2AI8K-EK4FNDEkster Finder Card

Ekster Finder Card User Manual Charge the card • Connect the cable to the card for charging, Charge the Card for, at least, 2 hours. Enable pairing mode • Press the button once. The LED is flashing, indicating that the Gard is ready for pairing. (Remark: The tag will turn OFF if not pair within 10 mins) • From IOS device, launch Find My. • Under “Items”, select Add Item. • Select “Other Supported Item”. Your device will now search for “Ekster Finder Card” • As soon as you see “Ekster Finder Card” display on your device, follow the on-screen prompts to complete the pairing process. A tone is heard from the Card. Factory reset  Press the button 3 times and on the fourth time press and hold the button.  A tone is heard.  The Card is in pairing mode until it is paired. (Remark: The tag will turn OFF if not pair within 10 mins) Learn more  Press the button one time.  Tap “Continue On Website” for more information including any Lost Mode message from the owner and serial number of the card. Instructions for disabling  Press the button 2 times and on the third time press and hold the button.  The LED shall turn off after a while. This will stop sharing the location of this card. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CE Statement We declare that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Our product does not contain the AC/DC adapter. You need to purchase an DC 5V/1A adaptor which compliance with the directive 2014/30/EU. The adapter shall be installed near the equipment and shall be easily accessible. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

EksterB.V. Address：Rokin38E,1012KT,Amsterdam,TheNetherlands Date:2024-02-02 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AI8K-EK4FND FRN:0025762477 (“EksterB.V.”)certifiesthat,asofthedateofthefilingoftheapplication,GSSSERVICEINC isourdesignatedU.S.agentforserviceofprocessfortheabovereferencedFCCID.(“Ekster B.V.”)acceptstomaintainanagentfornolessthanoneyearafterthegranteehasterminated allmarketingandimportationortheconclusionofanyCommission-relatedproceeding involvingtheequipment. GSSSERVICEINCaccepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:GSSSERVICEINC Address:6547NAcademyBlvd#2266ColoradoSpringsCOLORADO80918UnitedStates FRN：0033402082 ContactPerson:MichouxLogan Tel.:001-949-2990192 Email:[email protected] Sincerely, Signedonbehalfof（EksterB.V.） SignedonbehalfofGSSSERVICEINC Name:RickScharniggName:MichouxLogan Title:ManagerTitle:Manager Date:2024-02-02Date:2024-02-02

EksterB.V. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:February1,2024 FCCID:2AI8K-EK4FND Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing (“EksterB.V.”)certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing (“EksterB.V.”)certifiesthat,asofthedateofthefilingoftheapplication,EksterB.V. isnotidentifiedontheCoveredListasanentityproducing“covered”equipment. Applicant:EksterB.V. Address:Rokin38E,1012KT,Amsterdam,TheNetherlands ContactPerson:RickScharnigg Tel.:+31613062850 Email:[email protected] Sincerely, Signature:

Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT 2400MHz Center Frequency MAX. Gain 2.3dBi Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length14.50mm Manufacture Skytech Creations Limited Antenna Photo & Length (mm) Address Antenna Type: PCB Antenna 2450MHz 2500MHz 0.453 2.191 Unit 711, 7/F, 8W Building, Science Park West Avenue, Science Park, Shatin, Hong Kong. 2.300

EksterB.V. Date：2024-02-01 ProductModelNumber:EK4-FND-APL,EK-FIND-CAR FCCID：2AI8K-EK4FND Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyORGANIZATION.onourbehalf shallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:+31613062850 Onbehalfof:EksterB.V.

EksterB.V. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:February2,2024 Subject;RequestforConfidentiality FCCID:2AI8K-EK4FND ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:RickScharnigg Title:Manager

EksterB.V. ModelDifference Productdescription:EksterFinderCard Modelname:EK4-FND-APL,EK-FIND-CAR FCCID:2AI8K-EK4FND AllthemodelsarethesamecircuitandRFmodule.Onlythemodelnamesare different.ThemodelEK4-FND-APListhetestedsample. Regards Sincerely Client’ssignature: Client’sname/title:RickScharnigg/Manager Contactinformation/address:Rokin38E,1012KT,Amsterdam,TheNetherlands

FCCID:2AI8K-EK4FND EUTPHOTOS(ExternalPhotos) FCCID:2AI8K-EK4FND FCCID:2AI8K-EK4FND FCCID:2AI8K-EK4FND ※※※※※ENDOFREPORT※※※※※

LabelLocation

FCCID:2AI8K-EK4FND EUTPHOTO(InternalPhotos) FCCID:2AI8K-EK4FND FCCID:2AI8K-EK4FND ※※※※※ENDOFREPORT※※※※※ ANT

FCCID:2AI8K-EK4FND RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1093，Unless specificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-gheador bodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,by measurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTest ExclusionThresholdcondition(s),listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f (GHz) ]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Here, ForBluetooth Mode Max Power (dBm) Tune-up power (dBm) Max Power (mW) Frequency(MHz) Min. Distance (mm) Calc. thresholds limit BLE3.073+12.5124415 0.784 3.0 SoaSARtestisnotrequired

ProjectNo.:ZHT-240122023E Page 1 of 41 FCCTESTREPORT FCCID:2AI8K-EK4FND ReportNumber. .................................. :ZHT-240122023E DateofTest ....................................................... :Jan.22,2024toJan.31,2024 Dateofissue ......................................... :Jan.31,2024 TestResult..........................................: PASS TestingLaboratory............................: GuangdongZhonghanTestingTechnologyCo.,Ltd. Address...............................................: Room104,Building1,YibaolaiIndustrialPark,QiaotouCommunity, FuhaiStreet,Bao'anDistrict,Shenzhen,Guangdong,China Applicant'sname ............................. : EksterB.V. Address ............................................... : Rokin38E,1012KT,Amsterdam,TheNetherlands Manufacturer'sname ...................... : SkytechCreationsLimited Address ............................................... : Unit711,7/F,8WBuilding,ScienceParkWestAvenue,Science Park,Shatin,HongKong. Testspecification: Standard ................................................ : FCCCFRTitle47Part15SubpartCSection15.247 Testprocedure.....................................: KDB558074D0115.247MeasGuidancev05r02 ANSIC63.10:2013 Non-standardtestmethod ................ : N/A ThisdevicedescribedabovehasbeentestedbyZHT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZHT,thisdocumentmay bealteredorrevisedbyZHT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................: EksterFinderCard Trademark...........................................: Ekster Model/Typereference.........................: EK4-FND-APL, EK-FIND-CAR ModelDifference.............................:Theonlydifferenceisthemodelname Ratings..................................................: Input:DC3VorBuilt-in3.7Vbattery ProjectNo.:ZHT-240122023E Page 2 of 41 Testingprocedureandtestinglocation: TestingLaboratory.......................................:GuangdongZhonghanTestingTechnologyCo.,Ltd. Address............................................................:Room104,Building1,YibaolaiIndustrialPark,Qiaotou Community,FuhaiStreet,Bao'anDistrict,Shenzhen, Guangdong,China LeonLi Testedby(name+signature).......................: BaretWu Reviewer(name+signature).......................: LeviLee Approved(name+signature).......................: ProjectNo.:ZHT-240122023E Page 3 of 41 TableofContentsPage 1.VERSION.................................................................................................................................................5 2.SUMMARYOFTESTRESULTS.............................................................................................................6 2.1TESTFACILITY...............................................................................................................................7 2.2MEASUREMENTUNCERTAINTY..................................................................................................7 3.GENERALINFORMATION.....................................................................................................................8 3.1GENERALDESCRIPTIONOFEUT...............................................................................................8 3.2DESCRIPTIONOFTESTMODES..................................................................................................9 3.3TESTSETUPCONFIGURATION....................................................................................................9 3.4DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)....................................................10 3.5EQUIPMENTSLISTFORALLTESTITEMS................................................................................11 4.1CONDUCTEDEMISSIONMEASUREMENT................................................................................13 4.1.1POWERLINECONDUCTEDEMISSIONLimits.................................................................13 4.1.2TESTPROCEDURE.............................................................................................................13 4.1.3DEVIATIONFROMTESTSTANDARD................................................................................13 4.1.4TESTSETUP........................................................................................................................14 4.1.5EUTOPERATINGCONDITIONS.........................................................................................14 4.1.6TESTRESULTS...................................................................................................................15 4.2RADIATEDEMISSIONMEASUREMENT.....................................................................................17 4.2.1RADIATEDEMISSIONLIMITS............................................................................................17 4.2.2TESTPROCEDURE.............................................................................................................18 4.2.3DEVIATIONFROMTESTSTANDARD................................................................................18 4.2.4TESTSETUP........................................................................................................................18 4.2.5EUTOPERATINGCONDITIONS.........................................................................................19 5.RADIATEDBANDEMISSIONMEASUREMENT..................................................................................24 5.1TESTREQUIREMENT:...........................................................................................................24 5.2TESTPROCEDURE................................................................................................................24 5.3DEVIATIONFROMTESTSTANDARD...................................................................................24 5.4TESTSETUP..............................................................…

Text truncated - open the document above for the full version.

FCCID:2AI8K-EK4FND EUTTESTPHOTOS FCCID:2AI8K-EK4FND