPORT Applicant: Guangzhou Havit Technology Co.,LTD Address: ROOM 1307, 13F, PHASE 2 B, C BUILDING OF POLY WORLD TRADE CENTER, NO.1000, XINGANG EAST ROAD, HAIZHU, GUANGDONG, 510000, China FCC ID: 2AI6I-TW969 Product Name: Bluetooth Earbuds Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230523311-00 Date Of Issue: 2023/6/25 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230523311-00 Page 2 of 49 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230523311-00 Page 3 of 49 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup.................................................................................................................................................... 11 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 11 3.1.4 Test Procedure ............................................................................................................................................. 12 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 12 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 13 3.2.1 Applicable Standard ..................................................................................................................................... 13 3.2.2 EUT Setup.................................................................................................................................................... 13 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 14 3.2.4 Test Procedure ............................................................................................................................................. 14 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.3 20 DB EMISSION BANDWIDTH .................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View Radiated Emission Above 1GHz View