2AIIH-OQB2020Optiqo - Qlvr Box

User Manual Optiqo - Qlvr Box OQB2020 Installing the device 1.Begin by wiping the surface thoroughly, preferably with an all-purpose cleaner, in order to eliminate any grease or other residue from the area where the Qlvr Box is to be installed. 2.Allow the area to dry prior to affixing the Qlvr Box. 3.Apply double sided tape, or other adhesive, to the back of the Qlvr Box and affix t o the wall at an approximate height of 150-175 cm from the floor. If the surface is not suitable for tape, you can attach the device by inserting metal screws into the pre- fabricated holes inside the unit casing (screws not provided) Note. When installing multiple Qlvr Boxes throughout any given area, be sure to record the serial number of the Qlvr Box (located inside at the bottom) along with a unique room indicator such as a specific room number or name of your choosing. Recording of time and attendance 1.Hold the NFC card/tag against the "Optiqo Qlvr Box" logo below the screen until such time that the device emits a beeping sound. The screen will then flash, and the clock will automatically update to the current time. Note: If the Qlvr Box is programmed to calculate the IN/OUT function (time and attendance), be sure that it displays "IN" on the screen when you tag your arrival and "OUT" when you tag that you are exiting the premises or terminating your shift. Legend Data uploading is in progress (20-30 seconds). Note: During the upload, no new tagging (registrations) can be recorded. ______________________________ The upload was successful. ______________________________ The upload failed. This may be due to the fact that the cellular network is currently unstable, or the battery level is low. ______________________________ Appears when an IN or arrival scan is registered if the Qlvr Box is set to IN and OUT function. ______________________________ Displayed when an OUT or exiting scan is made if the Qlvr Box is set to IN and OUT function. ______________________________ Low battery. Use the key provided to open the Qlvr Box and replace the batteries (6 AA batteries). Once inserted, wait between 10-60 seconds for the Qlvr Box to reboot to its normal setting. ______________________________ The Box does not recognize the scanned card/tag. This may be due to the card/tag that is being scanned is not a recognized user for that specific unit or, in rare cases, the NFC tag is malfunctioning and will require replacing. ______________________________ Report access login Login credentials for access to data reporting are provided by Optiqo or your distributor. Automatic report to e-mail. All registered scanning reports can be automatically sent to pre-determined email addresses with self-applied delivery frequencies. Contact Optiqo or distributor for an order. Optional Visitor Counter (PIR sensor) Optiqo Qlvr Box can be customized with a traffic counter in order to register visitors. When a predetermined target value (threshold) is reached, notifications are sent to pre- determined e-mail addresses. Login credentials for modifications to target values are provided by Optiqo or your distributor. Technical specification Operating voltage: 4.5-10V DC NFC Frequency: 13.56 MHZ Screen type: E-Paper Resolution: 400x300 GSM Frequency: 800-900MHZ 1800-1900MHz SIM: Surface mounted SIM Operator: Telia Sonera Denmark Roaming: Active roaming Batteries: 6xAA Flash memory : 1Gb RTC: +-20ppm Connection range: (max) 1g/hour (min) 1g/week Optional: PIR sensor (hit counter) 9 m range Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Indus try Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to com ply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in a ccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is en couraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the de aler or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To main tain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Optiqo Sweden AB Date: 2020-05-18 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AIIH-OQB2020 To Whom It May Concern: This letter is to statement that OQB2020 / Optiqo - Qlvr Box. has been tested according to FCC Part 15B by Waltek Services (Shenzhen) Co., Ltd. (Test Report No.: WTU20S04017852E). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature [Andreas Wahlstroem] [Manager] [Optiqo Sweden AB]

Optiqo Sweden AB Date: Mar 18, 2020 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AIIH-OQB2020 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Block Diagram Operational Description Part List Tune-up Procedure Schematics.pdf Block Diagram.pdf Operational Description.pdf Part List.pdf Tune-up Procedure.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Optiqo Sweden AB Signature Andreas Wahlstroem / Manager Typed name and Title

Optiqo Sweden AB Date: 5/18/2020 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD To Whom It May Concern: We, Optiqo Sweden AB, state that our device, FCC ID: 2AIIH-OQB2020, has a non-removable rear cover. The label will be placed on the rear cover. And the label will be visible to the end users when they purchase the product. The back cover can not be moved away, so the FCC ID label has to be placed on the surface of product. Sincerely, Signature [Andreas Wahlstroem (Name)] [Manager (Title)] [Optiqo Sweden AB. (Company name)]

Optiqo Sweden AB FCC ID: 2AIIH-OQB2020 POWER OF ATTORNEY Date: Mar 18, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Mar 17, 2021. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Optiqo Sweden AB are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Optiqo Sweden AB Signature Andreas Wahlstroem / Manager Typed name and Title

Appendix-OQB2020-Photos Page 2 of 8 EUT – External View Model OQB2020 FCC ID: 2AIIH-OQB2020 Appendix-OQB2020-Photos Page 3 of 8 Appendix-OQB2020-Photos Page 4 of 8

OQB2020 Label Sample and Location

Appendix-OQB2020-Photos Page 6 of 10 EUT – Internal View Model OQB2020 FCC ID: 2AIIH-OQB2020 NFC ANT. Appendix-OQB2020-Photos Page 7 of 10 Appendix-OQB2020-Photos Page 8 of 10 Appendix-OQB2020-Photos Page 9 of 10 Appendix-OQB2020-Photos Page 10 of 10 ======End====== 2G ANT.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 7 TEST REPORT Reference No. .................... : WTU20S04016795W002 V3 FCC ID ................................ : 2AIIH-OQB2020 Applicant ............................ : Optiqo Sweden AB Address .............................. : Roxviksgatan 8A, 58273 Linkoeping, Sweden Manufacturer .................... : Magnificent Cleaning Equipment Co., Ltd. Address .............................. : 369 Pujin Raod, Linhu Town, Wuzhong District, Suzhou 215105, China Product ............................... : Optiqo - Qlvr Box Model(s). ............................ : OQB2020 Brand Name ....................... : N/A Standards........................... : FCC 1.1307 Date of Receipt sample .... : 2020-04-07 Date of Test ....................... : 2020-04-14 to 2020-04-20 Date of Issue ...................... : 2020-06-17 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Ford Wang / Project Engineer Philo Zhong / Manager Reference No.: WTU20S04016795W002 V3 Page 2 of 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................ 4 4.2 DETAILS OF E.U.T. ......................................................................................................................................... 4 5 TEST SUMMARY .................................................................................................................................................. 5 6 RF EXPOSURE ...................................................................................................................................................... 6 6.1 PROCEDURES AND REQUIREMENTS ............................................................................................................... 6 6.2 THE PROCEDURES / LIMIT ................................................................................................................................ 6 6.3 MPE CALCULATION METHOD ......................................................................................................................... 7 Reference No.: WTU20S04016795W002 V3 Page 3 of 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Revision History Test report No. Date of Receipt sample Date of Test Date of Issue Purpose Comment Approved WTU20S04016 795W002 2020-04-07 2020-04-14 to 2020-04- 20 2020-04-21 original - Replaced WTU20S04016 795W002 V1 2020-04-07 2020-04-14 to 2020-04- 20 2020-06-11 Version 1 Updated Replaced WTU20S04016 795W002 V2 2020-04-07 2020-04-14 to 2020-04- 20 2020-06-16 Version 2 Updated Replaced WTU20S04016 795W002 V3 2020-04-07 2020-04-14 to 2020-04- 20 2020-06-17 Version 3 Updated Valid Reference No.: WTU20S04016795W002 V3 Page 4 of 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 4 General Information 4.1 General Description of E.U.T. Product: Optiqo - Qlvr Box Model(s): OQB2020 Model Description: N/A GSM Band(s): GSM 850/900/1800/1900MHz GPRS/EGPRS Class: 12 NFC: Support Hardware Version: OPTIQO V3 Software Version: OPTIQO20200402 Note: N/A 4.2 Details of E.U.T. Operation Frequency: NFC:13.56MHz GPRS/EDGE 850: 824~849MHz GPRS/EDGE 1900: 1850~1910MHz Ratings: Battery DC 9V Reference No.: WTU20S04016795W002 V3 Page 5 of 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 5 Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTU20S04016795W002 V3 Page 6 of 7 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 6 RF Exposure Requirement: FCC Part 1.1307 Test Mode: The EUT work in test mode(Tx). 6.1 Procedures and Requirements A Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. 6.2 The procedures / limit FCC Part 1.1307: (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30…

Text truncated - open the document above for the full version.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 40 TEST REPORT Reference No. .................... : WTU20S04016795W003 V1 FCC ID ................................ : 2AIIH-OQB2020 Applicant ............................ : Optiqo Sweden AB Address .............................. : Roxviksgatan 8A, 58273 Linkoeping, Sweden Manufacturer .................... : Magnificent Cleaning Equipment Co., Ltd. Address .............................. : 369 Pujin Raod, Linhu Town, Wuzhong District, Suzhou 215105, China Product ............................... : Optiqo - Qlvr Box Model(s). ............................ : OQB2020 Brand Name ....................... : N/A Standards........................... : FCC CFR47 Part 22 Subpart H: 2018 FCC CFR47 Part 24 Subpart E: 2018 Date of Receipt sample .... : 2020-04-07 Date of Test ....................... : 2020-04-14 to 2020-06-14 Date of Issue ...................... : 2020-06-16 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Ford Wang / Project Engineer Philo Zhong / Manager Reference No.: WTU20S04016795W003 V1 Page 2 of 40 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ...................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 4 4 GENERAL INFORMATION .................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................... 5 4.2 DETAILS OF E.U.T. ......................................................................................................................................... 5 4.3 TEST MODE ..................................................................................................................................................... 6 4.4 TEST FACILITY ................................................................................................................................................. 6 5 TEST SUMMARY .................................................................................................................................................. 7 6 EQUIPMENT USED DURING TEST .................................................................................................................. 8 6.1 EQUIPMENTS LIST ........................................................................................................................................... 8 6.2 MEASUREMENT UNCERTAINTY ....................................................................................................................... 9 6.3 TEST EQUIPMENT CALIBRATION ..................................................................................................................... 9 7 RF OUTPUT POWER ......................................................................................................................................... 10 7.1 EUT OPERATION ........................................................................................................................................... 10 7.2 TEST PROCEDURE ........................................................................................................................................ 10 7.3 TEST RESULT ................................................................................................................................................ 11 8 PEAK-TO-AVERAGE RATIO ............................................................................................................................ 14 8.1 EUT OPERATION ........................................................................................................................................... 14 8.2 TEST PROCEDURE ........................................................................................................................................ 14 8.3 TEST RESULT ................................................................................................................................................ 15 9 BANDWIDTH ........................................................................................................................................................ 17 9.1 EUT OPERATION ........................................................................................................................................... 17 9.2 TEST PROCEDURE ........................................................................................................................................ 17 9.3 TEST RESULT ................................................................................................................................................ 18 10 SPURIOUS EMISSIONS AT ANTENNA TERMINALS ................................................................................. 21 10.1 EUT OPERATION ...................................................................................................................................... 21 10.2 TEST PROCEDURE ..................…

Text truncated - open the document above for the full version.

Appendix-OQB2020-Photos Page 2 of 9 2G Setup photo Model OQB2020 FCC ID: 2AIIH-OQB2020 For 30MHz-1000MHz Test Site 2# For Above 1000MHz Test Site 2#